4.7 Article

Slot-die coating fabrication of perovskite solar cells toward commercialization

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

Self-Assembled Donor-Acceptor Dyad Molecules Stabilize the Heterojunction of Inverted Perovskite Solar Cells and Modules

Haoran Liu et al.

Summary: This study presents an effective strategy to suppress the interfacial reaction between nickel oxide and perovskite, leading to improved performance and operational lifetimes of perovskite solar cells. The strategy also proves successful in the fabrication of perovskite modules, achieving high efficiency and good photostability.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Multidisciplinary

Alkali Additives Enable Efficient Large Area (>55 cm2) Slot-Die Coated Perovskite Solar Modules

Prem Jyoti Singh Rana et al.

Summary: A seed-assisted crystallization approach using alkali salts has been demonstrated to enable the fabrication of large-area and highly crystalline perovskite films. The slot-die coated perovskite films show improved optoelectronic properties and stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Multidisciplinary Sciences

Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells

Xiaodong Li et al.

Summary: A stable perovskite heterojunction was achieved in inverted solar cells by sulfidating the surface of lead-rich perovskite films, resulting in improved power conversion efficiency and open-circuit voltage.

SCIENCE (2022)

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Article Engineering, Electrical & Electronic

Slot-die processed perovskite solar cells: effects of solvent and temperature on device performances

Hyun-Jung Lee et al.

Summary: This study investigates the effects of perovskite precursor solvents and deposition temperatures on perovskite-layer formation for slot-die coating based solar cell fabrication. The results show that a solvent mixture of DMSO and DMF in a 5:5 ratio and a deposition temperature of 130 degrees Celsius lead to better solar cell performance, with an efficiency of up to 15.40% in slot-die based planar perovskite devices.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2022)

Article Chemistry, Physical

Reducing Losses in Perovskite Large Area Solar Technology: Laser Design Optimization for Highly Efficient Modules and Minipanels

Luigi Angelo Castriotta et al.

Summary: The perovskite solar technology has achieved comparable performance levels to other photovoltaic technologies, such as silicon and gallium arsenide, in just 10 years of research. It has the potential for low-cost manufacturing and process versatility. However, scaling up the technology for large areas requires additional processes to reduce losses, and laser processing is used to design connected cells into modules. By optimizing the laser design, the losses in perovskite solar modules can be reduced.

ADVANCED ENERGY MATERIALS (2022)

Article Energy & Fuels

Efficient Slot-Die-Processed Perovskite Solar Cells With 3-Allyloxy-1, 2-Propanediol Additive

Hyun-Jung Lee et al.

Summary: In this study, a functional additive-assisted slot-die-coating process was used to fabricate high-quality perovskite films, resulting in improved performance and stability of perovskite solar cells. The addition of 3-allyloxy-1, 2-propanediol (AP) in the perovskite precursor solution led to the formation of a high-quality film and the suppression of surface defects.

IEEE JOURNAL OF PHOTOVOLTAICS (2022)

Article Materials Science, Multidisciplinary

A Review of Recent Developments in Preparation Methods for Large-Area Perovskite Solar Cells

Shindume Lomboleni Hamukwaya et al.

Summary: The recent development in perovskite solar cells has led to a significant increase in research interest, particularly in the field of small-area cells which have achieved over 25% power conversion efficiency. This review examines the recent advancements in the preparation and fabrication methods of perovskite solar cells, as well as the methods for improving the efficiency of large-area perovskite films. The study concludes that blade coating, slot-die coating, and ink-jet printing have the highest potential for scalable manufacturing of large-area perovskite solar cells.

COATINGS (2022)

Article Nanoscience & Nanotechnology

Industrially Compatible Fabrication Process of Perovskite-Based Mini-Modules Coupling Sequential Slot-Die Coating and Chemical Bath Deposition

Iwan Zimmermann et al.

Summary: In this study, industrially relevant deposition techniques are developed for the fabrication of perovskite photovoltaic cells. The use of chemical bath deposition for tin oxide deposition and slot-die coating for perovskite layer allows for the growth of high-quality and uniform perovskite layers, resulting in improved power conversion efficiencies.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Nanoscience & Nanotechnology

Degradation and Self-Healing in Perovskite Solar Cells

Blake P. Finkenauer et al.

