☆ 4.5 Article

Synthesis, Characterization and Mechanical Properties of Poly (vinyl acetate)/Boehmite Nanocomposites via Emulsion Polymerization

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Tailoring the structural, electrical and thermal properties of zinc oxide reinforced chlorinated natural rubber/poly (indole) blend nanocomposites for flexible electrochemical devices

K. Parvathi et al.

Summary: Elastomer nanocomposites based on chlorinated natural rubber/polyindole blend with different loadings of zinc oxide nanoparticles were studied for their structural, morphological, thermal and electrical properties. The uniform dispersion of ZnO nanoparticles in the blend system was confirmed by UV-Vis spectra. Chemical interaction between ZnO and the blend was observed from additional band in the FT-IR spectra. The XRD, FE-SEM, and HR-TEM images confirmed the uniform dispersion of ZnO in the blend. The addition of ZnO improved the thermal stability, glass transition temperature, electrical conductivity, and tensile properties of the blend nanocomposites. The composites with 5 wt.% ZnO loading showed maximum dielectric constant and AC conductivity, suggesting optimal interfacial contact.

JOURNAL OF POLYMER RESEARCH (2023)

Add to Collection

Article Polymer Science

Synthesis and characterization of starch stabilized polyvinyl acetate-acrylic acid copolymer-based wood adhesive

Ravindra V. Gadhave et al.

Summary: This study investigated the emulsion polymerization of acrylic acid (AA) as a co-monomer in starch stabilized polyvinyl acetate (PVAc) based wood adhesives. The addition of AA resulted in improved water resistance, mechanical properties, and stability of the adhesive.

POLYMER BULLETIN (2023)

Add to Collection

Article Materials Science, Composites

Development of high-performance biopolymer nanocomposites derived from carboxymethyl chitosan/boehmite via green synthesis

K. Meera et al.

Summary: Biopolymer nanocomposites derived from carboxymethyl chitosan and boehmite were prepared via an environmentally friendly method. The nanocomposites showed improved thermal, mechanical, electric, and dielectric properties, making them a potential green alternative for flexible electronic and charge storage devices.

POLYMER COMPOSITES (2023)

Add to Collection

Article Engineering, Environmental

Performance of Boehmite Nanoparticles Reinforced Carboxymethyl Chitosan/Polyvinyl Alcohol Blend Nanocomposites Tailored Through Green Synthesis

K. Meera et al.

Summary: In this study, a biopolymer blend of carboxymethyl chitosan (CMCS) and polyvinyl alcohol (PVA) reinforced with boehmite nanoparticles (AlOOH) was prepared using a green method. The addition of nanoparticles significantly improved the thermal stability, glass transition temperature, melting temperature, conductivity, and dielectric properties of the blend nanocomposite films. The tensile strength and hardness were also enhanced while the elongation at break decreased. These improved properties make the blend nanocomposite films suitable for flexible electronic and charge storage devices.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2023)

Add to Collection

Article Polymer Science

The Dielectric Properties and Thermal Conductivities of Epoxy Composites Reinforced by Titanium Dioxide

Yuan Jia et al.

Summary: S-TiO2 with microspheres structure was prepared via hydrothermal process and used as a modifier in EP resin to improve dielectric properties and thermal conductivities of S-TiO2/EP composites. The reasonable content of S-TiO2 enhanced the dielectric constant without excessive increase in dielectric loss, while also improving the thermal conductivity of the composites.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2022)

Add to Collection

Article Polymer Science

Robust magneto-rheological elastomers performance for composites based on iron oxide and carbon black in silicone rubber

Vineet Kumar et al.

Summary: In this study, magneto-rheological elastomers (MREs) based on iron oxide and carbon black were prepared, and the influence of magnetic field on their mechanical performance was investigated. The hybrid composites showed higher mechanical properties compared to pure carbon black or iron oxide, but also suffered from higher heat build-up losses. Improving stress transfer in the composite is a future research direction to overcome these issues.

JOURNAL OF POLYMER RESEARCH (2022)

Add to Collection

Article Engineering, Environmental

Effect of the Fe2O3/TiO2 Nanoparticles on the Structural, Mechanical, Electrical Properties and Antibacterial Activity of the Biodegradable Chitosan/Polyvinyl Alcohol Blend for Food Packaging

Haifa Mohammed Alghamdi et al.

Summary: With the increasing demand for ready-made food, the development of effective antimicrobial food packaging materials is crucial. In this study, a chitosan/polyvinyl alcohol blend based active food packaging material was enhanced by Fe2O3/TiO2 nanoparticles. The results showed that the addition of nanoparticles improved the conductivity and mechanical properties of the material, and exhibited good antibacterial activity.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2022)

Add to Collection

Article Materials Science, Composites

Composite for insole shoe assembly based on polyvinyl acetate and polyester fabric waste from the footwear industry

Tabata Morgana Conti et al.

Summary: This study aimed to investigate the utilization of polyester fabric waste (PFW) from the footwear industry for the production of composite material for shoe assembly insoles. The composites with 5% and 10% PFW showed satisfactory results in all tests, meeting all specifications.

