☆ 4.7 Article

Chemical process modelling using the extracted informative data sets based on attenuating excitation inputs

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2023)

Related references

Note: Only part of the references are listed.

Article Automation & Control Systems

Extended dynamic mode decomposition for two paradigms of non-linear dynamical systems

John Leventides et al.

Summary: In this study, the Koopman operator theory and Extended Dynamic Mode Decomposition are applied to two non-linear dynamical systems. The first system is the 3 x + 1-system, which is discrete and follows the Collatz conjecture. The second system is the SIR-model, which is continuous and describes the evolution of a disease in a population. The Koopman operator captures the dynamics of non-linear systems, but it is infinite dimensional. Therefore, finite dimensional linear systems are approximated to analyze these systems, providing insights and predictions for the 3 x + 1-problem and SIR-model.

JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS (2023)

Add to Collection

Article Green & Sustainable Science & Technology

Dynamic hybrid modeling of fuel ethanol fermentation process by integrating biomass concentration XGBoost model and kinetic parameter artificial neural network model into mechanism model

Xinzhe Li et al.

Summary: A dynamic hybrid model is proposed for modeling the fuel ethanol fermentation process. It includes a biomass concentration prediction model based on extreme gradient boosting and an artificial neural network-based model to determine the time-varying kinetic parameters. Experimental results demonstrate satisfactory accuracy in predicting biomass, ethanol, and glucose concentrations.

RENEWABLE ENERGY (2023)

Add to Collection

Article Engineering, Chemical

Reconstruction and prediction of rising bubble by Lagrange DMD in data-driven

Yuhui Yin et al.

Summary: This paper aims to predict the 2D bubble rising process using a data-driven method and improve the modeling ability of Lagrangian DMD. In the simple case without bubble deformation, Lagrangian DMD shows significantly better reconstruction and prediction results than DMD. However, in a complex case with bubble deformation, Lagrangian DMD cannot provide satisfactory prediction results. After adding velocity prediction to the Lagrangian DMD method, the prediction of bubble rising has been improved.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2023)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Physics-guided neural networks with engineering domain knowledge for hybrid process modeling

Ethan Gallup et al.

Summary: As neural networks are increasingly used in science and engineering, incorporating scientific knowledge into these networks has become more complex. This work simplifies these techniques into basic strategies that can be easily applied in different situations. The study builds novel neural networks based on these strategies, and evaluates their advantages using simulated data from a CSTR model.

COMPUTERS & CHEMICAL ENGINEERING (2023)

Add to Collection

Article Engineering, Chemical

Simultaneous separation of ternary mixture using modified dual compression middle vessel batch distillation column: Control and dynamic optimization

Bharath Desikan et al.

Summary: This article presents a fast middle vessel batch distillation method for the ternary separation of an Ethanol/Propanol/Butanol mixture, which utilizes vapor compression to improve efficiency and reduce energy consumption.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2022)

Add to Collection

Article Agricultural Engineering

Multivariable advanced nonlinear controller for bioethanol production in a non-isothermal fermentation bioreactor

Malek G. Hajaya et al.

Summary: This study developed a multi-input, multi-output advanced nonlinear control structure for a continuous, non-isothermal, constant volume fermentation bioreactor. Feedback linearization control was used to regulate glucose concentration, and backstepping control was used to regulate reactor temperature. A novel estimator for biomass concentration was incorporated to provide online estimates for the unmeasurable state variable. The control structure demonstrated the ability to efficiently establish a combination of dynamic and fixed set points despite disturbances in the bioreactor feed temperature and glucose concentration.

BIORESOURCE TECHNOLOGY (2022)

Add to Collection

Article Engineering, Chemical

Physics-informed neural networks for hybrid modeling of lab-scale batch fermentation for ß-carotene production using Saccharomyces cerevisiae

Mohammed Saad Faizan Bangi et al.

Summary: In this study, a hybrid model was built using the universal differential equations (UDEs) approach to accurately approximate the unknown dynamics of the batch fermentation process, thereby increasing the overall accuracy of the model. Prior knowledge about the process was incorporated during the hybrid model training to ensure faster convergence of its parameters.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2022)

Add to Collection

Article Engineering, Chemical

Incorporating machine learning for thermal engines modeling in industrial waste heat recovery

Francisco Javier Lopez-Flores et al.

Summary: This paper proposes a methodology for efficient, accurate, and sustainable waste heat recovery in industrial plants. It combines pinch analysis, mathematical equations, machine learning models, and an optimization algorithm. The methodology considers the economic, environmental, and social aspects and provides optimal operating conditions for thermal engines using different fuels.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2022)

Add to Collection

Article Engineering, Chemical

Modeling and Control of Nonlinear Processes Using Sparse Identification: Using Dropout to Handle Noisy Data

Fahim Abdullah et al.

