☆ 4.8 Article

An advanced organic cathode for non-aqueous and aqueous calcium-based dual ion batteries

JOURNAL OF POWER SOURCES (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Emerging organic electrodes for Na-ion and K-ion batteries

Jiahui Hu et al.

Summary: The use of redox-active organic compounds as electrode materials for Li/Na/K-ion batteries provides a new avenue for the development of organic electrodes. The research on organic electrodes has seen significant progress, and it is important to summarize the historic development and understand the mechanisms behind their electron and ion storage.

ENERGY STORAGE MATERIALS (2023)

Add to Collection

Article Engineering, Environmental

Intercalation of bilayered V2O5 by electronically coupled PEDOT for greatly improved kinetic performance of magnesium ion battery cathodes

Yun Sang Joe et al.

Summary: Magnesium ion batteries (MIBs) are attractive as next-generation energy storage systems due to their high safety, capacity, low reduction potential, material abundance, and economic efficiency. However, developing reversible and fast MIB cathode materials is challenging due to slow ion diffusion and weak interactions. In this study, a V2O5/PEDOT (VOP) complex with charge transfer interaction and an expanded interlayer spacing of 19.02A was designed to enable reversible and fast Mg2+ ion storage. Water activation was found to enhance the kinetics. The VOP electrodes exhibited high specific and high-rate capacity, as well as long-term cyclic stability.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Physical

Bilayered Ca0.28V2O5?H2O: High-Capacity Cathode Material for Rechargeable Ca-Ion Batteries and Its Charge Storage Mechanism

Boosik Jeon et al.

Summary: This study reports a bilayered Ca0.28V2O5·H2O as a high-capacity CIB cathode material with excellent capacity and cyclability. Its unique intercalation mechanism and highly reversible charge-discharge cycle provide valuable insights for developing high-performance CIB cathodes.

CHEMISTRY OF MATERIALS (2022)

Add to Collection

Review Chemistry, Physical

Rechargeable Batteries of the Future-The State of the Art from a BATTERY 2030+Perspective

Maximilian Fichtner et al.

Summary: This review discusses the challenges in battery technology development and the research directions of the five research pillars of the European Large-Scale Research Initiative BATTERY 2030+. Topics include battery interface genome, self-healing battery materials, real-time sensing for battery health monitoring, battery manufacturability, and recyclability in battery design.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Lignin as Polymer Electrolyte Precursor for Stable and Sustainable Potassium Batteries

Sabrina Trano et al.

Summary: In this study, a lignin-based electrolyte was successfully designed, which exhibited a wide stability window and high ionic conductivity, leading to significant electrochemical performance improvement in potassium batteries. This represents a milestone in utilizing renewable resources for potassium battery research.

CHEMSUSCHEM (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Calcium Based All-Organic Dual-Ion Batteries with Stable Low Temperature Operability

Biao Jiang et al.

Summary: In this work, an all-organic dual-ion battery with calcium perchlorate as the electrolyte was fabricated, and it exhibited excellent electrochemical performances at low temperatures. The energy storage mechanism of the battery relies more on the electrode materials rather than the electrolyte. The results provide important guidance for the design of secondary batteries operable at low temperatures.

SMALL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Cardanol-Derived Epoxy Resins as Biobased Gel Polymer Electrolytes for Potassium-Ion Conduction

Eleonora Manarin et al.

Summary: This study developed biobased gel polymer electrolyte (GPE) membranes through esterification reaction, showing excellent electrochemical stability and suitable ionic conductivity for potassium-ion battery fabrication.

ACS APPLIED POLYMER MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Calcium-tin alloys as anodes for rechargeable non-aqueous calcium-ion batteries at room temperature

Zhirong Zhao-Karger et al.

Summary: The key challenge for rechargeable Ca batteries is the passivation of the calcium metal anode in electrolyte solutions. The authors demonstrate the feasibility and electrochemical properties of calcium-tin (Ca-Sn) alloy anodes for rechargeable Ca batteries. Rechargeable calcium batteries have attractive features for sustainable energy storage solutions, but encounter issues with cathode materials and electrolyte solutions. The use of Ca-Sn alloy anodes opens a promising avenue towards high-performance Ca-ion batteries.

NATURE COMMUNICATIONS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Advances and Perspectives on Calcium-Ion Storage: Key Materials and Devices

Bifa Ji et al.

