☆ 4.6 Article

Titania-coated silica nanocomposite for L-band noise-like pulse fiber laser

JOURNAL OF LUMINESCENCE (2023)

Related references

Note: Only part of the references are listed.

Article Optics

Single crystalline BiOCl nanosheets with oxygen vacancies for ultrafast mode-locking operation

Cong Zhang et al.

Summary: Single-crystalline square BiOCl nanosheets with oxygen vacancies were synthesized via a simple solvothermal route. These nanosheets were then deposited on a tapered microfiber to act as a saturable absorber. By interacting with the BiOCl saturable absorber, a soliton mode-locked Er-doped fiber laser was successfully demonstrated, producing ultrafast pulses with a pulse duration of 990 fs, a central wavelength of 1563 nm, and a FWHM bandwidth of 3.2 nm. The signal-to-noise ratio reached 36 dB at a fundamental repetition rate of 7.9 MHz.

OPTICS AND LASER TECHNOLOGY (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Artificial saturable absorbers for ultrafast fibre lasers

Sergey M. Kobtsev

Summary: The paper discusses the application of artificial saturable absorbers in fiber lasers, comparing their advantages and drawbacks with material-based natural counterparts, and discussing the future prospects in passive mode locking components in fiber-optical technology. Analysis demonstrates that artificial absorbers relying on short optical fibers hold higher potential and may become a real alternative to natural absorbers.

OPTICAL FIBER TECHNOLOGY (2022)

Add to Collection

Article Optics

Broadband GaSb saturable absorber for pulse generation from C-band to mid-infrared

Shaodong Hou et al.

Summary: In this paper, a broadband optical-intensity modulator using magnetron-sputtered GaSb thin film is reported, which enables pulse generation in different wavelength ranges and shows great potential for nonlinear optical applications.

JOURNAL OF LUMINESCENCE (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Orthopedics-Related Applications of Ultrafast Laser and Its Recent Advances

Celina L. Li et al.

Summary: Ultrafast lasers in orthopedic procedures offer higher precision and minimal thermal damages compared to conventional laser systems, but limitations in material removal rate and pulse average power hinder their surgical applications. Advances in laser texturing for implants show potential for bioactivation and osteointegration, prompting further exploration of the benefits ultrafast lasers could offer in orthopedic surgery.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrashort Pulse Excited Tip-Enhanced Raman Spectroscopy in Molecules

Yang Luo et al.

Summary: Tip-enhanced Raman spectroscopy (TERS) allows for the tracing of vibrational fingerprints of molecules and low-dimensional materials with subnanometer resolution. The localization of light in the plasmonic nanocavity of the STM enables high spatial resolution in STM-TERS. However, the temporal resolution is currently limited. In this study, stable TERS measurements were demonstrated from subphthalocyanine (SubPc) molecules excited by 500 fs long laser pulses in a low-temperature (LT) ultrahigh-vacuum (UHV) STM. The intensity of the TERS signal scales linearly with the increasing flux of the laser pulses and exponentially with the decreasing gap-size of the plasmonic nanocavity. Furthermore, the characteristic features of TERS excited with ultrashort pulses were compared with those excited with a continuous-wave (CW) laser.

NANO LETTERS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Nano-tungsten trioxide saturable absorber for L-band noise-like pulse mode-locked fiber laser

M. A. W. Abdul Hadi et al.

Summary: In this study, noise-like pulses (NLP) were generated in an L-band erbium-doped fiber laser incorporating a tapered fiber structure decorated with nanotungsten trioxide and polydimethylsiloxane (WO3/PDMS). A Raman pump unit with a pump power of 3.5 W was used for core-pumping a 7 m long highly doped erbium-doped fiber. At maximum pump power, the NLP lasing wavelength was 1602 nm with a broad spectral bandwidth of 19.05 nm. The generated pulse had an energy of 10.38 nJ and an output fluence of 19.66 mJ/cm2. The measured NLP spike pulse width was 178.87 fs within a 56.56 ps pedestal range.

