Related references
Note: Only part of the references are listed.
Review
Instruments & Instrumentation
Peter M. M. Celliers et al.
Summary: Two variants of optical imaging velocimetry, namely one-dimensional streaked line-imaging and two-dimensional time-resolved area-imaging VISAR, have become crucial tools in high energy density sciences. This article provides a brief review of their historical development and current implementations at major high energy density facilities worldwide. The versatility and power of imaging VISARs are demonstrated through their diverse applications in various fields and experiments.
REVIEW OF SCIENTIFIC INSTRUMENTS
(2023)
Article
Physics, Applied
Eduardo Lozano et al.
Summary: This paper presents the properties of four isothermal equations and proposes a new functional form to address numerical problems under tension conditions. Experimental results show that the proposed functional form can adequately fit the data.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Zhiyong Jian et al.
Summary: Defects have a significant impact on the plastic properties of materials. Nanopores can facilitate inelastic deformation and collapse. The center axial direction of the nanopore determines the activated slip system. Shear stress is highly concentrated in the elastic region before plastic deformation, and then attenuates during inelastic deformation and nanopore collapse.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Arnaud Sollier et al.
Summary: Photonic Doppler velocimetry and digital high-speed shadowgraphy were used to characterize the chemical reaction zone parameters of pressed TNT samples. The study found the von Neumann spike pressure and the Chapman-Jouguet pressure of TNT.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
S. Yu. Grigoryev et al.
Summary: This study investigates Richtmyer-Meshkov instability at a solid-vacuum interface after reflection of a shock wave using the smoothed particle hydrodynamics (SPH) method. The simulations demonstrate three material response regimes to shock loading, including shear oscillations, plastic spikes with limited run, and unlimited growth of plastic or liquid jets. The transition from limited to unlimited jet growth depends on the geometry of the corrugated surface.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Peng Wen et al.
Summary: The aim of this Tutorial is to help new researchers understand how to perform molecular dynamics simulations of the shock response of materials and to highlight the importance of MD in studying shock physics. Two approaches, non-equilibrium and equilibrium MD simulations, for generating shock waves are reviewed. By using analysis techniques, MD simulations can provide a powerful mechanistic understanding of shock that complements shock experiments.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
P. Pradel et al.
Summary: This study conducted laser-driven shock experiments coupled with in situ x-ray imaging to investigate the dynamic response of polyurethane foam. The results showed permanent deformation of the foam and revealed heavy damage in the vicinity of the loaded zone.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Fabing Li et al.
Summary: This article describes tabletop experiments using a shock compression microscope and explains how to condition a laser beam to launch flyers. It presents various applications including measuring shock propagation in nanoporous media, describing shock wave energy absorption, and studying shocked inhomogeneous media using photoemissive probes.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
David B. Bober et al.
Summary: This article reports an experiment that combines ultrafast synchrotron-based radiography with plate impact loading to study the deformation of solid particles in shock-driven flow. By collecting X-ray images, researchers found that the extent of particle deformation is related to the ratio of drag stress to particle strength.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Meysam Akhtar et al.
Summary: We propose a tabletop method to study shock sensitivity of plastic-bonded explosives. By using high dynamic range optical emission spectroscopy and laser-launched flyer plate impacts, we can measure the emission spectrum and temporal profile of shocked explosives, allowing us to understand their shock response and underlying mechanisms. Our method can clearly distinguish the shock response of different explosives.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Bo Gan et al.
Summary: The melting temperatures and densities of Fe-Ni alloys in the liquid state under high-pressure conditions are crucial for understanding the composition and thermal structure of the Earth's core. Experimental measurements on Fe-11Ni-18Cr alloy show that its melting temperature under shock loading is about 1000 K lower than previous measurements. The addition of Ni and Cr has a minimal effect on the melting curve and density of Fe in the liquid state. This suggests the need for sufficient light elements in the outer core.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Daniel Thuermer et al.
Summary: High-entropy alloys are promising materials with excellent mechanical properties. The spall strengths of nanocrystalline high-entropy alloys are significantly reduced compared to single crystals, and the presence of stacking faults, twins, and dislocations during shock loading is consistent with recent experimental observations.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Jianrui Feng et al.
