☆ 4.7 Article

Nano SnO2 loaded on N-doped carbon nanorods derived from metal- complex covalent organic frameworks for anode in lithium ion batteries

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

N-doped carbon coated Ga2O3 nanotubes as anode materials for Li-ion battery to achieve superior performance

Jie Yang et al.

Summary: In this study, Ga2O3 nanotubes coated with N-doped carbon layers were prepared using MoO3 nanorods as sacrificial templates followed by a poly-dopamine coating and heat treatment process. The resulting tubular structure provided cavities for volume changes of the Ga2O3 and shortened the migration path of Li ions and electrons, leading to improved cycling stability and rate performance of the battery.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Chemistry, Physical

Efficient photocatalytic hydrogen evolution: Linkage units engineering in triazine-based conjugated porous polymers

Shengling Zhang et al.

Summary: Two novel conjugated porous polymers (CPPs) with pyrene and 1,3,5-triazine building blocks were synthesized. Structural changes in the peripheral groups of the triazine units greatly affected the photocatalytic activity of the polymers. The catalyst containing thiophene-triazine (ThPy-CPP) showed a much higher photocatalytic hydrogen evolution rate than the one containing phenyl-triazine (PhPy-CPP), indicating a promising direction for designing efficient CPP-based photocatalysts.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Lithiophilic N-doped carbon bowls induced Li deposition in layered graphene film for advanced lithium metal batteries

Xiaoyu Feng et al.

Summary: Our research demonstrates a highly stable and dendrite-free Li metal anode achieved by using N-doped hard carbon/reduced graphene nano sheets as a 3D conductive and lithiophilic scaffold host. The lithiophilic carbon bowl acts as an excellent guide during Li plating, while the high conductivity and mechanical stability of the rGO layer maintain the integrity of the composite, resulting in low lithium metal nucleation overpotential and high Coulombic efficiency.

NANO RESEARCH (2022)

Add to Collection

Article Engineering, Chemical

Selective and efficient removal of radioactive ions from water with well-dispersed metal oxide nanoparticles@N-doped carbon

Zhimin Lv et al.

Summary: This paper proposes a COF-absorption-pyrolysis strategy to confine MgO NPs in COF-derived N-doped porous carbon matrix, aiming to treat heavy metals and organic pollutants in wastewater. The experimental results demonstrate that COF-derived MgO@NCt exhibits an efficient removal capacity for U(VI), which can be restored by pyrolyzing.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

The fabrication of hierarchical porous nano-SnO2@carbon@humic acid ternary composite for enhanced capacity and stability as anode material for lithium ion battery

Huiqian Yang et al.

Summary: High-performance SnO2 @C@HA ternary anode material was successfully fabricated by microwave-assisted hydrothermal and subsequent calcination process in the presence of humic acid (HA) and super P. The addition of HA improved the dispersibility and specific surface area of the composite, resulting in high retention capacity during charge-discharge cycling.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Porous Fe2O3 Nanoparticles as Lithium-Ion Battery Anode Materials

Chi Zhang et al.

Summary: Fe2O3 nanoparticles with multicavity structures were successfully synthesized using a microwave-assisted-template method, showing excellent electrochemical performance when used as anode materials for lithium-ion batteries. The unique advantages of nanomaterials, high surface area, and large pore volume contribute to the improved movement of electrolyte and reduced resistance in Fe2O3-MW-4h nanoparticles.

ACS APPLIED NANO MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Highly efficient Co3O4/CeO2 heterostructure as anode for lithium-ion batteries

Ying Kang et al.

Summary: A Co3O4/CeO2 heterostructure derived from metal-organic frameworks was designed and synthesized through one-step microwave synthesis to address the issues of large volume change and low electric conductivity of Co3O4 in lithium-ion batteries. This novel strategy utilizing rare earth components showed high reversible capacity and excellent cycling stability when used as an anode material for LIBs.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Orderly stacked graphene sheets supporting SnO2 nanoparticles as an anode material for lithium-ion batteries with incremental capacity

Dongdong Liu et al.

Summary: The study introduces a hybrid structure of SnO2@OS-rGO constructed by freeze casting method, where orderly stacked graphene supports SnO2 anodes to enhance discharge capacity and cycling stability. The ordered graphene also improves reaction kinetics by shortening the transmission path of lithium ions.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Electrochemistry

Ultrasmall SnO2 directly grown on commercial C45 carbon as lithium-ion battery anodes for long cycling performance

Daniele Versaci et al.

Summary: The use of C-NERGY(TM) Super C45 carbon black surface functional groups for one-pot synthesis of ultrafine SnO2 nanoparticles shows promising results in enhancing battery cycling stability and capacity performance.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Analytical

In situ-formed nitrogen-doped carbon/silicon-based materials as negative electrodes for lithium-ion batteries

Ivonne E. Monje et al.

