☆ 4.6 Article

Optimization and Fabrication of Binder-Free Nickel-Copper Phosphate Battery-type Electrode Using Microwave-Assisted Hydrothermal Method

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Microsheets like nickel cobalt phosphate thin films as cathode for hybrid asymmetric solid-state supercapacitor: Influence of nickel and cobalt ratio variation

Supriya J. Marje et al.

Summary: A rational combination of metal cations is necessary for improved electrochemical energy storage performance of bimetal compounds. Adjusting the ratio of nickel and cobalt can enhance the physicochemical properties and electrochemical capacitive performances of nickel cobalt phosphate materials. The synergy between nickel and cobalt species in the thin film electrodes contributes to the excellent electrochemical capacitive performance of hybrid asymmetric devices.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Asymmetric supercapacitors based on porous MnMoS4 nanosheets-anchored carbon nanofiber and N, S-doped carbon nanofiber electrodes

Md Wasi Ahmad et al.

Summary: An advanced flexible hybrid electrode material composed of porous manganese molybdenum sulfide nanosheets supported on flexible carbon nanofiber mat has been prepared. The material exhibits high specific capacitance and good capacity retention, and shows excellent capacitive performance in asymmetric supercapacitor devices.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Physical

Facile Synthesis of Bimetal Nickel Cobalt Phosphate Nanostructures for High-Performance Hybrid Supercapacitors

Min Li et al.

Summary: In this study, bimetal nickel-cobalt phosphate nanostructures were successfully synthesized on nickel foam for hybrid supercapacitors by a facile one-step electrodeposition method. The optimized NiCoP/NF2 electrode exhibited excellent capacitive performance with high specific capacity, good rate performance, and high coulombic efficiency. The proposed electrodeposition synthesis process and the prepared NiCoP composites show great potential for applications in energy storage technology.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Analytical

Facile stepwise hydrothermal synthesis of hierarchical CoMoO4/CoMoO4 core/shell dandelion-like nanoarrays: A promising binder-free positive electrode for high-performance asymmetric supercapacitors

Maryam Alsadat Mohammadi et al.

Summary: This study successfully fabricated a flexible supercapacitor with outstanding pseudocapacitive performance using hierarchical CoMoO4/CoMoO4 core/shell dandelion-like nanoarrays. The flexible asymmetric supercapacitor device assembled based on this material exhibited remarkable electrochemical performance, including good specific capacitance and high energy and power densities. These results indicate great potential for developing energy storage devices using heterostructure nanomaterials.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

Add to Collection

Article Materials Science, Coatings & Films

Fabrication of binary metal phosphate-based binder-free electrode for new generation energy storage device

Yu Yi How et al.

Summary: This study aims to optimize the fabrication parameters of NiFe-P electrode for high areal capacity in supercapattery. The study uses a one-step hydrothermal synthesis method and central composite design (CCD) to optimize the performance. The optimized electrode shows high specific capacity and excellent stability.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Insights into corrosion resistance enhancement of nickel-phosphorus metallic glass in acid environment by the incorporation of copper

Jie Chen et al.

Summary: The study found that the cluster size in the Ni-Cu-P amorphous coating initially decreased and then increased with an increase in Cu content. Amorphous coatings with relatively smaller ordered clusters showed better corrosion resistance. In 5 wt% H2SO4 solution, a compact phosphate and hypophosphate passive film was generated on the Ni-Cu-P coating with n-type semiconductor characteristics.

VACUUM (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Improvement of extraction and stability of anthocyanins, the natural red pigment from roselle calyces using supercritical carbon dioxide extraction

Zuhaili Idham et al.

Summary: In this study, anthocyanins were extracted from roselle calyces using supercritical carbon dioxide (SC-CO2). Optimal conditions for extraction were determined, resulting in the highest levels of anthocyanins, phenolic compounds, and flavonoids. The SC-CO2 extract was analyzed using ultra-high-performance liquid chromatography (UHPLC) to identify and quantify specific compounds. The results showed that SC-CO2 extraction had lower degradation rates and longer half-lives compared to conventional solid-liquid extraction (SLE) methods.

JOURNAL OF CO2 UTILIZATION (2022)

Add to Collection

Review Energy & Fuels

Supercapattery: Merging of battery-supercapacitor electrodes for hybrid energy storage devices

Muhammad Zahir Iqbal et al.