Summary: This paper models the formation of bonding interface in explosive welding through molecular dynamics simulations. The simulation results show that a flat interface is formed in solid-state welding and a wavy interface is produced in liquid-state welding. Fine grains are generated through two different pathways, either at the bonding interface and vortex regions after cooling or away from the bonding interface due to drastic collision between the jet and bonding surfaces.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Shuai Zhang et al.
Summary: First-principles calculations and analysis were performed to characterize the thermodynamic, structural, and electronic properties of liquid SiO2. The results shed light on the bonded-to-atomic transition in the high-energy-density regime, providing insights into the understanding of planetary interiors. The study reveals that the strong ionic bonds become short-lived during the transition, with the transition temperature being sensitive to pressure. The calculated Hugoniots align with previous experimental data, reconciling the discrepancies between experimental and theoretical findings on bond dissociation in early Earth and large planets' (oxide) constituents.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
P. Grivickas et al.
Summary: This study investigates solid-solid phase transitions in Zr thin films using shock compression induced by a short laser pulse. The results show a direct transformation to a metastable beta-phase at lower shock pressures, and equilibrium beta at higher pressures. The onset times of the alpha-beta transformation are found to be less than 100 ps, with completion times less than 200 ps.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Multidisciplinary Sciences
Richard G. Kraus et al.
Summary: The discovery of over 4500 extrasolar planets has led to the need for modeling their interior structure and dynamics. This study determined the melting point of iron and the length of dynamo action during core solidification using high-energy lasers and in situ x-ray diffraction. The findings suggest that terrestrial exoplanets with higher mass have longer dynamos, which play a significant role in shielding against cosmic radiation.
Article
Instruments & Instrumentation
Nicolas Sevelin-Radiguet et al.
Summary: Results of the 2018 commissioning and experimental campaigns of the new High Power Laser Facility on the Energy-dispersive X-ray Absorption Spectroscopy (ED-XAS) beamline ID24 at the ESRF show successful interfacing of the future laser delivering 15 J in 10 ns for laser-driven dynamic compression experiments on iron oxides, iron alloys, and bismuth probed by online time-resolved XAS.
JOURNAL OF SYNCHROTRON RADIATION
(2022)
Article
Physics, Applied
Akshay Joshi et al.
Summary: This study investigates the possibility of phase transition in soda-lime glass under shock compression, providing evidence for a shock-induced phase transition at relatively low pressures. The methodology developed from the experiments allows for modeling the shock and release behavior of soda-lime glass, filling a previous gap in modeling capabilities.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
James A. Stewart et al.
Summary: This study investigates the RMI behavior of copper material using molecular dynamics simulation, quantifies the material's strength, and finds discrepancies with experimentally matched hydrodynamic simulations. The results of the study show that although defect-free, single-crystal Cu samples used in MD overestimate the yield strength of the material, the scale difference between experiment and MD still exists.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
M. Ayad et al.
Summary: This article presents a study on the shock wave propagation in aluminum alloys produced by laser plasma. The study uses experimental and numerical tests to analyze the dynamic response of aluminum alloys under high strain rate laser shock. The results show that the 2D compressive effects depend not only on the focal spot size and target thickness, but also on the power density and material initial yield strength.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
J. E. Hammerberg et al.
Summary: This study uses large-scale non-equilibrium molecular dynamics simulations to investigate the steady-state frictional force at different velocities during metal sliding. The results reveal various physical mechanisms that influence the frictional force, including grain growth and refinement, evolution of plastic strains and strain rates, material mixing, and melting. These mechanisms can be applied to macroscopic continua.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
V. V. Skripnyak et al.
Summary: The article presents new results of numerical simulation on the mechanical behavior of metals and alloys with a hexagonal close-packed (HCP) lattice under dynamic loadings in a wide range of temperatures. A model for numerical simulation and a kinetic damage model were proposed to improve the accuracy of predicting dynamic fracture.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
B. F. Henson et al.
Summary: A thermal ignition model is used to calculate the time and distance to homogeneous shock initiation in single crystal PETN. An iterative algorithm is presented to calculate the temperature and volume as a function of pressure, and the calculated states compare favorably with experimental observations.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
T. M. Hartsfield et al.
Summary: In this study, we measure the continuous thermal radiance of liquid metal fragments ejected into vacuum, nonreactive, and reactive gas to determine the absolute temperature of the ejecta cloud. We also develop a model to analyze the thermal behavior of the ejecta under various conditions.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
L. Soulard et al.
Summary: This article combines theoretical analysis and molecular dynamics simulations to explore the complex processes of drop impact on a solid surface. Simple formulas for calculating the velocity and orientation of the jet are established, and criteria for the appearance of the jet are proposed.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Mikhail Bannikov et al.
