Related references
Note: Only part of the references are listed.
Article
Nanoscience & Nanotechnology
Yun Xiao et al.
Summary: This study fabricated eco-friendly solar cells using interdigitated layers consisting of ZnO nanowires and infrared absorbing AgBiS2 nanocrystals. The quality of ZnO nanowires and its defects affecting solar cell performance were investigated. Oxygen vacancies and Zn interstitial sites were identified as the main recombination sites, hindering carrier collection in the solar cells. By reducing the concentration of these defects, the structural order and electron-phonon interaction in ZnO nanowires were improved. Furthermore, the study emphasized the significance of reducing defects in ZnO for improving not only colloidal quantum dot solar cells but also other emerging solar cell technologies.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Physical
Jibo Jiang et al.
Summary: In this work, a high efficiency and inexpensive non-noble metal catalysts as alternatives to hydrogen evolution reaction (HER) was designed. The synthesized ZnCo/MoS2-Co3S4/NF electrode exhibits excellent electrochemical performance and good stability.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
(2022)
Article
Chemistry, Physical
Morteza Kolaei et al.
Summary: This study investigates the effect of surface morphology of zinc oxide nanorods on the photoelectrochemical water splitting performance. By modifying the preparation conditions, branched zinc oxide nanorods were successfully synthesized. The branched structure provides a larger surface area, which facilitates the loading of cadmium sulfide nanoparticles, resulting in enhanced light absorption capability and improved photoelectrochemical water splitting performance.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Chemistry, Physical
Halil Esgin et al.
Summary: The study systematically investigated the effects of Cu doping and dye adsorption time on ZnO-DSSC, finding that Cu doping can enhance the efficiency of the solar cells by 20% and significantly reduce the dye adsorption time.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Chemistry, Physical
Lixia Sun et al.
Summary: A ternary photoanode of ZnO/CdO heterojunction decorated with reduced graphene oxide (rGO) was fabricated by a simple and effective electrochemical deposition and thermal decomposition method. The photoanode demonstrated improved visible light absorption range and photocurrent density compared to pure ZnO and ZnO/CdO photoanodes. The enhancement is attributed to the architecture of semiconductor heterojunctions and the decoration of rGO nanosheets.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Article
Chemistry, Physical
Jiejun Zeng et al.
Summary: Perovskite light-emitting diodes (PeLEDs) offer new possibilities for cost-effective and large-area electroluminescent devices. This Perspective article provides an overview of the chemical reactions that may occur at the interfaces between perovskite and ZnO-based electron-transport layers (ETLs), highlighting their significance in the fabrication of high-efficiency and stable PeLEDs.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS
(2022)
Article
Materials Science, Multidisciplinary
Yuxing Shi et al.
Summary: By loading the two-dimensional high crystalline g-C3N4 nanosheets onto the surface of three-dimensional yolk-shell ZnFe2O4, a 2D/3D HCCN/ZFO heterojunction with excellent photocatalytic properties was constructed. The formation of heterojunction can enhance photo-absorption and carrier separation efficiency, leading to a significant improvement in the photocatalytic degradation of tetracycline.
MATERIALS RESEARCH BULLETIN
(2022)
Article
Chemistry, Multidisciplinary
David Becker-Koch et al.
Summary: AgBiS2 nanocrystal solar cells have environmentally friendly composition and low energy consumption during fabrication, making them attractive for future applications. However, the stability of these devices under operational conditions is still unknown. This study explores the effects of oxygen and light on the stability of AgBiS2 nanocrystal solar cells and identifies their dependence on charge extraction layers. Additionally, ligands and water presence impact the oxidation rate of the nanocrystals.
Article
Energy & Fuels
Manoj Kumar et al.
Summary: Solar energy is a reliable, clean, and affordable renewable energy source, but the lack of a cheap and efficient material to convert solar energy into electricity is a significant obstacle. Recent research has focused on materials like Sb2Se3 and SnSe because they are made from a few elements, have high absorption coefficients, and are made from abundant materials. This study explores the factors affecting the performance of tin selenide-based solar cells based on an experimental report and simulation software. By optimizing parameters, the efficiency of the SnSe solar cell can be improved.
Article
Green & Sustainable Science & Technology
Mahmoud Sayed et al.
Summary: The study fabricated a robust S-scheme heterojunction that enhances the efficiency of CO2 photocatalytic conversion. This heterojunction is composed of 3D ZnO hollow spheres wrapped by 2D g-C3N4 layers. The photocatalyst showed a significantly higher CH4 production rate compared to pure ZnO and g-C3N4.
ADVANCED SUSTAINABLE SYSTEMS
(2022)
Article
Environmental Sciences
Juyoung Yu et al.