POLYMER COMPOSITES (2022)

Add to Collection

Article Polymer Science

Structure, properties, and antibacterial behavior of nickel oxide reinforced natural rubber nanocomposites for flexible electronic applications

K. Parvathi et al.

Summary: In this study, NiO nanoparticles were inserted into NR to improve its properties. The results showed that the thermal stability and mechanical properties of the nanocomposites were significantly enhanced.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Review Polymer Science

Applications of Spectroscopic Techniques for Characterization of Polymer Nanocomposite: A Review

Maryam Batool et al.

Summary: This review summarizes the knowledge of existing characterization practices and explores the applications of fluorescence, UV-Vis spectroscopy, solid-state NMR, WXRD, SAXS, and infrared spectroscopy along with Raman technique in the characterization of metal oxide composites, polymers, fillers, composites, and nanocomposites.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2022)

Add to Collection

Article Polymer Science

Zinc oxide reinforced poly(para-aminophenol) nanocomposites: Structural, thermal stability, conductivity and ammonia gas sensing applications

Furhan et al.

Summary: Conducting polymer nanocomposites based on PpAP with various concentrations of ZnO nanoparticles were synthesized and characterized. The presence of interfacial interactions between ZnO and PpAP was confirmed, with uniformly distributed nanoparticles in the polymer matrix. The composites exhibited improved thermal stability and dielectric properties compared to the parent polymer, and showed optimal gas sensing performance at a nanoparticle concentration of 7 wt.%.

JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Optical and electrical properties of copper alumina nanoparticles reinforced chlorinated polyethylene composites for optoelectronic devices

S. Suvarna et al.

Summary: This study focused on the optical, thermal, electrical, and dielectric properties of chlorinated polyethylene/copper alumina (CPE/Cu-Al2O3) nanocomposites. The incorporation of Cu-Al2O3 nanoparticles into the CPE matrix improved the properties of the nanocomposites. 7 wt% Cu-Al2O3 loaded sample exhibited the best performance.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2022)

Add to Collection

Article Thermodynamics

Thermal, optical and temperature-dependent electrical properties of poly(aniline-co-pyrrole)/copper alumina nanocomposites for optoelectronic devices

S. Sankar et al.

Summary: This article investigates the effect of Cu-Al2O3 reinforcement on the structural, thermal, and temperature-dependent AC parameters of PANI-co-PPy composites. The study finds that the addition of Cu-Al2O3 enhances the conductivity and dielectric properties of the composites, making them suitable for durable electronic devices.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Add to Collection

Article Engineering, Chemical

High performance optical and electrical properties of zinc oxide reinforced poly(diphenylamine) nanocomposites for optoelectronic applications

Furhan et al.

Summary: Polymer nanocomposites with good properties were synthesized by incorporating zinc oxide nanoparticles into a poly(diphenylamine) matrix. The addition of nanoparticles improved the optical, crystalline, morphological, thermal, dielectric, and electrical properties of the nanocomposites.

POLYMER ENGINEERING AND SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Temperature-dependent conductivity, optical properties, thermal stability and dielectric modelling studies of Cu-Al2O3/CPE/PVC blend nanocomposites

S. Suvarna et al.

Summary: The optical, thermal, crystalline, conductivity and dielectric properties of chlorinated polyethylene/poly (vinyl chloride) (CPE/PVC) blend composites with various loadings of copper alumina (Cu-Al2O3) nanoparticles were investigated in this study. The experiment results showed that the addition of Cu-Al2O3 nanoparticles successfully enhanced the properties of the blend, resulting in improved thermal stability and conductivity.

BULLETIN OF MATERIALS SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Application of Polyvinyl Acetate/Lignin Copolymer as Bio-Based Coating Material and Its Effects on Paper Properties

Nana Zhang et al.

Summary: The study demonstrates the successful synthesis of lignin-vinyl acetate copolymers for coating paper, leading to enhancements in physical and chemical properties, air permeability, and mechanical strength. Increasing lignin content in the copolymer results in further improvements in coated paper properties, showing potential applications in packaging.

COATINGS (2021)

Add to Collection

Article Polymer Science

Biodegradable hot melt adhesive based on partially saponified polyvinyl acetate/cellulose diacetate blend

Yong-Ho Kim et al.

Summary: Recycling polymer materials from waste reduces the cost of biodegradable hot melt adhesives and addresses environmental issues. Results show that including cellulose diacetate in the blends can decrease the cost of partially saponified polyvinyl acetate-based hot melt adhesive while improving adhesive strength.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Polymer Science

Significant Enhanced Optical Parameters of PVA-Y2O3 Polymer Nanocomposite Films

Z. A. Alrowaili et al.

Summary: The PVA-Y2O3 nanocomposite films prepared in the study showed good structure and uniform distribution of Y2O3 nanoparticles, with optical properties changing with the increase of Y2O3 content.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2021)

Add to Collection

Article Electrochemistry

Effect of aluminum reinforcement on the structural, physicochemical, and electrochemical properties of polyaniline-derived polymer/aluminum composites by in situ polymerization