Summary: The study reveals that foreign object damage can reduce the fatigue strength of materials during consecutive loading, and examines the transition of fatigue damage and crack initiation through amplitude-frequency analysis. Additionally, profiling measurements are used to identify the roughness scale invariants in damaged areas, contributing to the formulation of crack propagation laws.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
G. I. Kanel et al.
Summary: This study investigated the evolution of shock compressive pulses and dynamic tensile (spall) strength in pure [100]-oriented molybdenum single crystals through a series of planar impact tests. The results showed that pre-straining reduced the molybdenum Hugoniot elastic limit while increasing the dynamic tensile (spall) strength. The spall fracture was found to be brittle with a weak dependence on the tensile strain rate.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Saryu J. Fensin et al.
Summary: This study investigates the effect of grain size on spall failure in two-phase materials. The results show that while spall strength is independent of grain size, the total amount of damage increases with increasing grain size.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
S. Zilberman et al.
Summary: In this study, a highly localized, rapid-response pressure measurement of a shock wave front in a solid was achieved using a miniature fiber-optic-based probe. The 100 μm probe demonstrated superior measurement capabilities in time response and localization compared to the 1 mm probe, as well as better agreement with simulation results.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
D. E. Kittell et al.
Summary: A first-of-its-kind model calibration was performed using Sandia National Laboratories' high-throughput initiation (HTI) experiment for vapor-deposited explosive films. The study found that a two-step Arrhenius kinetics model accurately captures the behavior of hexanitrostilbene (HNS) films, but fails to fit the data of pentaerythritol tetranitrate (PETN) films. Future work should explore the use of ignition and growth models as well as other reactive burn models.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Nirmal K. Rai et al.
Summary: When the void content and structure of a high explosive (HE) are altered, the shock initiation behavior of the material changes. This study investigates the use of thermally expandable microspheres (TEMs) as a dopant in a polymer bonded explosive (PBX) matrix to control the shock initiation properties. The results show that the expanded TEMs cause a secondary shock wave, increasing the overall shock sensitivity.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Andrew K. Boddorff et al.
Summary: In this study, the dynamic tensile spall failure of additively manufactured two-layered bimetallic GRCop-84-Inconel (R) 625 alloys with different interface geometries was investigated using gas-gun experiments and multiple photon Doppler velocimetry. The results showed that the spall failure location and spall strength varied depending on the geometry of the interface. The combination of experimental results and microstructural observations provided a useful method for determining the complex spall failure response of two-layered bimetallic alloys.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Randy A. Meijer et al.
Summary: We experimentally investigate the interaction between intense laser pulses and metallic microdroplets and the resulting deformation. Two distinct droplet deformation regimes, governed by incompressible flow or shock waves, have been identified. By scanning pulse durations, we study the transition between these regimes and find the key parameter determining the type of deformation to be the ratio of pulse duration to the acoustic timescale of the droplet. We also examine the influence of fast rise times on the results.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Y. F. Xu et al.
Summary: We investigated shock wave propagation in single-crystal Cu using molecular dynamics simulations and found a significant difference in the velocity of plastic shock waves compared to the linear shock velocity-particle velocity relation. This difference can be attributed to changes in the mechanisms of plastic shock wave generation and propagation, transitioning from a dislocation nucleation-dominant mode to an alternating nucleation and growth mode, and finally to a growth-dominant mode.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
M. C. Marshall et al.
Summary: We present measurements of diamond formation in doubly shocked epoxy and find that diamond can precipitate not only from carbon and hydrogen-based polymers but also from polymers with the addition of oxygen, nitrogen, and chlorine.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
A. Yu Dolgoborodov et al.
Summary: This study investigated the shock compression of porous nickel and found that the Hugoniot and expansion isentropes of nanosized nickel particles were consistent with micron-sized nickel. The Hugoniot calculated based on the equation of state for porous nickel was also in good agreement with experimental data. It was also observed that in the middle pressure range, the expansion isentropes became flatter as the particle velocity increased.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Paul E. Specht et al.