Summary: Supercapattery devices have attracted attention for their high specific energy without compromising specific power, and utilizes advanced materials for improved performance. However, challenges remain in increasing energy density without affecting power density.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Energy & Fuels

Magnetron sputtered tungsten di-sulfide: An efficient battery grade electrode for supercapattery devices

Shahid Alam et al.

Summary: Tungsten disulfide (WS2) with different thicknesses were deposited by magnetron sputtering technique in this study, with the 250 nm thickness showing the best performance in supercapattery applications. The sputtered WS2 demonstrated high specific capacity and energy density, making it a promising electrode material for supercapattery devices.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Materials Science, Ceramics

Tensile and stressed-oxidation behavior of 2D SiC/BN/SiC composites at Intermediate Temperatures in Air

Xiao Han et al.

Summary: The stressed-oxidation behavior of 2D CVI SiC/BN/SiC composites at intermediate temperatures was studied, revealing a decrease in ultimate tensile strength and rupture life. Analysis of element composition and fracture morphologies showed an increase in oxidation degree correlating with fiber degradation and local fiber failure, ultimately leading to composite rupture.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Self-assembled MOF derived Co@C/rGO as positive electrode material for a supercapattery with high energy density

Honglu Wu et al.

Summary: Co@C core-shell particles with a uniform size of approximately 100 nm anchored on rGO nano sheets were synthesized via a one-pot hydrothermal process. The resulting calcined Co@C/rGO electrode exhibited high specific capacity and stability.

DIAMOND AND RELATED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Wave-absorbing properties of Ni-Zn ferrites loaded on coal-based, densely porous light carbon functional materials

Guanqun Gong et al.

Summary: CPC-loaded Ni-Zn ferrite composites prepared by microwave solid-phase reaction exhibit excellent wave absorption properties that can meet the requirements of multiple frequency bands.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Optimisation of HVOF Spray Process Parameters to Achieve Minimum Porosity and Maximum Hardness in WC-10Ni-5Cr Coatings

Pradeep Raj Rajendran et al.

Summary: High-velocity oxy-fuel (HVOF) spray coating is important for surface treatment, providing low oxide content due to shorter exposure time. Porosity and hardness are key factors affecting wear and corrosion behavior. This study aims to optimize HVOF process parameters to achieve low porosity and high hardness in WC-10Ni-5Cr coating.

COATINGS (2022)

Add to Collection

Review Energy & Fuels

A review on the recent advances in binder-free electrodes for electrochemical energy storage application

Ong Gerard et al.

Summary: This review discusses the progress in binder-free synthesis techniques, focusing on microwave-assisted hydrothermal synthesis for fabricating electrodes in electrochemical energy storage devices. It compares the advantages of this approach with conventional methods and critically analyzes its commercial viability and future opportunities.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Energy & Fuels

Facile synthesis of a binary composite from watermelon rind using response surface methodology for supercapacitor electrode material

Nurizan Omar et al.

Summary: This study reports a novel binary composite material BCWR derived from watermelon rind, which can serve as an electrode for supercapacitors, and optimized the synthesis process parameters such as pyrolysis temperature, pyrolysis time, and biomass to metal oxide ratio. The experimental validation shows that BCWR has the potential to be a superior electrode material for energy storage applications.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Thermodynamics

Grasshopper optimization algorithm for diesel engine fuelled with ethanol-biodiesel-diesel blends

Ibham Veza et al.

Summary: The recently invented grasshopper optimization algorithm (GOA) was used to optimize the performance and emissions of a diesel engine running on a ternary fuel blend. Regression modeling was used to calculate the mathematical equations between the factors (ethanol ratio, biodiesel ratio, engine load) and the responses (BSFC, BTE, HC, CO2, NOx, CO). The results showed that the grasshopper optimization algorithm successfully maximized BTE and minimized the other responses, indicating its potential for improving engine performance and emissions.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Add to Collection

Article Materials Science, Ceramics

A new approach to understanding the interaction effect of salt and plasticizer on solid polymer electrolytes using statistical model and artificial intelligence algorithm

Abdullahi Abbas Adam et al.

