☆ 4.5 Article

Modeling Anisotropic Ductile Fracture Behavior of Sheet Metals Considering Non-directionality of Equi-Biaxial Tensile Fracture

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

A User-Friendly Anisotropic Yield Function for Modeling Anisotropy of BCC and FCC Sheet Metals

Tianyu Xu et al.

Summary: This study develops a user-friendly anisotropic yield function for capturing the plastic anisotropy of sheet metals. The proposed function improves simulation efficiency and reduces experimental cost by balancing predictability and cost in parameter calibration. The results show that the function performs well in describing the anisotropic behavior and hardening behavior of different materials.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of Anisotropic Fracture Behavior of 7075-T6 Aluminum Alloy Sheet under Various Stress States

Tianyu Xu et al.

Summary: The anisotropic fracture behavior of 7075-T6 aluminum alloy sheet was investigated through tensile tests and digital image correlation technique. The results showed the influence of loading directions and stress state on failure strains. Fracture morphology was observed to understand the failure model and mechanisms. An anisotropic fracture model based on DF2016 was used to describe the fracture behavior. Additionally, the impact of plastic anisotropy on the formability of the sheet was examined.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023)

Add to Collection

Article Mechanics

Micromechanics-based modeling of plastic and ductile fracture of aluminum alloy 2024-O

Jinwoo Lee et al.

Summary: In this study, the plastic deformation behavior, ductile damage, and fracture of aluminum alloy 2024-O materials were investigated under quasi-static conditions. Experimental tests were conducted to characterize the plasticity and damage behavior, and finite element simulations were performed to predict the behavior. The results showed that the modified GTN model provided better predictions of the plasticity and ductile damage behavior.

ENGINEERING FRACTURE MECHANICS (2022)

Add to Collection

Article Engineering, Mechanical

The effect of material orientation on void growth

N. Hosseini et al.

Summary: This study reveals the effect of material orientation and angular misalignment on void growth, and proposes a strategic utilization of material orientation and angular misalignment to control void growth.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Article Mechanics

Extension of a shear-controlled ductile fracture criterion by considering the necking coalescence of voids

Zhao Zhang et al.

Summary: A new fracture criterion is developed considering the role of necking coalescence of voids, demonstrating improved prediction accuracy for different metals under various stress states.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A New Ductile Fracture Model for Edge Cracking Prediction of Ultra-High Strength Steel Considering Damage Accumulation in Blanking Process

Daizhou Li et al.

Summary: A new ductile fracture criterion is proposed to accurately predict the edge cracking of ultra-high strength steel by considering the damage accumulation near the blanked edge.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

Add to Collection

Article Engineering, Mechanical

Modeling anisotropic ductile fracture of AA7075-T6 sheet for sheet metal forming considering anisotropic stress state

Tianyu Xu et al.

Summary: In this study, a new anisotropic ductile fracture model is proposed to accurately characterize the fracture behavior of high-strength aluminum alloy sheet under various stress states. The model takes into consideration the effect of material anisotropy on stress state and successfully predicts the anisotropic ductile fracture behavior.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

Add to Collection

Article Engineering, Mechanical

Porous plasticity revisited: Macroscopic and multiscale modeling

Gilles Rousselier

Summary: The paper compares the mechanical behaviors of the GTN model and the Rousselier model, revealing their different performances in strain localization, as well as discussing issues related to void growth and finite element discretization. The GTN model is unable to achieve plane strain localization under certain stress conditions, while the Rousselier model is capable of achieving this goal under all stress conditions.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Add to Collection

Article Mechanics

A user-friendly anisotropic ductile fracture criterion for sheet metal under proportional loading

Yanshan Lou et al.

Summary: An user-friendly approach was introduced to model the loading direction effect on fracture limits of sheet metals, combined with a newly developed fracture criterion. The method demonstrated high accuracy in predicting anisotropic fracture in different loading conditions for aluminum alloy and steel sheet.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

An experimental study on pre-stretched double-chamber 6000-series aluminium profiles subjected to quasi-static and dynamic axial crushing

Kristin Qvale et al.

Summary: This study examined the behavior of double-chamber AA6063 and AA6082 aluminum profiles under quasi-static and dynamic axial crushing, revealing that higher pre-stretch resulted in a more ductile material with slightly lower ultimate tensile strength. Dynamic loading was found to cause a larger amount of fracture compared to quasi-static loading through visual inspection and X-ray Computed Tomography scans.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Industrial

A unified model of ductile fracture considering strain rate and temperature under the complex stress states

Jing Cao et al.

Summary: A new fracture test device and specially designed specimen were developed to study fracture behavior under complex stress states by changing stress state through increased groove bridge angle, leading to the establishment of a unified thermoforming fracture model.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

An improved shear modified GTN model for ductile fracture of aluminium alloys under different stress states and its parameters identification

Zao He et al.