Summary: Uniaxial strain, reverse-ballistic impact experiments were conducted on 17-4 PH H1025 stainless steel, and the resulting Hugoniot curve was determined with a peak stress of 25 GPa through impedance matching. The experiments revealed evidence of a solid-solid phase transition in the steel, consistent with other martensitic Fe-alloys.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Jennifer L. Jordan et al.
Summary: Polyurea shows potential for blast mitigation and its dynamic properties, including shock Hugoniot, spall strength, and shear strength, were comprehensively studied.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Nirmal K. Rai et al.
Summary: This study examines the effect of different closure approaches on the thermodynamic properties of reaction mixture, showing that only PT equilibrium and P equilibrium closures accurately describe the mixture under both compression and expansion loading regimes.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Zhaoxiu Jiang et al.
Summary: This study analyzes the dynamic characteristics and damage evolution process of ductile metal spalling behavior by establishing a model. The results show that the spall strength is closely related to the maximum tensile stress, and the impact stress has the most important effect on the damage evolution rate, while the stress pulse duration only affects the void coalescence process.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
S. A. Turnage et al.
Summary: Plate impact experiments were conducted to study the dynamic response of Galfenol, revealing its low Hugoniot elastic limit and high spall strength. A cusp was observed on the velocity-time profiles, but its nature is still not well understood. Shock-recovered specimens exhibited brittle intergranular fracture with cracks possibly growing along grain boundaries.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Thao Thi Phuong Nguyen et al.
Summary: This study investigated laser-induced excitation of elastic surface waves at free surface and soft solid-liquid interface using a custom-designed photoelasticity imaging technique. The results revealed the existence of unique surface wave phenomena at both interfaces.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Ashutosh Mohan et al.
Summary: In this study, the phase transitions of C6H6:C6F6 cocrystal under dynamic compression were investigated using time-resolved Raman spectroscopy. The transitions from liquid to solid-I and from solid-I to solid-VI were observed, as well as a transition from solid-VI to solid-VII.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
V. K. Euser et al.
Summary: The effect of varying phase fractions on the overall spall strength and damage behavior of two plain carbon, ferrite-pearlite steels (1045 and A283) was investigated. It was found that a higher pearlite fraction led to a lower spall strength. The rate of damage growth and coalescence was similar between the two alloys, but 1045 exhibited more continuous cracks while A283 had a greater prevalence of discrete voids.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Robert Knepper et al.
Summary: A high-throughput experimental setup was used to characterize initiation threshold and growth to detonation in the explosives HNS and PETN. Prompt initiation was observed in both HNS and PETN films under specific conditions. This experimental setup enables rapid quantification of the growth of reactions in explosive materials and can be used for parameterizing reactive burn models in simulations.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
S. Yu. Grigoryev et al.
Summary: In this study, an explicit failure model for ceramics undergoing a solid-solid phase transition under shock compression is developed and tested. Smoothed particle hydrodynamics simulations are performed to optimize the model parameters and agreement with shock-wave experiments is achieved by considering the inclusion of a phase transition with hysteresis. The evolution of damage spreading in samples with propagation of the failure wave front is discussed, revealing the formation of regular structures of failure bands guided by the distributions of equivalent stress and shear strength.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Benoit Revil-Baudard et al.
Summary: This paper presents a new polycrystalline model and computational framework for studying the thermo-mechanical response of energetic materials. The model considers the anisotropic elastic and plastic behavior of individual grains and their evolution at the meso-scale. The simulations demonstrate the importance of considering crystallinity and anisotropy in accurately predicting temperature rise and stress distribution in energetic systems.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Neil K. Bourne et al.
Summary: This study investigates the different responses of materials to weak and strong shock waves and proposes a definition based on available data. It is found that weak shock behavior is associated with the collapse of local material microstructure, while strong shock compression leads to a homogeneous hydrodynamic state. The transition occurs through the collapse of mesoscale volume defects, and the threshold is believed to correspond to the theoretical strength of the element.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Martin Langenderfer et al.
