☆ 4.5 Article

Wettability and corrosion resistance of zirconium nitride films obtained via reactive high-power impulse magnetron sputtering

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2023)

Related references

Note: Only part of the references are listed.

Article Multidisciplinary Sciences

Hybrid magnetron sputtering of ceramic superlattices for application in a next generation of combustion engines

Bruno Cesar Noronha Marques de Castilho et al.

Summary: A hybrid magnetron sputtering process was developed to manufacture nanostructured CrN/Cr1-xAlxN multilayers, which showed improved performance compared to commercial PVD coatings of CrN. Multilayer periodicities in the range of 5 to 10 nm yielded the best tribological performance.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Chemistry, Physical

Wetting and corrosion properties of CuxOy films deposited by magnetron sputtering for maritime applications

Jose D. Castro et al.

Summary: Copper-based materials can be safe and economic alternatives for producing anti-biofouling coatings. This study shows that oxygen incorporation into copper films can change their growth profile, and CuxOy coatings exhibit poor corrosion resistance and high ion release in seawater.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Electrochemical and Optical Behavior of ZrN-Ag Coatings Deposited by Means of DC Reactive Magnetron Sputtering Technique

Claudia P. Mejia et al.

Summary: The formation of nanostructured transition metal nitride coatings by introducing a small amount of silver has been proven to enhance the physical properties of these materials. This investigation studied the influence of silver on the chemical composition, morphology, and microstructure of ZrN coatings, as well as their functional properties including corrosion resistance and optical reflectance. The results showed that the incorporation of silver improved the corrosion resistance and increased the optical reflectance of the coatings, making them potentially useful as optical protective coatings.

COATINGS (2022)

Add to Collection

Article Materials Science, Coatings & Films

Corrosion resistance of Cu-Zr(O) N films in a simulated seawater environment

Jose D. Castro et al.

Summary: The study indicates that a novel zirconium (oxy)nitride coating doped with copper has potential for antibacterial, anticorrosion, and antibiofouling properties, but the addition of copper results in decreased corrosion resistance against seawater.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Electrochemistry

Synergetic effect of thickness and oxygen addition on the electrochemical behaviour of tantalum oxide coatings deposited by HiPIMS in DOMS mode

C. F. Almeida Alves et al.

Summary: The HiPIMS technique in DOMS mode was used to deposit tantalum (Ta) and Ta1-xOx films. After depositing pure metallic Ta and Ta1-xOx films with two different thicknesses, their structure, morphology and chemical composition were investigated. The study showed that increasing film thickness affects the mechanical and electrochemical properties of metallic coatings, while tantalum oxide films enhance the polarization resistance of non-reactive coatings.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article

Comparative Study on the Influence of Reactive Gas Flow Rate on the Growth and Properties of P-doped TiAlN Coatings Prepared by DcMS and HiPIMS

Olayinka Oluwatosin Abegunde et al.

Journal of Bio- and Tribo-Corrosion (2022)

Add to Collection

Review Materials Science, Multidisciplinary

A critical review of marine biofilms on metallic materials

B. Tuck et al.

Summary: The formation of multi-species biofilms on marine infrastructure leads to significant economic losses and lacks effective and environmentally friendly treatment methods. Incomplete understanding of natural biofilm development remains a major limitation for biofilm control measures.

NPJ MATERIALS DEGRADATION (2022)

Add to Collection

Review Polymer Science

Mechanical Properties of Protective Coatings against Marine Fouling: A Review

Alessandro Pistone et al.

Summary: The accumulation of marine organisms on ship hulls poses a global problem for maritime industries, with the use of biocide-containing paints threatening marine ecosystems. The focus is shifting towards non-biocidal solutions in protective coatings, particularly in developing hydrophobic coatings based on siloxane and epoxy resin for anti-fouling applications, with an emphasis on environmentally friendly and cost-effective solutions.

POLYMERS (2021)

Add to Collection

Article Chemistry, Physical

Cu oxidation mechanism on Cu-Zr(O)N coatings: Role on functional properties

Jose D. Castro et al.

Summary: Zirconium oxynitride (Zr(O)N) and Copper-Zirconium oxynitrides (Cu-Zr(O)N) were deposited on stainless steel substrates using DC reactive magnetron sputtering, with different oxygen contents achieved through a duty cycle controller. Chemical activation of the samples resulted in the antibacterial effect of CuZrON-DC100, where Cu reacted with O2- ions forming CuO. The multifunctionality of Cu-Zr (O)N coatings, combining aesthetic surface and antibacterial properties, was demonstrated.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Materials Science, Coatings & Films

REACH regulation challenge: Development of alternative coatings to hexavalent chromium for minting applications

E. Carneiro et al.

Summary: The REACH regulation enforced by the European Union has accelerated the search for alternative solutions to hexavalent chromium electrodeposition processes. Electroplated chromium coatings are widely used in applications requiring good mechanical and tribological properties. The study introduces Cr(Al,Si)N coatings as an alternative to hard chromium, showing outstanding mechanical properties and high resistance to wear.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Wear Behavior and Machining Performance of TiAlSiN-Coated Tools Obtained by dc MS and HiPIMS: A Comparative Study

Vitor F. C. Sousa et al.

Summary: A comparative study of TiAlSiN coating performance obtained by conventional direct current magnetron sputtering (dc MS) and novel high power impulse magnetron sputtering (HiPIMS) in milling duplex stainless-steel alloy LDX 2101 was conducted. The HiPIMS-obtained coating exhibited higher mechanical properties and less wear, particularly suitable for longer cutting lengths and tool life.

MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

ZrN-ZrOxNy vs -ZrO2-ZrOxNy coatings deposited via unbalanced DC magnetron sputtering

Gloria Cubillos et al.