OPTICAL FIBER TECHNOLOGY (2022)

Add to Collection

Article Instruments & Instrumentation

GeTe based modulator for the generation of soliton, soliton molecule and bright-dark soliton pair

Guomei Wang et al.

Summary: This study experimentally investigates the use of GeTe as a modulator in an Er-doped fiber laser for generating conventional solitons, soliton molecules, and bright-dark soliton pairs. The GeTe exhibited typical saturable absorption properties and allowed for the generation of ultrashort pulses. By controlling the pump power and polarization, different soliton states can be achieved. These findings suggest that GeTe has potential as a modulator for soliton fiber lasers.

INFRARED PHYSICS & TECHNOLOGY (2022)

Add to Collection

Article Optics

Demonstration of passively Q-switched and mode-locked operations through dispersion control in Er-doped fiber lasers with a cylindrite-based saturable absorber

Shuo Sun et al.

Summary: This study successfully prepared cylindrite nanosheets and studied their nonlinear optical absorption properties. Q-switched and mode-locked operations were achieved by adjusting dispersion management and intracavity net dispersion. The cylindrite-based optical modulator shows potential and feasibility in the field of ultrashort pulse fiber lasers.

JOURNAL OF LUMINESCENCE (2022)

Add to Collection

Article Optics

Nonlinear photonics device based on double perovskite oxide Ba2LaTaO6 for ultrafast laser generation

Penglai Guo et al.

Summary: In this study, a saturable absorber (SA) based on a tapered fiber and double perovskite oxide Ba2LaTaO6 was investigated for ultrashort pulse fiber laser generation. The Ba2LaTaO6 synthesized through a high-temperature solid-state reaction method showed high non-linear optical absorption performance. The experimental results demonstrated the capability of Ba2LaTaO6 to achieve conventional soliton pulses, harmonic mode-locking, and three-order soliton molecules in passively mode-locked fiber lasers.

OPTICS AND LASER TECHNOLOGY (2022)

Add to Collection

Article Computer Science, Information Systems

Generation of noise-like pulses and soliton rains in a graphene mode-locked erbium-doped fiber ring laser

Pinghua Tang et al.

Summary: The study demonstrates the generation of noise-like pulses and soliton rains in a graphene saturable absorber mode-locked erbium-doped fiber laser. By adjusting the cavity polarization state, multiple solitons can be achieved. The experimental results contribute to a better understanding of nonlinear pulse dynamics in ultrafast optics.

FRONTIERS OF INFORMATION TECHNOLOGY & ELECTRONIC ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Templated synthesis of NiO/SiO2 nanocomposite for dye removal applications: Adsorption kinetics and thermodynamic properties

Rimsha Rubab et al.

Summary: This study successfully synthesized NiO/SiO2 nanocomposite using a soft templating approach, showing excellent adsorption performance for Rhodamine B dye removal. The adsorption process followed pseudo-second-order kinetics and Langmuir isotherm model, with high adsorption capacity and stability.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Nanosized titanium dioxide saturable absorber for soliton mode-locked thulium-doped fiber laser

M. H. M. Ahmed et al.

Summary: The potential of nanosized titanium dioxide (TiO2) in forming ultrashort pulses using a ring cavity thulium-doped fiber laser is demonstrated in this study. The TiO2 polymer composite acts as a light-absorbing material, saturable absorber (SA), showing nonlinear transmission characteristics with 3.8% modulation depth and 17 MW/cm(2) saturation intensity at 1.92 mu m wavelength.

RESULTS IN PHYSICS (2021)

Add to Collection

Review Optics

Recent research and advances of material-based saturable absorber in mode-locked fiber laser

K. Y. Lau et al.

Summary: This paper comprehensively reviews the use of material-based saturable absorbers in mode-locked fiber lasers, discussing advantages and challenges in areas such as material synthesis techniques, characteristics, composite materials, structure design, and deposition techniques. Concrete recommendations are provided to address current issues and challenges, aiming to contribute to further development in this field.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Effects of Calcination Temperature on the Phase Composition, Photocatalytic Degradation, and Virucidal Activities of TiO2 Nanoparticles

Min Gu Kim et al.