Feridun Demir

Summary: This study investigated the properties of polyaniline-derived polymer/pristine aluminum composites, focusing on the conductivity and electrochemical energy storage effects of Al particles as reinforcing elements. SEM and FTIR results showed the successful synthesis of the polymer, with Al particles embedded in the polymer matrix. However, the inclusion of Al particles in the matrix led to decreased conductivity due to the formation of a protective oxide film layer on the aluminum surface. Electrochemical characterizations revealed that composites with different aluminum content did not exhibit good supercapacitor properties compared to pure polyaniline, as the Al particles did not effectively interact with the polymer matrix. Hence, the composites showed higher corrosion protection effectiveness due to the presence of a stable oxide film layer on the aluminum surface.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis of the SWCNTs/TiO2 nanostructure and its effect study on the thermal, optical, and conductivity properties of the CMC/PEO blend

Qana A. Alsulami et al.

Summary: TiO2 NPs were successfully synthesized using the sol-gel method, and SWCNTs/TiO2 nanostructures were fabricated through a simple mixing technique. The influence of SWCNTs/TiO2 loading on the properties of polymer blend films was discussed, showing improvements in optical, thermal, and AC conductivity with increased doping. Interaction between CMC/PEO chains and SWCNTs/TiO2 nanohybrid was confirmed, and changes in crystallinity and conduction mechanisms were observed with doping.

RESULTS IN PHYSICS (2021)

Add to Collection

Article Polymer Science

In situ emulsion polymerization and characterization of PVAc nanocomposites including colloidal silica nanoparticles for wood specimens bonding

Mehrdad Azamian Jazi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Add to Collection

Article Polymer Science

Multifunctional Applications of Graphene-Doped PMMA Nanocomposite Membranes for Environmental Photocatalytic

Mai S. A. Hussien et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2020)

Add to Collection

Article Thermodynamics

Thermal analysis: an effective characterization method of polyvinyl acetate films applied in corrosion inhibition field

Adriana Samide et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection

Article Optics

Synthesis of polyvinyl acetate /graphene nanocomposite and its application as an electrolyte in dye sensitized solar cells

Shafi Ur Rehman et al.

OPTIK (2020)

Add to Collection

Article Polymer Science

Synthesis of Polyacrylate-Styrene/Nanotitanium Dioxide Composite Particles via Miniemulsi on Polymerization with Surfmer

Jihang Li et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2020)

Add to Collection

Article Polymer Science

Acid-Assisted One-Step In-Situ Polymerization Synthesis of PANI/α-Fe2O3/β-FeOOH Composites and Its Formation Mechanism

Runhua Qin et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

A facile sol-gel synthesis of chitosan-boehmite film with excellent acid resistance and adsorption performance for Pb(II)

Yiting Chen et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2020)

Add to Collection

Article Polymer Science

Preparation and Properties of Silver-Based Cellulose/Polyvinyl Alcohol Antibacterial Materials

Zhaoqi Wang et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2020)

Add to Collection

Review Polymer Science

Polymer/boehmite nanocomposites: A review

Jozsef Karger-Kocsis et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Facile synthesis and characterization of gamma-AlOOH/PVA composite granules for Cr(VI) adsorption

The Ky Vo et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2018)

Add to Collection

Article Chemistry, Applied

Effects of nano-TiO2 on bonding performance, structure stability and film-forming properties of starch-g-VAc based wood adhesive

Lei Chen et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Polymer Science

Synthesis, Structural, Optical, Electrical and Thermal Studies of Poly(vinyl alcohol)/CdO Nanocomposite Films

J. Selvi et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2017)

Add to Collection

Article Chemistry, Applied

Cellulose nanofibrils/polyvinyl acetate nanocomposite adhesives with improved mechanical properties

Ons Chaabouni et al.

CARBOHYDRATE POLYMERS (2017)

Add to Collection

Article Engineering, Chemical

Effects of adding nano-clay (montmorillonite) on performance of polyvinyl acetate (PVAc) and urea-formaldehyde (UF) adhesives in Carapa guianensis, a tropical species

Roger Moya et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2015)

Add to Collection

Article Thermodynamics

Effects of inorganic nanofillers on the thermal degradation and UV-absorbance properties of polyvinyl acetate

Manoj Kumar Pal et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Optical and dielectric properties of poly(vinylacetate)/lead oxide composites

M. Abdelaziz

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2012)

Add to Collection

Article Chemistry, Physical

Influence of filler type on wet skid resistance of SSBR/BR composites: Effects from roughness and micro-hardness of rubber surface

Yuan-Xia Wang et al.

APPLIED SURFACE SCIENCE (2011)

Add to Collection

Article Engineering, Manufacturing

Tensile behavior, morphology and viscoelastic analysis of cellulose nanofiber-reinforced (CNF) polyvinyl acetate (PVAc)

Guan Gong et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

Add to Collection

Article Materials Science, Paper & Wood

Sisal cellulose whiskers reinforced polyvinyl acetate nanocomposites

Nancy Lis Garcia de Rodriguez et al.

CELLULOSE (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.