☆ 4.6 Article

Prediction of the Diameter of Biodegradable Electrospun Nanofiber Membranes: An Integrated Framework of Taguchi Design and Machine Learning

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2023)

Related references

Note: Only part of the references are listed.

Article Multidisciplinary Sciences

Sustainable fashion: Design of the experiment assisted machine learning for the environmental-friendly resin finishing of cotton fabric

Md Nahid Pervez et al.

Summary: Given the carcinogenic properties of formaldehyde-based chemicals, an alternative method for resin-finishing cotton textiles is needed urgently. A sustainable resin-finishing process for cotton fabric was introduced using a formaldehyde-free Knittex RCT resin approved by Bluesign (R), and the process parameters were optimized using the Taguchi L27 method. XRD analysis confirmed the crosslinking formation between resin and cotton fabric without altering the cellulose crystallization phase.

HELIYON (2023)

Add to Collection

Article Multidisciplinary Sciences

Evaluation of sisal fiber and aluminum waste concrete blend for sustainable construction using adaptive neuro-fuzzy inference system

Chima Dike Agor et al.

Summary: This research study evaluates the mechanical properties of aluminum waste-sisal fiber concrete using adaptive neuro-fuzzy inference system (ANFIS) for sustainable and eco-efficient engineering works. The results show that the inclusion of aluminum waste and substitution of sisal fiber affect the setting time, flexural strength, and compressive strength of the concrete. The ANFIS-model performed well with a high coefficient of determination, indicating a good relationship between the predicted and actual results.

SCIENTIFIC REPORTS (2023)

Add to Collection

Article Materials Science, Textiles

A novel approach to determining piezoelectric properties of nanogenerators based on PVDF nanofibers using iterative finite element simulation for walking energy harvesting

Mohammad Kashfi et al.

Summary: This study presents experimental characterization and finite element investigation of a piezoelectric nanogenerator based on electrospun PVDF nanofibers for walking energy harvesting. The piezoelectric response of the device was evaluated experimentally and was found to be favorable under low frequency cyclic impacts. A novel iterative finite element simulation was introduced to determine the piezoelectric properties of PVDF nanofibers, and the results were validated with experimental data. Through experimental and simulated studies on PVDF nanofibers nanogenerator integrated foam (PNIF), the optimal modulus for maximum efficiency of energy harvesting during human walking was determined.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

Optimized Bayesian adaptive resonance theory mapping model using a rational quadratic kernel and Bayesian quadratic regularization

Shunkun Yang et al.

Summary: The study proposes a BAM classification model that incorporates two overfitting suppression mechanisms, which improve adaptability to small sample data and prevent overfitting through rational quadratic kernel function and Bayesian quadratic regularization. Experimental results show a significant improvement in the accuracy, precision, recall, and F1-score of the BAM classifier.

APPLIED INTELLIGENCE (2022)

Add to Collection

Article Materials Science, Textiles

Toward improved performance of reactive dyeing on cotton fabric using process sensitivity analysis

Ping Zhang et al.

Summary: Through the study of the dyeing process of cotton fabric, it was found that the dyebath pH is the most influential factor, significantly affecting the total fixation efficiency. This study provides a foundation for further development in the textile industry.

INTERNATIONAL JOURNAL OF CLOTHING SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Polymer Science

Prediction of the fiber diameter of melt electrospinning writing by kriging model

Yu Xie et al.

Summary: Melt electrospinning writing (MEW) is a powerful technique for direct-writing complex and multiscaled structures, particularly in the biomedical field. This paper introduces the Kriging model to study the relationship between fiber diameter and various processing parameters, and demonstrates that the Kriging model outperforms the response surface model in terms of prediction accuracy. Additionally, implementing the Kriging model reduces fabrication time and material waste.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Research progress, models and simulation of electrospinning technology: a review

Yajin Guo et al.

Summary: Nanomaterials have sparked extensive research interest in the global materials science community, with electrospinning as a nanomaterial preparation technology showing significant advantages and finding applications in biomedicine, energy, and catalysis. Recent advancements and existing challenges in electrospinning technology and its diverse applications across various fields have been summarized and analyzed.

JOURNAL OF MATERIALS SCIENCE (2022)

Add to Collection

Article Engineering, Chemical

A comparative study between PCR, PLSR, and LW-PLS on the predictive performance at different data splitting ratios

Teck Fu Thien et al.

