☆ 4.7 Article

Field strength effect on elastoplastic behavior of aluminoborosilicate glass: II. Volumetric recovery

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Field strength effect on structure, hardness, and crack resistance in single modifier aluminoborosilicate glasses

Aubrey L. Fry et al.

Summary: This study compares the impact of different network modifiers on the indentation properties of ABS glasses. The results show that both hardness and crack resistance increase with higher field strength, contrary to previous reports. Using nuclear magnetic resonance, the study provides evidence of how charge distributions of different modifier species relate to indentation behavior.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2023)

Add to Collection

Article Materials Science, Ceramics

Indenting glasses with indenters of varying stiffness and sharpness

Johan F. S. Christensen et al.

Summary: In this study, the effects of indenter sharpness and stiffness on the indentation response of oxide glasses were investigated. The study examined the glass deformation mechanism, cracking behavior, and hardness for three different glasses using five different indenters. The results showed that increased indenter sharpness reduced the indentation size effect and lowered crack initiation resistance, while the effect of indenter material was insignificant when the indenter was stiffer than the specimen.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2023)

Add to Collection

Article Materials Science, Ceramics

Improving the precision of Vickers indentation measurements in soda-lime glass with increased dwell time

W. Porter Weeks et al.

Summary: Vickers indentation methods are popular for determining hardness, fracture toughness, and crack initiation resistance in silicate glasses due to their simplicity and efficiency. However, obtaining consistent and repeatable results from these measurements is challenging. In this study, we investigated the effects of applied load, dwell time, and post-indentation observation time on the precision of hardness and fracture toughness values for soda-lime silicate glass measured via Vickers microindentation. The results show that low applied loads and short dwell times result in low precision, while longer dwell times lead to higher precision and load-independent fracture toughness. These findings suggest that Vickers microindentation could be a reliable technique for measuring mechanical properties of silicate glass.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2023)

Add to Collection

Article Materials Science, Ceramics

Field strength effect on elastoplastic behavior of aluminoborosilicate glass: I. Elastic moduli and indentation size effect

Aubrey L. Fry et al.

Summary: This study investigates the effect of modifier field strength (FS) on the elastic-plastic responses of aluminoborosilicate (ABS) glasses. Six different network modifier compositions were created to cover a range of cation FS. The results show that the modifier FS has a significant impact on the mechanical and physical properties of ABS glasses, including elastic moduli, Poisson's ratio, indentation size effect, and bow-in parameter.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2023)

Add to Collection

Article Materials Science, Ceramics

Fracture toughness and hardness of transparent MgO-Al2O3-SiO2 glass-ceramics

Leonardo Sant'Ana Gallo et al.

Summary: In this study, transparent glass-ceramics with high hardness and fracture toughness were obtained through a refined heat-treatment protocol. The mechanical properties, including fracture toughness and hardness, were characterized and compared with the parent glass.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

Lateral-pushing induced surface lift-up during nanoindentation of silicate glass

Linfeng Ding et al.

Summary: In this study, nano-indentation tests were conducted on silicate glasses using a cube-corner indenter, revealing inelastic deformation mechanisms such as shear flow and densification. A newly developed 3D surface analysis method quantified the amplitude of the impression field, showing pile-up and lift-up phenomena near and far from the indent, respectively. The lift-up mechanism was observed for the first time, providing valuable insights into structural evolution during nano-indentation of silicate glass.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Add to Collection

Review Materials Science, Ceramics

Indentation and abrasion in glass products: Lessons learned and yet to be learned

Arun K. Varshneya et al.

Summary: This paper reviews the applied science and technology of indentation and abrasion damage in glass, discussing the mechanical response of glass to impact and the science of deformations and stress generation. It also highlights commercial opportunities for reducing damage and outlines the challenges for a sustainable future of glass products.

INTERNATIONAL JOURNAL OF APPLIED GLASS SCIENCE (2022)

Add to Collection

Article Materials Science, Ceramics

Impact of the cation field strength on physical properties and structures of alkali and alkaline-earth borosilicate glasses

Peng Lv et al.

Summary: This study investigates the impact of the cation field strength on the structure and properties of borosilicate glasses. The results show that alkaline-earth metal cations Sr2+ and Ba2+ along with high-CFS La3+ species maximize the hardness and Young's modulus of the glasses. Different combinations of cations exhibit various composition-structure and CFS-property relationships.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

Structural densification of lithium phosphoaluminoborate glasses

Pengfei Liu et al.

