☆ 4.7 Article

Shuttle-inhibited 3D sandwich MXene/SnO2QDs sulfur host for high- performance lithium-sulfur batteries

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Vanadium dioxide plates reduced graphene oxide as sulfur cathodes for efficient polysulfides trap in long-life lithium-sulfur batteries

Bing Chen et al.

Summary: Lithium-sulfur (Li-S) batteries face challenges due to the solubility of polysulfides and insulating properties of elemental sulfur. In this study, graphene decorated with vanadium dioxide (VO2) plates was utilized as a cathode matrix to address these challenges. The results showed that the synthesized VO2/rGO/S composites exhibited high discharge capacity and stable cycling performance. This research opens up new possibilities for the development of long-life batteries.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Freestanding Ti3C2Tx MXene/Prussian Blue Analogues Films with Superior Ion Uptake for Efficient Capacitive Deionization by a Dual Pseudocapacitance Effect

Shiyong Wang et al.

Summary: This study explores high-performance Faradaic electrode materials by preparing MXene/PBAs films, which exhibit superior desalination capacity and rate due to the synergistic effect of MXene nanosheets and PBAs nanoparticles.

ACS NANO (2022)

Add to Collection

Article Engineering, Environmental

Covalently grafting conjugated porous polymers to MXene offers a two-dimensional sandwich-structured electrocatalytic sulfur host for lithium-sulfur batteries

Yawen Cao et al.

Summary: A two-dimensional sandwich structure electrocatalytic sulfur host is synthesized by grafting a conjugated microporous polymer to MXene nanosheets, which offers chemisorption sites to capture various polysulfides and accelerates their conversion. Lithium-sulfur (Li-S) batteries using this sulfur host exhibit high specific capacity, outstanding rate capability, and low capacity decay. This methodology provides a universal approach for constructing electrocatalytic 2D composites that can be used not only in Li-S batteries but also in other contemporary energy technologies.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Environmental Sciences

The role of lateral size of MXene nanosheets in membrane filtration of dyeing wastewater: Membrane characteristic and performance

Jing Xiang et al.

Summary: The influence of the lateral size of MXene nanosheets on the performance of MXene membranes was investigated. It was found that MXene(S)-M membrane with the smallest lateral size exhibited the largest surface roughness and reduced surface hydrophilicity, resulting in the highest water permeance due to its shortest mass transfer pathway. On the other hand, MXene(L)-M and MXene(M)-M membranes with larger lateral size promoted higher dye rejection due to their longer mass transport pathway.

CHEMOSPHERE (2022)

Add to Collection

Article Energy & Fuels

Electrochemical properties of sulfur-carbon hollow nanospheres with varied polar titanium oxide layer location for lithium-sulfur batteries

Gi Dae Park et al.

Summary: Porous and graphitic carbon materials are actively studied for Li-S batteries. However, the dissolution of lithium polysulfides in the electrolyte is a problem. This study proposes a strategy of depositing ultrafine TiOx nanodots on active sulfur embedded within hollow porous carbon nanospheres to form a polar coating layer, which effectively blocks the diffusion of soluble polysulfides.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

Confined Co9S8 nanocrystals into N/S-Co-doped carbon nanofibers as a chainmail-like electrocatalyst for high-performance lithium-sulfur batteries with high sulfur loading

Wei Zhou et al.

Summary: The preparation of sulfiphilic ultrafine Co9S8 nanoparticles embedded lithiophilic N, S co-doping carbon nanofibers improves the stability and electrochemical performance of lithium-sulfur batteries.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Engineering, Chemical

Largely enhanced adsorption performance and stability of MXene through in-situ depositing polypyrrole nanoparticles

Xian-ying Shi et al.

Summary: In this study, MXene/PPy composite particles were prepared, and it was found that the introduction of PPy nanoparticles can enhance the adsorption capacity and stability of MXene, showing promising potential applications in wastewater treatment.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Super-Tough and Environmentally Stable Aramid Nanofiber@MXene Coaxial Fibers with Outstanding Electromagnetic Interference Shielding Efficiency

Liu-Xin Liu et al.