Summary: ZrN-ZrOxNy and ZrO2-ZrOxNy coatings were deposited on 316L stainless steel substrates to improve corrosion resistance and evaluate biocompatibility with bone cells. Various analysis techniques confirmed the coatings' barrier-type protection against corrosion and the ability to support the growth of osteoblast cells, showing potential for use in osteosynthesis processes.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Materials Science, Coatings & Films

Surface functionalization of 3D printed structures: Aesthetic and antibiofouling properties

Jose D. Castro et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Automation & Control Systems

Tribological performance of hybrid surfaces: dimple-shaped anodized Al alloy surfaces coated with WS-CF sputtered thin films

S. P. Rodrigues et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

The influence of nitrogen on the morphology of ZrN coatings deposited by magnetron sputtering

Tatyana Kuznetsova et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Materials Science, Ceramics

Wear mechanisms identification using Kelvin probe force microscopy in TiN, ZrN and TiN/ZrN hard ceramic multilayers coatings

J. M. Gonzalez-Carmona et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Coatings & Films

High temperature tribological behaviour of TiSiN(Ag) films deposited by HiPIMS in DOMS mode

D. Cavaleiro et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

TiSiN(Ag) films deposited by HiPIMS working in DOMS mode: Effect of Ag content on structure, mechanical properties and thermal stability

D. Cavaleiro et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Corrosion, wear, and friction behavior of a number of multilayer two-, three- and multicomponent nitride coatings on different substrates, depending on the phase and elemental composition gradient

Anna Kameneva et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Electrochemical Corrosion of Nano-Structured Magnetron-Sputtered Coatings

Sebastian Calderon et al.

COATINGS (2019)

Add to Collection

Article Chemistry, Physical

Effects of Mo content on the interfacial contact resistance and corrosion properties of CrN coatings on SS316L as bipolar plates in simulated PEMFCs environment

Jie Jin et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

On the role of the energetic species in TiN thin film growth by reactive deep oscillation magnetron sputtering in Ar/N-2

J. C. Oliveira et al.

THIN SOLID FILMS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancement of the Corrosion Resistance of 304 Stainless Steel by Cr-N and Cr(N,O) Coatings

Mihaela Dinu et al.

COATINGS (2018)

Add to Collection

Article Physics, Applied

Tutorial: Reactive high power impulse magnetron sputtering (R-HiPIMS)

Andre Anders

JOURNAL OF APPLIED PHYSICS (2017)

Add to Collection

Article Materials Science, Coatings & Films

Corrosion resistance of Ni-based coatings deposited by spray and fuse technique varying oxygen flow

H. Jimenez et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

On the cohesion of fluids and their adhesion to solids: Young's equation at the atomic scale

J. -C. Fernandez-Toledano et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2017)

Add to Collection

Review Materials Science, Ceramics

Processing and properties of ZrC, ZrN and ZrCN ceramics: a review

R. W. Harrison et al.

ADVANCES IN APPLIED CERAMICS (2016)

Add to Collection

Article Chemistry, Physical

Antibacterial Ag/a-C nanocomposite coatings: The influence of nano-galvanic a-C and Ag couples on Ag ionization rates

N. K. Manninen et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Materials Science, Coatings & Films

Evaluation of Stoney equation for determining the internal stress of DLC thin films using an optical profiler

Sheida Shiri et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Coatings & Films

CrN thin films deposited by HiPIMS in DOMS mode

F. Ferreira et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Rice and Butterfly Wing Effect Inspired Low Drag and Antifouling Surfaces: A Review

Gregory D. Bixler et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2015)

Add to Collection

Article Chemistry, Physical

The wetting of steel, DLC coatings, ceramics and polymers with oils and water: The importance and correlations of surface energy, surface tension, contact angle and spreading

M. Kalin et al.

APPLIED SURFACE SCIENCE (2014)

Add to Collection

Article Materials Science, Coatings & Films

ZrN coatings deposited by high power impulse magnetron sputtering and cathodic arc techniques

Yashodhan Purandare et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2014)

Add to Collection

Article Materials Science, Multidisciplinary

The influence of various sputtering parameters on structural, wettability and optical properties of Zr2ON2 thin films

Sushant K. Rawal et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2014)

Add to Collection

Article Materials Science, Coatings & Films

Corrosion resistance of niobium carbide coatings produced on AISI 1045 steel via thermo-reactive diffusion deposition

Alejandro OrjuelaG et al.

SURFACE & COATINGS TECHNOLOGY (2014)

Add to Collection

Review Materials Science, Multidisciplinary

Nano and Microscale Topographies for the Prevention of Bacterial Surface Fouling

Mary V. Graham et al.

COATINGS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Fluid Drag Reduction with Shark-Skin Riblet Inspired Microstructured Surfaces

Gregory D. Bixler et al.

ADVANCED FUNCTIONAL MATERIALS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

A structure zone diagram including plasma-based deposition and ion etching

Andre Anders

THIN SOLID FILMS (2010)

Add to Collection

Article Instruments & Instrumentation

Compositional and structural changes in ZrOxNy films depending on growth condition

P. Carvalho et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2006)

Add to Collection

Article Physics, Applied

Structural, electrical, optical, and mechanical characterizations of decorative ZrOxNy thin films -: art. no. 023715

P Carvalho et al.

JOURNAL OF APPLIED PHYSICS (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Optical and electronic properties of magnetron sputtered ZrNx thin films

R Lamni et al.

THIN SOLID FILMS (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Bias effect of ion-plated zirconium nitride film on Si(100)

WJ Chou et al.

THIN SOLID FILMS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.