Related references
Note: Only part of the references are listed.Study on microstructure and properties of Fe-based amorphous composite coating by high-speed laser cladding
Ruifeng Li et al.
OPTICS AND LASER TECHNOLOGY (2022)
Evading stress-property tradeoff in a SMA/PZT laser cladding coating via phase transformations
Changyu Liu et al.
SURFACE & COATINGS TECHNOLOGY (2022)
Damage Tolerance Assessment of Laser Clad Repairs of Coarse Grain Ti-6Al-4V
P. F. Gardner et al.
EXPERIMENTAL MECHANICS (2022)
Effects of laser energy density and path on residual stress of remanufactured key components for shield tunneling machine
Yanhai Cheng et al.
MATERIALS CHEMISTRY AND PHYSICS (2022)
Application of a New Alloy and Post Processing Procedures for Laser Cladding Repairs on Hypereutectoid Rail Components
Olivia Kendall et al.
MATERIALS (2022)
Numerical research on effect of overlap ratio on thermal-stress behaviors of the high-speed laser cladding coating*
Xiaoxi Qiao et al.
CHINESE PHYSICS B (2021)
Effects of laser cladding on crack resistance improvement for aluminum alloy used in aircraft skin
Minjie Song et al.
OPTICS AND LASER TECHNOLOGY (2021)
Prediction modelling and process optimization for forming multi-layer cladding structures with laser directed energy deposition
Chenguang Guo et al.
OPTICS AND LASER TECHNOLOGY (2021)
Microstructure characteristics and mechanical properties of a laser cladded Fe-based martensitic stainless steel coating
Weimin Guo et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Thermal Stress Cycle Simulation in Laser Cladding Process of Ni-Based Coating on H13 Steel
Fangping Yao et al.
COATINGS (2021)
Numerical simulation to study the effects of different laser cladding sequences on residual stress and deformation of Ti-6Al-4V/WC
Yu Feng et al.
JOURNAL OF MATERIALS RESEARCH (2021)
Numerical simulations of temperature and stress field of Fe-Mn-Si-Cr-Ni shape memory alloy coating synthesized by laser cladding
Qi Zhang et al.
OPTIK (2021)
Modeling and optimization for laser cladding via multi-objective quantum-behaved particle swarm optimization algorithm
Minyu Ma et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Research on remanufacturing strategy for 45 steel gear using H13 steel powder based on laser cladding technology
Lida Zhu et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Laser cladding technique for erosive wear applications: a review
Sarpreet Singh et al.
MATERIALS RESEARCH EXPRESS (2020)
Residual stress in laser cladded heavy-haul rails investigated by neutron diffraction
Taposh Roy et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Effect of laser beam incidence angle on cladding morphology in laser cladding process
Guan Zhang et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2020)
Multi-physics modeling and Gaussian process regression analysis of cladding track geometry for direct energy deposition
Shuhao Wang et al.
OPTICS AND LASERS IN ENGINEERING (2020)
Effects of stress-induced solid phase transformations on residual stress in laser cladding a Fe-Mn-Si-Cr-Ni alloy coating
Jiayu Tian et al.
MATERIALS & DESIGN (2020)
Study on microstructure and properties of a Fe-based SMA/PZT composite coating produced by laser cladding
Changyu Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Impacts of laser cladding residual stress and material properties of functionally graded layers on titanium alloy sheet
Qian Wang et al.
ADDITIVE MANUFACTURING (2020)
Numerical Evaluation of Advanced Laser Control Strategies Influence on Residual Stresses for Laser Powder Bed Fusion Systems
Massimo Carraturo et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2020)
Optimization of processing parameters in fiber laser cladding
Sayeed Mohammed et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
A novel approach to prevent decarburisation through electroless plating
R. Johari Teymoori et al.
SURFACE ENGINEERING (2019)
Direct laser deposition as repair technology for a low transformation temperature alloy: Microstructure, residual stress, and properties
J. X. Fang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Numerical simulation of thermal and stress field of single track cladding in wide-beam laser cladding
Huaming Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Considering cyclic plasticity to predict residual stresses in laser cladding of Inconel 718 multi bead samples
Mir Siavash Ghorashi et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
A numerical-experimental investigation of heat distribution, stress field and crack susceptibility in Ni60A coatings
Shuting Sun et al.
OPTICS AND LASER TECHNOLOGY (2019)
Residual stress in laser cladded rail
A. Narayanan et al.
TRIBOLOGY INTERNATIONAL (2019)
A numerical investigation for alternative toolpath deposition solutions for surface cladding of stainless steel P420 powder on AISI 1018 steel substrate
Navid Nazemi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Analysis and prediction on geometric characteristics of multi-track overlapping laser cladding
Guofu Lian et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Residual stresses in Stellite 6 layers cladded on AISI 420 steel plates with a Nd:YAG laser
Wei Ya et al.