Summary: Organic-inorganic halide perovskites have a unique self-healing ability, where high-energy defects created by external stimuli can be healed by removing the perovskite from the degradation source. This property has been showcased in devices, extending their lifetime and mechanical durability. However, the mechanistic details and theory behind this trait are still limited. Understanding the intrinsic self-healing property can lead to the design of perovskite solar cells with extended lifetimes and durability.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Multidisciplinary

Blading of Conformal Electron-Transport Layers in p-i-n Perovskite Solar Cells

Md Aslam Uddin et al.

Summary: This study reports a new method for the fabrication of highly efficient PSCs and modules in ambient conditions. The use of blade technique to prepare thin films with good conductivity, along with additives that enhance the coverage and dispersity of perovskite and PCBM, leads to superior efficiency and stability.

ADVANCED MATERIALS (2022)

Review Chemistry, Multidisciplinary

Advances in SnO2 for Efficient and Stable n-i-p Perovskite Solar Cells

So Yeon Park et al.

Summary: This article reviews the key advancements in SnO2 development for perovskite solar cells, including different deposition methods and surface treatment strategies to enhance its performance. The general materials chemistry of SnO2 and the associated challenges and improvement strategies are discussed, with a focus on its impact on device characteristics. The article also highlights the applications of SnO2 in scalable processes and flexible devices, and provides perspectives on the future development of large-scale perovskite solar modules.

ADVANCED MATERIALS (2022)

Article Materials Science, Multidisciplinary

Performance improvement of slot-die-deposition based perovskite solar cells using diglycolic acid additives

Hyun-Jung Lee et al.

Summary: In this study, we aimed to improve the formation of perovskite films by slot-die-coating process. By introducing diglycolic acid (DA) as an additive in the perovskite precursor solution, we successfully enhanced the device efficiency and stability of the perovskite-based devices.

MATERIALS LETTERS (2022)

Article Materials Science, Multidisciplinary

Efficient mixed-cation perovskite photovoltaic cells via additive-assisted slot-die deposition

Hyun-Jung Lee et al.

Summary: The main aim of this study was to enhance the quality of slot-die-processed perovskite film layer by using an additive process, which could improve the performance and stability of perovskite devices. The addition of 2-hydroxyethyl acrylate (HEA) as an effective functional group controlled the growth, grain size, and defects of perovskite. The resulting device fabricated with HEA as an additive achieved a high efficiency of 16.08% and maintained an initial efficiency of 80% under air for 95 days.

MATERIALS RESEARCH BULLETIN (2022)

Article Multidisciplinary Sciences

Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells

Zhen Li et al.

Summary: Functionalizing the interfaces of multication and halide perovskite solar cells with an organometallic compound, ferrocenyl-bis-thiophene-2-carboxylate (FcTc(2)), enhances their efficiency and stability. The resulting devices exhibit high performance and stability, as demonstrated by tests and continuous operation.

SCIENCE (2022)

Article Energy & Fuels

Modulating crystal growth of formamidinium-caesium perovskites for over 200 cm2 photovoltaic sub-modules

Tongle Bu et al.

Summary: By tailoring the composition of the precursor ink and adding additives in the co-solvent system, high-efficiency perovskite solar cells over large areas have been achieved.

NATURE ENERGY (2022)

Article Energy & Fuels

In situ growth of graphene on both sides of a Cu-Ni alloy electrode for perovskite solar cells with improved stability

Xuesong Lin et al.

Summary: The use of a composite electrode of copper-nickel alloy and in situ-grown graphene improves the long-term stability of perovskite solar cells. This composite electrode has an appropriate work function and provides excellent protection against oxygen, water, and internal reactions. The resulting devices demonstrate high stability under various environmental conditions.

NATURE ENERGY (2022)

Article Chemistry, Physical

Temperature-controlled slot-die coating for efficient and stable perovskite solar cells

You-Hyun Seo et al.