Summary: In this study, highly conductive, super-tough, ultra-strong, and environmentally stable Ti3C2Tx MXene-based core-shell fibers were successfully fabricated using a core-shell wet-spinning method, showing great potential for various applications.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Building flexibly porous conductive skeleton inlaid with surface oxygen-dominated MXene as an amphiphilic nanoreactor for stable Li-S pouch batteries

Yusen He et al.

Summary: In this study, a porous carbon nanofiber with an oxygen-dominated Ti3C2 MXene nanosheet (O-Ti3C2@CNF) was designed and synthesized as an all-purpose interlayer for lithium-sulfur (Li-S) batteries. By controllable surface modifications and oxygen regulation, the O-Ti3C2@CNF exhibited strong physical/chemical affinity and fast reaction kinetics towards sulfur species. The interlayer enabled high-flux lithium diffusion and dendrite-free lithium anode. A practical, flexible Li-S pouch battery with excellent areal capacity was assembled using the symmetric interlayer design.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Materials Science, Ceramics

V2O5 plates anchored in CNTS composite materials with a network structure as polysulfide capture for lithium-sulfur battery

Bing Chen et al.

Summary: Researchers prepared a carbon nanotubes/V2O5/S material as the host material for lithium-sulfur batteries, which solves the challenges faced by these batteries and has high specific capacity and environmental friendliness.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

MXene-Graphene Composites: A Perspective on Biomedical Potentials

Ebrahim Mostafavi et al.

Summary: MXenes and graphene, as promising two-dimensional materials, have unique physicochemical properties that make them suitable for future biomedical applications. Their hybrid/composite structure can meet the high-performance requirements in medicine and biomedical engineering. However, more research is needed on the hybridization, surface functionalization, and toxicological effects, as well as clinical translation evaluations. Overall, the MXene-graphene composites have the potential to open up new horizons in healthcare and medicine.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Chemistry, Applied

Notes in accordions-organized MXene equipped with CeO2 for synergistically adsorbing and catalyzing polysulfides for high-performance lithium-sulfur batteries

Xiaochuan Chen et al.

Summary: Based on MXene, CeO2/MXene was prepared as a cathode material for lithium-sulfur batteries in this study. The introduction of CeO2 and metal adsorbent successfully improved the discharge capacity and cycle stability. The results indicate the great potential of CeO2/MXene for lithium-sulfur batteries.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Engineering, Environmental

Preparation of Fe3O4/FexSy heterostructures via electrochemical deposition method and their enhanced electrochemical performance for lithium-sulfur batteries

Xin Li et al.

Summary: In this study, Fe3O4/FexSy heterostructures were prepared using electrochemical deposition and thermal annealing methods. The folded tubular heterostructures showed improved performance in Li-S batteries by increasing sulfur loading and enhancing Li-ion diffusion rate. The Li-S batteries exhibited excellent stability over 500 cycles at 0.5 C.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Perovskite transition metal oxide of nanofibers as catalytic hosts for lithium-sulfur battery

Binwei He et al.

Summary: This study introduces a method of using perovskite transition metal oxide LaFeO3 as a host material in the sulfur cathode, which has high tap density and excellent electrical conductivity. LaFeO3 nanofibers prepared by electrospinning not only have remarkable electron and ion-conducting networks, but also exhibit excellent chemical adsorption and catalytic activities for soluble lithium polysulfides. As a result, the sulfur/LaFeO3 composite shows a low capacity decay rate and a high initial discharge capacity, providing a promising strategy for high-performance Li-S batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Engineering, Environmental

Sandwich-Structured flexible interlayer with Co3O4 nanoboxes strung along carbon nanofibers on both sides for fast Li plus transport and high redox activity in High-Rate Li-S batteries

Jiao Guo et al.

Summary: The conductivity and Li+ transfer of Co3O4 nanoboxes can be significantly improved by running conductive carbon nanofiber wires through them. The designed membrane with intertwined carbon nanofibers as flexible conductive support and additional active sites effectively suppresses the shuttle effect and improves high-rate performance and cycling stability.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Hierarchically porous nanofibers comprising multiple core-shell Co3O4@graphitic carbon nanoparticles grafted within N-doped CNTs as functional interlayers for excellent Li-S batteries

Rakesh Saroha et al.