Summary: The development of cost-effective energy storage devices has driven the exploration of beyond-lithium energy storage systems, with calcium-ion batteries (CIBs) emerging as a promising option due to abundant resources and high energy density potential. However, their performance needs improvement. Multi-ion strategies show promise in achieving high-performance room temperature CIBs.

ADVANCED MATERIALS (2021)

Add to Collection

Article Spectroscopy

Poly(N-methylaniline) vs. polyaniline: An extended pH range of polaron stability as revealed by Raman spectroelectrochemistry

Regina Mazeikiene et al.

Summary: A comparative study was conducted on polyaniline and poly(N-methylaniline) using Raman spectroelectrochemical technique, revealing that in neutral or slightly alkaline solutions, poly(N-methylaniline) exhibits higher conductivity compared to polyaniline due to differences in their chemical structures.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2021)

Add to Collection

Article Chemistry, Physical

Ultra-stable Ti2O(PO4)2(H2O) as a viable new Ca2+ storage electrode material for calcium-ion batteries

S. J. Richard Prabakar et al.

Summary: The study introduces Ti2O(PO4)2(H2O) as a new Ca2+ insertion electrode material for CIBs, showcasing high cycle-life and stability, with the potential to advance the development of calcium ion batteries.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

A universal strategy towards high-energy aqueous multivalent-ion batteries

Xiao Tang et al.

Summary: Rechargeable multivalent-ion batteries, such as those using calcium, magnesium or aluminum, are promising candidates for large-scale electrochemical energy storage. Researchers have developed various aqueous multivalent-ion cells utilizing concentrated aqueous gel electrolytes, sulfur-containing anodes, and high-voltage metal oxide cathodes, showing satisfactory performance and potential for future energy storage technologies.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Multidisciplinary Sciences

Proton-assisted calcium-ion storage in aromatic organic molecular crystal with coplanar stacked structure

Cuiping Han et al.

Summary: In this study, 5,7,12,14-pentacenetetrone (PT) is proposed as an organic crystal electrode active material for aqueous Ca-ion storage, showing high specific capacity, high-rate capability, and favorable low-temperature performances. Mechanistic study reveals proton-assisted uptake/removal of Ca2+ in PT during cycling, providing insights into the Ca-ion storage behavior of PT as an electrode material.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Influence of Colloidal Au on the Growth of ZnO Nanostructures

Frank Guell et al.

Summary: The influence of colloidal Au nanoparticle suspension on the growth of ZnO nanostructures was studied, showing that by adjusting both colloidal and growth parameters, various ZnO nanostructures can be grown on different substrates. High-resolution transmission electron microscopy revealed the high-crystal quality of the obtained ZnO nanostructures, while photoluminescence results demonstrated different emission bands related to defect recombination processes.

NANOMATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A High-Voltage Zn-Organic Battery Using a Nonflammable Organic Electrolyte

Xuan Qiu et al.

Summary: A new organic electrolyte containing zinc trifluoromethanesulfonate salt and a mixed solvent has been proposed for zinc batteries, which shows high ionic conductivity, wide potential window, and dendrite-free zinc plating/stripping. A 2 V zinc//polytriphenylamine composite battery fabricated with the optimized electrolyte exhibits high performance and long cycle life even with high mass-loading of PTPAn in the cathode and high zinc-utilization.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Desolvation-Free Sodium Dual-Ion Chemistry for High Power Density and Extremely Low Temperature

Jiawei Chen et al.

Summary: The novel desolvation-free sodium dual-ion battery (SDIB) with artificial graphite anode and polytriphenylamine cathode shows exceptional performance in fast charging, low-temperature operation, high power density, and wide temperature range. This advanced battery system opens up new possibilities for designing energy storage devices in the future.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Multidisciplinary Sciences

A new high-voltage calcium intercalation host for ultra-stable and high-power calcium rechargeable batteries

Zheng-Long Xu et al.

Summary: Rechargeable calcium batteries have faced challenges in developing suitable cathodes to accommodate large and divalent Ca2+ ions. A new intercalation host derived from Na0.5VPO4.8F0.7 has shown exceptional cycle life and power capability in calcium batteries, offering potential solutions to the current bottleneck in calcium battery development.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

High Performance Aqueous and Nonaqueous Ca-Ion Cathodes Based on Fused-Ring Aromatic Carbonyl Compounds

Munseok S. Chae et al.