Summary: The main challenge in the field of perovskite solar cells is to transform lab-scale processes into industry-related processes for commercialization. The hot slot-die coating method provides a simple and efficient way to fabricate perovskite films, achieving high power conversion efficiency and device performance by controlling temperature and coating speed.

JOURNAL OF POWER SOURCES (2022)

Article Multidisciplinary Sciences

Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells

Yang Zhao et al.

Summary: In halide perovskite solar cells, introducing RbCl doping effectively stabilizes the perovskite phase by converting excess PbI2 into an inactive compound. This strategy achieved a certified PCE of 25.6% for FAPbI(3) perovskite solar cells, with high device stability and minimal hysteresis effects.

SCIENCE (2022)

Article Energy & Fuels

Ethanol-based green-solution processing of α-formamidinium lead triiodide perovskite layers

Hyun-Sung Yun et al.

Summary: Researchers have developed an ethanol-based perovskite precursor solution that does not require an antisolvent step, resulting in the production of solar cells with 25% efficiency. This advancement eliminates the need for hazardous solvents and multistep processing in the manufacturing of perovskite solar cells.

NATURE ENERGY (2022)

Article Engineering, Electrical & Electronic

Fully-covered slot-die-coated ZnO thin films for reproducible carbon-based perovskite solar cells

Nutcha Khambunkoed et al.

Summary: The study successfully deposited high-quality ZnO thin films using a homemade slot-die coater setup, leading to improved performance and stability of carbon-based PSCs. By adjusting deposition parameters, fully-covered and compact films can be achieved.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2021)

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Article Nanoscience & Nanotechnology

Low-temperature processed tantalum/niobium co-doped TiO2 electron transport layer for high-performance planar perovskite solar cells

Yanyan Duan et al.

Summary: The development of a low-temperature chemical bath method for co-doping tantalum and niobium in the TiO2 ETL has shown improved conduction band level, reduced trap-state density, enhanced electron injection efficiency, and decreased charge recombination at the perovskite/ETL interface. This results in a superior power conversion efficiency of 19.44% in planar PSCs, providing new insights for low-cost and highly efficient PSCs fabrication.

NANOTECHNOLOGY (2021)

Review Materials Science, Multidisciplinary

Recent advances in perovskite/organic integrated solar cells

Qiang Guo et al.

Summary: This review discusses the recent developments, working mechanism, and charge dynamic in integrated perovskite/organic solar cells (IPOSC), as well as the potential to improve device performance.

RARE METALS (2021)

Article Chemistry, Multidisciplinary

Polymer-Assisted Single-Step Slot-Die Coating of Flexible Perovskite Solar Cells at Mild Temperature from Dimethyl Sulfoxide

Francesco Bisconti et al.

Summary: The study proposes the use of a polymeric material to deposit perovskite layers with easy processability, utilizing a starch-polymer/perovskite composite to enable the deposition of hybrid halide perovskite material in an uncontrolled humid environment without toxic solvents. This innovative approach enables the fabrication of flexible solar cells with power conversion efficiency higher than 3%.

CHEMPLUSCHEM (2021)

Review Materials Science, Multidisciplinary

A brief review of hole transporting materials commonly used in perovskite solar cells

Song Li et al.

Summary: Perovskite solar cells (PSCs) have gained significant attention in the field of photovoltaics due to their exceptional performance, with the power conversion efficiency reaching up to 25.2%. This review focuses on discussing various hole transporting materials (HTMs) in PSCs, emphasizing their role in improving photovoltaic performance. Different organic and inorganic HTMs are categorized and their advantages and disadvantages are demonstrated, with the aim of providing insights for the design and application of novel HTMs to further enhance PSCs performance.

RARE METALS (2021)

Article Multidisciplinary Sciences

Slot-die coating large-area formamidinium-cesium perovskite film for efficient and stable parallel solar module

Zhichun Yang et al.

Summary: This study utilized diphenyl sulfoxide (DPSO) additive to enhance the efficiency and stability of perovskite solar cells, resulting in the successful fabrication of high-efficiency solar modules.

SCIENCE ADVANCES (2021)

Review Materials Science, Multidisciplinary

Charge transporting materials for perovskite solar cells

Ting Ji et al.