Summary: Solid polymer electrolytes (SPEs) based on natural biopolymeric macromolecules have great potential due to their abundance, low cost, biocompatibility, and biodegradability. However, their low ionic conductivity poses a challenge. In this study, response surface methodology (RSM) and artificial neural network (ANN) were used to optimize the performance of pectin/methylcellulose (PC/MC) based SPE complexed with potassium phosphate (K3PO4) and glycerol, resulting in improved conductivity and potential window.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2022)

Add to Collection

Article Chemistry, Physical

Hydrothermal Synthesis of Binder-Free Metallic NiCo2O4 Nano-Needles Supported on Carbon Cloth as an Advanced Electrode for Supercapacitor Applications

Qasim Abbas et al.

Summary: Designing electrochemical energy conversion and storage materials with excellent performance is of great significance to meet the growing energy demand. This study demonstrates the synthesis of binder-free bimetallic NiCo2O4 nano-needles supported on CC (NCO@CC) through a facile and scalable hydrothermal process. The electrode exhibits excellent electrical conductivity and interconnected nanostructure, leading to outstanding electrochemical performances with high specific capacitance and capacitance retention even after a large number of cycles. The NCO@CC nano-needle array-structured electrode shows potential as a candidate for supercapacitor applications.

MATERIALS (2022)

Add to Collection

Review Energy & Fuels

A review on the binder-free electrode fabrication for electrochemical energy storage devices

Yu Yi How et al.

Summary: This paper critically reviews different binder-free fabrication technologies for electrochemical energy storage (EES) devices and discusses their advantages, limitations, and suitability. The selection of suitable electrodes plays a significant role in the performance of EES devices, and recent literature has been analyzed to explore the operating mechanisms and conditions, as well as the structure, morphology, and performance of fabricated electrodes.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Energy & Fuels

Hydrothermally synthesized nickel copper phosphate thin film cathodes for high-performance hybrid supercapacitor devices

Sachin S. Pujari et al.

Summary: Transition metal phosphate-based materials possess excellent conductivity and rich redox activity. Nickel-copper phosphate thin films without binders were grown directly on stainless steel substrates through hydrothermal method, showing morphological changes with increasing copper content. The optimal nickel-copper ratio demonstrated high specific capacitance. Moreover, hybrid aqueous supercapacitor and all-solid-state supercapacitor electrochemical energy storage devices exhibited superior performance and long-term durability.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Chemistry, Analytical

Machine learning guided electrochemical sensor for passive sweat cortisol detection

Sarah Shahub et al.

Summary: This study developed a noninvasive sensor on a flexible, nano-porous substrate to detect cortisol from human sweat passively. A machine learning algorithm was developed to analyze sensor data and detect rising and falling trends of cortisol. The study demonstrated high accuracy and a wide response range for the sensor.

SENSING AND BIO-SENSING RESEARCH (2022)

Add to Collection

Article Environmental Sciences

Catalytic efficiency of raw and hydrolyzed eggshell in the oxidation of crystal violet and dye bathing wastewater by thermally activated peroxide oxidation method

Erdal Yabalak et al.

Summary: In this study, hydrochar-based-eggshell was prepared and used as a catalyst in the thermally activated peroxide oxidation approach for crystal violet and dye bathing wastewater degradation. The catalytic activity of the hydrochar-based-eggshell was found to be higher than that of the raw eggshell. The study demonstrated the potential of hydrolyzed eggshells in the oxidation of crystal violet and dye bathing wastewater.

ENVIRONMENTAL RESEARCH (2022)

Add to Collection

Article Electrochemistry

Amorphous S-doped NixCo3-xO4 for high-performance asymmetric supercapacitors

Yanhua Li et al.

Summary: Amorphous S-doped NixCo3-xO4 materials with excellent electrochemical performance were successfully synthesized by changing the additive in a mixed solution. The materials exhibit optimum Ni/Co ratio, minimum O/S ratio, proper morphology and structure, showing high specific capacitance, good rate capability, and cycling stability. Moreover, an asymmetric supercapacitor based on the materials achieves outstanding energy density and cycling stability.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Chemistry, Physical

A binder-free facile synthetic approach for amorphous, hydrous nickel copper phosphate thin film electrode preparation and its application as a highly stable cathode for hybrid asymmetric supercapacitors

Sachin S. Pujari et al.