Summary: In the experiment, ZnO/AuNP photocatalysts were prepared, with ZnO/AuNP-30 exhibiting the best photocatalytic performance and achieving dye degradation efficiency of 78.65%. Photoelectrochemical measurements of ZnO/AuNP photoanodes indicated that doping AuNPs on the ZnO surface enhances its water-splitting activity.
Article
Chemistry, Physical
Zeping Li et al.
Summary: In this study, ZnO quantum dot (QD) / magnetron sputtered ZnO homojunction photodetectors with excellent performance were fabricated by systematically varying the thickness ratios between two ZnO layers. The balanced ratio resulted in extra adsorption-desorption sites from the ZnO QDs and accelerated carrier transportation from the highly crystallized magnetron sputtered ZnO layers. As a result, the fabricated ZnO homojunction photodetector showed significantly increased responsivity and external quantum efficiency, paving the way for ultra-sensitive UV photodetection.
APPLIED SURFACE SCIENCE
(2022)
Article
Electrochemistry
Yuyu Liu et al.
Summary: This paper presents the fabrication of a novel photoanode based on a semiconductor composite and tests its performance in QDSSCs. The experimental results show that the new photoanode exhibits better charge transfer and reaction rates, as well as higher photocurrents and power conversion efficiencies. After interface modification, the cell efficiency is further improved.
ELECTROCHIMICA ACTA
(2022)
Article
Chemistry, Physical
Yunlong Zhao et al.
Summary: The simultaneous etching and W-doping process improves the anchoring and charge transport properties of CdS/TiO2 films, enhancing their photoelectrochemical performances. The W-doped TiO2 shell provides more active sites and larger surface area for quantum-dots loading, while also promoting separation and transfer of photo-generated carriers.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Chemistry, Physical
Zhihao Chen et al.
Summary: A novel photocatalyst with 3D hierarchical structure and type II heterojunction was successfully prepared to enhance photocatalytic hydrogen production efficiency under visible light. The improved efficiency was attributed to the unique hollow tubular structure, shortened charge transfer path, and abundant reactive sites provided by ZnIn2S4 nanosheets.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Article
Chemistry, Physical
Jinsong Sun et al.
Summary: In this study, Bi-doped ZnO nanoarray was successfully prepared to enhance the photoelectrochemical performance of ZnO as a photoanode. Analysis showed that when the doping concentration was 5%, the fluorescence intensity was the lowest, corresponding to the lowest carrier recombination rate and the best photoelectric catalytic effect.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Chemistry, Physical
Narinder Kaur et al.
Summary: A 2D-3D heterojunction photoanode consisting of ZnO and In2S3 has been fabricated via a two-step physical vapor deposition and chemical vapor deposition method. The inclusion of 2D nanolayers of In2S3 on ZnO thin film leads to increased surface area and efficient electron-hole separation, resulting in improved photocurrent density and incident photon-to-current conversion efficiency. The ZnO/In2S3 heterojunction demonstrates higher photocurrent density, IPCE value, and stability compared to the pristine ZnO and In2S3 samples. The favorable band alignment and enhanced absorption in the visible range contribute to the enhanced photoelectrical response at the interface. This approach has potential applications in other 2D heterojunction systems with unique optical and electronic properties.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Materials Science, Multidisciplinary
Farzana Majid et al.
Summary: The hydrothermal approach was used to fabricate zinc oxide nanofibers and the effects of hydrothermal reaction time on dielectric, structural, morphological, and optical properties were investigated. Characterization techniques including X-ray diffraction, Fourier transform infrared microscopy, and energy dispersive spectrum were employed to analyze the formation of ZnO nanofibers. The results showed that the hydrothermal reaction time influenced the structural and optical properties of ZnO, making it a potential candidate for photocatalytic applications.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
(2022)
Article
Chemistry, Physical
Ummi Kalsum Hasanah Mohd Nadzim et al.
Summary: This study focuses on the performance of different morphologies of zinc oxide nanoparticles in thiophene desulfurization. The results show that flower-like zinc oxide flakes exhibit the best performance in thiophene desulfurization. Moreover, all zinc oxide morphologies apply to pseudo-second-order models. The optimal conditions for thiophene desulfurization are pH 7, 0.05 g/L zinc oxide flakes loading, and 90 minutes of contact time.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Chemistry, Physical
Cai-Hong Jiang et al.