Summary: The addition of P2O5 in lithium aluminoborate glasses results in a more open and soft network. Upon compression, the coordination numbers of boron and aluminum increase, while the number of bridging oxygens around phosphorous decreases. Glasses with higher P2O5 content show a larger decrease in bridging oxygens, leading to a larger increase in coordination numbers of boron and aluminum.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Structure-property relations in crack-resistant alkaline-earth aluminoborosilicate glasses studied by solid state NMR

Millena Logrado et al.

Summary: The study measured the effect of the average ionic potential of network modifier cations on crack initiation resistance and Young's modulus in alkaline-earth aluminoborosilicate glasses, correlating this with structural properties deduced from solid state NMR. The results suggest that in pure alkaline-earth boroaluminosilicate glasses, the trade-off between crack resistance and modulus can be adjusted by the alkaline-earth oxide inventory. Additionally, the presence of MgO in aluminoborosilicate glasses helps overcome the trade-off issue between high crack resistance and high elasticity modulus, offering new opportunities for designing glasses with both rigidity and crack resistance.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

The impact of densification on indentation fracture toughness measurements

Timothy M. Gross et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Ceramics

Composition and pressure effects on the structure, elastic properties and hardness of aluminoborosilicate glass

Jingshi Wu et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Indentation cracking in silicate glasses is directed by shear flow, not by densification

Etienne Barthel et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Physics, Applied

Understanding the response of aluminosilicate and aluminoborate glasses to sharp contact loading using molecular dynamics simulation

Haidong Liu et al.

JOURNAL OF APPLIED PHYSICS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Transparent glass-ceramics for ballistic protection: materials and challenges

Leonardo Sant'Ana Gallo et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection

Article Materials Science, Ceramics

Prediction of the Young's modulus of silicate glasses by topological constraint theory

Kai Yang et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2019)

Add to Collection

Article Chemistry, Physical

Revisiting the Dependence of Poisson's Ratio on Liquid Fragility and Atomic Packing Density in Oxide Glasses

Martin B. Ostergaard et al.

MATERIALS (2019)

Add to Collection

Article Materials Science, Ceramics

New insights into the indentation size effect in silicate glasses

Maryam Kazembeyki et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2019)

Add to Collection

Article Materials Science, Ceramics

Time and humidity dependence of indentation cracking in aluminosilicate glasses

Tobias K. Bechgaard et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)

Add to Collection

Article Materials Science, Ceramics

Crack-resistant glass with high shear band density

T. M. Gross et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)

Add to Collection

Article Chemistry, Physical

Structural Compromise between High Hardness and Crack Resistance in Aluminoborate Glasses

Kristine F. Frederiksen et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2018)

Add to Collection

Article Materials Science, Ceramics

Structural changes in calcium aluminoborosilicate glasses recovered from pressures of 1.5 to 3 GPa: Interactions of two network species with coordination number increases

Saurav Bista et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2017)

Add to Collection

Article Materials Science, Ceramics

Structural origin of high crack resistance in sodium aluminoborate glasses

Kacper Januchta et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Modifier field strength effects on densification behavior and mechanical properties of alkali aluminoborate glasses

Kacper Januchta et al.

PHYSICAL REVIEW MATERIALS (2017)

Add to Collection

Article Physics, Applied

Density of topological constraints as a metric for predicting glass hardness

Qiuju Zheng et al.

APPLIED PHYSICS LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Discovery of Ultra-Crack-Resistant Oxide Glasses with Adaptive Networks

Kacper Januchta et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Accelerating the Design of Functional Glasses through Modeling

John C. Mauro et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Materials Science, Ceramics

Glass transition temperatures and structures of multicomponent borate glasses: Influence of modifier cation field strengths

Tsvetan Vassilev et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)

Add to Collection

Article Materials Science, Ceramics

Raman spectroscopy study of pressure-induced structural changes in sodium borate glass

Mouritz N. Svenson et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Direct observation of indentation deformation and cracking of silicate glasses

Satoshi Yoshida et al.

JOURNAL OF MATERIALS RESEARCH (2015)

Add to Collection

Article Materials Science, Ceramics

Hardness and toughness of sodium borosilicate glasses via Vickers's indentations

Marina Barlet et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2015)

Add to Collection

Article Materials Science, Ceramics

Plasticity, crack initiation and defect resistance in alkali-borosilicate glasses: From normal to anomalous behavior

R. Limbach et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2015)

Add to Collection

Article Materials Science, Ceramics

Indentation deformation mechanism of isostatically compressed mixed alkali aluminosilicate glasses

Kim G. Aakermann et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2015)

Add to Collection

Article Mechanics

Toward glasses with better indentation cracking resistance

Tanguy Rouxel et al.