Summary: The study proposed an improved shear modified GTN model for predicting ductile fracture of materials under different stress states, and validated the accuracy of the model and feasibility of the damage parameters identification method through FE analysis.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Mechanics

Influence of crystallographic orientation on the void growth at the grain boundaries in bi-crystals

Manjunath Dakshinamurthy et al.

Summary: This study investigates void growth and morphology evolution in fcc bi-crystals using crystal plasticity finite element method. Different crystal orientations (hard-hard, soft-soft, soft-hard) are employed to model the mechanical response of the bi-crystal. The presence and growth of voids have an impact on the heterogeneity of lattice rotation and grain fragmentation in neighboring areas.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

Effect of non-associated flow rule on fracture prediction of metal sheets using a novel anisotropic ductile fracture criterion

Hung Quach et al.

Summary: The ductile fracture behavior of anisotropic materials was studied using the uncoupled ductile fracture criterion for aluminum alloys 6016-AC200. The model considers void nucleation, growth, and evolution of void coalescence, with anisotropic yield function and non-associated flow rule applied for accuracy. Experimental tests and simulations confirmed the efficacy of the proposed fracture criterion for predicting onset of ductile fracture in sheet metal forming.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Mathematics, Applied

A simple and computationally efficient stress integration scheme based on numerical approximation of the yield function gradients: Application to advanced yield criteria

N. Hosseini et al.

Summary: In this paper, a stress integration scheme based on numerical approximation of the yield function gradients was modified to implement three different constitutive models in a finite element code. Comparisons were made with additional calculations to show that the numerical approximation scheme can improve computational efficiency and accuracy.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2021)

Add to Collection

Article Engineering, Mechanical

The modified GTN-Thomason criterion for modelling of ductile fracture considering shear factor and size effect in micro-scaled plastic deformation

W. T. Li et al.

Summary: Coarse grains result in fewer voids on fracture surfaces and higher flow strength, while finer grains accelerate the occurrence of shear-dominated fracture and hinder normal tensile fracture. By introducing shear factor and size effect, the modified GTN-Thomason criterion predicts ductile fracture in micro-scaled plastic deformation and enhances understanding and prediction of ductile fracture.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Mechanics

Development of a ductile failure model sensitive to stress triaxiality and Lode angle

M. Ganjiani et al.

Summary: The anisotropic failure model proposed by Ganjiani has been extended and applied to predict failure phenomena in materials, showing good predictive performance. The simulations focused on the effects of loading on fracture onset, and comparative investigations with other failure criteria were provided. The model has significant potential to predict ductile failure and FFLD, especially for anisotropic materials, as indicated by the results.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

A new approach for fracture prediction considering general anisotropy of metal sheets

Namsu Park et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Add to Collection

Article Mechanics

Anisotropic fracture modeling of sheet metals: From in-plane to out-of-plane

Bin Gu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

Add to Collection

Article Engineering, Industrial

Damage in metal forming

A. E. Tekkaya et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Engineering, Industrial

Investigations on failure-to-fracture mechanism and prediction of forming limit for aluminum alloy incremental forming process

Xuepeng Zhan et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

Add to Collection

Article Mechanics

Modeling anisotropic ductile fracture behavior of Ti-6Al-4V titanium alloy for sheet forming applications at room temperature

Bingtao Tang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

Add to Collection

Review Engineering, Mechanical

A review on theory and application of plastic meso-damage mechanics

Gui Li et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Add to Collection

Article Engineering, Manufacturing

Advances in anisotropy of plastic behaviour and formability of sheet metals

Dorel Banabic et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2020)

Add to Collection

Proceedings Paper Engineering, Mechanical

A novel uncoupled ductile fracture criterion for prediction of failure in sheet metal forming

H. Quach et al.

INTERNATIONAL DEEP-DRAWING RESEARCH GROUP (IDDRG 2020) (2020)

Add to Collection

Article Mechanics

Numerical modeling for accurate prediction of strain localization in hole expansion of a steel sheet

Jeong-Yeon Lee et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)

Add to Collection

Article Mechanics

Alternative approach to model ductile fracture by incorporating anisotropic yield function

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Overview on the Prediction Models for Sheet Metal Forming Failure: Necking and Ductile Fracture

Qi Hu et al.