Summary: This study demonstrates the synthesis of amorphous, hydrous nickel copper phosphate thin film using a simple and cost-effective method. The resulting film exhibits excellent electrochemical performance and is used as a cathode in hybrid supercapacitors, leading to high performance and long-term durability.

SUSTAINABLE ENERGY & FUELS (2022)

Add to Collection

Article Engineering, Multidisciplinary

Morphology control in nickel cobaltite synthesised via solution routes for electrochemical applications

Nimisha Girija et al.

Summary: Research on the synthesis of electrode materials has transitioned from a mix and try approach to a systematic design of nanostructures. Recent efforts focus on utilizing the shape-dependent and defect-induced properties of electrode materials to enhance device performance. Solution-based chemical processes offer ways to control morphology at the nano/micro level, thus improving material properties.

RESULTS IN ENGINEERING (2022)

Add to Collection

Article Environmental Sciences

Application of central composite design to reveal resin deterioration during the removal of hexavalent chromium from wastewater

Ke Xiao et al.

Summary: The study investigated the oxidation of polymer resin during Cr(VI) removal by ion exchange, with pH and reaction time found to have the most significant impact. Even with the use of a strong anionic resin and various variables, minimal Cr(VI) reduction efficiency was achieved under certain conditions. Through long-term operation analysis and Fourier transform infrared rays, a proposed oxidation pathway for the resin was identified.

ENVIRONMENTAL TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Textiles

Modeling and optimizing a polycaprolactone/gelatin/polydimethylsiloxane nanofiber scaffold for tissue engineering: using response surface methodology

Mahdieh Dehghan et al.

Summary: In this study, a biocompatible scaffold made from PCL/GEL/PDMS was produced and optimized using response surface methodology. The scaffold showed promising mechanical properties, biodegradability, and biocompatibility for tissue engineering applications.

JOURNAL OF THE TEXTILE INSTITUTE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Binder-free electrodes for advanced potassium-ion batteries: A review

Wencong Liu et al.

Summary: Potassium-ion batteries (PIBs) are gaining attention for their abundance and low cost, but face challenges like low reversible capacity and energy density. Binder-free electrodes show promise in addressing these issues in PIBs with their flexible and wearable designs.

CHINESE CHEMICAL LETTERS (2021)

Add to Collection

Article Materials Science, Ceramics

Nickel-manganese phosphate: An efficient battery-grade electrode for supercapattery devices

Shahid Alam et al.

Summary: The study investigates the charge storage mechanism of NiMn(PO4)(2) binary metal phosphates synthesized through sono-chemical method. The material shows high Q(s) and excellent cyclic stability in supercapattery devices, exhibiting high specific energy and power. Analysis using Dunn's model and power law reveals the contributions to total capacity and the hybrid nature of the device.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Engineering, Environmental

Ultrathin Cu2P2O7 nanoflakes on stainless steel substrate for flexible symmetric all-solid-state supercapacitors

Akanksha Agarwal et al.

Summary: This study successfully fabricates Cu2P2O7 nanoflakes electrode using the SILAR method, demonstrating excellent capacitance performance and cycling stability. The electrode shows superior specific capacitance and energy density, making it a potential candidate for portable energy storage technologies.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Analytical

Synergestic effect of magnetron sputtered silver nano-islands and Co-3(PO4)(2) for high performance supercapattery devices

Muhammad Zahir Iqbal et al.

Summary: This study reveals the enhanced electrochemical performance of cobalt phosphate synthesized by sonochemistry with added magnetron sputtered Ag nano-islands, providing high-performance electrodes for potential supercapattery applications.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Add to Collection

Article Energy & Fuels

Binary composites of nickel-manganese phosphates for supercapattery devices

Meshal Alzaid et al.

Summary: This study demonstrated a cost-effective and green synthesis of Ni-Mn based binary metallic phosphates through a one-step sono-chemical method. By modifying the aspect ratio of Mn in Ni, the composites showed enhanced electrochemical performance for energy storage applications. The supercapattery device with Ni0.75Mn0.25(PO4)2 as positive electrode exhibited exceptional specific energy and power, along with excellent cyclic stability, making it valuable for advanced energy storage devices.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Chemistry, Physical

Optimizing electrochemical performance of sonochemically and hydrothermally synthesized cobalt phosphate for supercapattery devices

Muhammad Zahir Iqbal et al.

