☆ 4.7 Article

Fast preparation of porous anatase material via CuO-mediated glass crystallization and acid-leaching

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2023)

Related references

Note: Only part of the references are listed.

Article Environmental Sciences

Photocatalytic degradation of sulfamethoxazole using TiO2-based materials - Perspectives for the development of a sustainable water treatment technology

Joanna Musial et al.

Summary: Heterogeneous photocatalysis using titanium dioxide-based materials is a promising solution to water pollution. However, the research often remains confined to the laboratory due to the limitations of the developed materials and photodegradation conditions. This paper collects and compares studies on the photocatalytic degradation of sulfamethoxazole to find the best approaches for industrial application. Factors such as different types of TiO2-based photocatalysts, irradiation sources, and water matrices are considered, along with the stability and reusability of the photocatalyst and the identification of intermediate products and toxicity assays.

SCIENCE OF THE TOTAL ENVIRONMENT (2023)

Add to Collection

Article Materials Science, Ceramics

A glass-ceramic approach to prepare porous TiO2 with self-supported nano-flakes: The phase evolution and the thermal stability of the product

Jiejie Zhao et al.

Summary: A porous TiO2 material with excellent thermal stability and large surface area was prepared by acid-etching a phosphate glass frit, showing potential for scale-up production.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

Scalable synthesis of millimeter-sized porous MgTi4(PO4)6 photocatalyst via glass-ceramic combined acid-leaching route

Jiejie Zhao et al.

Summary: Porous glass-ceramic materials with excellent photocatalytic performance were successfully obtained by conventional melting and water quenching method. The study suggests that the traditional glass route could be a large-scale and low-cost way for the production of photocatalysts.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Formulation of water-based white colour paint from waste titanium dioxide

Mohd Najib Bin Razali et al.

Summary: This study examines the potential of using secondary TiO2 pigments as an alternative to virgin pigments to formulate white paint from industrial waste. The results show that paint formulated with 20% TiO2 provides the best results in the adhesion test, with performance comparable to the paint industry.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Review Thermodynamics

A critical review of heat transfer enhancement methods in the presence of porous media, nanofluids, and microorganisms

M. Habibishandiz et al.

Summary: This article discusses the study on reducing energy usage and proposes three techniques for enhancing heat transfer: passive, active, and compound methods. A literature review is conducted on the passive techniques of porous media, nanofluids, and microorganisms, and the contributing role of microorganisms on heat transfer enhancement is emphasized. The article also provides innovative thinking and raises key questions for future investigations.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2022)

Add to Collection

Article Chemistry, Physical

FTIR Spectral Characterization, Mechanical and Electrical Properties of P2O5-Li2O-CuO Glass-Ceramics

Mohammed A. Taha et al.

Summary: This study investigated the crystallization process and properties of (50 P2O5-50 Li2O) glasses with different CuO concentrations using XRD, SEM, and FTIR. The results showed that increasing CuO content led to the formation of LiPO(3) and Li(2)CuP(2)O(7) phases, resulting in increased density and improved mechanical properties. The electrical conductivity and activation energy were also found to be dependent on CuO content.

SILICON (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A TiO2 nanotubes film with excellent antireflective and near-perfect self-cleaning performances

Kaibin Li et al.

Summary: A high-quality TiO2 nanotubes film with excellent antireflective and near-perfect self-cleaning performances has been successfully prepared using a new method. The film shows nearly perfect optical properties and self-cleaning function, indicating promising applications.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Ag quantum dots modified hierarchically porous and defective TiO2 nanoparticles for improved photocatalytic CO2 reduction

Guohui Li et al.

Summary: A novel hierarchically porous and defective TiO2 modified by Ag quantum dots has been designed for photocatalytic reduction of CO2, showing excellent and stable activity with suppression of H-2 evolution. The super photocatalytic activity is attributed to the design of hierarchically porous structure, intrinsic defects in TiO2, localized surface plasmon resonance of Ag, and synergetic effect between Ag quantum dots and defective TiO2.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Scalable synthesis of strutted nitrogen doped hierarchical porous carbon nanosheets for supercapacitors with both high gravimetric and volumetric performances

Chong Chen et al.

Summary: In this study, porous carbon nanosheets with high specific surface area and rich surface heteroatoms were successfully synthesized, leading to high gravimetric/volumetric capacitance and energy density of the supercapacitor. This work provides a new strategy for the mass production of high-performance carbon nanosheets for energy storage.

CARBON (2021)

Add to Collection

Review Materials Science, Ceramics

Review on synthesis of porous TiO2-based catalysts for energy conversion systems

Hui Mao et al.

Summary: Porous TiO2-based catalysts have gained significant attention for energy conversion systems due to their unique structure, large surface area, and good chemical stability. This report reviews research on these catalysts over the past four years, discussing their advantages, synthetic approaches, applications in different energy conversion systems, as well as the challenges and future perspectives in synthesizing porous TiO2-based catalysts.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Thermal Properties of Glass and Melts of the CaO-B2O3-Al2O3-CuO System

E. N. Selivanov et al.

Summary: The temperatures of devitrification, melting, and glass transition of samples from the CaO-B2O3-Al2O3-CuO system were determined using the methods of differential thermal analysis. Viscosity measurements were conducted on alumina-calcium borate melts with up to 8.1% CuO, showing that the addition of copper oxide decreased viscosity and activation energy of viscous flow.

GLASS PHYSICS AND CHEMISTRY (2021)

Add to Collection

Article Materials Science, Textiles

Sonochemical fabrication of nanocryatalline titanium dioxide (TiO2) in cotton fiber for durable ultraviolet resistance

Mohammad Neaz Morshed et al.