Summary: Perovskite solar cells have seen significant advancements in recent years, with a focus on the evolution of charge transporting materials like metal oxides and organic materials for electron transport, and small molecules and polymers for hole transport. The future development prospects for different types of charge transporting materials are also discussed in the review.

RARE METALS (2021)

Article Multidisciplinary Sciences

Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules

Tongle Bu et al.

Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.

SCIENCE (2021)

Article Energy & Fuels

Slot-die coated methylammonium-free perovskite solar cells with 18% efficiency

Mathilde Fievez et al.

Summary: This study demonstrates a method of slot-die coating combined with gas quenching and substrate heating, which can produce compact, homogenous and reproducible perovskite films on large-area substrates. Perovskite solar cells with high power conversion efficiency were successfully fabricated using this technique.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Article Chemistry, Multidisciplinary

Sequentially Slot-Die-Coated Perovskite for Efficient and Scalable Solar Cells

Iwan Zimmermann et al.

Summary: This study presents a sequential deposition method for high efficiency triple cation perovskite solar cells, achieving uniform perovskite layers by carefully tuning the ink composition and deposition parameters. The power conversion efficiencies reached up to 19% for small laboratory solar cells and 15.2% for mini-modules, making them among the highest reported efficiencies for slot-die-coated perovskite.

ADVANCED MATERIALS INTERFACES (2021)

Article Energy & Fuels

One-Step Slot-Die Coating Deposition of Wide-Bandgap Perovskite Absorber for Highly Efficient Solar Cells

Sophie Bernard et al.

Summary: Slot-die coating offers precise control over thickness and material composition for large-area perovskite deposition and solar device fabrication; optimizing ink formulations and vacuum solvent extraction can improve film quality and device performance; techniques like introducing methylammonium chloride can enhance deposition efficiency and achieve higher power conversion efficiency.

SOLAR RRL (2021)

Article Chemistry, Physical

Influence of Drying Conditions on Device Performances of Antisolvent-Assisted Roll-to-Roll Slot Die-Coated Perovskite Solar Cells

Dong Seok Ham et al.

Summary: This study investigates the use of an antisolvent-assisted roll-to-roll slot die coating process to fabricate uniform perovskite layers for Perovskite solar cells. By optimizing processing parameters, the resulting PSCs showed a PCE of 9.68% with low charge recombination and high absorbance. Additionally, applying a triple-cation perovskite system to the R2R slot die coating process enabled a PCE of 13.41%, demonstrating the potential for commercialization of PSCs.

ACS APPLIED ENERGY MATERIALS (2021)

Review Multidisciplinary Sciences

Printing strategies for scaling-up perovskite solar cells

Yulong Wang et al.

Summary: This paper discusses the high power conversion efficiency and potential of metal halide perovskite solar cells, as well as the challenges and strategies for fabricating PSCs using printing techniques. The stability of perovskite solar modules is also analyzed, with implications for printable electronic devices.

NATIONAL SCIENCE REVIEW (2021)

Review Chemistry, Multidisciplinary

Passivation and process engineering approaches of halide perovskite films for high efficiency and stability perovskite solar cells

Abd. Rashid bin Mohd Yusoff et al.

Summary: The surface, interfaces, and grain boundaries of halide perovskite films play critical roles in achieving and maintaining high solar cell performance. Various defect engineering approaches are utilized to improve the efficiency and stability of perovskite solar cells, with a focus on passivating materials and process engineering techniques.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Physical

An in situ bifacial passivation strategy for flexible perovskite solar module with mechanical robustness by roll-to-roll fabrication

Hongyu Wang et al.

Summary: By soaking the NiOx-based hole transport layer in hydroiodic acid (HI) during R2R printing, an in situ bifacial passivation strategy was demonstrated to optimize the interface of perovskite solar cells, leading to improved power conversion efficiency and stability of the devices.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

Solution-Processed Transparent Electrodes for Emerging Thin-Film Solar Cells

Yaokang Zhang et al.