Summary: In this study, cobalt phosphate nanostructures were successfully synthesized for supercapattery applications, demonstrating excellent electrochemical performance through an efficient sonochemical method. The fabricated supercapattery device exhibited outstanding specific capacity, energy density, and power density, with a high capacity retention rate even after prolonged use.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Chemistry, Analytical

Optimisation of NiO electrodeposition on 3D graphene electrode for electrochemical energy storage using response surface methodology

Elochukwu Stephen Agudosi et al.

Summary: In this study, NiO was electrodeposited on a 3D graphene electrode to produce a nanocomposite with enhanced electrochemical properties. The optimal electrodeposition conditions were determined through statistical analysis, and the specific capacity of G-NiO was validated through experimental results. The structural and morphological properties of the composite were analyzed using XRD and FESEM studies, confirming its excellent electrochemical performance for energy storage applications.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Amorphous, hydrous nickel phosphate thin film electrode prepared by SILAR method as a highly stable cathode for hybrid asymmetric supercapacitor

Sachin S. Pujari et al.

Summary: Amorphous, hydrous nickel phosphate thin films prepared using SILAR method exhibit superior specific capacitance, excellent capacitive retention, and coulombic efficiency in electrochemical study. A hybrid supercapacitor device utilizing the nickel phosphate as cathode and reduced graphene oxide as anode demonstrates high specific capacitance, energy density, and cyclic stability.

SYNTHETIC METALS (2021)

Add to Collection

Article Energy & Fuels

Strategically Tuned Ultrathin Nickel Phosphate Nanosheet Thin-Film Electrode as Cathode for High-Power Hybrid Supercapacitor Device

Supriya J. Marje et al.

Summary: Manipulating the morphology of nickel phosphate electrode material can improve the capacitive performance of electrochemical energy storage devices. Specifically, strategically tuned ultrathin nanosheets of nickel phosphate show high specific capacity and excellent cyclic stability, making them ideal cathodes for hybrid energy storage devices.

ENERGY & FUELS (2021)

Add to Collection

Article Energy & Fuels

Optimization and analysis of syngas production from methane and CO2 via Taguchi approach, response surface methodology (RSM) and analysis of variance (ANOVA)

Wei-Hsin Chen et al.

Summary: This study aims to produce syngas from methane and CO2 through catalytic partial oxidation, optimizing the process through a two-stage approach of Taguchi method followed by response surface methodology. The results show that the combination of GHSV and O2/C ratio significantly impact the syngas yield, leading to a 5.15% increase in efficiency compared to single-stage optimization.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Hydrothermal synthesis of CuS/CoS nano composite as an efficient electrode for the supercapattery applications

Kummara Venkata Guru Raghavendra et al.

Summary: An efficient CuS/CoS petal-like nanoarchitectures composite was synthesized and demonstrated to have enhanced energy storage behavior for supercapattery applications. Electrochemical measurements confirmed its excellent specific capacity, capacity retention, and cycling stability, making CuS/CoS a promising candidate for supercapattery applications.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Energy & Fuels

Growth of nanostructured cobalt sulfide-based nanocomposite as faradaic binder-free electrode for supercapattery

G. Surender et al.

Summary: Renewable energy requires efficient storage devices for balancing electricity demand and supply. In this study, a cobalt sulfide electrode modified with different metals, such as manganese and copper, demonstrated enhanced performance in terms of specific capacitance and cycling stability. Among the electrodes tested, Mn-CoS-3/NF exhibited the best rate capability and capacitance retention, attributed to its unique nanostructure and low internal resistance.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Ternary MOF-Based Redox Active Sites Enabled 3D-on-2D Nanoarchitectured Battery-Type Electrodes for High-Energy-Density Supercapatteries

Goli Nagaraju et al.

Summary: Designing rational combined metal-organic frameworks (MOFs) with multifunctional nanogeometries is crucial for enhancing the electrochemical properties in energy storage devices. In this study, a new class of dual-layered Ni-Co-Mn-based MOFs with high-performance capabilities was explored, showcasing superior charge storage properties and excellent cycling durability. These MOFs were further used as electrodes for supercapattery devices, achieving high energy and power densities when combined with biomass-derived nitrogen/oxygen doped porous carbon as the negative electrode.

