☆ 4.4 Article

Microscale modelling of lightning damage in fibre-reinforced composites

JOURNAL OF COMPOSITE MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Mechanics

Stochastic lightning damage prediction of carbon/epoxy composites with material uncertainties

S. Z. H. Shah et al.

Summary: This study presents a novel stochastic modeling framework for predicting lightning thermal damage in carbon/epoxy composites. The results show that the use of stochastic electrical conductivity slightly increases the predicted thermal damage, while the presence of voids does not significantly affect the damage development. Additionally, the proposed model is capable of predicting asymmetric lightning damage to carbon/epoxy composites.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Engineering, Multidisciplinary

Understanding and representing heating and heating rate effects on composite material properties for lightning strike direct effect simulations

S. L. J. Millen et al.

Summary: The study investigated the impact of heating rate on thermal damage predictions during lightning strikes through experimental and simulation analysis. It was found that using maximum heating rate extrapolation improved prediction accuracy, reducing errors in predicted severe damage area to within 8% of experimental values.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Materials Science, Composites

On the Effect of Dielectric Breakdown in UD CFRPs Subjected to Lightning Strike Using an Experimentally Validated Model

T. M. Harrell et al.

Summary: In response to increasing global energy demands, Wind Turbine manufacturers are producing turbines with longer blades to generate more electrical energy. Carbon Fibre Reinforced Polymers (CFRP) have been introduced to lightweight these blades, posing new challenges in lightning protection. This paper develops and validates a modeling approach to predict lightning damage in CFRP materials.

APPLIED COMPOSITE MATERIALS (2022)

Add to Collection

Article Engineering, Manufacturing

Numerical modeling of 3D woven composite reinforcements: A review

Yanneck Wielhorski et al.

Summary: The literature on numerical modeling of 3D woven composite reinforcements has seen a wide range of studies in the last two decades, with two distinct strategies emerging: predictive approaches involving mechanical constructions and numerical simulations, and descriptive approaches focusing on extracting real textile geometry. Different strategies have been employed for yarn behavior modeling at different scales, with a proposed common terminology for organizing and discussing strategies.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Experimental study of the damage behaviour of laminated CFRP composites subjected to impulse lightning current

Yafeng Li et al.

Summary: Compared with traditional metal alloy materials, carbon fibre-reinforced polymer (CFRP) composites have many advantages. This study investigates the damage behavior of CFRP laminates exposed to impulse lightning current. Non-destructive techniques show that increasing current amplitude intensifies damage to CFRP samples, while the presence of an insulating epoxy resin layer exacerbates lightning strike damage. The use of expanded copper foil protection mitigated the damage.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Materials Science, Composites

Thermal-damage suppression of composite material by anti-lightning NCF/ CIPCF film

Fusheng Wang et al.

Summary: This study focuses on the lightning strike protection (LSP) design for carbon fiber reinforced plastic (CFRP) and proposes an anti-lightning film reinforced by nickel-coated carbon fibers/carbonyl iron powders conductivity framework (NCF/CIPCF). The numerical method used in this study is validated, and the effects of the NCF/CIPCF film on lightning damage suppression for CFRP laminates are evaluated. Results show that the NCF/CIPCF film effectively controls the damage of CFRP laminates, making it a promising method for LSP design of aircraft.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Engineering, Mechanical

Influence of hybridisation on energy absorption of 3D woven composites under low-velocity impact loading. Modelling and experimental validation

Raul Munoz et al.

Summary: This study investigates the low velocity impact behavior and energy absorption capability of a hybrid 3D woven composite made from different fibers. The experimental results reveal the material's pseudo-ductile behavior and its higher capability to absorb impact energy when the glass plies are located at the back face of the laminate.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A new multi-scale framework for analyzing the thermo-mechanical coupling mechanism of the composite laminates

Heng Cai et al.

Summary: This article investigates the failure mechanism of composite laminates under a coupled thermo-mechanical effect. A novel modeling scheme is presented to capture the nonlinear deformation at different scales influenced by temperature, and a visco-plastic constitutive model with temperature effect is used to study nonlinear responses. The experimental data highly correlates with the theoretical results, showing temperature improvement in matrix toughness.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2022)

Add to Collection

Article Mechanics

Coupled thermal electrical and mechanical lightning damage predictions to carbon/epoxy composites during arc channel shape expansion

Juhyeong Lee et al.