Summary: This study reports on the electrochemical evaluation of nitrogen-doped carbon/SiOC materials synthesized in situ. By adjusting the synthesis conditions appropriately, spherical NC/SiOC composite electrodes with superior performance compared to traditional graphite can be obtained.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Nitrogen-doped carbon encapsulated zinc vanadate polyhedron engineered from a metal-organic framework as a stable anode for alkali ion batteries

Yixing Fang et al.

Summary: In this study, vanadium/zinc metal-organic frameworks were fabricated to disperse ultrasmall Zn2VO4 nanoparticles and encapsulate them in a nitrogen-doped nanocarbon network. The resulting material, ZVO/NC, demonstrated high reversible capacity and excellent rate performance in lithium-ion batteries, long-term cycling stability in sodium-ion batteries, and outstanding electrochemical performance in potassium-ion batteries. The mechanism by which ZVO/NC enhances battery performance was investigated, offering valuable insights for the development of anodes for alkali ion batteries.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Ionic liquid-induced ultrathin and uniform N-doped carbon-wrapped T-Nb2O5 microsphere anode for high-performance lithium-ion battery

Rui-Xue Sun et al.

Summary: An ultrathin N-doped carbon-coating layer was constructed on porous T-Nb2O5 microspheres, which significantly enhanced the rate capability and cycle life of the material, while ensuring fast Li+ diffusion dynamics and electrolyte penetration. The synthesized material also performed well in a full cell, demonstrating potential applications in lithium-ion batteries.

RARE METALS (2021)

Add to Collection

Article Materials Science, Ceramics

Synthesis of SnO2@MnO2@graphite nanosheet with high reversibility and stable structure as a high-performance anode material for lithium-ion batteries

Wenrui Li et al.

Summary: In this study, the prepared SnO2@MnO2@graphite (SMG) anode material exhibited superior reversible capacity, ideal rate capability, and stable long-life cyclic performance, indicating great potential in enhancing the performance of SnO2-based anode for battery applications.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Engineering, Environmental

Template-free fabrication of MoP nanoparticles encapsulated in N-doped hollow carbon spheres for efficient alkaline hydrogen evolution

Jin Li et al.

Summary: Encapsulating transition metal phosphides into nitrogen-doped carbon materials is an effective strategy to enhance electrocatalytic performance. The synthesized MoP@NC hollow microspheres show excellent performance in alkaline hydrogen evolution reaction, attributed to their distinctive structure, high nitrogen-doping level, and synergistic effect between MoP and NC. Theoretical calculations suggest that the active sites of the catalyst mainly lie at Mo atoms adjacent to pyridinic N-doped carbon layer, and the interaction between MoP and pyridinic N atoms contributes to the enhanced HER performance.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Metal-bipyridine/phenanthroline-functionalized porous crystalline materials: Synthesis and catalysis

Xiao Feng et al.

Summary: The article reviews the recent research progress of M(bpy)/M(phen)-functionalized metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), focusing on the synthetic strategies of these porous materials and their catalytic performances in thermocatalysis, photocatalysis and electrocatalysis.

COORDINATION CHEMISTRY REVIEWS (2021)

Add to Collection

Article Chemistry, Physical

Facile fabrication of three-dimensional porous carbon embedded with SnO2 nanoparticles as a high-performance anode for lithium-ion battery

Yayi Cheng et al.

Summary: A simple method of fabricating three-dimensional porous carbon through freeze drying and organic calcination was reported. The resulting SnO2/C composite, with SnO2 nanoparticles chemically bonded on the carbon surface, showed superior electrochemical performance compared to bare SnO2. The composite exhibited high reversible capacity, excellent rate capability, and cycling performance, attributed to the designed structure and 3D porous carbon.

IONICS (2021)

Add to Collection

Article Chemistry, Physical

N, O and S co-doped hierarchical porous carbon derived from a series of samara for lithium and sodium storage: Insights into surface capacitance and inner diffusion

Jianghua Zhang et al.

Summary: In this study, carbon materials doped with nitrogen, oxygen, and sulfur were prepared using samara with hollow structures as precursors, exhibiting high reversible specific capacity as anode materials for Li/Na-ion batteries. Comparative studies revealed that sodium ions tend to be stored on the surface of porous carbon, indicating a higher contribution rate of surface-induced capacitance in sodium-ion batteries compared to lithium-ion batteries.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Metal-complexed covalent organic frameworks derived N-doped carbon nanobubble-embedded cobalt nanoparticle as a magnetic and efficient catalyst for oxone activation

Ha Trang Nguyen et al.

Summary: By utilizing COF as a precursor, Co-COF and CoCNB composite materials with strong catalytic activity were synthesized, capable of effectively degrading toxic dye AMD, even in the presence of high concentrations of NaCl and surfactants. The materials also showed reusability over five cycles.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Heterostructured multi-yolk-shell SnO2/Mn2SnO4@C nanoboxes for stable and highly efficient Li/Na storage

Jiao Tian et al.