CHEMICAL REVIEWS (2020)

Article Materials Science, Multidisciplinary

Fully slot-die-coated perovskite solar cells in ambient condition

Luoyi Gao et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2020)

Article Materials Science, Multidisciplinary

Effect of Slit Channel Width of a Shim Embedded in Slot-Die Head on High-Density Stripe Coating for OLEDs

Dongkyun Shin et al.

COATINGS (2020)

Article Chemistry, Physical

Rapid Scalable Processing of Tin Oxide Transport Layers for Perovskite Solar Cells

Joel A. Smith et al.

ACS APPLIED ENERGY MATERIALS (2020)

Article Chemistry, Physical

Simple Method for Efficient Slot-Die Coating of MAPbI3 Perovskite Thin Films in Ambient Air Conditions

Anuja Vijayan et al.

ACS APPLIED ENERGY MATERIALS (2020)

Review Materials Science, Multidisciplinary

Roll-to-roll printing of polymer and perovskite solar cells: compatible materials and processes

Abhay Gusain et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Article Chemistry, Analytical

Cantilever Type Acceleration Sensors Made by Roll-to-Roll Slot-Die Coating

Sang Hoon Lee et al.

SENSORS (2020)

Article Chemistry, Multidisciplinary

Low-Temperature Processed TiOxElectron Transport Layer for Efficient Planar Perovskite Solar Cells

Md. Shahiduzzaman et al.

NANOMATERIALS (2020)

Review Chemistry, Multidisciplinary

Efficiency progress of inverted perovskite solar cells

Xuesong Lin et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Review Materials Science, Multidisciplinary

The compositional engineering of organic-inorganic hybrid perovskites for high-performance perovskite solar cells

Wenzhan Xu et al.

EMERGENT MATERIALS (2020)

Article Materials Science, Multidisciplinary

Towards industrialization of perovskite solar cells using slot die coating

Anand Verma et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Article Chemistry, Physical

Graphitic carbon nitride doped SnO2 enabling efficient perovskite solar cells with PCEs exceeding 22%

Jinbo Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Materials Science, Multidisciplinary

Recent progress towards roll-to-roll manufacturing of perovskite solar cells using slot-die processing

Hengyue Li et al.

FLEXIBLE AND PRINTED ELECTRONICS (2020)

Article Materials Science, Multidisciplinary

Scalable fabrication of organic solar cells based on non-fullerene acceptors

Anders S. Gertsen et al.

FLEXIBLE AND PRINTED ELECTRONICS (2020)

Review Engineering, Biomedical

Photo-curing 3D printing technique and its challenges

Haoyuan Quan et al.

BIOACTIVE MATERIALS (2020)

Article Chemistry, Physical

Wearable Power Source: A Newfangled Feasibility for Perovskite Photovoltaics

Xiaotian Hu et al.

ACS ENERGY LETTERS (2019)

Article Chemistry, Multidisciplinary

Overcoming Zinc Oxide Interface Instability with a Methylammonium-Free Perovskite for High-Performance Solar Cells

Kelly Schutt et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Materials Science, Multidisciplinary

Fully-printed, flexible cesium-doped triple cation perovskite photodetector

Sichao Tong et al.

APPLIED MATERIALS TODAY (2019)

Article Chemistry, Multidisciplinary

Large area electrolyte coating through surface and interface engineering in roll-to-roll slot-die coating process

Jongsu Lee et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

Review Chemistry, Multidisciplinary

Recent Advances in Flexible Perovskite Solar Cells: Fabrication and Applications

Dong Yang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Multidisciplinary

Encapsulation of Printable Mesoscopic Perovskite Solar Cells Enables High Temperature and Long-Term Outdoor Stability

Zhengyang Fu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Review Chemistry, Multidisciplinary

Imperfections and their passivation in halide perovskite solar cells

Bo Chen et al.

CHEMICAL SOCIETY REVIEWS (2019)

Article Chemistry, Physical

Scalable Processing of Low-Temperature TiO2 Nanoparticles for High-Efficiency Perovskite Solar Cells

Ihteaz M. Hossain et al.

