☆ 4.7 Article

Tool wear prediction in milling CFRP with different fiber orientations based on multi-channel 1DCNN-LSTM

JOURNAL OF INTELLIGENT MANUFACTURING (2023)

Related references

Note: Only part of the references are listed.

Article Computer Science, Artificial Intelligence

An approach for tool wear prediction using customized DenseNet and GRU integrated model based on multi-sensor feature fusion

Xianli Liu et al.

Summary: Accurately predicting the machining tool condition during the cutting process is crucial for improving tool life, production quality, productivity, labor and maintenance costs, and reducing workplace accidents. This study proposes an integrated prediction scheme based on deep learning algorithms to address the critical challenge of extracting and fusing feature and fusion information from multi-sensor signals related to tool wear. The results show that the proposed model outperforms other tool wear prediction models in terms of both accuracy and generalization.

JOURNAL OF INTELLIGENT MANUFACTURING (2023)

Add to Collection

Article Engineering, Manufacturing

A novel predict-prevention quality control method of multi-stage manufacturing process towards zero defect manufacturing

Li-Ping Zhao et al.

Summary: This study proposes a novel predict-prevention quality control method for zero defection manufacturing (ZDM) in multi-stage manufacturing processes (MMP). The method includes quality characteristics monitoring, key quality characteristics prediction, and assembly quality optimization. By analyzing the distribution and considering the correlations between different quality characteristics, a deep supervised long-short term memory (SLSTM) prediction network is built for time series prediction, and a long-short term memory-genetic algorithm (LSTM-GA) network is proposed to optimize the assembly quality. Empirical evaluations on compressors' MMP validate the applicability and practicability of the proposed method.

ADVANCES IN MANUFACTURING (2023)

Add to Collection

Article Computer Science, Artificial Intelligence

Cross-domain adaptation network based on attention mechanism for tool wear prediction

Jianliang He et al.

Summary: On-machine monitoring of tool wear is crucial for improving machining efficiency and reducing cost. However, the complex data distribution and feature representation pose challenges. This paper proposes a novel model called CDATT, which utilizes data filtering, attention mechanism, and joint distribution adaptation regularization to enhance cross-domain tool wear prediction performance.

JOURNAL OF INTELLIGENT MANUFACTURING (2023)

Add to Collection

Article Engineering, Manufacturing

Multiconditional machining process quality prediction using deep transfer learning network

Bo-Hao Li et al.

Summary: The quality prediction of machining processes is crucial for maintaining stability and improving component quality. In this study, a new multiconditional machining quality prediction model based on a deep transfer learning network is proposed. It employs a deep convolutional neural network to investigate the connections between process signals and quality, and uses transfer strategies to apply the trained network to target operating conditions. Experimental results demonstrate that the proposed method achieves improved prediction accuracy under different conditions compared to other data-driven methods.

ADVANCES IN MANUFACTURING (2023)

Add to Collection

Article Engineering, Mechanical

Effects of tool coating and tool wear on the surface quality and flexural strength of slotted CFRP

Sam Ashworth et al.

Summary: This research investigates the impact of tool wear on the static flexural strength of carbon fibre reinforced polymer (CFRP) machining. The study finds that the cutting mechanism changes and the surface metrics degrade for an uncoated tool, while the coated tool shows limited changes within a certain range. Tool wear during edge trimming of CFRP using an uncoated carbide tool directly results in a reduction in flexural strength.

WEAR (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

Relating wear stages in sheet metal forming based on short- and long-term force signal variations

Philipp Niemietz et al.

Summary: This study examines the relationship between changes in force data and wear in sheet metal forming processes, using sensors to detect auxiliary quantities to understand physical quantities in the forming or stamping process. The research aims to fill current research gaps by quantifying the evolution of wear in industry-like scenarios.

JOURNAL OF INTELLIGENT MANUFACTURING (2022)

Add to Collection

Article Engineering, Manufacturing

Tool wear prediction in edge trimming of carbon fiber reinforced polymer using machine learning with instantaneous parameters

Fan Jin et al.

Summary: A hybrid method combining machine learning technique and physics-based kinematics model for predicting tool wear during CFRP edge trimming is proposed in this paper. By transferring training data, the feature parameters from UD CFRP are successfully applied to predict tool wear in MD CFRP, reducing experimental costs effectively.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Engineering, Mechanical

Failure time prognosis in manufacturing process using multi-dislocated time series convolutional neural network

Bohao Li et al.

Summary: The study introduces a novel prediction framework called MDTSCNN based on multisensory signals, utilizing a multi-dislocate layer to learn the relationships between different signals and intervals in periodic multisensory signals, thereby showing improved performance in prediction accuracy compared to other methods.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Manufacturing

The effects of cutting conditions and tool geometry on mechanics, tool wear and machined surface integrity when routing CFRP composites

Chunliang Kuo et al.

Summary: This study investigated the effects of different cutting methods on CFRP composite materials, analyzed the impact of cutting conditions on machined surface quality, and compared the performance of different tool geometries in terms of tool life and surface finish.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Mechanics

Chatter stability and surface quality in milling of unidirectional carbon fiber reinforced polymer

Yao Hou et al.