Summary: SINDy is a nonlinear modeling technique that shows superior performance in handling time-series data but requires careful consideration of noise. In this study, SINDy is combined with ensemble learning to identify multiple models for improving overall nonlinear model performance.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Add to Collection

Article Engineering, Environmental

Deep neural network-based hybrid modeling and experimental validation for an industry-scale fermentation process: Identification of time-varying dependencies among parameters

Parth Shah et al.

Summary: Kinetic modeling of fermentation processes is challenging, but data-driven and hybrid models offer potential solutions. In this study, a hybrid model combining kinetic and deep neural network approaches was developed to improve accuracy and robustness, enabling accurate predictions of fermentation processes.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Chemical

A soft sensor regression model for complex chemical process based on generative adversarial nets and vine copula

Hongmin Chen et al.

Summary: This paper proposes a soft sensor method based on generative adversarial nets and vine copula regression (GAN-VCR) to predict key variables in complex industrial processes. The method uses generative adversarial nets to generate samples with a similar distribution to the labeled samples and employs a sample selection strategy based on the generalized local probability index to enhance the training samples. Experimental results demonstrate the effectiveness and practicality of the proposed method.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2022)

Add to Collection

Review Engineering, Mechanical

Physics-informed neural networks (PINNs) for fluid mechanics: a review

Shengze Cai et al.

Summary: Significant progress has been made in simulating flow problems over the last 50 years, but challenges remain in incorporating noisy data, complex mesh generation, and solving high-dimensional problems. Physics-informed neural networks (PINNs) have been demonstrated as effective in solving inverse flow problems related to various fluid dynamics scenarios.

ACTA MECHANICA SINICA (2021)

Add to Collection

Article Engineering, Multidisciplinary

On the eigenvector bias of Fourier feature networks: From regression to solving multi-scale PDEs with physics-informed neural networks

Sifan Wang et al.

Summary: PINNs show promise in integrating physical models with observational data, but struggle with high-frequency or multi-scale features. Through NTK theory, this work investigates the limitations of PINNs and proposes novel architectures to address these challenges.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

Add to Collection

Article Biotechnology & Applied Microbiology

Dynamic control of heat pump assisted extractive distillation process for separation of ethyl acetate/isopropanol/water mixture

Baoming Shan et al.

Summary: This study investigates dynamic control structures of the extractive distillation process and heat pump combined with feeding preheating extractive distillation process, and tests their control performance. The results show that the improved structure can effectively maintain product purity, and the composition controller helps improve control performance.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2021)

Add to Collection

Article Thermodynamics

Physics-Informed Neural Networks for Heat Transfer Problems

Shengze Cai et al.

Summary: Physics-informed neural networks (PINNs) have gained popularity in engineering fields for their effectiveness in solving realistic problems with noisy data and partially missing physics. Through automatic differentiation to evaluate differential operators and defining a multitask learning problem, PINNs have been applied to various heat transfer problems, bridging the gap between computational and experimental heat transfer.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2021)

Add to Collection

Article Engineering, Chemical

Evolutionary optimization based pseudo labeling for semi-supervised soft sensor development of industrial processes

Huaiping Jin et al.

Summary: This study introduces two novel semi-supervised soft sensor methods, which frame the issue of unlabeled data as an optimization problem and utilize evolutionary optimization method and Gaussian process regression to enhance prediction performance by combining labeled and high-confidence pseudo-labeled data.

CHEMICAL ENGINEERING SCIENCE (2021)

Add to Collection

Editorial Material Engineering, Industrial

Machine learning in manufacturing and industry 4.0 applications

Rahul Rai et al.

Summary: Machine learning techniques in the context of Industry 4.0 have significantly impacted the manufacturing industry by enabling smart factories, improving efficiency, and offering predictive insights, but they also face challenges such as big data management, real-time intelligence extraction, and cybersecurity concerns.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2021)

Add to Collection

Article Engineering, Chemical

Comparison of heterogeneous azeotropic distillation and energy-saving extractive distillation for separating the acetonitrile-water mixtures

Jun Qi et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Mathematics, Applied

fPINNs: FRACTIONAL PHYSICS-INFORMED NEURAL NETWORKS

Guofei Pang et al.

SIAM JOURNAL ON SCIENTIFIC COMPUTING (2019)

Add to Collection

Article Mathematics, Applied

Data-Driven Model Reduction and Transfer Operator Approximation

Stefan Klus et al.

