☆ 4.7 Article

Rapidly achieving a reliable full-ceramic interface of ZrC-SiC composite using Ti interlayer via pulsed electric current joining

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Effects of the joining process on the microstructure and properties of liquid phase-sintered SiC-SiC joints formed with Ti foil

Li-Xiang Wu et al.

Summary: It was found that suitable joining pressure can increase the shear strength of SiC joints, while the joining atmosphere also affects the microstructure and shear strength of the joints. By examining the composition and microstructure of the interlayer, a SiC-SiC joining under argon environment was achieved, offering a cost-effective approach and expanding the applications of SiC ceramic components with complex shapes.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Joining of Ti-coated monolithic SiC using a SiCw/Ti3SiC2 filler by electric field-assisted sintering

Teng Yu et al.

Summary: Monolithic SiC was successfully joined using a SiC whisker-reinforced Ti3SiC2 composite filler via electric field-assisted sintering technique, achieving a joint strength higher than 250 MPa. Optimization of process parameters and the addition of up to 15 wt. % SiC whiskers improved joint strength, but a lower joint strength was observed with 20 wt. % SiC whisker addition due to thermal expansion mismatch.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Microstructure evolution and mechanical properties of YAG/YAG joint using bismuth-borate glass

Jincheng Lin et al.

Summary: The research focused on the reaction mechanism and microstructure evolution of YAG and glass filler, leading to the fabrication of a composite material with superior mechanical properties at high temperatures.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Flash joining of alumina ceramics under a small current density

Junbo Xia et al.

Summary: Ceramic joining using electric field has attracted significant research attention for its reduced joining barrier and improved reliability, but the mechanism behind E-field assisted joining is still unclear. Joining alumina ceramics using a small current showed that E-field can generate defects and promote the joining process by facilitating ionic diffusion. Results also demonstrated a significant difference in joint strength when E-field was applied in perpendicular and parallel directions to the faying surfaces.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Low temperature seamless joining of SiC using a Ytterbium film

Lin-Kun Shi et al.

Summary: The study successfully achieved seamless joining of monolithic SiC at a low temperature using electric field-assisted sintering technology, with Yb coating on SiC forming Yb3Si2C2 to create almost completely seamless joints. The high bending strength of the joints indicates a sound connection, potentially useful for SiC-based composites.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Interfacial energy as the driving force for diffusion bonding of ceramics

S. Kovacevic et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Electromigration effect in Fe-Al diffusion couples with field-assisted sintering

Haoren Wang et al.

ACTA MATERIALIA (2020)

Add to Collection

Review Materials Science, Multidisciplinary

A review of multi-physical fields induced phenomena and effects in spark plasma sintering: Fundamentals and applications

Zheng-Yang Hu et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Spark plasma assisted diffusion bonding of titanium and stainless steel: Role of pulse current in diffusion kinetics and microstructural evolution

K. Ananthakumar et al.

VACUUM (2020)

Add to Collection

Article Physics, Applied

The preferential growth behaviors of the intermetallics at the W/Co interface during spark plasma sintering

Shenghua Deng et al.

APPLIED PHYSICS LETTERS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

One-second flash joining of zirconia ceramic by an electric field at low temperatures

Junbo Xia et al.

SCRIPTA MATERIALIA (2019)

Add to Collection

Article Materials Science, Ceramics

Flash joining of conductive ceramics in a few seconds by flash spark plasma sintering

Mattia Biesuz et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Ceramics

Sintering temperature effect on microstructure, mechanical and electrical properties of multi-layered ZrB2-based ceramics with thin Ti interlayer

Yuhang Bai et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Microstructural evolution and growth/degradation behavior of in situ TiB whiskers in ZrB2-SiC joints using Ti/Ni/Ti filler

Weiqi Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Materials Science, Ceramics

Using macroporous graphene networks to toughen ZrC-SiC ceramic

Yehong Cheng et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Add to Collection

Review Chemistry, Physical

Application of High-Density Electropulsing to Improve the Performance of Metallic Materials: Mechanisms, Microstructure and Properties

Yinying Sheng et al.

