4.7 Article

PVDF/6H-SiC composite fiber films with enhanced piezoelectric performance by interfacial engineering for diversified applications

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Self-assembling SiC nanoflakes/MXenes composites embedded in polymers towards efficient electromagnetic wave attenuation

Yuanliang Zhou et al.

Summary: Ti3C2TX/SiC hybrids were synthesized with numerous hetero interfaces to enhance electromagnetic wave absorption, achieving a wide absorption bandwidth and high RL value. The superior 2D/2D hetero-interface properties improved interface polarizations and impedance matching, offering a promising way for enhanced electromagnetic wave absorption.

APPLIED SURFACE SCIENCE (2022)

Article Nanoscience & Nanotechnology

Ultra-Stable and Durable Piezoelectric Nanogenerator with All-Weather Service Capability Based on N Doped 4H-SiC Nanohole Arrays

Linlin Zhou et al.

Summary: In this study, an ultra-stable piezoelectric nanogenerator (PENG) based on N doped 4H-SiC nanohole arrays (NHAs) is proposed for harvesting ambient energy under different temperature and humidity conditions. The simulation results show a relationship between nanohole diameter and piezoelectric performance. The assembled PENG exhibits a high short circuit current density and demonstrates all-weather service capability even after 50 days of treatment.

NANO-MICRO LETTERS (2022)

Article Engineering, Manufacturing

Mechanically and electrically robust, electro-spun PVDF/PMMA blend films for durable triboelectric nanogenerators

Jiaoyuan Xia et al.

Summary: Electrospinning is an efficient method to prepare flexible nanofibers for wearable triboelectric nanogenerators. This study successfully improves the mechanical and electrical properties of electrospun films, leading to a stable and high-performance nanogenerator.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Article Materials Science, Multidisciplinary

Mild fabrication of SiC/C nanosheets with prolonged cycling stability as supercapacitor

Shuang Liu et al.

Summary: A facile and mild approach was developed to synthesize C-coated SiC nanosheets (SiC/C NSs) using wet-chemical etching in hydrofluoric acid. The prepared SiC/C NSs exhibited smooth rectangular sheets with a carbon layer and showed promising electrochemical performance as a supercapacitor material.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Engineering, Chemical

Two antagonistic effects of flow/mixing on reactive polymer blending

Wei-Yun Ji et al.

Summary: This study reveals that in reactive polymer blending, flow/mixing can both promote copolymer formation by creating interfaces and enhance collisions between reactive groups, as well as potentially pull the copolymer out of the interfaces and migrate it to one of the two polymer components of the blend, reducing its compatibilization efficiency.

AICHE JOURNAL (2022)

Article Chemistry, Applied

Porous cellulose composite aerogel films with super piezoelectric properties for energy harvesting

Yiheng Song et al.

Summary: Flexible porous piezoelectric aerogel films based on TOCN and Mo-S2 nanosheets were developed, exhibiting good piezoelectric properties. The aerogel film with 6 wt% MoS2 showed the best output performance, generating high open circuit voltage and short-circuit current.

CARBOHYDRATE POLYMERS (2022)

Article Chemistry, Physical

The mechanism of a PVDF/CsPbBr3 perovskite composite fiber as a self-polarization piezoelectric nanogenerator with ultra-high output voltage

You Xue et al.

Summary: The self-polarization effect in PVDF/CsPbBr3 composite fibers is studied, which demonstrates outstanding voltage output under self-polarization conditions. The mechanism of self-polarization is revealed by analyzing the interfacial charge and electric field. The research also validates the practical applicability of PVDF/CsPbBr3-PENG in harvesting energy from human finger taps and tests its stability.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Materials Science, Multidisciplinary

High pressure responsive luminescence of flexible Eu3+ doped PVDF fibrous mats

Carlos Hernandez et al.

Summary: In this study, flexible PVDF fibrous mats doped with Eu3+ sources were developed using Forcespinning method. The high-pressure optical properties of Eu3+ ions in EN-PF and ES-PF were investigated, showing different extent of changes in their characteristics with increasing pressure. Irreversible changes were observed in both Eu3+ doped PVDF systems under high-pressure conditions, presenting opportunities for multifunctional applications.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Engineering, Electrical & Electronic

High-performance piezoelectric nanogenerator based on electrospun ZnO nanorods/P(VDF-TrFE) composite membranes for energy harvesting application

Lanlin Ye et al.

