Related references
Note: Only part of the references are listed.
Review
Polymer Science
Xiangrui Li et al.
Summary: This article focuses on the synthesis, modification, degradation, and application of polylactic acid (PLA), emphasizing the use of environmentally friendly materials for PLA modification and the applications of PLA composites in various fields such as construction, medical, packaging, and oil and water separation.
JOURNAL OF APPLIED POLYMER SCIENCE
(2023)
Article
Polymer Science
Jianqiao Liu et al.
Summary: A novel silicone rubber composite with low smoke, good mechanical property, and excellent flame retardant was prepared by introducing melamine (MEL), starch (St), and sepiolite (SEP) into SR. The optimal mechanical properties were achieved when the amount of SEP was 30 phr. The addition of SEP remarkably enhanced the strength and stability of the carbon layer, thus improving the flame retardant properties of the materials. The SEM images of CCT carbon residues revealed that the composite with SEP had a more stable carbon layer with fewer cracks compared to the composite without SEP.
JOURNAL OF APPLIED POLYMER SCIENCE
(2023)
Article
Polymer Science
Lubin Liu et al.
Summary: In this study, an organophosphate flame retardant with high thermal stability and phosphorus content was synthesized, and it improved the flame retardancy, thermostability, and crystallization properties of PLA. The flame retardant PLA composites showed excellent comprehensive properties, and this is important for expanding the application value of multifunctional PLA materials.
JOURNAL OF APPLIED POLYMER SCIENCE
(2023)
Article
Polymer Science
Yavuz Selim Tarih et al.
Summary: This study aimed to improve the toughness and delamination resistance of traditional fiber-reinforced composites using thermoplastic veil interleaves, thereby enhancing the vibration responses before and after dynamic loadings. The results showed that thermoplastic veils had positive effects on the damping ratios of glass fiber composites, but caused deterioration in carbon fiber composites. Moreover, the thermoplastic veil interleaves improved the dynamic properties and bending stiffness of the composites.
JOURNAL OF APPLIED POLYMER SCIENCE
(2023)
Article
Polymer Science
Chengbiao Ding et al.
Summary: This study prepared a novel composite nanofiber of PLA/sulfadiazine sodium/proteinase K and investigated its morphology and drug release behavior. The results showed potential of promoting healing of frostbite wounds, indicating an increase in capillaries and regeneration of hair follicles.
JOURNAL OF APPLIED POLYMER SCIENCE
(2022)
Article
Polymer Science
R. A. Ilyas et al.
Summary: This article presents the research progress and characteristics of polyactic acid (PLA) and its natural fiber-based green composites. PLA, as a thermoplastic polymer, has wide potential in replacing traditional polymers. Green composites, with advantages such as degradability, recyclability, high strength, and low toxicity, have been extensively used in fields like packaging and medicine. The article also discusses the research issues, challenges, and future development directions of PLA-based green composites.
Article
Chemistry, Physical
Yanzhu Wang et al.
Summary: This study evaluates the high- and low-temperature performance of asphalt mortar using the dynamic mechanical analysis (DMA) method. It finds that phase transition temperatures and certain indicators can effectively evaluate the performance. Additionally, the type of asphalt and gradation of mortar also play a role.
Article
Chemistry, Applied
Xiaobing Ma et al.
Summary: Modified chitosan-based flame retardants, such as phenylphosphorylated CS (PhPCS) and phenylphosphoramidated CS (PhPNCS), show promising prospects due to their sustainability, biodegradability, and good charring properties. These bio-based flame retardants exhibited excellent flame retardancy efficiency for poly(lactic acid) (PLA), but the mechanical properties of PhPCS-based biocomposites decreased with increasing content. On the other hand, PhPNCS-based biocomposites showed improved mechanical strengths due to the reactive compatibilization between the PhPNCS nanoparticles and PLA matrix.
CARBOHYDRATE POLYMERS
(2022)
Article
Nanoscience & Nanotechnology
Peipei Li et al.