Summary: This paper presents a new finite element methodology to predict highly nonlinear, transient thermal-electrical-mechanical responses of carbon/epoxy laminates subjected to simulated lightning currents. The FE predictions were validated with the physical lightning damage observed in laboratory-generated strikes. The predicted responses were strongly influenced by arc channel parameters, suggesting that using more realistic parameters can lead to better agreements with experimental results.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Mechanics

Lightning strike-induced dynamic conduction characteristics and damage behavior of carbon fiber-reinforced polymer composites

Jinru Sun et al.

Summary: This study aimed to investigate the lightning-induced conduction characteristics of carbon fiber-reinforced polymer (CFRP) composites and improve the simulation of lightning damage. By establishing a potential barrier model and incorporating effective resistance, the research showed that effective resistance can enhance the simulation study and reduce the deviation between simulated and experimental results.

COMPOSITE STRUCTURES (2021)

Add to Collection

Review Mechanics

Modelling and analysis of simulated lightning strike tests: A review

S. L. J. Millen et al.

Summary: This article focuses on the increasing use of electrically resistive composites in aircrafts, the importance of analysing lightning strike damage, and the role of simulations in this analysis. It reviews the modeling and simulation approaches in literature, particularly focusing on material properties, construction, loading strategies, meshing methods, and results. Discussions on current and proposed lightning strike modeling approaches, along with their limitations and future challenges, are also presented.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Mechanics

Modelling and understanding edge glow effects on material failure resulting from artificial lightning strike

S. L. J. Millen et al.

Summary: This paper investigates the impact of edge glow effects on material failure prediction during artificial lightning strikes. A new modelling approach is proposed, and Finite Element simulations are conducted to compare results against experimental data. The study reveals that changes in inter-ply properties and edge glow effects have significant effects on the predicted damage areas and depth.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Multidisciplinary

An experimental study of impulse-current-induced mechanical effects on laminated carbon fibre-reinforced polymer composites

Yafeng Li et al.

Summary: This study investigates the impact of shock wave pressure induced by impulse currents on CFRP laminates, using a PVDF piezoelectric sensor to directly measure the pressure caused by arc channel expansion. The research showed that shock wave pressure from negative discharge exceeds that from positive discharge, with increases in current amplitude and strike distance resulting in larger pressures. A woven copper mesh protection decreases shock wave pressure, while an additional insulating epoxy resin layer enhances it.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Lightning arc channel effects on surface damage development on a PRSEUS composite panel: An experimental study

Dounia Boushab et al.

Summary: This study investigated lightning damage resistance in composite aircraft structures, particularly focusing on widespread surface damage caused by the expansion of lightning arc-root/channel. Experimental results showed that barriers placed near the lightning attachment point effectively limited intense local damage and widespread surface damage, indicating that the primary cause of the latter is the expansion of the lightning arc-root/channel.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Lightning mechanical damage prediction in carbon/epoxy laminates using equivalent air blast overpressure

Juhyeong Lee et al.

Summary: A new approach to predict lightning mechanical damage in carbon/epoxy laminates using equivalent air blast overpressure (ABO) is proposed. Three different models were presented, with results showing that ABO models can serve as an alternative to SWO models for predicting mechanical damage.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Modeling the lightning continuing current electric arc discharge and material thermal damage: Effects of combinations of amplitude and duration

Yakun Liu et al.

Summary: The study uses a UPM-FEM model to analyze the impact of current amplitude and duration on material damage, highlighting the energy sources and effects of different physical processes at low current levels. It suggests using a large current amplitude for achieving consistent arc properties and material damage in lightning continuing current tests.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Mechanics

Micromechanical analysis of UD CFRP composite lamina under multiaxial loading with different loading paths

Jiayun Chen et al.

Summary: The study investigates the influence of loading path on the failure of unidirectional carbon fibre reinforced polymer composite laminae IM7/8552, using a 3D micromechanical model based on finite element method and artificial neural network technology. Results show that under specific loading conditions, the failure strength and patterns of the RVE are independent of loading paths.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Materials Science, Composites

Thermal dynamic damage of aircraft composite material suffered from lightning channel attachment based on moving mesh method

Xiangteng Ma et al.