Summary: The hierarchically porous nanofibers with multiple core-shell Co3O4@graphitic carbon nanoparticles grafted within N-doped carbon nanotubes were designed as functional interlayers for improved Li-S batteries. The combination of N-CNTs, GC layer, and polar Co3O4 nanoparticles effectively trapped polysulfides, leading to excellent electrochemical performance in terms of high-rate capability and stable cycling performance.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Progress and Perspective: MXene and MXene-Based Nanomaterials for High-Performance Energy Storage Devices

Xiaodan Xu et al.

Summary: MXene, a family of 2D transition metal carbides/nitride, has shown extraordinary electrical conductivity, mechanical stability, and energy-storage capability. Research progress on its preparation strategies, properties, and applications in various energy storage devices has been summarized, offering insights for further enhancing their electrochemical performances.

ADVANCED ELECTRONIC MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

MoP QDs@graphene as highly efficient electrocatalyst for polysulfide conversion in Li-S batteries

Bo Yu et al.

Summary: The study presents MoP quantum dots anchored N, P-doped graphene as a multifunctional cathode for lithium-sulfur batteries, which accelerates electron transfer and provides catalytically active sites, enhancing electrochemical performance and cycling stability.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Lithium-Sulfur Battery Cathode Design: Tailoring Metal-Based Nanostructures for Robust Polysulfide Adsorption and Catalytic Conversion

Sue-Faye Ng et al.

Summary: Lithium-sulfur (Li-S) batteries have high specific energy capacity and density, making them promising successors to lithium-ion batteries. However, obstacles such as low sulfur conductivity and volume expansion of sulfur electrodes have led to research focusing on metal-based compounds to address issues like the polysulfide shuttle effect. The review highlights the need for smart catalyst design to overcome challenges in the practical application and commercialization of Li-S batteries.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

MXene-Derived TinO2n-1 Quantum Dots Distributed on Porous Carbon Nanosheets for Stable and Long-Life Li-S Batteries: Enhanced Polysulfide Mediation via Defect Engineering

Heng Zhang et al.

Summary: An effective strategy was developed to confine and promote the conversion of polysulfides by decorating oxygen-vacancy-rich SnO2n-1 quantum dots on porous carbon nanosheets. Using Ti3C2Tx MXene as starting materials, the design enhances the immobilization and conversion of polysulfides, providing high S loading, good rate capability, and excellent long-term cyclability.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Concurrent realization of dendrite-free anode and high-loading cathode via 3D printed N-Ti3C2 MXene framework toward advanced Li-S full batteries

Chaohui Wei et al.

Summary: A multifunctional 3D printed framework comprising nitrogen-doped porous Ti3C2MXene is proposed to regulate both electrodes of Li-S batteries. The framework possesses high conductivity and ample nitrogen sites for synergizing lithiophilic-sulfiphilic feature.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Polysulfide Filter and Dendrite Inhibitor: Highly Graphitized Wood Framework Inhibits Polysulfide Shuttle and Lithium Dendrites in Li-S Batteries

Yuanzhen Chen et al.

Summary: The study introduces a highly graphitized wood framework (GWF) as a multifunctional interlayer to enhance the performance of Li-S batteries, providing increased deposition sites for polysulfides and protecting lithium anodes from corrosion. The design of new materials offers new opportunities to address technological challenges.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Engineering, Chemical

Three-dimensional architectures based on carbon nanotube bridged Ti2C MXene nanosheets for Li-S batteries

Qinhua Gu et al.

Summary: The article presents a three-dimensional architecture based on carbon nanotube bridged Ti2C MXene nanosheets as a sulfur host, effectively alleviating the shuttle effect of polysulfides and promoting the electrochemical conversion of polysulfides in Li-S batteries.

PARTICUOLOGY (2021)

Add to Collection

Article Chemistry, Physical

A composite of CoNiP quantum dot-decorated reduced graphene oxide as a sulfur host for Li-S batteries

Tingjiao Xiao et al.

