☆ 4.6 Article

Effect of multidimensional filler hybridization on the mechanical properties of thermoplastic polyurethane composites prepared by selective laser sintering

JOURNAL OF APPLIED POLYMER SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Transformation of TPU elastomers into TPU foams using supercritical CO2. A new reprocessing approach

P. Belmonte et al.

Summary: This study explores the transformation of TPUs into foams using supercritical CO2 and investigates the influence of pressure, temperature, and contact time on the foam properties. The results indicate that pressure has the greatest impact on foam properties, while temperature affects the expansion ratio and cell size significantly.

JOURNAL OF SUPERCRITICAL FLUIDS (2023)

Add to Collection

Article Polymer Science

Azo-Functionalized Thermoplastic Polyurethane for Light-Driven Shape Memory Materials

Baohai Pan et al.

Summary: Light-triggered shape memory thermoplastic polyurethane (TPU) was reported by grafting azido TPU with a photoswitchable azo compound. The trans-cis transitions of the azobenzene induced the recoiling of the main chain, leading to shape memory behavior. This facile method provides viable opportunities for soft robotics and smart TPU applications.

MACROMOLECULAR RAPID COMMUNICATIONS (2023)

Add to Collection

Article Materials Science, Ceramics

A high-performance thermally conductive and electrically insulating silver@siloxane/graphene/epoxy composites at low filler content: Fabrication, mechanism study of insulation and thermal conductivity enhancement

Zheng-Yi Wang et al.

Summary: Polymer composites with electrical insulation and high thermal conductivity are in high demand in the electronics industry. In this study, silver nanoparticles modified siloxane/graphene nanoplatelet core-shell hybrids were synthesized and used as fillers in epoxy resin to prepare composites with high thermal conductivity and good electrical insulation.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Chemistry, Physical

Fabrication of silver nanoparticles/copper nanoparticles jointly decorated nitride flakes to improve the thermal conductivity of polymer composites

Zheng-Bai Zhao et al.

Summary: The hexagonal boron nitride@(silver/copper) (h-BN@(Ag/Cu)) hybrids were synthesized through a two-step process, enhancing the thermal conductivity of PDMS. The electrical properties of the composites were investigated, and the mechanism for thermal conductivity improvement was demonstrated using Fogg's model. This research provides valuable insight for future high-performance thermally conductive materials.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Polymer Science

Exploring the influence of electron beam crosslinking in SEBS/TPU and SEBS-g-MA/TPU thermoplastic elastomer blends

M. G. Anagha et al.

Summary: The effects of electron beam radiation on thermoplastic elastomers based on SEBS/TPU and SEBS-g-MA/TPU were evaluated. Both systems showed the presence of three-dimensional cross-linked networks after irradiation. SEBS-g-MA/TPU exhibited improved tensile strength and interfacial adhesion, while SEBS/TPU showed reduced tensile strength with increased radiation dose. The blends also demonstrated improvements in thermal stability, rheological properties, and morphological characteristics.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Article Materials Science, Composites

Enhancement of mechanical properties of styrene-butadiene rubber composites by carbon black/silicone carbide hybrid filler networking

Nafise Torbati-Fard et al.

Summary: This study investigated the effects of silicon carbide (SiC) nanoparticles as a secondary filler on filler networking in carbon black (CB)/SiC hybrid filled styrene-butadiene rubber (SBR). The results showed that there was a critical loading of SiC in the low-loading range, which improved the dispersion state in the hybrid composite. The surface energy mismatch between CB and SiC decreased the kinetics and extent of filler networking in the SBR matrix.

POLYMER COMPOSITES (2022)

Add to Collection

Article Polymer Science

Fabrication of high-performance thermally conductive and electrically insulating polymer composites with siloxane/multi-walled carbon nanotube core-shell hybrids at low filler content

Zheng-Yi Wang et al.

Summary: A battery of siloxane/multi-walled carbon nanotube core-shell hybrids were successfully fabricated, which served as fillers to enhance the thermal conductivity and electrical insulation of epoxy resin composites.

POLYMER (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Multi-dimensional fillers synergistically enhanced thermal conductivity of TPU composites in selective laser sintering technology

Xiyun Zhang et al.