Summary: This paper studies the coupling mechanism between lightning channel and composite material by establishing a Magneto Hydro Dynamics (MHD) model. The results show the characteristics of current flow, magnetic field contours, and damage morphology. The mutual relationship between lightning damage morphology and lightning channel evolution is also investigated.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Framework for Predicting Failure in Polymeric Unidirectional Composites through Combined Experimental and Computational Mesoscale Modeling Techniques

Bilal Khaled et al.

Summary: As composites become increasingly popular, finite element material models that homogenize the composite response are the logical choice due to the computational cost of modeling the entire microstructure and the challenge of obtaining a complete set of experimental data for deformation and failure characterization. This paper focuses on developing a modeling framework that obtains plasticity, damage, and failure-related experimental data for each composite constituent, and generating mesoscale finite element models to represent a typical carbon fiber/epoxy resin unidirectional composite. These models are validated with experimental data and lay the foundation for defining a homogenized material model for predicting composite failure.

FIBERS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Fabrication of the silver modified carbon nanotube film/carbon fiber reinforced polymer composite for the lightning strike protection application

Qianshan Xia et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Materials Science, Composites

Predictive multiscale modeling for Unidirectional Carbon Fiber Reinforced Polymers

Jiaying Gao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Composites

Impact Response of Carbon/Kevlar Hybrid 3D Woven Composite Under High Velocity Impact: Experimental and Numerical Study

Sohail Ahmed et al.

APPLIED COMPOSITE MATERIALS (2020)

Add to Collection

Article Materials Science, Composites

Computational micromechanics-based prediction of the failure of unidirectional composite lamina subjected to transverse and in-plane shear stress states

Lei Wan et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

Add to Collection

Article Engineering, Mechanical

Understanding the influence of test specimen boundary conditions on material failure resulting from artificial lightning strike

S. L. J. Millen et al.

ENGINEERING FAILURE ANALYSIS (2020)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical analysis of damage mechanisms for carbon fiber-reinforced polymer composites subjected to lightning strikes

Jinru Sun et al.

ENGINEERING FAILURE ANALYSIS (2020)

Add to Collection

Article Materials Science, Composites

Quantifying the Influence of Lightning Strike Pressure Loading on Composite Specimen Damage

P. Foster et al.

APPLIED COMPOSITE MATERIALS (2019)

Add to Collection

Article Engineering, Manufacturing

Enhanced lightning strike protection of carbon fiber composites using expanded foils with anisotropic electrical conductivity

Yunli Guo et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Materials Science, Composites

Failure criteria of unidirectional carbon fiber reinforced polymer composites informed by a computational micromechanics model

Qingping Sun et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Mechanics

Numerical estimations of lightning-induced mechanical damage in carbon/epoxy composites using shock wave overpressure and equivalent air blast overpressure

Juhyeong Lee et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Lightning strike damage on the composite laminates with carbon nanotube films: Protection effect and damage mechanism

Jikui Zhang et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Engineering, Multidisciplinary

A unified framework for the multi-scale computational homogenisation of 3D-textile composites

Z. Ullah et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Efficient generator of random fiber distribution with diverse volume fractions by random fiber removal

Shin-Mu Park et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Materials Science, Composites

Damage analysis of carbon fiber composites exposed to combined lightning current components D and C

Qi Dong et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Electrical percolation threshold of carbon black in a polymer matrix and its application to antistatic fibre

Hyun-Jung Choi et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Materials Science, Composites

Coupled Thermal-Mechanical Progressive Damage Model with Strain and Heating Rate Effects for Lightning Strike Damage Assessment

S. L. J. Millen et al.

APPLIED COMPOSITE MATERIALS (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Sequential finite element modelling of lightning arc plasma and composite specimen thermal-electric damage

S. L. J. Millen et al.

COMPUTERS & STRUCTURES (2019)

Add to Collection

Article Mechanics

Analysis on electrical and thermal conduction of carbon fiber composites under lightning based on electrical-thermal-chemical coupling and arc heating models

Guoshun Wan et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Mechanics

Modelling mechanical lightning loads in carbon fibre-reinforced polymers

C. Karch et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)

Add to Collection

Article Materials Science, Composites

Thermal response of carbon fiber epoxy laminates with metallic and nonmetallic protection layers to simulated lightning currents

Juhyeong Lee et al.

