☆ 4.8 Article

Investigating battery-supercapacitor material hybrid configurations in energy storage device cycling at 0.1 to 10C rate

JOURNAL OF POWER SOURCES (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Exploring Different Binders for a LiFePO4 Battery, Battery Testing, Modeling and Simulations

Joseph Paul Baboo et al.

Summary: This paper focuses on the LiFePO4 (LFP) battery and investigates the use of new binders to optimize cathode manufacturing. Experimental and simulation results provide insights into the diffusion coefficients of LFP electrodes and the prediction of battery lifetime.

ENERGIES (2022)

Add to Collection

Article Chemistry, Applied

Evaluation on a 400 Wh kg-1 lithium-sulfur pouch cell

Ge Ye et al.

Summary: This paper systematically evaluates high-energy-density Li-S pouch cells, revealing the working and failure mechanism of Li-S batteries under practical conditions. The study found considerable lithium polysulfides in the electrolyte with high capacity retention in sulfur redox reactions, and identified severe morphology change in lithium metal anode with substantial active lithium supporting subsequent cycles.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A Novel Multiport DC-DC Converter for Enhancing the Design and Performance of Battery-Supercapacitor Hybrid Energy Storage Systems for Unmanned Aerial Vehicles

Ahmed M. Fares et al.

Summary: This paper proposes an integrated multiport non-isolated DC-DC converter system for integrating battery-supercapacitor hybrid energy storage with photovoltaics. The system allows a size reduction of the supercapacitor and inductor by maximizing the utilization of the rated energy capacity and using a phase-shifted carrier modulation technique.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Thermodynamics

Development and evaluation of a composite supercapacitor-based 12 V transient start-stop power system for vehicles: Modelling, design and fabrication scaling up

Chunhong Lei et al.

Summary: The study follows a bottom-up approach, developing a 12V transient start-stop power system for automotive applications through the design, modeling, and fabrication stages of large supercapacitor pouch cells. By optimizing the composition of the composite supercapacitor at a material level, the design successfully meets the specified energy-to-maximum power ratio requirement. The results of the study demonstrate the successful implementation of a high-quality 12V power system designed with strict weight control.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2021)

Add to Collection

Article Electrochemistry

Electrochemical double-layer capacitors with lithium-ion electrolyte and electrode coatings with PEDOT:PSS binder

Foivos Markoulidis et al.

Summary: An experimental study was conducted on symmetric EDLCs with lithium-ion electrolyte, exploring different binder concentrations and electrode coating methods. It was found that electrodes with PEDOT:PSS binder exhibited pseudocapacitance effects in the lithium-ion electrolyte, with the EDLCs with doctor blade-coated electrodes and 10 wt% PEDOT:PSS binder showing the highest energy density in discharge. Additionally, EDLCs with sprayed electrodes achieved higher power density than doctor blade coated electrodes.

JOURNAL OF APPLIED ELECTROCHEMISTRY (2021)

Add to Collection

Review Computer Science, Information Systems

Review of Electric Vehicle Converter Configurations, Control Schemes and Optimizations: Challenges and Suggestions

Molla S. Hossain Lipu et al.

Summary: Electric vehicles are gaining attention worldwide for their performance improvements and zero emissions. Effective power transfer from energy storage systems to electric motors requires proper interfacing, modulation techniques, and optimization algorithms. Challenges in electric vehicle converters and controllers include high current stress and computational complexity, emphasizing the importance of efficient control strategies for sustainable applications.

ELECTRONICS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Designing a Graphene Coating-Based Supercapacitor with Lithium Ion Electrolyte: An Experimental and Computational Study via Multiscale Modeling

Joseph Paul Baboo et al.

Summary: The study investigates the use of graphene electrodes in electrochemical double layer capacitors with lithium ion electrolyte, focusing on the effect of electrode pore size distribution on solvated and desolvated electrolyte ions. Experimental and computational results show that the xGNP-750 coating electrodes exhibit a higher specific capacitance in a specific electrolyte compared to high SSA a-MWGO coating electrodes.

NANOMATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Understanding the limitations of lithium ion batteries at high rates

Michael. J. Lain et al.

Summary: Commercial lithium ion cells were disassembled for electrode evaluation, showing three limiting processes during high rate pulse power tests, and specific charge and discharge parameters were identified for different power levels.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Review Multidisciplinary Sciences

Production of high-energy Li-ion batteries comprising silicon-containing anodes and insertion-type cathodes

Gebrekidan Gebresilassie Eshetu et al.

Summary: The authors discuss the use of silicon-containing anodes and insertion-type cathodes in battery systems, which have attracted significant interest for electric vehicles and renewable energy sources. However, these high-energy systems are limited by their complex chemistry and intrinsic drawbacks, requiring corresponding mitigating strategies.

NATURE COMMUNICATIONS (2021)

Add to Collection

Review Chemistry, Applied

A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards

Yuqing Chen et al.

Summary: Efficient and reliable energy storage systems are essential for modern society, with lithium-ion batteries (LIBs) being widely used but facing safety challenges. This review examines LIB safety issues, strategies for improvement, and current testing standards, providing insights into potential future developments for safer LIBs.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Energy & Fuels

2021 roadmap on lithium sulfur batteries

James B. Robinson et al.

Summary: Lithium sulfur (Li-S) chemistry is a commercially mature technology with significant improvements in energy density and reduced costs, but challenges remain in improving rate performance and longevity. The UK's Faraday Institution has launched the LiSTAR program to address these issues and support the broader Li-S research community, providing guidance for academia, industry, government, and funding agencies.