Summary: With the rapid development of the electronic field, there is an increasing demand for thermal management materials. Traditional technologies have limitations in terms of low precision and difficulty in forming complex thermal conductive composites. Therefore, a new forming process needs to be explored. This study successfully developed TPU/AlN/h-BN/MWCNTs composites by combining selective laser sintering (SLS) with different dimensions of thermally conductive fillers. The research showed that the composites achieved high thermal conductivity and maintained excellent mechanical properties.

MATERIALS TODAY COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Applied

Fabrication of BTA-loaded mesoporous silica-encapsulated ZSM-5 molecular sieve for enhancing anti-corrosion performance of waterborne epoxy coatings

Yi-Feng Zhang et al.

Summary: This study introduces mesoporous silica on ZSM-5 molecular sieves to improve the anti-corrosion performance of coatings. The results demonstrate that the introduction of mesoporous silica significantly increases the specific surface area and pore volume of the coatings, improving their anti-corrosion performance. Moreover, the composite coatings also exhibit good dielectric, mechanical, and UV light-shielding properties.

PROGRESS IN ORGANIC COATINGS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A flexible and wearable dual band bio-based antenna for WBAN applications

Abdelghafour Sid et al.

Summary: This paper presents a flexible and wearable dual band antenna suitable for Wireless Body Area Network applications, which demonstrates good performance in terms of reflection coefficient, gain and radiation patterns. Compared to other antennas, it shows competitive results and maintains stable performance under bending conditions, with specific absorption rate well below international standards.

AEU-INTERNATIONAL JOURNAL OF ELECTRONICS AND COMMUNICATIONS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Bulk Modification of Thermoplastic Polyurethanes for Self-Sterilization of Trachea Intubation

Yifan Guo et al.

Summary: The study used quaternized chitosan and thermoplastic polyurethane to prepare antibacterial tracheal intubation tube material, which exhibited good mechanical properties and long-term antibacterial performance, retaining strong antibacterial properties under in vitro hydrodynamic conditions, and also possessing a low hemolysis rate and cytotoxicity.

MACROMOLECULAR BIOSCIENCE (2021)

Add to Collection

Review Engineering, Civil

Methods and materials for additive manufacturing: A critical review on advancements and challenges

M. Bhuvanesh Kumar et al.

Summary: The paper provides a detailed review of Additive Manufacturing (AM) methods and materials, including metals and alloys, polymers, ceramics, and biomaterials, along with discussions on applications, benefits, and challenges associated with microstructures, mechanical properties, and process parameters. Additionally, the perspectives and challenges of using AM techniques for thin-walled structures are explored, as well as common problems such as inaccuracy, surface quality, and reinforcement distribution identified from the literature. Overall, the paper offers a comprehensive outlook on AM techniques, challenges, and future research directions.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Polymer Science

The Crystallisation, Microphase Separation and Mechanical Properties of the Mixture of Ether-Based TPU with Different Ester-Based TPUs

Yu-Hui Que et al.

Summary: The study showed that blending different types of polyurethanes can enhance compatibility at the molecular level, leading to integration of hard domains and improved material properties. Polyurethane components with similar hard segment ratios and chemical structures exhibited better compatibility, resulting in optimized phase separation structure and enhanced strength of the material.

POLYMERS (2021)

Add to Collection

Article Polymer Science

Evolution of ordered structure of TPU in high-elastic state and their influences on the autoclave foaming of TPU and inter-bead bonding of expanded TPU beads

Junjie Jiang et al.

Summary: This study introduced critical parameters including softening temperature and viscous flow temperature to explain the autoclave foaming of thermoplastic polyurethane and the inter-bead bonding mechanism of expanded TPU beads. The evolution of ordered structure of TPU in high-elastic state was characterized by different methods, showing possible mechanisms of strong inter-bead bonding in the molded ETPU parts.

POLYMER (2021)

Add to Collection

Article Automation & Control Systems

Study on process and parameter optimisation of selective laser sintering of thermoplastic polyurethane/carbon nanotube powder

Yu Zhuang et al.