ACS APPLIED ENERGY MATERIALS (2019)

Article Chemistry, Multidisciplinary

Bifacial stamping for high efficiency perovskite solar cells

Yong Zhang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Materials Science, Multidisciplinary

Meniscus Guide Slot-Die Coating For Roll-to-Roll Perovskite Solar Cells

Daniel Burkitt et al.

MRS ADVANCES (2019)

Article Materials Science, Multidisciplinary

Large area perovskite light-emitting diodes by gas-assisted crystallization

Vittal Prakasam et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Article Chemistry, Multidisciplinary

Acetonitrile based single step slot-die compatible perovskite ink for flexible photovoltaics

Daniel Burkitt et al.

RSC ADVANCES (2019)

Article Nanoscience & Nanotechnology

Slot-Die Coated Perovskite Films Using Mixed Lead Precursors for Highly Reproducible and Large-Area Solar Cells

Donmin Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Nanoscience & Nanotechnology

Beyond Fullerenes: Indacenodithiophene-Based Organic Charge-Transport Layer toward Upscaling of Low-Cost Perovskite Solar Cells

Dechan Angmo et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

Humidity-Induced Degradation via Grain Boundaries of HC(NH2)2PbI3 Planar Perovskite Solar Cells

Jae Sung Yun et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Review Chemistry, Multidisciplinary

Perovskite Solar Cells: From the Atomic Level to Film Quality and Device Performance

Michael Saliba et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Electrochemistry

Carbon based perovskite solar cells constructed by screen-printed components

Camellia Raminafshar et al.

ELECTROCHIMICA ACTA (2018)

Review Chemistry, Multidisciplinary

Recent advances in semi-transparent polymer and perovskite solar cells for power generating window applications

Qifan Xue et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Review Chemistry, Multidisciplinary

SnO2: A Wonderful Electron Transport Layer for Perovskite Solar Cells

Qi Jiang et al.

SMALL (2018)

Review Chemistry, Multidisciplinary

Methodologies toward Highly Efficient Perovskite Solar Cells

Sang Il Seok et al.

SMALL (2018)

Article Energy & Fuels

Slot die coated planar perovskite solar cells via blowing and heating assisted one step deposition

Jueng-Eun Kim et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Review Chemistry, Applied

Flexible perovskite solar cells based on green, continuous roll-to-roll printing technology

Wei Zi et al.

JOURNAL OF ENERGY CHEMISTRY (2018)

Article Chemistry, Physical

One-step roll-to-roll air processed high efficiency perovskite solar cells

Chuantian Zuo et al.

NANO ENERGY (2018)

Article Multidisciplinary Sciences

Perovskite solar cells in N-I-P structure with four slot-die-coated layers

Daniel Burkitt et al.

ROYAL SOCIETY OPEN SCIENCE (2018)

Review Nanoscience & Nanotechnology

Scalable fabrication of perovskite solar cells

Zhen Li et al.

NATURE REVIEWS MATERIALS (2018)

Review Chemistry, Multidisciplinary

Reduced Graphene Oxide as a Stabilizing Agent in Perovskite Solar Cells

Jovana V. Milic et al.

ADVANCED MATERIALS INTERFACES (2018)

Article Chemistry, Physical

Roll-to-Roll Printing of Perovskite Solar Cells

Benjia Dou et al.

ACS ENERGY LETTERS (2018)

Article Chemistry, Physical

Scalable slot-die coating of high performance perovskite solar cells

James B. Whitaker et al.

SUSTAINABLE ENERGY & FUELS (2018)

Article Energy & Fuels

Efficient flexible printed perovskite solar cells based on lead acetate precursor

Christina Kamaraki et al.

SOLAR ENERGY (2018)

Article Chemistry, Physical

Roll-to-Roll Slot Die Coated Perovskite for Efficient Flexible Solar Cells

Yulia Galagan et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Physical

Modified PEDOT Layer Makes a 1.52 V Voc for Perovskite/PCBM Solar Cells

Chuantian Zuo et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Multidisciplinary

Migration of cations induces reversible performance losses over day/night cycling in perovskite solar cells

Konrad Domanski et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Energy & Fuels

A universal roll-to-roll slot-die coating approach towards high-efficiency organic photovoltaics

Yu-Ching Huang et al.