COMPTES RENDUS MECANIQUE (2014)

Add to Collection

Article Materials Science, Ceramics

Cation Field Strength Effects on Boron Coordination in Binary Borate Glasses

Jingshi Wu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Composition dependence of indentation deformation and indentation cracking in glass

P. Sellappan et al.

ACTA MATERIALIA (2013)

Add to Collection

Article Chemistry, Physical

In situ Brillouin study of sodium alumino silicate glasses under pressure

C. Sonneville et al.

JOURNAL OF CHEMICAL PHYSICS (2013)

Add to Collection

Article Materials Science, Ceramics

Temperature and modifier cation field strength effects on aluminoborosilicate glass network structure

Jingshi Wu et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2013)

Add to Collection

Article Materials Science, Ceramics

Densification and plastic deformation under microindentation in silicate glasses and the relation to hardness and crack resistance

C. Hermansen et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2013)

Add to Collection

Article Multidisciplinary Sciences

Probing incipient plasticity by indenting colloidal glasses

Y. Rahmani et al.

SCIENTIFIC REPORTS (2013)

Add to Collection

Article Materials Science, Ceramics

Glass: The Nanotechnology Connection

John C. Mauro et al.

INTERNATIONAL JOURNAL OF APPLIED GLASS SCIENCE (2013)

Add to Collection

Article Materials Science, Ceramics

Deformation and cracking behavior of glasses indented with diamond tips of various sharpness

T. M. Gross

JOURNAL OF NON-CRYSTALLINE SOLIDS (2012)

Add to Collection

Article Materials Science, Ceramics

Composition-structure-property relationships in boroaluminosilicate glasses

Qiuju Zheng et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2012)

Add to Collection

Article Physics, Multidisciplinary

Gwyddion: an open-source software for SPM data analysis

David Necas et al.

CENTRAL EUROPEAN JOURNAL OF PHYSICS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Towards Ultrastrong Glasses

Lothar Wondraczek et al.

ADVANCED MATERIALS (2011)

Add to Collection

Review Chemistry, Physical

Poisson's ratio and modern materials

G. N. Greaves et al.

NATURE MATERIALS (2011)

Add to Collection

Article Physics, Applied

Indentation deformation mechanism in glass: Densification versus shear flow

T. Rouxel et al.

JOURNAL OF APPLIED PHYSICS (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of indenter geometry on indentation-induced densification of soda-lime glass

Satoshi Yoshida et al.

JOURNAL OF MATERIALS RESEARCH (2010)

Add to Collection

Article Materials Science, Ceramics

Effect of densification on crack initiation under Vickers indentation test

Yoshinari Kato et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2010)

Add to Collection

Article Geochemistry & Geophysics

Simultaneous aluminum, silicon, and sodium coordination changes in 6 GPa sodium aluminosilicate glasses

Kimberly E. Kelsey et al.

AMERICAN MINERALOGIST (2009)

Add to Collection

Article Chemistry, Physical

Structural response of a highly viscous aluminoborosilicate melt to isotropic and anisotropic compressions

Jingshi Wu et al.

JOURNAL OF CHEMICAL PHYSICS (2009)

Add to Collection

Article Materials Science, Ceramics

Effects of cation field strength on the structure of aluminoborosilicate glasses: High-resolution 11B, 27Al and 23Na MAS NMR

Jingshi Wu et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2009)

Add to Collection

Article Materials Science, Ceramics

Characteristic temperatures of enthalpy relaxation in glass

Yuan-Zheng Yue

JOURNAL OF NON-CRYSTALLINE SOLIDS (2008)

Add to Collection

Article Physics, Multidisciplinary

Poisson's ratio and the densification of glass under high pressure

T. Rouxel et al.

PHYSICAL REVIEW LETTERS (2008)

Add to Collection

Article Materials Science, Ceramics

Relaxation behaviors of Vickers indentations in soda-lime glass

Hiroshi Sawasato et al.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Indentation of elastic solids with a rigid Vickers pyramidal indenter

Yong Yee Lim et al.

MECHANICS OF MATERIALS (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Quantitative evaluation of indentation-induced densification in glass

S Yoshida et al.

JOURNAL OF MATERIALS RESEARCH (2005)

Add to Collection

Article Geochemistry & Geophysics

Aluminum coordination and the densification of high-pressure aluminosilicate glasses

JR Allwardt et al.

AMERICAN MINERALOGIST (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.