Summary: Researchers investigated the synthesis and performance of TiO2 nanoparticles, obtaining mixed brookite/rutile phase TiO2 nanoparticles by adjusting the calcination temperature. The TiO2 nanoparticles calcined at 700 degrees Celsius with mixed anatase/rutile phases showed the best photocatalytic degradation of methylene blue and exhibited excellent virus inactivation against various viruses, indicating their potential for environmental applications.

ACS OMEGA (2021)

Add to Collection

Article Optics

Optical properties of anatase and rutile TiO2 films deposited by using a pulsed laser

Liqi Cui et al.

Summary: Transparent titanium dioxide films were deposited on quartz substrates using a pulsed-laser deposition technique, and the effects of deposition temperatures on the crystalline phases and optical properties of the films were investigated. Phase-pure anatase and rutile TiO2 films were obtained at different temperatures, with differences observed in their nonlinear optical properties.

APPLIED OPTICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Noise-like pulses under different intra-cavity nonlinearity

Chonghao Wu et al.

Summary: The influence of the average nonlinear coefficient on noise-like pulse in a figure-of-eight erbium-doped fiber laser was investigated. Changing the length of highly nonlinear fiber in the nonlinear amplifying loop mirror led to spectral evolutions and a decline in peak power of the noise-like pulse. Moreover, the tuning range of the pulse duration varied depending on the average nonlinear coefficient selected.

OPTICAL FIBER TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Molybdenum trioxide decorated on tapered microfiber for mode-locked erbium-doped fiber laser

N. Mohd Yusoff et al.

Summary: This work presents a simple and cost-effective method to prepare MoO3-SA for ultrashort pulse generation. The fabricated MoO3-SA demonstrated good performance in generating mode-locked pulses in an erbium-doped fiber laser, with a short pulse duration. The use of micrometer-sized materials relaxes the strict requirements for SA fabrication compared to advanced nanomaterials.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Review Engineering, Chemical

Evaluations of physico-chemical properties of TiO2/clinoptilolite synthesized via three methods on photocatalytic degradation of crystal violet

Raza Ullah et al.

Summary: Different preparation routes for TiO2-supported natural and synthetic clinoptilolite composites were investigated, revealing that in-situ hydrothermal method led to well dispersed TiO2 particles on the surface of clinoptilolite, while sol-gel and hydrothermal methods resulted in aggregated TiO2 particles on a relatively distorted structure. TiO2/CPs synthesized via sol-gel and in-situ hydrothermal methods demonstrated excellent performances for the removal of crystal violet dye compared to bare commercial TiO2, with in-situ hydrothermally synthesized TiO2/CPs showing the best energy cost, adsorption capacities and removal efficiencies.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2021)

Add to Collection

Article Optics

Giant dispersive and absorptive optical nonlinearities in TiO2 thin films

Romita Chouhan et al.

JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B-OPTICAL PHYSICS (2020)

Add to Collection

Article Optics

Impact of spectral filtering on pulse breaking-up and noise-like pulse generation in all-normal dispersion fiber lasers

Runqin Xu et al.

OPTICS EXPRESS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Nonlinear Absorbing-Loop Mirror in a Holmium-Doped Fiber Laser

Junqing Zhao et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Recent developments in emerging two-dimensional materials and their applications

Karim Khan et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Tellurene-based saturable absorber to demonstrate large-energy dissipative soliton and noise-like pulse generations

Nannan Xu et al.

NANOPHOTONICS (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Recent progress of pulsed fiber lasers based on transition-metal dichalcogenides and black phosphorus saturable absorbers

Xing Liu et al.