Summary: Principal component regression (PCR), partial least squares regression (PLSR), and locally weighted partial least squares (LW-PLS) models were studied for their predictive performance at different data splitting ratios, with LW-PLS performing better due to its capability to handle nonlinear data. Optimal splitting ratios were determined by evaluating root mean squared error, coefficient of determination, and error of approximation for five case studies. Split-sample ratios above 70% of training data showed significant improvements in predictive performance compared to base scenarios with higher E-a values.

CHEMICAL ENGINEERING COMMUNICATIONS (2022)

Add to Collection

Article Energy & Fuels

An adaptive boosting charging strategy optimization based on thermoelectric-aging model, surrogates and multi-objective optimization

Shaosen Su et al.

Summary: This paper presents an adaptive boosting charging strategy that incorporates capacity estimation based on operation parameters. The strategy allows for adaptive adjustment during the charging/discharging cycling process. The study establishes a coupling thermoelectric-aging battery model and uses a multi-objective optimization framework to balance charging time and capacity attenuation. The proposed strategy showed promising results in simulations.

APPLIED ENERGY (2022)

Add to Collection

Review Toxicology

Prediction reliability of QSAR models: an overview of various validation tools

Priyanka De et al.

Summary: This review discusses various validation tools for improving the quality and robustness of QSAR models, such as double cross-validation, small dataset modeler, intelligent consensus predictor, prediction reliability indicator, and quantitative read-across.

ARCHIVES OF TOXICOLOGY (2022)

Add to Collection

Article Soil Science

Organic matter in aqueous soil extracts: Prediction of compositional attributes from bulk soil mid-IR spectra using partial least square regressions

Alla Nasonova et al.

Summary: This study aimed to predict the dissolved organic C (DOC) concentration and water-extractable organic matter (WEOM) composition-related attributes of aqueous soil extracts using mid-infrared (IR) spectra of bulk soils and partial least square (PLS) regression. The results showed that the prediction of aromatic and fluorescent components in soil extracts was more successful than the prediction of DOC concentrations.

GEODERMA (2022)

Add to Collection

Article Multidisciplinary Sciences

Ag nanoparticles immobilized sulfonated polyethersulfone/polyethersulfone electrospun nanofiber membrane for the removal of heavy metals

Md Eman Talukder et al.

Summary: In this study, EUOL@AgNPs-SP ENMs nanofiber membranes were prepared by electrospinning and were used for the removal of lead and cadmium ions from water. The results showed that the nanofiber membranes had good adsorption capacity for both lead and cadmium, with the highest adsorption capacity at neutral pH. The membranes also exhibited good recyclability and reusability.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Engineering, Environmental

Fabrication of polyethersulfone/polyacrylonitrile electrospun nanofiber membrane for food industry wastewater treatment

Md Nahid Pervez et al.

Summary: In this study, a polyethersulfone/polyacrylonitrile (PES/PAN) blended nanofiber membrane was successfully fabricated and applied in the removal of methylene blue (MB) from aqueous solutions. The membrane demonstrated good structural integrity, mechanical stability, and hydrophilicity. The adsorption kinetics followed a pseudo-second-order model, and the adsorption process occurred in a monolayer form on the membrane surface. Additionally, it was found that PO43- positively influenced MB adsorption and the membrane could be recycled up to 5 times. Overall, the PES/PAN blend nanofiber membrane is a potential candidate for efficient wastewater treatment.

JOURNAL OF WATER PROCESS ENGINEERING (2022)

Add to Collection

Article Biochemistry & Molecular Biology

One-Step Fabrication of Novel Polyethersulfone-Based Composite Electrospun Nanofiber Membranes for Food Industry Wastewater Treatment

Md Nahid Pervez et al.

Summary: The authors developed an environmentally friendly electrospun nanofiber membrane for removing methylene blue from water. The membrane exhibited uniform size and thin diameter, good mechanical strength, and hydrophilicity. It showed high adsorption capacity at neutral pH and room temperature, and could be reused for multiple cycles. The unique membrane has potential for efficient wastewater treatment.

MEMBRANES (2022)

Add to Collection

Article Engineering, Manufacturing

Continuous self-crimped micro-nanofiber via one-step electrospinning

Chengdong Xiong et al.

Summary: A novel continuous self-crimped micro-nanofiber forming method has been developed through one-step electrospinning, showing that the crimp of polystyrene fibers can be triggered by comprehensive differences in diameter size, dielectric constant, electrical conductivity, and gap width between fibers on the substrate. The theoretical model of multiple forces and experimental results validate the forming mechanism of crimp.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Multidisciplinary Sciences

Sustainable traditional grass cloth fiber dyeing using the Taguchi L16 (4∧4) orthogonal design

Lina Lin et al.

