☆ 4.5 Article

Strain-rate and stress-state dependent ductile fracture model of S690 high-strength steel

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2023)

Related references

Note: Only part of the references are listed.

Article Mechanics

Simulation of ductile tearing during a full size test using a non local Gurson-Tvergaard-Needleman (GTN) model

Youbin Chen et al.

Summary: This study experimentally investigates the ductile tearing behavior of a full size precracked pipe. The pipe material is characterized using smooth and notched tensile bars and precracked C(T) specimens, and a non-local GTN model is used in finite element simulations to successfully represent the early stages of crack propagation in the pipe.

ENGINEERING FRACTURE MECHANICS (2022)

Add to Collection

Article Construction & Building Technology

Fracture prediction in transverse fillet welded joints of high strength structural steel

Ming-Ming Ran et al.

Summary: This study investigates the mechanical behavior and failure modes of fillet welded joints of high strength structural (HSS) steels through numerical simulations. The influences of triaxial stress states on fracture ductility of weld metals are examined, and the accuracy of different fracture models is compared. The numerical simulations with calibrated ductile fracture models successfully capture the load-displacement behavior and failure modes of the transverse fillet welds.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2022)

Add to Collection

Article Mechanics

Strain rate dependent plasticity and fracture of DP1000 steel under proportional and non-proportional loading

Sarath Chandran et al.

Summary: The research evaluated the influence of stress state and strain rate on fracture and damage of DP1000 steel with fine microstructure through extensive testing. Results showed a two-stage strain rate sensitivity of strength in the steel, with a significant impact of stress triaxiality on fracture behavior, particularly at intermediate strain rates.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2022)

Add to Collection

Article Construction & Building Technology

A continuous dynamic constitutive model for normal- and high-strength structural steels

Xiaoqiang Yang et al.

Summary: The use of numerical models in the advanced analysis and design of steel structures, particularly under extreme loading conditions, is becoming more common. This paper presents a systematic study on the dynamic constitutive modeling of structural steels, including the effects of strain rate on stress-strain characteristics. Experimental tests were conducted to establish a database of dynamic test results, and a continuous dynamic constitutive model was proposed to predict the dynamic stress-strain response of structural steels at different strain rates.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Fracture behavior of Grade 10.9 high-strength bolts and T-stub connections in fire

Yaoliang Lu et al.

Summary: This study investigates the influence of stress triaxiality and heating history on the mechanical and fracture properties of high-strength bolts during a fire. The results show that the material properties and fracture performance of the bolts are greatly affected by the maximum and target temperatures.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Fracture analysis of high-strength steel beam-column connections with initial defects

Fangfang Liao et al.

Summary: Finite element models were established to predict the ductile fracture of beam-column connections with initial defects, and J-integral, VGM, and SMCS model were used for fracture prediction. The results showed that initial defect location, length, notch radius, and weld access hole form had influences on fracture index. This study provided theoretical support for predicting the fracture of beam-column connections.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Dynamic Hardening Behavior and Ductile Fracture of High-Strength Steel at Intermediate Strain Rates

Junhong Dong et al.

Summary: This paper investigates the effect of strain rate on the hardening behavior and ductile fracture of high-strength steel Q690, and develops a novel dynamic isotropic hardening law.

JOURNAL OF STRUCTURAL ENGINEERING (2022)

Add to Collection

Article Mechanics

Ductile fracture prediction of additive manufactured Ti6Al4V alloy based on an extended GTN damage model

Xuan Yang et al.

Summary: Research has shown that the modified GTN model with dual damage variables can effectively describe the fracture behavior of SLM-fabricated Ti6Al4V alloy under complex stress states. By introducing a stress state-dependent function, the model's application has been extended, and a finite element based inverse analysis strategy has been proposed for parameter calibration.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Construction & Building Technology

Fracture investigation of different welded steel beam-column connections under three-point bending test

Ibrahim Yelek et al.

Summary: Steel structures are often preferred in construction for their lightweight and durability. However, challenges arise in connecting steel structures due to mechanical imperfections caused by secondary processes such as welding. This study examined the performance of different column-beam connections welded using HEB120 profile under extreme loads, gathering data through tests and fractographic examination.Finite element analysis was also conducted to investigate fracture behavior, with materials modeled for elasto-plastic behavior and stress-strain curves extended using Swift-Voce hardening law.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

Add to Collection

Article Engineering, Mechanical

An improved shear modified GTN model for ductile fracture of aluminium alloys under different stress states and its parameters identification

Zao He et al.

Summary: The study proposed an improved shear modified GTN model for predicting ductile fracture of materials under different stress states, and validated the accuracy of the model and feasibility of the damage parameters identification method through FE analysis.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Engineering, Civil

Experimental and numerical studies of S960 ultra-high strength steel welded I-section columns

Andi Su et al.