JOURNAL OF NATURAL FIBERS (2020)

Add to Collection

Article Materials Science, Ceramics

Porous glass-ceramics derived from MgO-CuO-TiO2-P2O5 glasses with different additions of Fe2O3

Feng Chen et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Review Engineering, Environmental

A review on the synthesis of the various types of anatase TiO2 facets and their applications for photocatalysis

Reza Katal et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Multidisciplinary Sciences

Recent advances in the synthesis of hierarchically mesoporous TiO2 materials for energy and environmental applications

Wei Zhang et al.

NATIONAL SCIENCE REVIEW (2020)

Add to Collection

Article Engineering, Environmental

A novel synthesis of porous TiO2 nanotubes and sequential application to dye contaminant removal and Cr(VI) visible light catalytic reduction

Meng Liu et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Ga-Doped and Pt-Loaded Porous TiO2-SiO2 for Photocatalytic Nonoxidative Coupling of Methane

Shiqun Wu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Review Chemistry, Physical

Titanium Dioxide: From Engineering to Applications

Xiaolan Kang et al.

CATALYSTS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis and Enhanced Photocatalytic Activity of Porous SrTiO3/TiO2 Composites

Yongteng Qian et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2019)

Add to Collection

Article Engineering, Environmental

Synthesis of porous TiO2/ZrO2 photocatalyst derived from zirconium metal organic framework for degradation of organic pollutants under visible light irradiation

Jafar Abdi et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Metal-Organic Frameworks for Separation

Xiang Zhao et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Materials Science, Ceramics

Hierarchical nano ZnO-micro TiO2 composites: High UV protection yield lowering photodegradation in sunscreens

Julian Jimenez Reinosa et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Ceramics

Influence of TiO2 content on the structure and crystallization of CuO-TiO2-P2O5 glasses and the derived porous glass-ceramics

Liyuan Zhang et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Porous TiO2 Nanotubes with Spatially Separated Platinum and CoOx Cocatalysts Produced by Atomic Layer Deposition for Photocatalytic Hydrogen Production

Jiankang Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Add to Collection

Review Environmental Sciences

TiO2-based photocatalytic disinfection of microbes in aqueous media: A review

P. Venkata Laxma Reddy et al.

ENVIRONMENTAL RESEARCH (2017)

Add to Collection

Review Chemistry, Physical

A review of TiO2 nanostructured catalysts for sustainable H2 generation

Mingzheng Ge et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Lightweight and efficient microwave absorbing materials based on walnut shell-derived nano-porous carbon

Xu Qiu et al.

NANOSCALE (2017)

Add to Collection

Article Engineering, Biomedical

High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints

Sajad Arabnejad et al.

ACTA BIOMATERIALIA (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Applications of hierarchically structured porous materials from energy storage and conversion, catalysis, photocatalysis, adsorption, separation, and sensing to biomedicine

Ming-Hui Sun et al.

CHEMICAL SOCIETY REVIEWS (2016)

Add to Collection

Article Chemistry, Physical

Facile phase control for hydrothermal synthesis of anatase-rutile TiO2 with enhanced photocatalytic activity

Hong Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Review Multidisciplinary Sciences

Function-led design of new porous materials

Anna G. Slater et al.

SCIENCE (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Porous Graphene Materials for Advanced Electrochemical Energy Storage and Conversion Devices

Sheng Han et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Highly photocatalytic glass ceramics containing MgTi4(PO4)6 crystals

Jie Fu

MATERIALS LETTERS (2014)

Add to Collection

Article Chemistry, Physical

Porous sponge-like anatase TiO2 via polymer templates: synthesis, characterization, and performance as a light-scattering material

Lukasz Szymanski et al.

COLLOID AND POLYMER SCIENCE (2013)

Add to Collection

Article Nanoscience & Nanotechnology

The sol-gel template synthesis of porous TiO2 for a high performance humidity sensor

Zhuyi Wang et al.

NANOTECHNOLOGY (2011)

Add to Collection

Article Chemistry, Physical

Template-free synthesis and photocatalytic activity of hierarchical porous titania with controlled texture and crystalline structure

Kaisheng Xia et al.

APPLIED CATALYSIS A-GENERAL (2010)

Add to Collection

Article Chemistry, Physical

Electrochemical Impedance Spectroscopy of Porous TiO2 for Photocatalytic Applications

Nir Baram et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)

Add to Collection

Article Materials Science, Ceramics

Structures and Photocatalytic Properties of Crystalline Titanium Oxide-Dispersed Nanoporous Glass-Ceramics

Fumiko Machida et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)

Add to Collection

Article Materials Science, Ceramics

Novel porous TiO2 glass-ceramics with highly photocatalytic ability

Tetsuo Yazawa et al.

CERAMICS INTERNATIONAL (2009)

Add to Collection

Article Engineering, Environmental

Leaching of copper oxide with different acid solutions

N. Habbache et al.

CHEMICAL ENGINEERING JOURNAL (2009)

Add to Collection

Article Materials Science, Ceramics

Effects of CuO Doping on the Microstructural and Dielectric Properties of Ba0.6Sr0.4TiO3 Ceramics

Ying-Chieh Lee et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)

Add to Collection

Article Nanoscience & Nanotechnology

Micro structural parameters from X-ray diffraction peak broadening

T Ungár

SCRIPTA MATERIALIA (2004)

Add to Collection

Article Geochemistry & Geophysics

Partitioning of trace elements between crystals and melts

J Blundy et al.

EARTH AND PLANETARY SCIENCE LETTERS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.