Summary: A carbon nanosphere nanofluid was prepared through non-covalent modification and showed liquid-like behavior. It exhibited good dispersion stability and improved processability. When incorporated into epoxy matrix, the nanofluid improved the toughness and glass transition temperature of the composites.
Review
Materials Science, Composites
Balaji Devarajan et al.
Summary: Additive manufacturing is rapidly advancing in the manufacturing sector and has been recognized in Industry 4.0. This study focuses on printing natural fiber-reinforced composites, specifically jute fiber composites. As there is limited research on this topic, this study is important in consolidating relevant facts and figures.
POLYMER COMPOSITES
(2022)
Article
Polymer Science
Xianwen Dong et al.
Summary: This article introduces the research on the preparation of continuous glass fiber-reinforced polyamide composites using VB technology. The study found that the number of fiber layers, vacuum pressure, curing temperature, and curing time have an impact on the properties of the composites.
JOURNAL OF APPLIED POLYMER SCIENCE
(2022)
Article
Polymer Science
Qiang Yang et al.
Summary: By successfully preparing PVA-g-APEG graft copolymers, the phase separation of the PVA/PEO composite system can be effectively prevented, thus improving the continuity of nanofiber membrane preparation and expanding its application in biomedical and other fields.
JOURNAL OF APPLIED POLYMER SCIENCE
(2022)
Review
Polymer Science
N. B. Karthik Babu et al.
Summary: Polymers and their composites have a significant impact on industrial development. The self-reinforcement technique has improved the strength and degradability of polymer composites. This review article discusses the application of self-reinforcement in polymers, its effects on properties, and factors influencing the structure of self-reinforced composites.
JOURNAL OF APPLIED POLYMER SCIENCE
(2022)
Review
Polymer Science
Rafael L. Quirino et al.
Summary: This review discusses recent advancements in bio-based thermosets with a focus on resins prepared from vegetable oils, natural phenolic compounds, and other recently developed thermosetting systems. The article concludes with a critical perspective on the environmental implications of bio-based thermosets.
POLYMER INTERNATIONAL
(2021)
Article
Agricultural Engineering
Jianxiu Hao et al.
Summary: The study proposed a new method of wrapping bamboo fibers with polypropylene film, which resulted in improved tensile strength and modulus when the LBF content was at 40%. This approach shows potential for applications in thermoplastic prepreg composites.
INDUSTRIAL CROPS AND PRODUCTS
(2021)
Article
Polymer Science
Omar Talal Bafakeeh et al.
Summary: The multiscale hybridization of ceramic nanoparticles incorporated into polymer matrices reinforced with hybrid fibers offers an opportunity for developing high-performance, multifunctional composites for aeronautical structures. The addition of GNPs/Al2O3 nanoparticles significantly increases hardness and tensile strength, with composites containing 3 wt.% Al2O3 showing the highest tensile strength.
Article
Materials Science, Composites
R. Thamizh Selvan et al.
Summary: With the transition in aircraft materials from metal alloys to composite materials, recycling and reuse of the composite materials used in aircraft structures has become paramount. Glass Fiber Epoxy and Carbon Fiber, the most commonly used composites in aircraft structures, can be recycled through mechanical processes for construction applications. This study highlights the potential for value-added products from the recycling of these composites.
JOURNAL OF COMPOSITE MATERIALS
(2021)
Article
Materials Science, Composites
Yesong Wang et al.
Summary: This study focuses on 3D printing of continuous glass fiber reinforced composites-polylactic acid, showing that the mechanical properties of the printed samples are better than pure polylactic acid samples, with tensile and flexural strengths increasing significantly with higher fiber volume fractions. Microscopic observations of fracture surfaces were conducted to analyze the influence of layer heights on tensile strength and failure mechanism.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
(2021)
Article
Materials Science, Characterization & Testing
Kui Wang et al.