Summary: This study explores the dyeing behavior of sustainable traditional grass fiber using industrial dyeing methods by incorporating Reactive Red 2 (R2), Reactive Blue 194 (B194), and Reactive Orange 5 (O5). Optimized dyeing conditions were obtained through orthogonal design and Taguchi technique. The structural characteristics of the grass cloth were analyzed using Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM).

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Chemistry, Physical

Electrospinning of Poly (Acrylamide), Poly (Acrylic Acid) and Poly (Vinyl Alcohol) Nanofibers: Characterization and Optimization Study on the Effect of Different Parameters on Mean Diameter Using Taguchi Design of Experiment Method

Tannaz Soltanolzakerin Sorkhabi et al.

Summary: In this study, nanofibers of poly (acrylic acid) (PAAc), polyacrylamide (PAAm) and poly (vinyl alcohol) (PVOH) were prepared using the electrospinning technique. The effects of electrospinning parameters on the diameter and morphology of polymer nanofibers were evaluated. The type of polymer was found to be the most significant factor, and the optimal combination to obtain the smallest diameter with minimum deviations was determined.

MATERIALS (2022)

Add to Collection

Review Materials Science, Biomaterials

Recent Advances in Designing Fibrous Biomaterials for the Domain of Biomedical, Clinical, and Environmental Applications

Narsimha Mamidi et al.

Summary: Nanofibers have unique properties and potential applications in various fields, including biomedicine, healthcare, environment, and biosensors. Electrospinning and centrifugal spinning techniques are widely used to produce nanofibers with high porosity, surface area, and diverse chemical compositions. Nanofibers are used in drug delivery, biomedical scaffolds, and other areas, and have great potential in nanomedicine and environmental remediation.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A Hybrid Battery Equivalent Circuit Model, Deep Learning, and Transfer Learning for Battery State Monitoring

Shaosen Su et al.

IEEE Transactions on Transportation Electrification (2022)

Add to Collection

Article Environmental Sciences

Sustainable Treatment of Food Industry Wastewater Using Membrane Technology: A Short Review

Md. Nahid Pervez et al.

Summary: Water is essential for food processing facilities, but it results in wastewater effluent that contains harmful substances. Treatment of food industry wastewater is crucial for improving process conditions and environmental impact. Membrane technologies, particularly electrospun nanofiber membranes, have shown promising results in treating food wastewater.

WATER (2021)

Add to Collection

Article Mathematics

Boscovich Fuzzy Regression Line

Pavel Skrabanek et al.

Summary: The study presents a new fuzzy linear regression method that approximates fuzzy relationships between independent and dependent variables. It is reliable, less sensitive to outliers compared to other fuzzy regression methods, and has linear time-complexity. The method ensures non-negativity of model parameter spreads.

MATHEMATICS (2021)

Add to Collection

Article Materials Science, Paper & Wood

Predicting the whiteness index of cotton fabric with a least squares model

Wan Sieng Yeo et al.

Summary: The study developed a multi-output LSSVR (MLSSVR) model using bleaching process variables and results from two different case studies to predict the WI of cotton. The predictive accuracy of the MLSSVR model was measured by RMSE, MAE, and R-2, showing that it outperformed other regression models in predicting WI with significantly lower RMSE and MAE values, and highest R-2 values up to 0.9999.

CELLULOSE (2021)

Add to Collection

Article Automation & Control Systems

Estimating the reliability of predictions in locally weighted partial least-squares modeling

Hiromasa Kaneko

Summary: The study analyzes the LWPLS method for modeling adaptive soft sensors and proposes a y-error model based on the relationship between MinED and the standard deviation of y errors. The proposed method demonstrates effectiveness in predicting the reliability of estimated y values.

JOURNAL OF CHEMOMETRICS (2021)

Add to Collection

Article Engineering, Environmental

Chitosan-functionalized sodium alginate-based electrospun nanofiber membrane for As (III) removal from aqueous solution

Md Eman Talukder et al.

Summary: The chitosan-modified-poly(vinyl alcohol)/sodium alginate nanofiber membrane showed high adsorption capacity for As(III) removal from aqueous solutions. The adsorption process was affected by initial pH and the presence of competing anions, while the nanofiber membrane could be easily regenerated and maintained high removal rates after multiple cycles.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Chemical

Missing data treatment for locally weighted partial least square-based modelling: A comparative study

Wan Sieng Yeo et al.

ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING (2020)

Add to Collection

Article Automation & Control Systems

Key performance index estimation based on ensemble locally weighted partial least squares and its application on industrial nonlinear processes

Xin Chen et al.

CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Low-temperature synthesis of novel polyvinylalcohol (PVA) nanofibrous membranes for catalytic dye degradation

Md Nahid Pervez et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Parametric PCA for unsupervised metric learning

Alexandre L. M. Levada

PATTERN RECOGNITION LETTERS (2020)

Add to Collection

Article Mathematical & Computational Biology

Multi-objective optimization of peel and shear strengths in ultrasonic metal welding using machine learning-based response surface methodology

Yuquan Meng et al.

MATHEMATICAL BIOSCIENCES AND ENGINEERING (2020)

Add to Collection

Article Engineering, Marine

Kernel-based support vector regression for nonparametric modeling of ship maneuvering motion

Zihao Wang et al.

OCEAN ENGINEERING (2020)

Add to Collection

Review Engineering, Chemical

A critical review on nanomaterials membrane bioreactor (NMs-MBR) for wastewater treatment

Md Nahid Pervez et al.

NPJ CLEAN WATER (2020)

Add to Collection

Article Polymer Science

Empirical model to simulate morphology of electrospun polycaprolactone mats

S. H. Yousefi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

Add to Collection

Article Engineering, Chemical

Adaptive Soft Sensor Development for Non-Gaussian and Nonlinear Processes

Wan Sieng Yeo et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Add to Collection

Article Engineering, Civil

Machine learning methods for better water quality prediction

Ali Najah Ahmed et al.

JOURNAL OF HYDROLOGY (2019)

Add to Collection

Review Multidisciplinary Sciences

A review on fabrication of nanofibers via electrospinning and their applications

Shariful IslamL et al.

SN APPLIED SCIENCES (2019)

Add to Collection

Article Automation & Control Systems

Model and estimators for partial least squares regression

Inge Svein Helland et al.

JOURNAL OF CHEMOMETRICS (2018)

Add to Collection

Article Chemistry, Physical

Multi-Response Optimization of Resin Finishing by Using a Taguchi-Based Grey Relational Analysis

Md. Nahid Pervez et al.

MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

An Experimental Approach to the Synthesis and Optimisation of a Green' Nanofibre

Md Nahid Pervez et al.

NANOMATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Investigating the Synthesis and Characterization of a Novel Green H2O2-Assisted, Water-Soluble Chitosan/Polyvinyl Alcohol Nanofiber for Environmental End Uses

Md Nahid Pervez et al.

NANOMATERIALS (2018)

Add to Collection

Article Materials Science, Paper & Wood

Structural relationships and optimization of resin-finishing parameters using the Taguchi approach

Faizan Shafiq et al.

CELLULOSE (2018)

Add to Collection

Article Engineering, Chemical

Optimization of Parameters for Electrospinning of Polyacrylonitrile Nanofibers by the Taguchi Method

G. K. Celep et al.

INTERNATIONAL POLYMER PROCESSING (2017)

Add to Collection

Review Polymer Science

Nanofiber technology: current status and emerging developments

Kenry et al.

PROGRESS IN POLYMER SCIENCE (2017)

Add to Collection

Article Engineering, Chemical

Development of Adaptive Soft Sensor Using Locally Weighted Kernel Partial Least Square Model

Wan Sieng Yeo et al.

CHEMICAL PRODUCT AND PROCESS MODELING (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Locally weighted kernel partial least squares regression based on sparse nonlinear features for virtual sensing of nonlinear time-varying processes

Xinmin Zhang et al.

COMPUTERS & CHEMICAL ENGINEERING (2017)

Add to Collection

Article Engineering, Chemical

Evaluation and Optimization of Electrospun Polyvinyl Alcohol Fibers via Taguchi Methodology

S. Pirsalami et al.

INTERNATIONAL POLYMER PROCESSING (2016)

Add to Collection

Article Automation & Control Systems

Covariance-based locally weighted partial least squares for high-performance adaptive modeling

Koji Hazama et al.

CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS (2015)

Add to Collection

Article Materials Science, Textiles

Electrospinning of polymethyl methacrylate nanofibers: optimization of processing parameters using the Taguchi design of experiments

Hossein Mohammad Khanlou et al.

TEXTILE RESEARCH JOURNAL (2015)

Add to Collection

Review Engineering, Chemical

Virtual Sensing Technology in Process Industries: Trends and Challenges Revealed by Recent Industrial Applications

Manabu Kano et al.

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN (2013)

Add to Collection

Article Engineering, Chemical

Assessment of parameters influencing fiber characteristics of chitosan nanofiber membrane to optimize fiber mat production

A. C. Areias et al.

POLYMER ENGINEERING AND SCIENCE (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.