ACTA MECHANICA SOLIDA SINICA (2018)

Add to Collection

Article Engineering, Mechanical

Predicting shear fracture of aluminum 6016-T4 during deep drawing: Combining Yld-2000 plasticity with Hosford Coulomb fracture model

Maysam B. Gorji et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

A ductile fracture model considering stress state and Zener-Hollomon parameter for hot deformation of metallic materials

Xiaoqing Shang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

Damage and failure at negative stress triaxialities: Experiments, modeling and numerical simulations

Michael Bruenig et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2018)

Add to Collection

Article Mechanics

Anisotropic fracture forming limit diagram considering non-directionality of the equi-biaxial fracture strain

Namsu Park et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

Add to Collection

Article Engineering, Civil

Implementation of Y1d96 anisotropy plasticity theory for estimation of polar effective plastic strain based failure limit of pre-strained thin steels

Shamik Basak et al.

THIN-WALLED STRUCTURES (2018)

Add to Collection

Article Mechanics

Establishment and verification of two-component ductile fracture criteria with high estimation accuracy

Fei-Fan Li et al.

ENGINEERING FRACTURE MECHANICS (2018)

Add to Collection

Article Engineering, Mechanical

Anisotropic ductile fracture criterion based on linear transformation

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Add to Collection

Article Engineering, Mechanical

Fracture-based forming limit criteria for anisotropic materials in sheet metal forming

Namsu Park et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Add to Collection

Article Mechanics

Modeling of ductile fracture from shear to balanced biaxial tension for sheet metals

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Ductile Fracture Initiation of Anisotropic Metal Sheets

Liang Dong et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Prediction of fracture initiation in square cup drawing of DP980 using an anisotropic ductile fracture criterion

N. Park et al.

36TH IDDRG CONFERENCE - MATERIALS MODELLING AND TESTING FOR SHEET METAL FORMING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Failure of metals I: Brittle and ductile fracture

A. Pineau et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Ductile failure modeling

Ahmed Amine Benzerga et al.

INTERNATIONAL JOURNAL OF FRACTURE (2016)

Add to Collection

Article Engineering, Mechanical

Ductile fracture prediction for metal sheets using all-strain-based anisotropic eMMC model

Yueqian Jia et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

Add to Collection

Article Engineering, Mechanical

A virtual laboratory using high resolution crystal plasticity simulations to determine the initial yield surface for sheet metal forming operations

Haiming Zhang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2016)

Add to Collection

Article Engineering, Mechanical

A nonlinear model for ductile damage accumulation under multiaxial non-proportional loading conditions

Luca Cortese et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2016)

Add to Collection

Article Engineering, Mechanical

Ductile fracture experiments with locally proportional loading histories

Christian C. Roth et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Evolutionary anisotropy and flow stress in advanced high strength steels under loading path changes

Jinwoo Lee et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Mechanics

Anisotropic Hosford-Coulomb fracture initiation model: Theory and application

Gongyao Gu et al.

ENGINEERING FRACTURE MECHANICS (2015)

Add to Collection

Article Mechanics

A comparative study of three groups of ductile fracture loci in the 3D space

Yuanli Bai et al.

ENGINEERING FRACTURE MECHANICS (2015)

Add to Collection

Article Mechanics

Micromechanically-motivated phenomenological Hosford-Coulomb model for predicting ductile fracture initiation at low stress triaxialities

Dirk Mohr et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Add to Collection

Article Mechanics

A Lode-dependent enhanced Lemaitre model for ductile fracture prediction at low stress triaxiality

T. -S. Cao et al.

ENGINEERING FRACTURE MECHANICS (2014)

Add to Collection

Article Engineering, Mechanical

Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

Add to Collection

Article Engineering, Mechanical

Stress-state-dependence of damage strain rate tensors caused by growth and coalescence of micro-defects

Michael Bruenig et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

Add to Collection

Article Engineering, Mechanical

Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading - Part II: Ductile fracture

Meng Luo et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2012)

Add to Collection

Article Mechanics

New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

Add to Collection

Article Mechanics

Partially coupled anisotropic fracture model for aluminum sheets

Allison M. Beese et al.

ENGINEERING FRACTURE MECHANICS (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Application of extended Mohr-Coulomb criterion to ductile fracture

Yuanli Bai et al.

INTERNATIONAL JOURNAL OF FRACTURE (2010)

Add to Collection

Article Mechanics

Constitutive modeling of void shearing effect in ductile fracture of porous materials

Liang Xue

ENGINEERING FRACTURE MECHANICS (2008)

Add to Collection

Article Mechanics

Modification of the Gurson Model for shear failure

K. Nahshon et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Anisotropic ductile fracture Part I: experiments

AA Benzerga et al.

ACTA MATERIALIA (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Anisotropic ductile fracture Part II: theory

AA Benzerga et al.

ACTA MATERIALIA (2004)

Add to Collection

Article Engineering, Mechanical

On fracture locus in the equivalent strain and stress triaxiality space

YB Bao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.