Summary: The study found that the mechanical properties of 3D printed composites were influenced by the competition of different mechanisms induced by hygrothermal aging, including the strengthening effect of polyamide matrix crystallization and the elimination of partial residual stress, as well as the weakening effects of loss of interlayer and intralayer bonding and breakage of glass fiber and matrix. Additionally, composites with separated distribution of continuous glass fiber layers exhibited higher stability in the early stage of aging, but this advantage gradually weakened over time.
Review
Polymer Science
R. A. Ilyas et al.
Summary: Research into bio-polymers, specifically focusing on polylactic acid (PLA), has gained momentum in recent years due to concerns about resource depletion and pollution. Natural fiber-reinforced PLA composites have been explored as alternatives to petroleum-based materials, with an emphasis on the type of fiber used in the matrix adhesion and their mechanical properties. Additionally, the current state of natural fiber-reinforced PLA 3D printing and their functions in stimuli-responsive polymers for 4D printing applications have also been discussed in this study.
Article
Engineering, Multidisciplinary
Dong-Jun Kwon et al.
Summary: The study found that high polypropylene content leads to uneven distribution of continuous glass fibers, resulting in unexpected viscoelastic properties of the resulting composites.
COMPOSITES PART B-ENGINEERING
(2021)
Article
Engineering, Multidisciplinary
Shangqin Yuan et al.
Summary: This review discusses the advantages of polymeric composites with multi-functionality over metals and the intensive attention that additive manufactured composites have received over the past decade. The focus is on the design and manufacturing methods for polymeric composites using additive manufacturing, including different types of reinforcements and designs for multi-functional applications.
COMPOSITES PART B-ENGINEERING
(2021)
Article
Materials Science, Composites
Liguo Yu et al.
Summary: CGF/PLA composites were prepared via 3D printing technology in this study, achieving full impregnation of fibers and high performance in bending strength, tensile strength, impact strength, and interlayer shear strength. The study effectively improves the impregnation effect of PLA resin on CGFs and promotes the development and application of 3D printing technology in high-performance composite manufacturing.
POLYMER COMPOSITES
(2021)
Article
Chemistry, Physical
Yunhong Liang et al.
Summary: This research successfully introduced the barbicel structure of eagle-owl feathers into bionic continuous carbon fiber-reinforced polylactic acid composites, effectively enhancing the impact resistance of the composite material. Additionally, adjusting the design parameters of the bionic structure model can significantly affect the mechanical properties of the composite material.
Review
Polymer Science
Erfan Rezvani Ghomi et al.
Summary: Bioplastics like PLA offer a solution to plastic pollution and environmental issues, with the potential to be a low-carbon material through optimization of production processes. Life cycle assessments provide insights into energy consumption and greenhouse gas emissions, highlighting the importance of developing sustainable practices for the production of PLA.
Article
Polymer Science
Mohammad Shayan Asenjan et al.
IRANIAN POLYMER JOURNAL
(2020)
Review
Polymer Science
K. M. Faridul Hasan et al.
Review
Chemistry, Multidisciplinary
Deesy G. Pinto et al.
APPLIED SCIENCES-BASEL
(2020)
Article
Materials Science, Textiles
Kaili Zhu et al.
FIBERS AND POLYMERS
(2019)
Article
Pharmacology & Pharmacy
Abdullah Isreb et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS
(2019)
Review
Polymer Science
Arnaldo D. Valino et al.
PROGRESS IN POLYMER SCIENCE
(2019)
Article
Chemistry, Applied
Aislana Cole de Paula et al.
CARBOHYDRATE POLYMERS
(2019)
Article
Materials Science, Composites
V. H. Sangeetha et al.
POLYMER COMPOSITES
(2018)
Review
Polymer Science
Kotiba Hamad et al.
PROGRESS IN POLYMER SCIENCE
(2018)
Article
Engineering, Manufacturing
A. K. Bledzki et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
(2015)
Article
Materials Science, Composites
Ben-Hui Fan et al.
COMPOSITES SCIENCE AND TECHNOLOGY
(2013)
Article
Engineering, Biomedical
M. S. Hasan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
(2013)