Summary: This study demonstrates reversible storage of Ca2+ ions in crystalline 3,4,9,10-perylene tetracarboxylic dianhydride, with redox centers interacting with divalent ions. The use of saturated Ca(ClO4)2 in propylene carbonate solutions shows promising calcium storage performances, avoiding material dissolution problems and promoting highly active interfacial reactions with organic cathode materials for better electrochemical performance.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Crystal-Water-Free Potassium Vanadium Bronze (K0.5V2O5) as a Cathode Material for Ca-Ion Batteries

Meladia E. Purbarani et al.

Summary: The research presents K0.5V2O5 as a cathode material for CIBs, showing a high reversible discharge capacity at room temperature. The findings demonstrate the potential for developing high-capacity crystal-water-free cathode materials for CIBs.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Electrochemistry

A branched dihydrophenazine-based polymer as a cathode material to achieve dual-ion batteries with high energy and power density

Shuaifei Xu et al.

Summary: In this study, a branched dihydrophenazine-based polymer was designed and synthesized for use as a cathode material in dual-ion batteries. The polymer exhibited a higher theoretical capacity and lower energy levels compared to a linear dihydrophenazine-based polymer, resulting in higher actual capacity and energy density. The branched structure of the polymer also contributed to a larger specific surface area, enabling faster ionic transport and higher power density.

ESCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Silver vanadium bronze, β-Ag0.33V2O5: crystal-water-free high-capacity cathode material for rechargeable Ca-ion batteries

Jooeun Hyoung et al.

Summary: This study presents beta-Ag0.33V2O5 as a high-capacity cathode material for CIBs without crystal water, exhibiting a capacity of 179 mA h g(-1) in the ninth cycle and showing modest cycling performance. This material demonstrates that crystal water is not essential for high-capacity CIB electrode materials, encouraging ongoing research for developing higher-performance materials.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Achievements, Challenges, and Prospects of Calcium Batteries

M. Elena Arroyo-de Dompablo et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A High-Power Aqueous Zinc-Organic Radical Battery with Tunable Operating Voltage Triggered by Selected Anions

Yuwen Luo et al.

CHEMSUSCHEM (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Double-Sheet Vanadium Oxide as a Cathode Material for Calcium-Ion Batteries

Munseok S. Chae et al.

CHEMNANOMAT (2020)

Add to Collection

Review Energy & Fuels

Current status and future directions of multivalent metal-ion batteries

Yanliang Liang et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Calcium Molybdenum Bronze as a Stable High-Capacity Cathode Material for Calcium-Ion Batteries

Munseok S. Chae et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Spectroscopic Insights into the Electrochemical Mechanism of Rechargeable Calcium/Sulfur Batteries

Antonio Scafuri et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Reversible Calcium-Ion Insertion in NASICON-Type NaV2(PO4)3

Boosik Jeon et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Physics, Applied

Calcium–Sulfur Batteries: Rechargeable Calcium–Sulfur Batteries Enabled by an Efficient Borate‐Based Electrolyte (Small 39/2020)

Zhenyou Li et al.

Small (2020)

Add to Collection

Article Chemistry, Physical

High-Voltage Phosphate Cathodes for Rechargeable Ca-Ion Batteries

Sanghyeon Kim et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Plating and Stripping Calcium at Room Temperature in an Ionic-Liquid Electrolyte

Saeid Biria et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

First-principles study of Na insertion at TiO2 anatase surfaces: new hints for Na-ion battery design

Arianna Massaro et al.

NANOSCALE ADVANCES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Progress in Multivalent Metal (Mg, Zn, Ca, and Al) and Metal-Ion Rechargeable Batteries with Organic Materials as Promising Electrodes

Jian Xie et al.

SMALL (2019)

Add to Collection

Article Chemistry, Physical

Toward a Reversible Calcium-Sulfur Battery with a Lithium-Ion Mediation Approach

Xingwen Yu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Bilayered Mg0.25V2O5•H2O as a Stable Cathode for Rechargeable Ca-Ion Batteries

Xiaoming Xu et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Reversible Calcium Plating and Stripping at Room Temperature Using a Borate Salt

Abhinandan Shyamsunder et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Graphite as a Long-Life Ca2+-Intercalation Anode and its Implementation for Rocking-Chair Type Calcium-Ion Batteries

S. J. Richard Prabakar et al.

ADVANCED SCIENCE (2019)

Add to Collection

Article Electrochemistry

Electrochemical intercalation of Ca2+ ions into TiS2 in organic electrolytes at room temperature

Changhee Lee et al.