NANOPHOTONICS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Facile synthesis of TiO2/Ag3PO4composites with co-exposed high-energy facets for efficient photodegradation of rhodamine B solution under visible light irradiation

Yi-en Du et al.

RSC ADVANCES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Effects of Different TiO2 Particle Sizes on the Microstructure and Optical Limiting Properties of TiO2/Reduced Graphene Oxide Nanocomposites

Yuyu Ren et al.

NANOMATERIALS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

L-Band Noise-Like Pulse Generation in a Bidirectional Mode-Locked Fiber Laser

Yiyang Luo et al.

IEEE PHOTONICS TECHNOLOGY LETTERS (2018)

Add to Collection

Article Optics

Noise-like pulses generated from a passively mode-locked fiber laser with a WS2 saturable absorber on microfiber

Zhenhong Wang et al.

LASER PHYSICS LETTERS (2018)

Add to Collection

Article Optics

Titanium dioxide doped fiber as a new saturable absorber for generating mode-locked erbium doped fiber laser

P. Harshavardhan Reddy et al.

OPTIK (2018)

Add to Collection

Article Multidisciplinary Sciences

Bismuth Telluride nanocrystal: broadband nonlinear response and its application in ultrafast photonics

Guobao Jiang et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Octave Spanning Supercontinuum in Titanium Dioxide Waveguides

Kamal Hammani et al.

APPLIED SCIENCES-BASEL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis, characterization and investigation of photocatalytic activity of nano-titania from natural ilmenite with graphite for cigarette smoke degradation

Natrah Shafiqah Rosli et al.

RESULTS IN PHYSICS (2018)

Add to Collection

Article Chemistry, Analytical

Hydrogen sensor based on polymer-filled hollow core fiber with Pt-loaded WO3/SiO2 coating

Ben Xu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Structure-property relationships for Eu doped TiO2 thin films grown by a laser assisted technique from colloidal sols

I. Camps et al.

RSC ADVANCES (2017)

Add to Collection

Article Chemistry, Physical

Optical properties of polydimethylsiloxane (PDMS) during nanosecond laser processing

N. E. Stankova et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Engineering, Electrical & Electronic

C-Band Q-Switched Fiber Laser Using Titanium Dioxide (TiO2) As Saturable Absorber

H. Ahmad et al.

IEEE PHOTONICS JOURNAL (2016)

Add to Collection

Review Optics

Ultrafast laser processing of materials: from science to industry

Mangirdas Malinauskas et al.

LIGHT-SCIENCE & APPLICATIONS (2016)

Add to Collection

Article Optics

Simulation of generation of dissipative soliton, dissipative soliton resonance and noise-like pulse in Yb-doped mode-locked fiber lasers

Zhaochen Cheng et al.

OPTICS EXPRESS (2015)

Add to Collection

Article Chemistry, Physical

Nonlinear absorption, nonlinear scattering, and optical limiting properties of MoS2-ZnO composite-based organic glasses

Bin Qu et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

Add to Collection

Article Optics

Numerical study on the minimum modulation depth of a saturable absorber for stable fiber laser mode locking

Jinwoo Jeon et al.

JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B-OPTICAL PHYSICS (2015)

Add to Collection

Article Chemistry, Physical

Raman, mid-infrared, near-infrared and ultraviolet-visible spectroscopy of PDMS silicone rubber for characterization of polymer optical waveguide materials

Dengke Cai et al.

JOURNAL OF MOLECULAR STRUCTURE (2010)

Add to Collection

Article Optics

OPTICAL LIMITING CHARACTERISTICS OF CORE-SHELL NANOPARTICLES

G. Vinitha et al.

JOURNAL OF NONLINEAR OPTICAL PHYSICS & MATERIALS (2010)

Add to Collection

Article Optics

Effect of birefringence on the bandwidth of noise-like pulse in an erbium-doped fiber laser

Dajun Lei et al.

JOURNAL OF MODERN OPTICS (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.