Summary: A new sulfur host material CoNiP-rGO was designed and prepared, showing high capacity and cycle stability. This study provides a promising method for improving the performance of Li-S batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical Defective Fe3-xC@C Hollow Microsphere Enables Fast and Long-Lasting Lithium-Sulfur Batteries

Yongguang Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Self-assembled sandwich hollow porous carbon sphere @ MXene composites as superior LiS battery cathode hosts

Qi Qi et al.

2D MATERIALS (2020)

Add to Collection

Article Chemistry, Applied

A multi-functional binder for high loading sulfur cathode

Ying Chu et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Three-dimensionally ordered macro-microporous metal organic frameworks with strong sulfur immobilization and catalyzation for high-performance lithium-sulfur batteries

Guoliang Cui et al.

NANO ENERGY (2020)

Add to Collection

Article Energy & Fuels

MoS2 Confined MXene Heterostructures as Electrode Material for Energy Storage Application

Mijun Chandran et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Incorporation ZnS quantum dots into carbon nanotubes for high-performance lithium-sulfur batteries

Tianyu Shi et al.

NANOTECHNOLOGY (2020)

Add to Collection

Article Chemistry, Applied

Bronze TiO2 as a cathode host for lithium-sulfur batteries

Wenjing Dong et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Lightweight Three-Dimensional Cellular MXene Film for Superior Energy Storage and Electromagnetic Interference Shielding

Zhimin Fan et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

A novel wheel-confined composite as cathode in Li-S batteries with high capacity retention

Ping Zhou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Conductive CoOOH as Carbon-Free Sulfur Immobilizer to Fabricate Sulfur-Based Composite for Lithium-Sulfur Battery

Zhen-Yu Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Plasmonic MXene-based nanocomposites exhibiting photothermal therapeutic effects with lower acute toxicity than pure MXene

Essraa A. Hussein et al.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2019)

Add to Collection

Article Chemistry, Physical

Sulfur-impregnated disordered SnO2/carbon aerogel core-shell microspheres cathode for lithium-sulfur batteries

Meili Qi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Aerosol-assisted synthesis of porous and hollow carbon-carbon nanotube composite microspheres as sulfur host materials for high-performance Li-S batteries

Gi Dae Park et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Electrochemistry

MoS2 quantum dots decorated reduced graphene oxide as a sulfur host for advanced lithium-sulfur batteries

Hao Wei et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

Graphene-Based Mesoporous SnO2 Nanosheets as Multifunctional Hosts for High-Performance Lithium-Sulfur Batteries

Shengtang Liu et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Self-Assembly of Transition Metal Oxide Nanostructures on MXene Nanosheets for Fast and Stable Lithium Storage

Yi-Tao Liu et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Engineering, Environmental

Ultrafine and polar ZrO2-inlaid porous nitrogen-doped carbon nanofiber as efficient polysulfide absorbent for high-performance lithium-sulfur batteries with long lifespan

Ya Li et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Chemistry, Physical

Porous three-dimensional reduced graphene oxide for high-performance lithium-sulfur batteries

Yongguang Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Controlled Crumpling of Two-Dimensional Titanium Carbide (MXene) for Highly Stretchable, Bendable, Efficient Supercapacitors

Ting-Hsiang Chang et al.

ACS NANO (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Revisiting Scientific Issues for Industrial Applications of Lithium-Sulfur Batteries

Bo Liu et al.

ENERGY & ENVIRONMENTAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Three-dimensionally ordered macro-/mesoporous carbon loading sulfur as high-performance cathodes for lithium/sulfur batteries

Chengwei Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Physical

Polymer-Capped Sulfur Copolymers as Lithium-Sulfur Battery Cathode: Enhanced Performance by Combined Contributions of Physical and Chemical Confinements

Shuaibo Zeng et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Chemistry, Physical

X-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)

Joseph Halim et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Rechargeable Lithium-Sulfur Batteries

Arumugam Manthiram et al.

CHEMICAL REVIEWS (2014)

Add to Collection

Article Chemistry, Physical

High-performance tin oxide-nitrogen doped graphene aerogel hybrids as anode materials for lithium-ion batteries

Chunhui Tan et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

Advances in Li-S batteries

Xiulei Ji et al.

JOURNAL OF MATERIALS CHEMISTRY (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.