Summary: A novel multi-yolk-shell nanoboxes composed of SnO2/Mn2SnO4 nanoparticles as yolk and carbon shell were designed for high-performance anode materials in Li and Na ion batteries. The heterostructure of SnO2/Mn2SnO4 effectively enhanced reversibility and reaction kinetics, leading to decent capacity and cycling stability. The hollow structure and carbon shell of the nanoboxes mitigated decomposition and agglomeration of active composites, showcasing promising potential in full cell applications.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Controlled Prelithiation of SnO2/C Nanocomposite Anodes for Building Full Lithium-Ion Batteries

Feifei Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Superior and Reversible Lithium Storage of SnO2/Graphene Composites by Silicon Doping and Carbon Sealing

Liyuan Ao et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

A Three-Dimensional Carbon Framework Constructed by N/S Co-doped Graphene Nanosheets with Expanded Interlayer Spacing Facilitates Potassium Ion Storage

Wenxiu Yang et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Influence of Doping and Controlled Sn Charge State on the Properties and Performance of SnO2 Nanoparticles as Anodes in Li-Ion Batteries

Antonio Vazquez-Lopez et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Add to Collection

Article Energy & Fuels

Pore Characterization of Different Clay Minerals and Its Impact on Methane Adsorption Capacity

Xiaomei Wang et al.

ENERGY & FUELS (2020)

Add to Collection

Article Chemistry, Inorganic & Nuclear

One-dimensional coaxial cable-like MWCNTs/Sn4P3@C as an anode material with long-term durability for lithium ion batteries

Shuting Sun et al.

INORGANIC CHEMISTRY FRONTIERS (2020)

Add to Collection

Article Electrochemistry

Ultrafine TiO2 nanocrystalline anchored on nitrogen-doped amorphous mesoporous hollow carbon nanospheres as advanced anode for lithium ion batteries

Yongfeng Yuan et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

Covalent organic frameworks converted N, B co-doped carbon spheres with excellent lithium ion storage performance at high current density

Bin Ni et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Synthesis of sandwich-like structured Sn/SnOx@MXene composite through in-situ growth for highly reversible lithium storage

Ding-chuan Zuo et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon Derived from Soft Pyrolysis of a Covalent Organic Framework as a Support for Small-Sized RuO2 Showing Exceptionally Low Overpotential for Oxygen Evolution Reaction

Debanjan Chakraborty et al.

ACS OMEGA (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Nano-SnO2/Carbon Nanotube Hairball Composite as a High-Capacity Anode Material for Lithium Ion Batteries

Min Liu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Nanoscience & Nanotechnology

SnO2 Nanosheets for Selective Alkene Gas Sensing

Pil Gyu Choi et al.

ACS APPLIED NANO MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Robust visible/near-infrared light driven hydrogen generation over Z-scheme conjugated polymer/CdS hybrid

Xiaohu Zhang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection

Review Energy & Fuels

Performance and cost of materials for lithium-based rechargeable automotive batteries

Richard Schmuch et al.

NATURE ENERGY (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Surface Gradient Ti-Doped MnO2 Nanowires for High-Rate and Long-Life Lithium Battery

Kangning Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Tin Nanoparticles Encapsulated Carbon Nanoboxes as High-Performance Anode for Lithium-Ion Batteries

Ziming Yang et al.

FRONTIERS IN CHEMISTRY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High Volumetric Capacity of Hollow Structured SnO2@Si Nanospheres for Lithium-Ion Batteries

Tianyi Ma et al.

NANO LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Covalent-organic-frameworks derived N-doped porous carbon materials as anode for superior long-life cycling lithium and sodium ion batteries

Xiaojie Zhang et al.

CARBON (2017)

Add to Collection

Article Chemistry, Multidisciplinary

High-Loading Nano-SnO2 Encapsulated in situ in Three-Dimensional Rigid Porous Carbon for Superior Lithium-Ion Batteries

Hairong Xue et al.

CHEMISTRY-A EUROPEAN JOURNAL (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Stable and Reversible Lithium Storage in SnO2 Nanowires Surface Coated with a Uniform Hollow Shell by Atomic Layer Deposition

Cao Guan et al.

NANO LETTERS (2014)

Add to Collection

Article Multidisciplinary Sciences

High-rate lithiation-induced reactivation of mesoporous hollow spheres for long-lived lithium-ion batteries

Hongtao Sun et al.

NATURE COMMUNICATIONS (2014)

Add to Collection

Article Materials Science, Ceramics

SnO2 nano-spheres/graphene hybrid for high-performance lithium ion battery anodes

Jia Liu et al.

CERAMICS INTERNATIONAL (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.