NANO-MICRO LETTERS (2021)

Add to Collection

Review Electrochemistry

Recent Progress in Binder-Free Electrodes Synthesis for Electrochemical Energy Storage Application

Kaixiang Shen et al.

Summary: Fabrication of binder-free electrodes is an effective way to enhance the performance of electrochemical energy storage devices by improving the connection between active materials and current collectors. Various techniques involving chemical, physical, and electrical methods have been utilized to fabricate binder-free electrodes, each with its own advantages and disadvantages. Research in this area has shown that well-designed structure can significantly improve the properties of energy storage performances.

BATTERIES & SUPERCAPS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Binder-Free Electrodes for Advanced Sodium-Ion Batteries

Ting Jin et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Study on Direct Synthesis of Energy Efficient Multifunctional Polyaniline-Graphene Oxide Nanocomposite and Its Application in Aqueous Symmetric Supercapacitor Devices

Hajera Gul et al.

NANOMATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Carbon cloth supported Co1-xNixWO4 nanostructures for high-performance electrochemical capacitor electrodes

Hua Ma et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Facile Synthesis of Microstrip-Like Copper Phosphate Hydroxide Thin Films for Supercapacitor Applications

Sachin S. Pujari et al.

JOURNAL OF ELECTRONIC MATERIALS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

MnO2@Polyaniline-CNT-boron-doped graphene as a freestanding binder-free electrode material for supercapacitor

Rini Jain et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Add to Collection

Article Materials Science, Ceramics

Copper phosphate compounds with visible-to-near-infrared-active photo-fenton-like photocatalytic properties

Gill Sang Han et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Co3O4 Nanosheets as Battery-Type Electrode for High-Energy Li-Ion Capacitors: A Sustained Li-Storage via Conversion Pathway

Palanichamy Sennu et al.

ACS NANO (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Carbon/binder free 3D Si@Cu2O anode for high performance lithium ion battery

Yanbiao Ren et al.

Journal of Materials Research and Technology-JMR&T (2020)

Add to Collection

Article Materials Science, Multidisciplinary

NiS nanoparticles assembled on biological cell walls-derived porous hollow carbon spheres as a novel battery-type electrode for hybrid supercapacitor

Dan Wu et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Fabrication of 3D binder-free graphene NiO electrode for highly stable supercapattery

Elochukwu Stephen Agudosi et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Iron oxide loaded biochar/polyaniline nanocomposite: Synthesis, characterization and electrochemical analysis

Diana Thomas et al.

INORGANIC CHEMISTRY COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Facile sonochemical synthesis of strontium phosphate based materials for potential application in supercapattery devices

Muhammad Zahir Iqbal et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Amorphous V2O5 as high performance cathode for aqueous zinc ion battery

Shougang Wu et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Energy & Fuels

High-performance bimetallic Ni-Mn phosphate hybridized with 3-D graphene foam for novel hybrid supercapacitors

Abdulmajid A. Mirghni et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Ultralow Thermal Conductivity and Large Figure of Merit in Low-Cost and Nontoxic Core-Shell Cu@Cu2O Nanocomposites

Vikash Sharma et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Energy & Fuels

Effect of physical interaction between polyaniline and metal phosphate nanocomposite as positive electrode for supercapattery

Fatin Saiha Omar et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Proceedings Paper Green & Sustainable Science & Technology

Optimization of Cementitious Grouts for Semi-Flexible Pavement Surfaces Using Response Surface Methodology

Muhammad Imran Khan et al.

5TH INTERNATIONAL CONFERENCE ON CIVIL AND ENVIRONMENTAL ENGINEERING FOR SUSTAINABILITY (ICONCEES 2019) (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Conductance and Configuration of Molecular Gold-Water-Gold Junctions under Electric Fields

Limin Xiang et al.

MATTER (2020)

Add to Collection

Review Chemistry, Physical

Recent development of mixed transition metal oxide and graphene/mixed transition metal oxide based hybrid nanostructures for advanced supercapacitors

Wei Hau Low et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Environmental Sciences

Process Optimization Study of Zn2+ Adsorption on Biochar-Alginate Composite Adsorbent by Response Surface Methodology (RSM)

Subrata Biswas et al.

WATER (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Nanoplasmonic Sensor Detects Preferential Binding of IRSp53 to Negative Membrane Curvature

Gustav Emilsson et al.