JOURNAL OF PHYSICS-ENERGY (2021)

Add to Collection

Article Multidisciplinary Sciences

Designing a hybrid electrode toward high energy density with a staged Li+ and PF6- deintercalation/intercalation mechanism

Junnan Hao et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

Add to Collection

Article Nanoscience & Nanotechnology

A High-Performance Structural Supercapacitor

Richard Reece et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Energy & Fuels

Thermal runaway behavior and features of LiFePO4/graphite aged batteries under overcharge

Cong-jie Wang et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Add to Collection

Article Chemistry, Physical

Supercapacitors with lithium-ion electrolyte: An experimental study and design of the activated carbon electrodes via modelling and simulations

Foivos Markoulidis et al.

CARBON (2020)

Add to Collection

Article Chemistry, Physical

Segmented bi-material cathodes to boost the lithium-ion battery-capacitors

Tao Du et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

Dendrite-free lithium deposition by coating a lithiophilic heterogeneous metal layer on lithium metal anode

Feihu Guo et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Electrochemistry

Effect of Temperature on The Kinetics of Electrochemical Insertion of Li-Ions into a Graphite Electrode Studied by Kinetic Monte Carlo

E. M. Gavilan-Arriazu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Thermodynamics

Multi-objective component sizing for a battery-supercapacitor power supply considering the use of a power converter

Li Sun et al.

ENERGY (2018)

Add to Collection

Article Thermodynamics

The battery-supercapacitor hybrid energy storage system in electric vehicle applications: A case study

Ziyou Song et al.

ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Improving the specific energy of Li-Ion capacitor laminate cell using hybrid activated Carbon/LiNi0.5Co0.2Mn0.3O2 as positive electrodes

M. Hagen et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Hybrid lithium-ion capacitor with LiFePO4/AC composite cathode - Long term cycle life study, rate effect and charge sharing analysis

A. Shellikeri et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Energy management and control system of DC-DC converter with super-capacitor and battery for recovering of train kinetic energy

M. Fallah et al.

JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Suppressing self-discharge of supercapacitors via electrorheological effect of liquid crystals

Mengyang Xia et al.

NANO ENERGY (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Controlling Nucleation in Lithium Metal Anodes

Xuze Guan et al.

SMALL (2018)

Add to Collection

Article Multidisciplinary Sciences

In operando plasmonic monitoring of electrochemical evolution of lithium metal

Yan Jin et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Magnesium-Sodium Hybrid Battery With High Voltage, Capacity and Cyclability

Fuigang Zhang et al.

FRONTIERS IN CHEMISTRY (2018)

Add to Collection

Article Chemistry, Physical

Detrimental Effects of Chemical Crossover from the Lithium Anode to Cathode in Rechargeable Lithium Metal Batteries

Hongkyung Lee et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Electrochemistry

Structural Effect of Conductive Carbons on the Adhesion and Electrochemical Behavior of LiNi0.4Mn0.4Co0.2 O2 Cathode for Lithium Ion Batteries

Mohammed Latifatu et al.

JOURNAL OF ELECTROCHEMICAL SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Electrochemistry

A Physically-Based Equivalent Circuit Model for the Impedance of a LiFePO4/Graphite 26650 Cylindrical Cell

Roberto Scipioni et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Battery-Supercapacitor Hybrid Devices: Recent Progress and Future Prospects

Wenhua Zuo et al.

ADVANCED SCIENCE (2017)

Add to Collection

Article Multidisciplinary Sciences

Advanced Sulfur-Silicon Full Cell Architecture for Lithium Ion Batteries

Rachel Ye et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Electrochemistry

Investigations of Activated Carbon Fabric-based Supercapacitors with Different Interlayers via Experiments and Modelling of Electrochemical Processes of Different Timescales

Foivos Markoulidis et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Article Chemistry, Physical

Graphene-based materials via benzidine-assisted exfoliation and reduction of graphite oxide and their electrochemical properties

E. C. Vermisoglou et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Engineering, Environmental

Recycling of typical supercapacitor materials

Eleni C. Vermisoglou et al.

WASTE MANAGEMENT & RESEARCH (2016)

Add to Collection

Article Energy & Fuels

The Composite Supercapacitor

Richard Fields et al.

ENERGY TECHNOLOGY (2016)

Add to Collection

Article Chemistry, Physical

Power split strategies for hybrid energy storage systems for vehicular applications

Alberto Santucci et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Multidisciplinary Sciences

Hybrid supercapacitor-battery materials for fast electrochemical charge storage

A. Vlad et al.

SCIENTIFIC REPORTS (2014)

Add to Collection

Article Multidisciplinary Sciences

Electrochemical performance of MCMB/(AC+LiFePO4) lithium-ion capacitors

Ping LiNa et al.

CHINESE SCIENCE BULLETIN (2013)

Add to Collection

Article Chemistry, Physical

(LiNi0.5Co0.2Mn0.3O2 + AC)/graphite hybrid energy storage device with high specific energy and high rate capability

Xianzhong Sun et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Materials Science, Coatings & Films

Activated carbon-carbon nanotube nanocomposite coatings for supercapacitor applications

Chunhong Lei et al.

SURFACE & COATINGS TECHNOLOGY (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Electrophoresis and orientation of multiple wall carbon nanotubes in polymer solution

A. K. Murugesh et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2010)

Add to Collection

Article Chemistry, Physical

Capacity fade study of lithium-ion batteries cycled at high discharge rates

G Ning et al.

JOURNAL OF POWER SOURCES (2003)

Add to Collection

Article Chemistry, Physical

Factors that affect cycle-life and possible degradation mechanisms of a Li-ion cell based on LiCoO2

SS Choi et al.

JOURNAL OF POWER SOURCES (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.