☆ 4.7 Article

Wet-chemical surface texturing of AZO substrate for improved perovskite solar cells

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Effect of Substrate Temperature on Photoelectric Properties of AZO Thin Films

Yanfang Zhao et al.

Summary: In this study, Al-doped ZnO thin films were deposited on quartz glass substrates using RF magnetron sputtering. The effects of substrate temperature on the structure, morphology, electrical, and optical properties of the films were investigated. It was found that the Al doping did not change the structure of the ZnO films, which exhibited a hexagonal wurtzite structure with preferred c-axis orientation. The films showed optimal properties at a substrate temperature of 150 degrees C, including good electrical conductivity and high transmittance in the visible light region.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2023)

Add to Collection

Article Energy & Fuels

Solar cell efficiency tables (Version 61)

Martin A. Green et al.

Summary: This article presents consolidated tables that provide an extensive listing of the highest independently confirmed efficiencies for solar cells and modules. It outlines the guidelines for including results into these tables and reviews new entries since July 2022. The article also includes graphs showing the progress of each cell technology over the past 30 years and an updated list of designated test centers.

PROGRESS IN PHOTOVOLTAICS (2023)

Add to Collection

Review Chemistry, Multidisciplinary

The effect of B-site doping in all-inorganic CsPbIxBr3-x absorbers on the performance and stability of perovskite photovoltaics

Erdi Akman et al.

Summary: This review provides an overview of the B-site doping strategy in inorganic CsPbIxBr3-x perovskite thin films, which involves the incorporation of various B-site elements to passivate defects, tune grain orientation, and enhance charge-carrier lifetime, aiming to address the poor phase stability of inorganic perovskites.

ENERGY & ENVIRONMENTAL SCIENCE (2023)

Add to Collection

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Add to Collection

Article Chemistry, Applied

Enlarging grain sizes for efficient perovskite solar cells by methylamine chloride assisted recrystallization

Gao Wu et al.

Summary: The quality of MAPbI(3) film is significantly improved by a simple methylamine chloride (MACl) solution treatment, leading to larger perovskite crystal grain sizes and enhanced cell efficiency and stability.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Energy & Fuels

Quinary Nanocrystal-Based Passivation Strategy for High Efficiency and Stable Perovskite Photovoltaics

Teoman Ozturk et al.

Summary: By using quinary kesterite nanocrystals as passivation agents, defect states at the grain boundaries of perovskite films are greatly reduced, promoting continuity between adjacent grains and improving hole transport ability while suppressing interfacial recombination. This approach has led to high efficiency and excellent stability in perovskite solar cells.

SOLAR RRL (2022)

Add to Collection

Article Engineering, Environmental

Interface modification to achieve high-efficiency and stable perovskite solar cells

Yinghui Wu et al.

Summary: Organic-inorganic hybrid perovskite solar cells have achieved relatively high power conversion efficiencies in recent years. However, defects in the perovskite layers are critical to the performance of the devices. By passivating the interface defects, the efficiency and stability of the perovskite solar cells can be significantly improved.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Highly efficient (200) oriented MAPbI3 perovskite solar cells

Ruixue Lu et al.

Summary: This study successfully fabricated tetragonal (200) oriented MAPbI(3) films and compared them with traditional (110) oriented films. The results showed that tetragonal (200) oriented films had larger crystal grain size, lower trap density, and better charge transfer properties. MAPbI(3) PSCs based on tetragonal (200) oriented films achieved a record efficiency of 20.22%.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Atomic Layer Engineering of Aluminum-Doped Zinc Oxide Films for Efficient and Stable Perovskite Solar Cells

Joanna Kruszynska et al.

Summary: This study investigated the impact of using different deposition sequences in the ALD process of aluminum-doped zinc oxide films on the performance and stability of PSCs. Results showed that AZO-2 significantly enhances the thermal stability of the upcoming MAPbI(3) layer and facilitates charge transport. PSCs with AZO-2 layer exhibited high efficiency and stability under ambient conditions.

ADVANCED MATERIALS INTERFACES (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Facile NaF Treatment Achieves 20% Efficient ETL-Free Perovskite Solar Cells

Faranak Sadegh et al.

Summary: In this study, sodium fluoride (NaF) was introduced as an interface layer in ETL-free perovskite solar cells (PSCs) to improve the energy level alignment and reduce charge recombination. The NaF layer effectively covered the rough FTO surface and reduced the work function, facilitating electron carrier collection. Additionally, some Na+ ions migrated into the absorber layer, leading to larger grains and passivation of the perovskite layer. The NaF-treated cells achieved an efficiency of 20% and maintained 94% of the initial efficiency after 500 hours of light soaking at 55 degrees C, indicating enhanced interface passivation.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Performance Enhancement of All-Inorganic Carbon-Based CsPbIBr2 Perovskite Solar Cells Using a Moth-Eye Anti-Reflector

Wensheng Lan et al.