POLYMER COMPOSITES (2018)

Add to Collection

Article Mechanics

Delamination analysis of CFRP laminates exposed to lightning strike considering cooling process

Shintaro Kamiyama et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Mechanics

Understanding how arc attachment behaviour influences the prediction of composite specimen thermal loading during an artificial lightning strike test

P. Foster et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Mechanics

The coupling mechanism and damage prediction of carbon fiber/epoxy composites exposed to lightning current

H. Chen et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Physics, Fluids & Plasmas

The development of shock wave overpressure driven by channel expansion of high current impulse discharge arc

Jia-ming Xiong et al.

PHYSICS OF PLASMAS (2018)

Add to Collection

Article Mechanics

Coupled thermal-mechanical damage model of laminated carbon fiber/resin composite subjected to lightning strike

Qi Dong et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Engineering, Multidisciplinary

Artificial lightning strike tests on PRSEUS panels

Juhyeong Lee et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Engineering, Civil

Multi-scale modelling of dynamic progressive failure in composite laminates subjected to low velocity impact

B. B. Liao et al.

THIN-WALLED STRUCTURES (2018)

Add to Collection

Article Physics, Fluids & Plasmas

A Multiphysics Simulation Approach for Efficient Modeling of Lightning Strike Tests on Aircraft Structures

Gasser F. Abdelal et al.

IEEE TRANSACTIONS ON PLASMA SCIENCE (2017)

Add to Collection

Article Engineering, Multidisciplinary

A new algorithm to generate representative volume elements of composites with cylindrical or spherical fillers

M. V. Pathan et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Article Engineering, Manufacturing

Computational micromechanics of the transverse and shear behavior of unidirectional fiber reinforced polymers including environmental effects

F. Naya et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Add to Collection

Article Materials Science, Composites

Avoiding interpenetrations and the importance of nesting in analytic geometry construction for Representative Unit Cells of woven composite laminates

R. D. B. Sevenois et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Engineering, Manufacturing

Experimental study of damage characteristics of carbon woven fabric/epoxy laminates subjected to lightning strike

Yichao Li et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Add to Collection

Article Materials Science, Composites

Micromechanical modelling and simulation of unidirectional fibre-reinforced composite under shear loading

Lei Yang et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)

Add to Collection

Article Mechanics

Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part I - Constitutive modelling

A. R. Melro et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)

Add to Collection

Article Engineering, Manufacturing

Coupled thermal-electrical analysis for carbon fiber/epoxy composites exposed to simulated lightning current

Toshio Ogasawara et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

Add to Collection

Article Engineering, Manufacturing

Artificial lightning testing on graphite/epoxy composite laminate

Yoshiyasu Hirano et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

Add to Collection

Article Engineering, Aerospace

Damage of Carbon/Epoxy Composite Plates Subjected to Mechanical Impact and Simulated Lightning

Paolo Feraboli et al.

JOURNAL OF AIRCRAFT (2010)

Add to Collection

Article Engineering, Manufacturing

Damage resistance and tolerance of carbon/epoxy composite coupons subjected to simulated lightning strike

Paolo Feraboli et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

Add to Collection

Article Mechanics

Influence of the loading path on the strength of fiber-reinforced composites subjected to transverse compression and shear

Essam Totry et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)

Add to Collection

Article Engineering, Aerospace

Measurement of epoxy resin tension, compression, and shear stress-strain curves over a wide range of strain rates using small test specimens

Justin D. Littell et al.

JOURNAL OF AEROSPACE ENGINEERING (2008)

Add to Collection

Article Materials Science, Composites

Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression:: Microscopic mechanisms and modeling

Carlos Gonzalez et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

Add to Collection

Article Engineering, Manufacturing

A comprehensive failure model for crashworthiness simulation of aluminium extrusions

H Hooputra et al.

INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.