PROGRESS IN PHOTOVOLTAICS (2017)

Article Energy & Fuels

One-step deposition by slot-die coating of mixed lead halide perovskite for photovoltaic applications

Giovanni Cotella et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

Article Chemistry, Physical

Large-Area, Highly Uniform Evaporated Formamidinium Lead Triiodide Thin Films for Solar Cells

Juliane Borchert et al.

ACS ENERGY LETTERS (2017)

Proceedings Paper Energy & Fuels

Research on hot spot risk for high-efficiency solar module

Shifeng Deng et al.

PROCEEDINGS OF THE SNEC 11TH INTERNATIONAL PHOTOVOLTAIC POWER GENERATION CONFERENCE & EXHIBITION (2017)

Article Nanoscience & Nanotechnology

One-Step Printable Perovskite Films Fabricated under Ambient Conditions for Efficient and Reproducible Solar Cells

Yen-Sook Jung et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Green & Sustainable Science & Technology

Classification conditions of cells to reduce cell-to-module conversion loss at the production stage of PV modules

Tae Hee Jung et al.

RENEWABLE ENERGY (2017)

Review Chemistry, Multidisciplinary

Organohalide Perovskites for Solar Energy Conversion

Qianqian Lin et al.

ACCOUNTS OF CHEMICAL RESEARCH (2016)

Article Chemistry, Multidisciplinary

Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells

Konrad Domanski et al.

ACS NANO (2016)

Review Engineering, Chemical

A Review of the Operating Limits in Slot Die Coating Processes

Xiaoyu Ding et al.

AICHE JOURNAL (2016)

Article Chemistry, Multidisciplinary

Stability Comparison of Perovskite Solar Cells Based on Zinc Oxide and Titania on Polymer Substrates

Yasmina Dkhissi et al.

CHEMSUSCHEM (2016)

Article Chemistry, Multidisciplinary

Soft-cover deposition of scaling-up uniform perovskite thin films for high cost-performance solar cells

Fei Ye et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide

Elham Halvani Anaraki et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Entropic stabilization of mixed A-cation ABX(3) metal halide perovskites for high performance perovskite solar cells

Chenyi Yi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Physical

Current Challenges and Prospective Research for Upscaling Hybrid Perovskite Photovoltaics

Spencer T. Williams et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)

Editorial Material Multidisciplinary Sciences

Print flexible solar cells

Yi-Bing Cheng et al.

NATURE (2016)

Article Multidisciplinary Sciences

Light-activated photocurrent degradation and self-healing in perovskite solar cells

Wanyi Nie et al.

NATURE COMMUNICATIONS (2016)

Review Engineering, Manufacturing

Roll-to-Roll Coating Technology and Its Applications: A Review

Janghoon Park et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)

Article Chemistry, Multidisciplinary

Vertical TiO2 Nanorods as a Medium for Stable and High-Efficiency Perovskite Solar Modules

Azhar Fakharuddin et al.

ACS NANO (2015)

Article Chemistry, Multidisciplinary

Toward Large Scale Roll-to-Roll Production of Fully Printed Perovskite Solar Cells

Kyeongil Hwang et al.

ADVANCED MATERIALS (2015)

Article Chemistry, Physical

Insight into Perovskite Solar Cells Based on SnO2 Compact Electron-Selective Layer

Qingshun Dong et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

Article Chemistry, Physical

Microstructures of Organometal Trihalide Perovskites for Solar Cells: Their Evolution from Solutions and Characterization

Yuanyuan Zhou et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Article Chemistry, Multidisciplinary

Crystallization Kinetics of Organic-Inorganic Trihalide Perovskites and the Role of the Lead Anion in Crystal Growth

David T. Moore et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Chemistry, Multidisciplinary

Low-Temperature Solution-Processed Tin Oxide as an Alternative Electron Transporting Layer for Efficient Perovskite Solar Cells

Weijun Ke et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Chemistry, Physical

Stability of Metal Halide Perovskite Solar Cells

Tomas Leijtens et al.