Summary: The tensile strength of selective laser sintering thermoplastic polyurethane/carbon nanotube composites was improved by optimizing the process parameters, which also addressed issues such as delamination and smoke caused by material decomposition. The optimal combination of laser power, scan spacing, and layer thickness was determined, leading to a 4.42% increase in tensile strength of the parts.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Polymer Science

Effect of the Molecular Structure of TPU on the Cellular Structure of Nanocellular Polymers Based on PMMA/TPU Blends

Ismael Sanchez-Calderon et al.

Summary: By changing the chemistry and concentration of thermoplastic polyurethane, the cellular structure of nanocellular polymers based on poly(methyl-methacrylate) can be controlled. Increasing the content of hard segments or TPU leads to higher cell nucleation density and smaller cell size. Nanocellular polymers have been achieved with a core relative density between 0.15 and 0.20 and cell sizes between 220 and 640 nm.

POLYMERS (2021)

Add to Collection

Article Materials Science, Biomaterials

Characterization of Inflammatory and Fibrotic Encapsulation Responses of Implanted Materials with Bacterial Infection

Nathan A. Rohner et al.

Summary: The study developed an in vivo model for evaluating antimicrobial properties of new materials, finding that modified thermoplastic polyurethane (TPU) materials had high antimicrobial efficacy, eliminating bacteria after 30 days of implantation, and showing significant differences in inflammation and fibrous capsule thickness, thus improving the relevance of preclinical medical device material testing.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

The combination of Al2O3 and BN for enhancing the thermal conductivity of PA12 composites prepared by selective laser sintering

Yue Yuan et al.

Summary: The study investigated the impact of incorporating Al2O3 particles and BN plates on the thermal conductivity of PA12 composites prepared via a two-step mixing approach for SLS. The composites with hybrid fillers showed potential for improved tensile strength and significantly higher thermal conductivity. Overall, the composites demonstrated favorable thermal stability and maintained mechanical properties, suggesting vast potential for thermal management materials.

RSC ADVANCES (2021)

Add to Collection

Article Materials Science, Ceramics

ZrSi2-MgO as novel additives for high thermal conductivity of β-Si3N4 ceramics

Weide Wang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Add to Collection

Article Engineering, Manufacturing

A new approach to eliminating enclosed voids in topology optimization for additive manufacturing

Yulin Xiong et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Polymer Science

Effect of TPU hard segment content on the rheological and mechanical properties of PLA/TPU blends

Mohammadreza Nofar et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

3D printed origami honeycombs with tailored out-of-plane energy absorption behavior

Scott Townsend et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Polymer Science

Mechanical Properties of Additively Manufactured Thermoplastic Polyurethane (TPU) Material Affected by Various Processing Parameters

Tao Xu et al.

POLYMERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

ZnO nanowire-decorated Al2O3 hybrids for improving the thermal conductivity of polymer composites

Chao Liu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Materials Science, Characterization & Testing

Investigation into the processability, recyclability and crystalline structure of selective laser sintered Polyamide 6 in comparison with Polyamide 12

Peng Chen et al.

POLYMER TESTING (2018)

Add to Collection

Article Polymer Science

Characterization of Thermoplastic Polyurethane (TPU) and Ag-Carbon Black TPU Nanocomposite for Potential Application in Additive Manufacturing

Steven T. Patton et al.

POLYMERS (2017)

Add to Collection

Article Engineering, Manufacturing

In-plane energy absorption evaluation of 3D printed polymeric honeycombs

F. N. Habib et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2017)

Add to Collection

Article Chemistry, Physical

Hidden Second Oxidation Step of Hummers Method

Jong Hun Kang et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Improving thermal conductivity while retaining high electrical resistivity of epoxy composites by incorporating silica-coated multi-walled carbon nanotubes

Wei Cui et al.

CARBON (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Experimental measurement and finite element modelling of the compressive properties of laser sintered Nylon-12

Uzorna Ajoku et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Add to Collection

Article Engineering, Mechanical

Density prediction of crystalline polymer sintered parts at various powder bed temperatures

AE Tontowi et al.

RAPID PROTOTYPING JOURNAL (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.