Summary: This study evaluates the synthesis of silicon carbide nanoparticles from carbon liberated by negatively oxygen balanced explosives and determines the effects of three factors on detonation performance and product composition.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
S. J. Burns et al.
Summary: A new constitutive expression based on Cauchy's stress tensor has been discovered, which emphasizes pressure and shear stress. The expression takes into account atomic solid-state phase changes and shear-induced plasticity in crystalline cells. The thermo-mechanical system describes the material's constitutive response with pressure separated from plasticity, without specific volume restrictions. It has been shown that in elastic copper, the ratio of heat to shear work approaches zero at low temperatures and exceeds one as temperature approaches melting. Plastic deformation, dominated by dissipative shear stresses, heats the material while excluding phase changes caused by hydrostatic pressure.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Masayuki Yoshida et al.
Summary: This study investigates the influence of pulse duration on the mechanical properties and dislocation density of an aluminum alloy treated using dry laser peening. The results show that a pulse duration of 1 ps achieves the maximum peening effects by generating the strongest shock pressure, suppressing optical nonlinear effects, and minimizing thermal effects.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Shobhan Roy et al.
Summary: This study presents a comparison between experimental observations and numerical simulations on the formation of hot spots in a deconstructed plastic-bonded explosive. Despite the challenges and limitations, the results show consistency between the experimental and simulation techniques and reveal multiple mechanisms of hot spot formation.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
E. Barraud et al.
Summary: In this study, the dynamic behavior of a nickel-based superalloy under shock loading was investigated using laser-launched flyers. It was found that different microstructures and heat treatment conditions significantly influence the dynamic failure mechanisms.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Tariq D. Aslam et al.
Summary: Graded density impactors are composite impactors used in gas gun experiments to customize the drive conditions for test materials. Previous designs relied on thin, discrete layers of different materials. These impactors can shock and compress materials smoothly in dynamic experiments, allowing for exploration of a larger thermodynamic space.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Michael R. Armstrong et al.
Summary: This study investigates the response of highly oriented pyrolytic graphite to rapid compression and observes a phase transformation to a highly textured hexagonal diamond structure at high energy. It also shows the formation of a highly oriented lonsdaleite following compression, suggesting a diffusionless martensitic mechanism in the phase transition.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Physics, Applied
Sergey Ashitkov et al.
Summary: In this study, the shock compression of magnesium alloy polycrystalline films on glass under ultrashort laser pulses was investigated. The motion and reflectivity changes of the samples were continuously monitored using ultrafast spectral interferometry. The results provide insight into the elastoplastic shock wave evolution, elastic precursor decay, shear, and tensile strengths at extreme strain rates.
JOURNAL OF APPLIED PHYSICS
(2022)
Article
Instruments & Instrumentation
A. Denoeud et al.
Summary: The ultrafast x-ray powder diffraction setup developed at the LULI2000 laser facility allows for structural measurements during compression to study samples under different compression dynamics. This setup enables us to shield detectors against x-rays generated by the laser-plasma interaction and measure pressure and temperature history of probed samples.
REVIEW OF SCIENTIFIC INSTRUMENTS
(2021)
Article
Physics, Applied
Kelly Williams et al.
Summary: This study demonstrates that altering the charge geometry results in significant deviation in overpressure vs orientation. While the mechanisms driving geometric blast wave product anisotropy have not been well defined, computer simulations and empirical studies show an isotropic radial flow from cylindrical charges and significant anisotropy from prismatic charges.
JOURNAL OF APPLIED PHYSICS
(2021)
Article
Physics, Applied
Ronald W. Armstrong
Summary: The paper describes constitutive relations for slip and deformation twinning behaviors of several metals at different imposed strain rates, focusing on their application in impact and pressure tests. The study also includes simulations of corresponding dislocation-based deformation behaviors.
JOURNAL OF APPLIED PHYSICS
(2021)
Article
Physics, Applied
Yasuyuki Horie
Summary: This paper investigates the bounds and approximations in the original derivation of the fourth-power scaling of shock waves in solids, independent of constitutive assumptions. Results include an upper bound for shock pressure and a restriction on the power coefficient range for materials with a power-type function. By applying the Onsager relation to strain rate calculation, a quadratic function for the strain rate-shock pressure relation is proposed, leading to the fourth-power relation.