FRONTIERS IN CHEMISTRY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Nickel-cobalt phosphate/graphene foam as enhanced electrode for hybrid supercapacitor

Abdulmajid Abdallah Mirghni et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Application of central composite design to the partition of perrhenate anion in aqueous two phase system Na2MoO4 + PEG 4000+H2O

Lucy Muruchi et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Review Chemistry, Physical

Conventional and Microwave Hydrothermal Synthesis and Application of Functional Materials: A Review

Guijun Yang et al.

MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Microwave synthesis of sodium nickel-cobalt phosphates as high-performance electrode materials for supercapacitors

Meilin Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance Ni-Co Sulfide Nanosheet-Nanotubes Grown on Ni Foam as a Binder Free Electrode for Supercapacitors

Jaffer Saddique et al.

APPLIED SCIENCES-BASEL (2019)

Add to Collection

Article Engineering, Multidisciplinary

Direct growth of nickel-cobalt oxide nanosheet arrays on carbon nanotubes integrated with binder-free hydrothermal carbons for fabrication of high performance asymmetric supercapacitors

Farzaneh Hekmat et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Crystallography

In-situ measurement of the primary nucleation rate of the metastable polymorph B of L-histidine in antisolvent crystallization

Peetikamol Kongsamai et al.

JOURNAL OF CRYSTAL GROWTH (2019)

Add to Collection

Article Engineering, Environmental

Toward high-performance all-solid-state supercapacitors using facilely fabricated graphite nanosheet-supported CoMoS4 as electrode material

Min Wei et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Electrochemistry

Nickel phosphate/carbon fibre nanocomposite for high-performance pseudocapacitors

Mamdouh E. Abdelsalam et al.

JOURNAL OF APPLIED ELECTROCHEMISTRY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Nickel phosphate nanowires directly grown on Ni foam as binder-free electrode for pseudocapacitors

Zining Wang et al.

MATERIALS LETTERS (2019)

Add to Collection

Article Multidisciplinary Sciences

Optimization of process conditions for tannin content reduction in cassava leaves during solid state fermentation using Saccharomyces cerevisiae

Mohamed Hawashi et al.

HELIYON (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Intrinsic poorly-crystallized Fe5O7(OH)•4H2O: a highly efficient oxygen evolution reaction electrocatalyst under alkaline conditions

Xiaoteng Ding et al.

RSC ADVANCES (2019)

Add to Collection

Article Electrochemistry

Designs of Experiments for Beginners-A Quick Start Guide for Application to Electrode Formulation

Olivier Rynne et al.

BATTERIES-BASEL (2019)

Add to Collection

Article Chemistry, Multidisciplinary

The rapid microwave-assisted hydrothermal synthesis of NASICON-structured Na3V2O2x(PO4)2F3-2x (0 < x ≤ 1) cathode materials for Na-ion batteries

Daria Burova et al.

RSC ADVANCES (2019)

Add to Collection

Article Engineering, Biomedical

Comparison of cytotoxicity of black phosphorus nanosheets in different types of fibroblasts

Su-Jin Song et al.

BIOMATERIALS RESEARCH (2019)

Add to Collection

Article Environmental Sciences

Performance of granular activated carbon/nanoscale zero valent iron for removal of humic substances from aqueous solution based on Experimental Design and Response Surface Modeling

Global NEST Journal (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Self-Generated Nanoporous Silver Framework for High-Performance Iron Oxide Pseudocapacitor Anodes

Jae Young Seok et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Engineering, Environmental

Synthesis of ternary NiCo-MnO2 nanocomposite and its application as a novel high energy supercapattery device

Kabir O. Oyedotun et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Electrochemistry

Enhancing rate capability of amorphous nickel phosphate supercapattery electrode via composition with crystalline silver phosphate

Fatin Saiha Omar et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Electrochemistry

Enhanced Methanol Oxidation on Nanoporous Nickel Phosphate Modified Platinum Electrode in Alkaline Solution

Ahmed H. Touny et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Binder-free cobalt phosphate one-dimensional nanograsses as ultrahigh-performance cathode material for hybrid supercapacitor applications

K. Vijaya Sankar et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Editorial Material Biochemical Research Methods

Optimal experimental design

Byran Smucker et al.