Summary: The use of moth-eye anti-reflector on PSCs improved J(SC) and PCE, further enhancing the performance of CsPbIBr2 perovskite solar cells.

NANOMATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Application of Indium Tin Oxide/Aluminum-Doped Zinc Oxide Transparent Conductive Oxide Stack Films in Silicon Heterojunction Solar Cells

Jianqiang Wang et al.

Summary: This study compared different transparent conductive oxide structures for solar cells and found that with careful control of deposition conditions, certain structures could effectively improve the performance of solar cells.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Enhancing the optical, morphological and electronic properties of the solution-processed CsPbIBr2 films by Li doping for efficient carbon-based perovskite solar cells

Xianhua Tan et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Coordinated Optical Matching of a Texture Interface Made from Demixing Blended Polymers for High-Performance Inverted Perovskite Solar Cells

Cun Yun Xu et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic Interface Energy Band Alignment Optimization and Defect Passivation toward Efficient and Simple-Structured Perovskite Solar Cell

Like Huang et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Room-Temperature Sputtered Aluminum-Doped Zinc Oxide for Semitransparent Perovskite Solar Cells

Nan Li et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

MXene-Modulated Electrode/SnO2 Interface Boosting Charge Transport in Perovskite Solar Cells

Yunfan Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Highly-improved performance of inverted planar perovskite solar cells by glucose modification

Yunxin Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Dominant effect of the grain size of the MAPbI3 perovskite controlled by the surface roughness of TiO2 on the performance of perovskite solar cells

Methawee Nukunudompanich et al.

CRYSTENGCOMM (2020)

Add to Collection

Article Chemistry, Physical

Power output stabilizing feature in perovskite solar cells at operating condition: Selective contact-dependent charge recombination dynamics

Hui-Seon Kim et al.

NANO ENERGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Ultrahydrophobic 3D/2D fluoroarene bilayer-based water-resistant perovskite solar cells with efficiencies exceeding 22%

Yuhang Liu et al.

SCIENCE ADVANCES (2019)

Add to Collection

Article Chemistry, Physical

Enhanced thermal stability of electron transport layer-free perovskite solar cells via interface strain releasing

Peng Zhang et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Using the light scattering properties of multi-textured AZO films on inverted hemisphere textured glass surface morphologies to improve the efficiency of silicon thin film solar cells

Shahzada Qamar Hussain et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Energy & Fuels

Vapor textured aluminum-doped zinc oxide on cellophane paper for flexible thin film solar cells

Weiyan Wang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Add to Collection

Article Multidisciplinary Sciences

High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2

Dong Yang et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Cost-Performance Analysis of Perovskite Solar Modules

Molang Cai et al.

ADVANCED SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Increased Efficiency for Perovskite Photovoltaics Based on Aluminum-Doped Zinc Oxide Transparent Electrodes via Surface Modification

Xiaoli Li et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Energy & Fuels

Enhanced light absorption of thin perovskite solar cells using textured substrates

Biao Shi et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Performance in Al-Doped ZnO Based Transparent Flexible Transparent Thin-Film Transistors Due to Oxygen Vacancy in ZnO Film with Zn-Al-O Interfaces Fabricated by Atomic Layer Deposition

Yang Li et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

An Indium-Free Anode for Large-Area Flexible OLEDs: Defect-Free Transparent Conductive Zinc Tin Oxide

Monica Morales-Masis et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Improved Performance and Reliability of p-i-n Perovskite Solar Cells via Doped Metal Oxides

Achilleas Savva et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Dramatically promoted crystallization control of organolead triiodide perovskite film by a homogeneous cap for high efficiency planar-heterojunction solar cells

Weidong Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Chemistry, Physical

Organic-acid texturing of transparent electrodes toward broadband light trapping in thin-film solar cells

Woojin Lee et al.

NANO ENERGY (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Optical, electrical and structural properties of aluminum-doped nano-zinc oxide thin films deposited by magnetron sputtering

Jin Hua Gu et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2015)

Add to Collection

Article Chemistry, Physical

High-Performance Planar-Heterojunction Solar Cells Based on Ternary Halide Large-Band-Gap Perovskites

Po-Wei Liang et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.