Summary: In this article, MoS2/ZnO heterostructures with excellent nonlinear properties were prepared by interface engineering. The tunable nonlinear absorption behavior was attributed to complex charge transfers and carrier regulation characteristics. MoS2 nanosheets, ZnO nanorods, and MoS2/ZnO heterostructures exhibited saturation absorption, reverse saturation absorption, and coexisting absorption behavior, respectively.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Engineering, Environmental
Yanshan Wan et al.
Summary: This study demonstrates that different crystal facets have significant effects on the catalytic performance in the gas-phase degradation of NO. ZnO crystals with lower flat-band energy and enhanced (0002) facet show better performance in the photoelectrochemical water-oxidation, while those with exposed (101(-)1) facet have higher affinity to NO molecules. Additionally, the oxygen vacancies play a minor role in the photocatalytic oxidation of NO.
JOURNAL OF HAZARDOUS MATERIALS
(2022)
Article
Energy & Fuels
Prami Nandi et al.
Summary: Different hierarchical architectures of ZnO were synthesized via optimization of ethylenediamine (EDA) concentration, and these structures can effectively be used to enhance the performance of DSSC.
SOLAR ENERGY MATERIALS AND SOLAR CELLS
(2022)
Article
Materials Science, Multidisciplinary
M. I. Khan et al.
Summary: ZnO, MoS2, MoS2/ZnO/glass, and ZnO/MoS2/glass thin films were deposited on glass substrates using chemical bath deposition, showing hexagonal structure and varied band gap energies. Heterostructured films have larger grain sizes and potential applications in perovskite solar cells.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
(2022)
Article
Nanoscience & Nanotechnology
Ananta R. Fareza et al.
Summary: This study reports the synthesis of ZnO/ZnS/MoS2 ternary heterostructures grown directly on a substrate using a low-cost hydrothermal route for photoelectrochemical water splitting. The ZSM heterostructures exhibit enhanced photoelectrochemical activity compared to bare ZnO nanorods due to increased light absorption, higher surface active sites, and efficient charge separation.
ACS APPLIED NANO MATERIALS
(2022)
Article
Chemistry, Physical
Yingrui Wang et al.
Summary: This study investigates the synergistic effect of ternary photocatalysts with Defect MoS2 and Ti3C2 on CdS, enhancing its performance in photocatalytic hydrogen production. The results show that the Defect MoS2/Ti3C2/CdS photocatalyst exhibits excellent hydrogen production performance, surpassing CdS, Ti3C2/CdS, and Defect MoS2/CdS by 18.5, 12.4, and 1.2 times, respectively. The synergistic interaction between Defect MoS2, Ti3C2, and CdS improves carrier separation efficiency and suppresses recombination. The study proposes a plausible photocatalytic hydrogen production mechanism for Defect MoS2/Ti3C2/CdS. The dual co-catalysts offer a feasible approach for the development of composite catalysts.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
(2022)
Article
Chemistry, Physical
Wei -Lin Huang et al.
Summary: Ultraviolet (UV)-ozone treated ultrathin Nb-doped ZnO (NZO) films can act as efficient anode buffer layers to enhance the overall performance of organic light-emitting diodes (OLEDs). The UV-ozone treatment increases the oxygen content and work function of the NZO films, leading to a reduction in hole injection barrier and improved injection efficiency. Moreover, the treatment improves the surface energy and reduces the surface roughness of the NZO films, resulting in lower turn-on voltage, higher luminance, and improved current efficiency in the OLEDs.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Chemistry, Physical
Jingran Huang et al.
Summary: Producing high energy density, clean hydrogen fuel through photocatalytic water splitting is an important strategy for addressing the future shortage of fossil fuels, making it significant to improve photocatalytic performance. MXene, with high conductivity and layered nanostructure, serves as an excellent charge transport layer material to enhance the photocatalytic performance of composites. By preparing a novel 2D CdS/2D Nb2CTX composite, the photocatalytic H-2 evolution rate can be greatly improved.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Chemistry, Physical
Chunmei Li et al.
Summary: The performance of photoelectrochemical water splitting is limited by the photoanode reaction. In this study, high-density CdS nanosheets were grown on ZnO nanowire arrays using a sequential self-assembly approach. The obtained nanostructured array showed superior photocurrent density and photoconversion efficiency, which can be attributed to the CdS nanosheet layer.
SUSTAINABLE ENERGY & FUELS
(2022)
Article
Engineering, Environmental
Ramadan A. Geioushy et al.
Summary: An advanced photocatalyst heterojunction composed of two-dimensional MoS2 nanosheets and diamond-like shaped ZnO nanoparticles was successfully synthesized. The ZnO/MoS2 structure exhibited high photocatalytic activity in converting CO2 into methanol.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2022)
Article
Chemistry, Multidisciplinary
Zahra Samavati et al.