ELECTROCHEMISTRY COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Tracking electrochemical reactions inside organic electrodes by operando IR spectroscopy

Jan Bitenc et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Towards stable and efficient electrolytes for room-temperature rechargeable calcium batteries

Zhenyou Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Plating and Stripping of Calcium in an Alkyl Carbonate Electrolyte at Room Temperature

Saeid Biria et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Plating and stripping calcium in an organic electrolyte

Da Wang et al.

NATURE MATERIALS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Calcium-Ion Batteries: Current State-of-the-Art and Future Perspectives

Rosalind J. Gummow et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage

Meng Wang et al.

NATURE CHEMISTRY (2018)

Add to Collection

Article Chemistry, Physical

Applicability of Molybdite as an Electrode Material in Calcium Batteries: A Structural Study of Layer-type CaxMoO3

Marta Cabello et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Chemistry, Analytical

Electrochemical characterization of a layered alpha-MoO3 as a new cathode material for calcium ion batteries

Tomohiro Tojo et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2018)

Add to Collection

Review Chemistry, Physical

Perspective on Performance, Cost, and Technical Challenges for Practical Dual-Ion Batteries

Tobias Placke et al.

JOULE (2018)

Add to Collection

Article Chemistry, Physical

High performance Prussian Blue cathode for nonaqueous Ca-ion intercalation battery

Neal Kuperman et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

Calcium intercalation into layered fluorinated sodium iron phosphate

Albert L. Lipson et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

An Aqueous Ca-Ion Battery

Saman Gheytani et al.

ADVANCED SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

An Organic Cathode for Potassium Dual-Ion Full Battery

Ling Fan et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Towards a calcium-based rechargeable battery

A. Ponrouch et al.

NATURE MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

A Joint Computational and Experimental Evaluation of CaMn2O4 Polymorphs as Cathode Materials for Ca Ion Batteries

M. Elena Arroyo-de Dompablo et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Rechargeable Ca-Ion Batteries: A New Energy Storage System

Albert L. Lipson et al.

CHEMISTRY OF MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

The ORCA program system

Frank Neese

WILEY INTERDISCIPLINARY REVIEWS-COMPUTATIONAL MOLECULAR SCIENCE (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of the Damping Function in Dispersion Corrected Density Functional Theory

Stefan Grimme et al.

JOURNAL OF COMPUTATIONAL CHEMISTRY (2011)

Add to Collection

Article Chemistry, Physical

A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu

Stefan Grimme et al.

JOURNAL OF CHEMICAL PHYSICS (2010)

Add to Collection

Article Chemistry, Physical

Polytriphenylamine: A high power and high capacity cathode material for rechargeable lithium batteries

J. K. Feng et al.

JOURNAL OF POWER SOURCES (2008)

Add to Collection

Article Chemistry, Physical

The M06 suite of density functionals for main group thermochemistry, thermochemical kinetics, noncovalent interactions, excited states, and transition elements: two new functionals and systematic testing of four M06-class functionals and 12 other functionals

Yan Zhao et al.

THEORETICAL CHEMISTRY ACCOUNTS (2008)

Add to Collection

Article Chemistry, Physical

Pseudocapacitive contributions to electrochemical energy storage in TiO2 (anatase) nanoparticles

John Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2007)

Add to Collection

Article Chemistry, Physical

Balanced basis sets of split valence, triple zeta valence and quadruple zeta valence quality for H to Rn: Design and assessment of accuracy

F Weigend et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2005)

Add to Collection

Article Electrochemistry

Raman and FTIR spectroscopic characterization of electrochemically synthesized poly(triphenylamine), PTPA

C Kvarnström et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2002)

Add to Collection

Article Chemistry, Physical

A climbing image nudged elastic band method for finding saddle points and minimum energy paths

G Henkelman et al.

JOURNAL OF CHEMICAL PHYSICS (2000)

Add to Collection

Article Materials Science, Multidisciplinary

Electrochemical synthesis of electroactive polytriphenylamine

A Petr et al.

SYNTHETIC METALS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.