Summary: A novel flexible zinc oxide nanorods/poly(vinylidene fluoride-trifluoroethylene) nanocomposite was prepared by electrospinning for fabricating a piezoelectric nanogenerator. The addition of different levels of piezoelectric ZnO nanorods can significantly improve the performance of the piezoelectric nanogenerator.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Article Chemistry, Physical

Improving piezoelectric properties of PVDF fibers by compositing with BaTiO3-Ag particles prepared by sol-gel method and photochemical reaction

Soroush Dashtizad et al.

Summary: The study demonstrates that an increase in the BaTiO3 content leads to higher piezoelectric output voltage in PVDF-BaTiO3-Ag composite fibers, primarily attributed to an increase in the beta phase content and the presence of silver as a conductive phase.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Enhanced electromagnetic wave absorption performance of polymer/SiC-nanowire/MXene (Ti3C2Tx) composites

Li Ma et al.

Summary: The study successfully developed nanocomposites with superior electromagnetic wave absorption properties by incorporating SiC nanowires/MXene heterogeneous structures into the PVDF matrix. These composites achieved an effective bandwidth of 5.0 GHz in the Ku-band, with low reflection loss and excellent electromagnetic wave absorption performance.

CARBON (2021)

Article Materials Science, Multidisciplinary

Tunable fabrication of single-crystalline CsPbI3 nanobelts and their application as photodetectors

Tao Yang et al.

Summary: Lead halide perovskites have shown great potential in optoelectronic applications, with CsPbI3 nanobelts grown via solution process exhibiting uniform morphology. Photodetectors based on individual CsPbI3 nanobelts demonstrate high external quantum efficiency and responsivity, along with a competitive detectivity comparable to Si photodetectors.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

Review Materials Science, Ceramics

Progress and challenges towards additive manufacturing of SiC ceramic

Rujie He et al.

Summary: The emergence of additive manufacturing technologies has opened up new avenues for the fabrication of SiC ceramic products. This paper reviews the recent developments in additive manufacturing of SiC ceramic, highlights key challenges, and forecasts potential opportunities for the future. The aim is to provide guidance for the additive manufacturing of SiC ceramic and other structural ceramics.

JOURNAL OF ADVANCED CERAMICS (2021)

Review Chemistry, Physical

Recent advances in cellulose-based piezoelectric and triboelectric nanogenerators for energy harvesting: a review

Yiheng Song et al.

Summary: Cellulose is a rich natural polymer resource with various eco-friendly properties, and recent research on nanogenerators has focused on energy harvesting. This paper reviews the latest developments and optimization strategies of cellulose-based piezoelectric, triboelectric, and hybrid nanogenerators.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Nanoscience & Nanotechnology

Nanoporous 6H-SiC Photoanodes with a Conformal Coating of Ni-FeOOH Nanorods for Zero-Onset-Potential Water Splitting

Baoying Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Engineering, Electrical & Electronic

Preparation of PVDF flexible piezoelectric film with high β-phase content by matching solvent dipole moment and crystallization temperature

Xiongjie Li et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Article Chemistry, Physical

Interfacial electronic properties of ferroelectric nanocomposites for energy storage application

Bingcheng Luo et al.

MATERIALS TODAY ENERGY (2019)

Article Materials Science, Multidisciplinary

Hybrid nanogenerator of BaTiO3 nanowires and CNTs for harvesting energy

Yupei Wang et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Article Multidisciplinary Sciences

Enhanced piezo-response in copper halide perovskites based PVDF composite films

Sheng Huang et al.

SCIENCE BULLETIN (2018)

Article Engineering, Manufacturing

Enhancement of dielectric and electrical properties in BT/SiC/PVDF three-phase composite through microstructure tailoring

Zhenchong Zhang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Article Chemistry, Multidisciplinary

Performance Optimization of Vertical Nanowire- based Piezoelectric Nanogenerators

Ronan Hinchet et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Article Polymer Science

alpha to beta Phase Transformation and Microestructural Changes of PVDF Films Induced by Uniaxial Stretch

V. Sencadas et al.

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2009)

Article Engineering, Chemical

Numerical Simulation and Experimental Validation of Mixing Performance of Kneading Discs in a Twin Screw Extruder

Xian-Ming Zhang et al.

POLYMER ENGINEERING AND SCIENCE (2009)

Review Materials Science, Multidisciplinary

Prospects for SiC electronics and sensors

Nick G. Wright et al.

MATERIALS TODAY (2008)

Article Engineering, Chemical

Nano-scale phenomena and applications in polymer processing

Guo-Hua Hu et al.

CHEMICAL ENGINEERING SCIENCE (2007)