NATURE METHODS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Microwave-hydrothermal synthesis and photocatalytic properties of biomass charcoal/TiO2 nanocomposites

Bo Liu et al.

JOURNAL OF SAUDI CHEMICAL SOCIETY (2018)

Add to Collection

Article Biotechnology & Applied Microbiology

Self assembled snowball-like hybrid nanostructures comprising Viburnum opulus L. extract and metal ions for antimicrobial and catalytic applications

Nilay Ildiz et al.

ENZYME AND MICROBIAL TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

Improving the sodium storage capacity of tunnel structured NaxFexTi2-xO4 (x=1, 0.9 & 0.8) anode materials by tuning sodium deficiency

Deu S. Bhange et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Materials Science, Biomaterials

Modeling and optimization of gelatin-chitosan micro-carriers preparation for soft tissue engineering: Using Response Surface Methodology

Payam Radaei et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Controllable synthesis of Ni-Co-Mn multi-component metal oxides with various morphologies for high-performance flexible supercapacitors

Pingge He et al.

RSC ADVANCES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Phosphate Framework Electrode Materials for Sodium Ion Batteries

Yongjin Fang et al.

ADVANCED SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Bimetallic Co-Mn Perovskite Fluorides as Highly-Stable Electrode Materials for Supercapacitors

Wei Shi et al.

CHEMISTRY-A EUROPEAN JOURNAL (2017)

Add to Collection

Article Electrochemistry

Binary composite of polyaniline/copper cobaltite for high performance asymmetric supercapacitor application

Fatin Saiha Omar et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Article Agricultural Engineering

Steam explosion pretreatment of oil palm empty fruit bunches (EFB) using autocatalytic hydrolysis: A biorefinery approach

Jesus David Coral Medina et al.

BIORESOURCE TECHNOLOGY (2016)

Add to Collection

Article Automation & Control Systems

Prediction and optimization of process parameters of green composites in AWJM process using response surface methodology

Jagadish et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

Add to Collection

Article Chemistry, Physical

Rose rock-shaped nano Cu2O anchored graphene for high-performance supercapacitors via solvothermal route

Wang Zhang et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Acoustics

A FT-IR spectroscopic study of ultrasound effect on aqueous imidazole based ionic liquids having different counter ions

Kai Li et al.

ULTRASONICS SONOCHEMISTRY (2016)

Add to Collection

Article Chemistry, Physical

Simple Synthesis of Molybdenum Disulfide/Reduced Graphene Oxide Composite Hollow Microspheres as Supercapacitor Electrode Material

Wei Xiao et al.

MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

The progress of microwave-assisted hydrothermal method in the synthesis of functional nanomaterials

Ling-Yan Meng et al.

MATERIALS TODAY CHEMISTRY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Integrating large specific surface area and high conductivity in hydrogenated NiCo2O4 double-shell hollow spheres to improve supercapacitors

Xiaoming Li et al.

NPG ASIA MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Rapid microwave assisted hydrothermal synthesis of porous α-Fe2O3 nanostructures as stable and high capacity negative electrode for lithium and sodium ion batteries

B. Nageswara Rao et al.

RSC ADVANCES (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Microwave-Assisted Preparation of Inorganic Nanostructures in Liquid Phase

Ying-Jie Zhu et al.

CHEMICAL REVIEWS (2014)

Add to Collection

Article Materials Science, Ceramics

The influence of thermal treatment on the electrochemical properties of carbon-Ni-Pd composites

Jan M. Skowronski et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Temperature effect on the binder-free nickel copper oxide nanowires with superior supercapacitor performance

Liuyang Zhang et al.

NANOSCALE (2014)

Add to Collection

Article Chemistry, Physical

Possible application of 2D-boron sheets as anode material in lithium ion battery: A DFT and AIMD study

Swastika Banerjee et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

Article Engineering, Environmental

Biosorption optimization of lead(II), cadmium(II) and copper(II) using response surface methodology and applicability in isotherms and thermodynamics modeling

Rajesh Singh et al.

JOURNAL OF HAZARDOUS MATERIALS (2010)

Add to Collection

Article Biotechnology & Applied Microbiology

Purification of CBS 819.72 α-amylase by aqueous two-phase systems: Modelling using Response Surface Methodology

Radhouane Kammoun et al.

BIOCHEMICAL ENGINEERING JOURNAL (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.