Summary: This paper establishes a mechanical cutting force model and dynamic milling system model considering the anisotropy of CFRP materials, discussing the influence of fiber direction on machining stability and surface quality. It provides a novel method for predicting surface quality of machined CFRP by defining a variable related to cutting stability.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Automation & Control Systems

A New Multitask Learning Method for Tool Wear Condition and Part Surface Quality Prediction

Yongqing Wang et al.

Summary: The article introduces a multitask learning method based on deep belief networks for predicting tool wear and part surface quality. Experimental results show that the proposed method can improve prediction accuracy and reduce computing time.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)

Add to Collection

Article Automation & Control Systems

Tool wear and spring back analysis in orthogonal machining unidirectional CFRP with respect to tool geometry and fibre orientation

Lukas Seeholzer et al.

Summary: Machining abrasive carbon fibre reinforced polymers involves extensive mechanical wear on cutting tools. This study focuses on analyzing the tool wear behavior and influencing factors, with experiments showing that wear varies significantly along the tool's contact region and is highly dependent on fiber cutting angles and clearance angles. The study highlights the importance of understanding tool wear for improving cutting tool performance and longevity.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

A novel method for predicting delamination of carbon fiber reinforced plastic (CFRP) based on multi-sensor data

Jiacheng Cui et al.

Summary: A comprehensive delamination prediction method based on multi-sensor data was proposed in this paper to predict delamination damage in real-time during the continuous drilling process of CFRP components. The method showed significant improvements in prediction accuracy and effectiveness compared to traditional evaluation factors and machine learning models, reducing mean square error by more than 50% and 39% respectively.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

Research on tool wear prediction based on temperature signals and deep learning

Zhaopeng He et al.

Summary: Tool condition monitoring is crucial for efficient tool life utilization, production improvement, and cost reduction. A deep learning method using temperature signals was proposed to predict tool wear accurately. The experimental results showed that the proposed model outperformed traditional methods in terms of prediction accuracy and stability.

WEAR (2021)

Add to Collection

Article Engineering, Mechanical

A semi-analytical model for predicting tool wear progression in drilling CFRP

Yu Bai et al.

Summary: In this paper, a semi-analytical model is established to predict tool wear progression in CFRP drilling, combining fundamental cutting interactions analysis and regression analysis, and describing and evaluating tool wear based on wear rate and average half axis lengths.

WEAR (2021)

Add to Collection

Article Automation & Control Systems

High-speed milling of CFRP composites: a progressive damage model of cutting force

Lifeng Zhang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

A hybrid information model based on long short-term memory network for tool condition monitoring

Weili Cai et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2020)

Add to Collection

Article Engineering, Mechanical

The effect of fiber orientation on tool wear in edge-trimming of carbon fiber reinforced plastics (CFRP) laminates

Dinh Nguyen et al.

WEAR (2020)

Add to Collection

Article Engineering, Industrial

A new cyber-physical adaptive control system for drilling of hybrid stacks

A. Sadek et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Automation & Control Systems

A smart tool wear prediction model in drilling of woven composites

H. Hegab et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Engineering, Industrial

Analytical force model for orthogonal machining of unidirectional carbon fibre reinforced polymers (CFRP) as a function of the fibre orientation

Robert Voss et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

Add to Collection

Article Engineering, Industrial

Machine learning approach based on fractal analysis for optimal tool life exploitation in CFRP composite drilling for aeronautical assembly

Alessandra Caggiano et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)

Add to Collection

Article Computer Science, Artificial Intelligence

Parametric appraisal and optimization in machining of CFRP composites by using TLBO (teaching-learning based optimization algorithm)

Kumar Abhishek et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2017)

Add to Collection

Article Engineering, Manufacturing

Machinability characteristics evolution of CFRP in a continuum of fiber orientation angles

Changying Wang et al.

MATERIALS AND MANUFACTURING PROCESSES (2017)

Add to Collection

Article Automation & Control Systems

The cutting force and defect analysis in milling of carbon fiber-reinforced polymer (CFRP) composite

Yanli He et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Computer Science, Artificial Intelligence

Process control based on pattern recognition for routing carbon fiber reinforced polymer

Yasser Shaban et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2017)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Study on Tool Wear during Milling CFRP under Dry and Chilled Air Machining

M. K. Nor Khairusshima et al.

ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE (2017)

Add to Collection

Article Engineering, Manufacturing

Influence of fibre orientation, tool geometry and process parameters on surface quality in milling of CFRP

Robert Voss et al.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Engineering, Multidisciplinary

Occurrence and formation mechanism of surface cavity defects during orthogonal milling of CFRP laminates

Changying Wang et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Article Engineering, Manufacturing

Comparison of two models for predicting tool wear and cutting force components during high speed trimming of CFRP

Mohamed Slamani et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2015)

Add to Collection

Article Engineering, Industrial

High-quality machining of CFRP with high helix end mill

Akira Hosokawa et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)

Add to Collection

Article Automation & Control Systems

Tool wear prediction models during end milling of glass fibre-reinforced polymer composites

A. I. Azmi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.