Summary: This paper presents a comprehensive study on the structural behavior and resistances of 5960 ultra-high strength steel welded I-section columns failing by flexural buckling about the minor principal axis. The study includes experimental tests, numerical modeling, and an assessment of existing design codes, revealing that the design buckling curve in the American specification provides accurate resistance predictions for these columns. Furthermore, a revised Eurocode design buckling curve is proposed for more accurate predictions.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

The modified GTN-Thomason criterion for modelling of ductile fracture considering shear factor and size effect in micro-scaled plastic deformation

W. T. Li et al.

Summary: Coarse grains result in fewer voids on fracture surfaces and higher flow strength, while finer grains accelerate the occurrence of shear-dominated fracture and hinder normal tensile fracture. By introducing shear factor and size effect, the modified GTN-Thomason criterion predicts ductile fracture in micro-scaled plastic deformation and enhances understanding and prediction of ductile fracture.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Engineering, Civil

Ductile fracture of high strength steel under multi-axial loading

Yuan-Zuo Wang et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Construction & Building Technology

Dynamic tensile behavior of S690 high-strength structural steel at intermediate strain rates

Xiaoqiang Yang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Add to Collection

Article Engineering, Civil

Material properties and membrane residual stresses of S690 high strength steel welded I-sections after exposure to elevated temperatures

Andi Su et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Engineering, Civil

Tests of cold-formed normal and high strength steel tubes under tension

Man-Tai Chen et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic Mechanical Behavior and Constitutive Models of S890 High-Strength Steel at Intermediate and High Strain Rates

Yong Zhu et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

Add to Collection

Article Construction & Building Technology

Tensile Tests of Cold-Formed Stainless Steel Tubes

Man-Tai Chen et al.

JOURNAL OF STRUCTURAL ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Strain-rate effects on S690QL high strength steel under tensile loading

Ezio Cadoni et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Development of an improved MMC-based fracture criterion characterizing the anisotropic and strain rate-dependent behavior of 6061-T5 aluminum alloy

Cheng Ji et al.

MECHANICS OF MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Rate-dependent constitutive models of S690 high-strength structural steel

Xiaoqiang Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Engineering, Civil

Modelling tensile tests on high strength S690 steel materials undergoing large deformations

H. C. Ho et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Mechanical behaviour of a very-high strength steel (S960QL) under extreme conditions of high strain rates and elevated temperatures

Ezio Cadoni et al.

FIRE SAFETY JOURNAL (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Strain-Rate Effect and Constitutive Models for Q550 High-Strength Structural Steel

Hua Yang et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical investigation of ductile fracture using GTN damage model on in-situ tensile tests

H. Gholipour et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Engineering, Mechanical

Fracture of high-strength armor steel under impact loading

Teresa Fras et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Stress-state and strain-rate dependent ductile fracture of dual and complex phase steel

Borja Erice et al.

MECHANICS OF MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Tensile behaviour of S690QL and S960QL under high strain rate

A. A. Alabi et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

Constitutive Model of Q345 Steel at Different Intermediate Strain Rates

Junling Chen et al.

INTERNATIONAL JOURNAL OF STEEL STRUCTURES (2017)

Add to Collection

Article Construction & Building Technology

Experiment research on rate-dependent constitutive model of Q420 steel

Junling Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Stress-strain curves for hot-rolled steels

Xiang Yun et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)

Add to Collection

Article Engineering, Civil

Strain rate behaviour in tension of 5355 steel: Base for progressive collapse analysis

Daniele Forni et al.

ENGINEERING STRUCTURES (2016)

Add to Collection

Article Materials Science, Multidisciplinary

High strain rate response of S355 at high temperatures

Daniele Forni et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Mechanics

A new model for upper shelf impact toughness assessment with a computationally efficient parameter identification algorithm

Denis Novokshanov et al.

ENGINEERING FRACTURE MECHANICS (2015)

Add to Collection

Article Mechanics

Ductile fracture of aluminum 2024-T351 under proportional and non-proportional multi-axial loading: Bao-Wierzbicki results revisited

Jessica Papasidero et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Add to Collection

Article Mechanics

Micromechanically-motivated phenomenological Hosford-Coulomb model for predicting ductile fracture initiation at low stress triaxialities

Dirk Mohr et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Add to Collection

Article Construction & Building Technology

Simulation of ductile fracture in welded tubular connections using a simplified damage plasticity model considering the effect of stress triaxiality and Lode angle

Xinxu Ma et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2015)

Add to Collection

Article Engineering, Mechanical

Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

Add to Collection

Article Engineering, Mechanical

Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets: Experiments and modeling

Christian C. Roth et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

A hybrid approach for modelling of plasticity and failure behaviour of advanced high-strength steel sheets

J. Lian et al.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Application of extended Mohr-Coulomb criterion to ductile fracture

Yuanli Bai et al.

INTERNATIONAL JOURNAL OF FRACTURE (2010)

Add to Collection

Article Mechanics

Numerical prediction of slant fracture with continuum damage mechanics

X. Teng

ENGINEERING FRACTURE MECHANICS (2008)

Add to Collection

Article Engineering, Mechanical

Dynamic tensile characteristics of TRIP-type and DP-type steel sheets for an auto-body

Hoon Huh et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2008)

Add to Collection

Article Engineering, Mechanical

A new model of metal plasticity and fracture with pressure and Lode dependence

Yuanli Bai et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2008)

Add to Collection

Article Mechanics

Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading

Liang Xue

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)

Add to Collection

Article Engineering, Mechanical

On fracture locus in the equivalent strain and stress triaxiality space

YB Bao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.