Summary: The study found that using vertically oriented zinc oxide nanorods as photo-anodes significantly improves the photovoltaic efficiency of organic solar cells, including increasing the open-circuit voltage and conversion performance. Additionally, the vertical nanorod structure facilitates electron mobility and oxygen reduction electro-catalytic action, reducing charge-transfer resistance and improving cell performance. This research contributes to sustainable electricity generation by reducing the reliance on non-renewable energy sources.
JOURNAL OF NANOSTRUCTURE IN CHEMISTRY
(2022)
Article
Nanoscience & Nanotechnology
Yun Xiao et al.
Summary: Oxygen vacancies and zinc interstitial sites are the main factors affecting the performance of solar cells, hindering carrier collection in the cells.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Multidisciplinary
M. Mgolombane et al.
Summary: ZnO, Co-doped ZnO, and Co-doped ZnO/rGO nanocomposites were successfully synthesized and characterized. Among them, Co-doped ZnO/rGO exhibited higher catalytic activity in the photoreduction of CO2 to CH3OH. The study provides important insights into the influence of Co and rGO on the activity of CO2 photoreduction over ZnO and suggests a strategy for tuning the CO2 photoreduction performance.
MATERIALS TODAY CHEMISTRY
(2021)
Article
Chemistry, Physical
Zheng Chen et al.
Summary: The study demonstrates the potential of Co-doped ZnO nanorods as a noble-metal-free photocatalyst for efficient water splitting under visible light illumination. The material shows a remarkable performance with high quantum yields, suggesting its promising application in harnessing sunlight for advanced photocatalytic processes.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2021)
Article
Chemistry, Physical
P. Dhamodharan et al.
Summary: The study investigated the performance of pristine ZnO and indium doped ZnO thin films as photoanodes in DSSCs, finding that the indium doped films had higher power conversion efficiency, with porous structure and transparency being key factors influencing performance.
SURFACES AND INTERFACES
(2021)
Article
Materials Science, Ceramics
Huey Jing Tan et al.
Summary: This study fabricated ZnO nanorods on ITO glass substrate through hydrothermal synthesis and investigated the impact of concentration and temperature on the morphology, crystallinity, and photoelectrochemical performance of the ZnO nanorods. The optimal ZnO nanorods exhibited high bandgap value and photocurrent density, with improved charge separation and transfer rate compared to ZnO nanoparticles. The research demonstrated superior photoelectrochemical performance of the ZnO nanorods produced.
CERAMICS INTERNATIONAL
(2021)
Article
Chemistry, Analytical
Sonalika Agarwal et al.
Summary: The design of hierarchical zinc oxide (ZnO) microstructures modified with silver (Ag) nanoparticles has been proven effective in enhancing hydrogen gas sensing performance. The Ag/ZnO hollow microstructures showed superior sensitivity, fast response and recovery time, as well as good stability, even at low hydrogen gas concentrations. This enhancement in sensing performance is attributed to the chemical and electronic sensitization effect of Ag nanoparticles, leading to a more sensitive sensor with improved selectivity.
SENSORS AND ACTUATORS B-CHEMICAL
(2021)
Article
Energy & Fuels
Shubham Bhatt et al.
Summary: In this study, an identical section of a core-shell ZnO Nanorod based lead-free perovskite solar cell was investigated for optimized device performance, resulting in high power conversion efficiency. Various factors affecting the solar cell's performance were rigorously analyzed, leading to improved parameters and increased efficiency.
Article
Energy & Fuels
Ahad Hussain Javed et al.
Summary: The study presents the facile synthesis of ZnO nanostructures with different morphologies for use in DSSC devices. ZnO nanorice demonstrated superior performance under 1 sun conditions, attributed to its large surface area, better conductivity, and enhanced dye adsorption compared to other synthesized ZnO nanostructures.
Article
Engineering, Chemical
Kun Chen et al.
Journal of Energy Chemistry
(2021)
Article
Chemistry, Physical
Jingyue Xuan et al.
Summary: In this study, an in situ grown and Pt-decorated ZnO nanoclusters gas sensor showed excellent room-temperature gas-sensing performance for H2S, with good stability and selectivity, capable of detecting H2S at ppb level. The synergistic effects of in situ growth and Pt decoration contribute to the enhanced gas-sensing behaviors of the sensor.
JOURNAL OF ALLOYS AND COMPOUNDS
(2021)
Article
Chemistry, Physical
Changlin Li et al.