ADVANCED ENERGY MATERIALS (2015)

Article Chemistry, Physical

Rapid processing of perovskite solar cells in under 2.5 seconds

Joel Troughton et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Chemistry, Physical

Effect of different lead precursors on perovskite solar cell performance and stability

Fadi Kamal Aldibaja et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Chemistry, Multidisciplinary

Silver Iodide Formation in Methyl Ammonium Lead Iodide Perovskite Solar Cells with Silver Top Electrodes

Yuichi Kato et al.

ADVANCED MATERIALS INTERFACES (2015)

Review Chemistry, Multidisciplinary

Perovskite Solar Cells: From Materials to Devices

Hyun Suk Jung et al.

SMALL (2015)

Article Chemistry, Multidisciplinary

Morphological Control for High Performance, Solution-Processed Planar Heterojunction Perovskite Solar Cells

Giles E. Eperon et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Article Chemistry, Multidisciplinary

Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance

Wan-Jian Yin et al.

ADVANCED MATERIALS (2014)

Article Chemistry, Multidisciplinary

Mixed-Organic-Cation Perovskite Photovoltaics for Enhanced Solar-Light Harvesting

Norman Pellet et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Article Physics, Applied

Moisture assisted perovskite film growth for high performance solar cells

Jingbi You et al.

APPLIED PHYSICS LETTERS (2014)

Article Chemistry, Multidisciplinary

Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells

Giles E. Eperon et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Physical

Organometallic Halide Perovskites: Sharp Optical Absorption Edge and Its Relation to Photovoltaic Performance

Stefaan De Wolf et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Article Chemistry, Multidisciplinary

General Working Principles of CH3NH3PbX3 Perovskite Solar Cells

Victoria Gonzalez-Pedro et al.

NANO LETTERS (2014)

Article Computer Science, Interdisciplinary Applications

Optimized design for anti-reflection coating process in roll-to-roll slot-die coating system

Janghoon Park et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2014)

Article Multidisciplinary Sciences

Excitons versus free charges in organo-lead tri-halide perovskites

Valerio D'Innocenzo et al.

NATURE COMMUNICATIONS (2014)

Article Nanoscience & Nanotechnology

Impact of the organic halide salt on final perovskite composition for photovoltaic applications

David T. Moore et al.

APL MATERIALS (2014)

Article Chemistry, Multidisciplinary

CH3NH3PbI3 Perovskite/Fullerene Planar-Heterojunction Hybrid Solar Cells

Jun-Yuan Jeng et al.

ADVANCED MATERIALS (2013)

Review Polymer Science

Roll-to-Roll fabrication of large area functional organic materials

Roar R. Sondergaard et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2013)

Article Multidisciplinary Sciences

Sequential deposition as a route to high-performance perovskite-sensitized solar cells

Julian Burschka et al.

NATURE (2013)

Article Multidisciplinary Sciences

Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH3NH3PbI3

Guichuan Xing et al.

SCIENCE (2013)

Article Energy & Fuels

Slot-die coating parameters of the low-viscosity bulk-heterojunction materials used for polymer solar cells

Soonil Hong et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)

Article Multidisciplinary Sciences

Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates

Pablo Docampo et al.

NATURE COMMUNICATIONS (2013)

Article Mechanics

Delaying the onset of dynamic wetting failure through meniscus confinement

Eric Vandre et al.

JOURNAL OF FLUID MECHANICS (2012)

Article Chemistry, Multidisciplinary

Mesoscopic CH3NH3PbI3/TiO2 Heterojunction Solar Cells

Lioz Etgar et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Review Materials Science, Multidisciplinary

Roll-to-roll fabrication of polymer solar cells

Roar Sondergaard et al.

MATERIALS TODAY (2012)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Review Energy & Fuels

Fabrication and processing of polymer solar cells: A review of printing and coating techniques

Frederik C. Krebs

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)

Article Engineering, Chemical

Comparison of vertical and horizontal slot die coatings

Hsien-Ming Chang et al.

POLYMER ENGINEERING AND SCIENCE (2007)

Article Mechanics

Slot coating of mildly viscoelastic liquids

O. J. Romero et al.

JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2006)