JOURNAL OF APPLIED PHYSICS
(2021)
Article
Physics, Applied
Semen Murzov et al.
Summary: This study investigates elastoplastic and polymorphic alpha-epsilon transformations in iron films induced by ultra-short laser-driven shock waves using inverse analysis techniques. The results indicate that the polymorphic transformation in iron requires higher stress under picosecond loading, and may occur partially even at very high stresses if the unloading tail after the shock front is too short.
JOURNAL OF APPLIED PHYSICS
(2021)
Article
Physics, Applied
Reid Ginoza et al.
Summary: Parametric forms like linear and quadratic fits are common for fitting Hugoniot curve to shock data, but a semi-parametric Hugoniot curve with cubic b-splines was developed to allow more flexibility. A genetic algorithm respecting convexity constraints performed optimization to fit experimental data, resulting in close agreement with known truth in two cases with artificial data.
JOURNAL OF APPLIED PHYSICS
(2021)
Article
Multidisciplinary Sciences
A. Lazicki et al.
Summary: Carbon, the fourth-most prevalent element in the Universe, is essential for life and exists in multiple allotropes. Experimental results show that solid carbon retains its diamond structure even under extreme pressure, providing insights into the structure of carbon-rich exoplanets.
Article
Geosciences, Multidisciplinary
F. Coppari et al.
Summary: The discovery of a significant number of extrasolar planets challenges our understanding of the Solar System's planet formation and evolution. Many exoplanets are rocky and more massive than Earth, with complex stratification and rheology in their deep interiors.
Article
Instruments & Instrumentation
J. R. Rygg et al.
REVIEW OF SCIENTIFIC INSTRUMENTS
(2020)
Article
Multidisciplinary Sciences
Markus O. Schoelmerich et al.
SCIENTIFIC REPORTS
(2020)
Article
Multidisciplinary Sciences
Marius Millot et al.
Article
Instruments & Instrumentation
D. Broege et al.
REVIEW OF SCIENTIFIC INSTRUMENTS
(2019)
Review
Geosciences, Multidisciplinary
Thomas S. Duffy et al.
FRONTIERS IN EARTH SCIENCE
(2019)
Article
Physics, Multidisciplinary
Sally June Tracy et al.
PHYSICAL REVIEW LETTERS
(2018)
Review
Physics, Applied
C. A. Handley et al.
APPLIED PHYSICS REVIEWS
(2018)
Article
Physics, Applied
J. M. Foster et al.
JOURNAL OF APPLIED PHYSICS
(2017)
Article
Astronomy & Astrophysics
D. Kraus et al.
Article
Multidisciplinary Sciences
Youjun Zhang et al.
SCIENTIFIC REPORTS
(2016)
Article
Astronomy & Astrophysics
C. T. Unterborn et al.
ASTROPHYSICAL JOURNAL
(2016)
Article
Physics, Fluids & Plasmas
Tingting Qi et al.
PHYSICS OF PLASMAS
(2015)
Article
Multidisciplinary Sciences
M. Millot et al.
Article
Geosciences, Multidisciplinary
Guillaume Morard et al.
COMPTES RENDUS GEOSCIENCE
(2014)
Article
Physics, Multidisciplinary
K. Tono et al.
NEW JOURNAL OF PHYSICS
(2013)
Article
Geochemistry & Geophysics
B. Grocholski et al.
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH
(2013)
Article
Physics, Multidisciplinary
Miguel Martinez-Canales et al.
PHYSICAL REVIEW LETTERS
(2012)
Article
Instruments & Instrumentation
J. R. Rygg et al.
REVIEW OF SCIENTIFIC INSTRUMENTS
(2012)
Article
Materials Science, Multidisciplinary
G. I. Kanel
INTERNATIONAL JOURNAL OF FRACTURE
(2010)
Article
Instruments & Instrumentation
D. H. Dolan
REVIEW OF SCIENTIFIC INSTRUMENTS
(2010)
Article
Chemistry, Physical
Jian Sun et al.
JOURNAL OF CHEMICAL PHYSICS
(2009)
Article
Physics, Multidisciplinary
Jean Clerouin et al.
JOURNAL OF PHYSICS A-MATHEMATICAL AND GENERAL
(2006)