JOURNAL OF NONLINEAR SCIENCE (2018)

Add to Collection

Article Engineering, Chemical

Esterification of glycerol and acetic acid in a pilot-scale reactive distillation column: Experimental investigation, model validation, and process analysis

Hong Li et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2018)

Add to Collection

Article Engineering, Chemical

A novel approach to promptly control product quality in precise distillation columns based on pressure dynamic modeling

Dong Huang et al.

ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING (2018)

Add to Collection

Article Engineering, Chemical

Heat-integrated pressure-swing distillation process for separation of the maximum-boiling azeotrope diethylamine and methanol

Qingjun Zhang et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2018)

Add to Collection

Proceedings Paper Automation & Control Systems

Informative Conditions for Identification of MISO ARMAX Model in Closed-loop Systems

Wengang Yan et al.

IFAC PAPERSONLINE (2018)

Add to Collection

Article Engineering, Chemical

Design and control of hybrid heat-integrated configuration for an ideal indirect reactive distillation process

Tyng-Lih Hsiao et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)

Add to Collection

Article Engineering, Chemical

Efficient separation method for tert-butanol dehydration via extractive distillation

Ka-Man Lo et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Development of local dynamic mode decomposition with control: Application to model predictive control of hydraulic fracturing

Abhinav Narasingam et al.

COMPUTERS & CHEMICAL ENGINEERING (2017)

Add to Collection

Article Automation & Control Systems

Analysis of over-sampling based identification

Mengyuan Fang et al.

AUTOMATICA (2017)

Add to Collection

Article Automation & Control Systems

Identifiability and excitation of linearly parametrized rational systems

Michel Gevers et al.

AUTOMATICA (2016)

Add to Collection

Article Automation & Control Systems

The Box-Jenkins Steiglitz-McBride algorithm

Yucai Zhu et al.

AUTOMATICA (2016)

Add to Collection

Article Multidisciplinary Sciences

Discovering governing equations from data by sparse identification of nonlinear dynamical systems

Steven L. Brunton et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Add to Collection

Article Mathematics, Applied

A Data-Driven Approximation of the Koopman Operator: Extending Dynamic Mode Decomposition

Matthew O. Williams et al.

JOURNAL OF NONLINEAR SCIENCE (2015)

Add to Collection

Article Engineering, Chemical

An Algorithm for Finding Process Identification Intervals from Normal Operating Data

Andre C. Bittencourt et al.

PROCESSES (2015)

Add to Collection

Review Mechanics

Analysis of Fluid Flows via Spectral Properties of the Koopman Operator

Igor Mezic

ANNUAL REVIEW OF FLUID MECHANICS, VOL 45 (2013)

Add to Collection

Article Engineering, Chemical

Fisher information matrix based time-series segmentation of process data

Laszlo Dobos et al.

CHEMICAL ENGINEERING SCIENCE (2013)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Data quality assessment of routine operating data for process identification

Yuri A. W. Shardt et al.

COMPUTERS & CHEMICAL ENGINEERING (2013)

Add to Collection

Article Engineering, Chemical

Design and simulation of a reactive distillation process to produce high-purity ethyl acetate

Yadollah Tavan et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2013)

Add to Collection

Article Automation & Control Systems

Necessary and sufficient conditions for uniqueness of the minimum in Prediction Error Identification

A. S. Bazanella et al.

AUTOMATICA (2012)

Add to Collection

Article Automation & Control Systems

Prediction error method for identification of LPV models

Yu Zhao et al.

JOURNAL OF PROCESS CONTROL (2012)

Add to Collection

Article Engineering, Chemical

Recursive weighted kernel regression for semi-supervised soft-sensing modeling of fed-batch processes

Jun Ji et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2012)

Add to Collection

Article Automation & Control Systems

Outlier detection for process control data based on a non-linear Auto-Regression Hidden Markov Model method

Fang Liu et al.

TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL (2012)

Add to Collection

Article Mathematics, Applied

Convergence of stochastic gradient estimation algorithm for multivariable ARX-like systems

Yanjun Liu et al.

COMPUTERS & MATHEMATICS WITH APPLICATIONS (2010)

Add to Collection

Article Automation & Control Systems

Identification and the Information Matrix: How to Get Just Sufficiently Rich?

Michel Gevers et al.

IEEE TRANSACTIONS ON AUTOMATIC CONTROL (2009)

Add to Collection

Article Automation & Control Systems

Combined parameter and output estimation of dual-rate systems using an auxiliary model

F Ding et al.

AUTOMATICA (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.