Summary: The study presents the preparation of ZnO/CdS/CdSe heterostructures on Zn foil substrate using a facile three-step method, enhancing the light absorption ability and carrier separation efficiency of ZnO through the co-sensitization of CdS and CdSe. These heterostructures exhibit efficient photoelectrochemical properties and have potential for practical applications due to their low cost and high efficiency.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2021)
Article
Nanoscience & Nanotechnology
Shahab Sharifi Malvajerdi et al.
Summary: A novel method of oxide semiconductor nanoparticle synthesis based on high-voltage, high-current electrical switching discharge (HVHC-ESD) is proposed, successfully synthesizing zinc oxide (ZnO) nanorods with high crystal quality and outstanding optoelectronic characteristics. The method enables the rapid synthesis of ZnO nanorods with UV and visible emissions, and has potential applications in UV photodetectors.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Chemistry, Physical
Dong-Jin Yun et al.
Summary: ZnO nanorod arrays offer high surface area, but face challenges in charge collecting efficiency. This study synthesizes patterned ZnO nanorod arrays using a hydrothermal method and deposits an Ru metal layer using radio frequency sputtering, revealing the combination of Ru metal and ZnO nanorod arrays as a lower cost alternative with great potential.
APPLIED SURFACE SCIENCE
(2021)
Article
Chemistry, Physical
Peicheng Wei et al.
Summary: In this study, a novel mixed-dimensional structured photoanode was developed by grafting 3D worm-like BiVO4 onto a 2D thin WO3 underlayer, resulting in enhanced photocatalytic activity and charge separation efficiency. The doping of W6+ in WO3 contributes to increased electrical conductivity of the photoanode, while a robust NiCo2Ox catalyst coating provides excellent stability and high photocurrent density, making the 2D/3D WO3/BiVO4 photoanode a promising material for practical applications.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
(2021)
Article
Chemistry, Physical
Junhao Cai et al.
Summary: A novel 3D core-shell nanostructure decorated with plasmonic Au nanoparticles was prepared for efficient photoelectrochemical water splitting, achieving a photoconversion efficiency and photocurrent density 4.80 and 4.33 times higher than ZnO nanosheets, respectively.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
(2021)
Article
Energy & Fuels
Marzieh Makenali et al.
Summary: In this study, well-aligned ZnO nanorods with tunable length were successfully deposited and utilized in solar cells, balancing charge transport by adjusting the nanorod length and improving the morphology of the perovskite layer. The photovoltaic characteristics of the cells improved with increasing nanorod length up to 460 nm, but deteriorated further. Doping the perovskite structure with Cl- ions improved film uniformity and charge transport.
SOLAR ENERGY MATERIALS AND SOLAR CELLS
(2021)
Editorial Material
Chemistry, Physical
Kevin Sivula
ACS ENERGY LETTERS
(2021)
Article
Nanoscience & Nanotechnology
U. Banin et al.
Summary: This roadmap emphasizes the application of nanotechnology in addressing the challenges of energy conversion and focuses on solar energy conversion, including solar photovoltaics, solar water splitting, and bio-catalysis. Smart engineering design and semiconductor nanoparticles are utilized to improve solar-to-fuel conversion efficiency, while computational science is also meeting the challenges of nanomaterials synthesis.
Article
Chemistry, Physical
Erdi Akman
JOURNAL OF MOLECULAR LIQUIDS
(2020)
Article
Engineering, Environmental
Ruonan Wang et al.
CHEMICAL ENGINEERING JOURNAL
(2019)
Article
Electrochemistry
Guodong Zhao et al.
ELECTROCHIMICA ACTA
(2019)
Article
Chemistry, Physical
Somayeh Zarezadeh et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY
(2019)
Article
Chemistry, Physical
Guping Zhang et al.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2019)
Article
Chemistry, Physical
Xiaolin Liu et al.
APPLIED SURFACE SCIENCE
(2019)
Article
Chemistry, Physical
Meiling Sun et al.
JOURNAL OF POWER SOURCES
(2019)
Article
Chemistry, Physical
Linyu Zhu et al.
JOURNAL OF PHYSICAL CHEMISTRY C
(2018)
Article
Engineering, Electrical & Electronic
Peiyang Chen et al.
JOURNAL OF ELECTRONIC MATERIALS
(2017)
Article
Optics
Zukang Mo et al.
Article
Energy & Fuels
Jonathan D. Major et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS
(2017)
Article
Chemistry, Multidisciplinary
Yuchi Zhang et al.
Article
Nanoscience & Nanotechnology
Luping Zhu et al.
ACS APPLIED MATERIALS & INTERFACES
(2017)
Article
Multidisciplinary Sciences
Zhaoke Zheng et al.
SCIENTIFIC REPORTS
(2014)
Article
Chemistry, Physical
Chunmei Li et al.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2013)