JOURNAL OF LASER APPLICATIONS (2018)
Effect of cooling rate on residual stress and mechanical properties of laser remelted ceramic coating
Biswajit Das et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Characterization of the microstructures and the shape memory properties of the Fe-Mn-Si-Cr-Ni-C shape memory alloy after severe plastic deformation by differential speed rolling and subsequent annealing
Y. S. Kim et al.
MATERIALS CHARACTERIZATION (2018)
Chemical vapor deposition of TiN on transition metal substrates
L. von Fieandt et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Residual stress and fracture strength of brazed joint of ceramic and titanium alloy with the aid of laser deposited functionally graded material layers
J. M. Shi et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Characteristics of microstructure and stresses and their effects on interfacial fracture behavior for laser-deposited maraging steel
Shaopeng Wei et al.
MATERIALS & DESIGN (2018)
Titanium/hydroxyapatite (Ti/HA) gradient materials with quasi-continuous ratios fabricated by SLM: Material interface and fracture toughness
Changjun Han et al.
MATERIALS & DESIGN (2018)
Effects of Substrate Preheating Temperatures on the Microstructure, Properties, and Residual Stress of 12CrNi2 Prepared by Laser Cladding Deposition Technique
Chenggang Ding et al.
MATERIALS (2018)
Systematic evaluation of process parameter maps for laser cladding and directed energy deposition
Benjamin Bax et al.
ADDITIVE MANUFACTURING (2018)
A physical modeling and predictive simulation of the laser cladding process
Florian Wirth et al.
ADDITIVE MANUFACTURING (2018)
Thermo-mechanical analysis in pulsed laser cladding of WC powder on Inconel 718
Y. Javid et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Influence of α/β interface phase on the tensile properties of laser cladding deposited Ti-6Al-4V titanium alloy
Zhuang Zhao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)
Microstructural characteristics and formation mechanism of laser cladding of titanium alloys on carbon fiber reinforced thermoplastics
Xuan Su et al.
MATERIALS LETTERS (2017)
Chlorine-induced high temperature corrosion of Inconel 625 sprayed coatings deposited with different thermal spray techniques
Davide Fantozzi et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Effect of Ti on T15M composite coating fabricated by laser cladding technology
Xiangyi Jiao et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Fatigue behavior of a Fe-Mn-Si shape memory alloy used for prestressed strengthening
E. Ghafoori et al.
MATERIALS & DESIGN (2017)
Laser Powder Cladding of Ti-6Al-4V / Alloy
Samar Reda Al-Sayed Ali et al.
MATERIALS (2017)
Residual stress measurements on AISI 316L samples manufactured by selective laser melting
Thomas Simson et al.
ADDITIVE MANUFACTURING (2017)
An assessment of residual stress mitigation strategies for laser clad deposits
A. Martinez Hurtado et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Analysis and optimization of process parameters in Al-SiCp laser cladding
Ainhoa Riquelme et al.
OPTICS AND LASERS IN ENGINEERING (2016)
Developments in laser-based surface engineering processes: with particular reference to protection against cavitation erosion
C. T. Kwok et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Thermo-mechanical model for simulating laser cladding induced residual stresses with single and multiple clad beads
Youxiang Chew et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Experimental characterization of laser cladding of CPM 9V on H13 tool steel for die repair applications
Prakash Kattire et al.
JOURNAL OF MANUFACTURING PROCESSES (2015)
In-situ synthesis of Fe-Mn-Si-Cr-Ni shape memory alloy functional coating by laser cladding
Peng Xu et al.
CHINESE OPTICS LETTERS (2014)
Laser cladding with scanning optics: Effect of scanning frequency and laser beam power density on cladding process
Joonas Pekkarinen et al.
JOURNAL OF LASER APPLICATIONS (2014)
Microstructure and properties of laser cladding FeCrBSi composite powder coatings with higher Cr content
Yibo Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
The role of microstructure in the stress relaxation and tempering of laser clad Ti-6Al-4V
R. Cottam et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Laser cladding with scanning optics: Effect of scanning frequency and laser beam power density on cladding process
Joonas Pekkarinen et al.
JOURNAL OF LASER APPLICATIONS (2014)
Growth characteristics and mechanism of carbides precipitated in WC-Fe composite coatings by laser induction hybrid rapid cladding
Shengfeng Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Cyclic Corrosion Behavior of Pt/Ru-Modified Bond Coatings Exposed to NaCl Plus Water Vapor at 1050°C
Yingxue Song et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2010)
Effect of laser cladding process parameters on clad quality and in-situ formed microstructure of Fe-TiC composite coatings
Ali Emamian et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Effects of process variables on interfacial quality of laser cladding on aeroengine blade material GH4133
Zheng Xiong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization
Shengfeng Zhou et al.
APPLIED SURFACE SCIENCE (2008)
Modulation of power density distribution in time and space for high speed laser cladding
K. Partes et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Modeling the influence of process parameters and additional heat sources on residual stresses in laser cladding
F. Brueckner et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2007)
Deposition pattern based thermal stresses in single-layer laser aided direct material deposition process
S. Ghosh et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2007)
Three-dimensional transient finite element analysis for residual stresses in the laser aided direct metal/material deposition process
S Ghosh et al.
JOURNAL OF LASER APPLICATIONS (2005)
Repairing of sintered tools using laser cladding by wire
E Capello et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Share Paper