MATERIALS (2018)

Add to Collection

Article Materials Science, Ceramics

Cross-diffusion phenomena within a ZrCx - Zr - ZrCx joint

Rui Pan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Stress-induced orientation relationship variation for phase transformation of α-Ti to β-Ti during high speed machining Ti-6Al-4V

Qingqing Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Current on Diffusivity in Metal Hexaborides: A Spark Plasma Sintering Study

James T. Cahill et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Materials Science, Ceramics

Effect of heat treatment on the decomposition of TiC-ZrC solid solutions by spark plasma sintering

Ying Li et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Homogenization of the zirconium carbide-titanium interface domain

Rui Pan et al.

SCRIPTA MATERIALIA (2016)

Add to Collection

Article Materials Science, Ceramics

Spark plasma sintering of TiC-ZrC composites

Ying Li et al.

CERAMICS INTERNATIONAL (2015)

Add to Collection

Article Engineering, Biomedical

Comparative study of Weibull characteristic strength and mean strength of GPCs to confirm the minimum number of samples needed for confident strength reporting

Cina Mehrvar et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal stability and growth kinetics of the interfacial TiC layer in the Ti alloy/carbon steel system

Aslan Miriyev et al.

ACTA MATERIALIA (2014)

Add to Collection

Article Thermodynamics

Effect of carbon vacancies on thermodynamic properties of TiC-ZrC mixed carbides

V. I. Razumovskiy et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2014)

Add to Collection

Article Materials Science, Ceramics

Oxidation behavior of spark plasma sintered ZrC-SiC composites obtained from the polymer-derived ceramics route

David Pizon et al.

CERAMICS INTERNATIONAL (2014)

Add to Collection

Article Materials Science, Ceramics

Electroplating assisted diffusion bonding of ZrC-SiC composite for full ceramic joints

Changbao Song et al.

CERAMICS INTERNATIONAL (2014)

Add to Collection

Article Materials Science, Ceramics

Joining of C/SiC composites by spark plasma sintering technique

Stefano Rizzo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

Add to Collection

Article Materials Science, Ceramics

Joining of β-SiC by spark plasma sintering

Salvatore Grasso et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

Add to Collection

Article Materials Science, Ceramics

Fabrication and mechanical properties of laminated HfC-SiC/BN ceramics

Liuyi Xiang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Analysis on the mechanical strength of WC-Co cemented carbides under uniaxial and biaxial bending

Y. Torres et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Chemistry, Physical

Strong, tough and stiff bioinspired ceramics from brittle constituents

Florian Bouville et al.

NATURE MATERIALS (2014)

Add to Collection

Article Thermodynamics

First-principles calculations of phase stability in the Ti-Zr-Si ternary system

Catherine Colinet et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Advances in Transient-Liquid-Phase Bonding of Ultra-high Temperature ZrC Ceramics

Diletta Sciti et al.

HIGH TEMPERATURE MATERIALS AND PROCESSES (2012)

Add to Collection

Article Materials Science, Ceramics

Oxidation of ZrC-30 vol% SiC composite in air from low to ultrahigh temperature

Liyou Zhao et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Temperature-gradient joining of Ti-6Al-4V alloys by pulsed electric current sintering

Daihua He et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection

Article Chemistry, Physical

Low temperature sintering of ZrC-SiC composite

Liyou Zhao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Add to Collection

Article Materials Science, Ceramics

Spark Plasma Joining of ZrB2-SiC Composites Using Zirconium-Boron Reactive Filler Layers

William Ross Pinc et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)

Add to Collection

Article Materials Science, Multidisciplinary

A study of the densification mechanisms during spark plasma sintering of zirconium (oxy-)carbide powders

M. Gendre et al.

ACTA MATERIALIA (2010)

Add to Collection

Review Materials Science, Multidisciplinary

Consolidation/synthesis of materials by electric current activated/assisted sintering

Roberto Orru et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of pulsed DC current on atomic diffusion of Nb-C diffusion couple

Takayuki Kondo et al.

JOURNAL OF MATERIALS SCIENCE (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Spark plasma sintering and mechanical behaviour of ZrC-based composites

Diletta Sciti et al.

SCRIPTA MATERIALIA (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.