Related references
Note: Only part of the references are listed.Optimum Water Content Estimation for Wet Granulation of Iron Ore Powders with Quicklime Binder
Shota Yokokawa et al.
ISIJ INTERNATIONAL (2023)
Comparisons of iron ore granulation and sintering performance between horizontal high-shear granulators and drum granulators
Yang You et al.
POWDER TECHNOLOGY (2022)
Challenges and opportunities in modelling wet granulation in pharmaceutical industry-A critical review
Mehakpreet Singh et al.
POWDER TECHNOLOGY (2022)
Effects of process parameters on the growth behavior and granule size distribution of iron ore mixtures in a novel high-shear granulator
Yang You et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)
Determining Optimum Water Content for Iron Ore Granulation using Agitation Torque of Wet Ore Powder
Tomotaka Otsu et al.
ISIJ INTERNATIONAL (2022)
Effect of Granule's Moisture on Granulation Rate of Iron Ore
Kenta Takehara et al.
ISIJ INTERNATIONAL (2022)
Treatment of vanadium-titanium magnetite based on composite agglomeration process (CAP)
Yanan Lu et al.
IRONMAKING & STEELMAKING (2021)
Effect of coating structure of granulated quasi-fuel particles in iron ore sintering
Zhenya Lai et al.
ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING (2021)
Effect of Ti-V Magnetite Concentrate Pellet on the Strength of Green Pellets and the Quality of Sinter by Composite Agglomeration Process (CAP)
Yanan Lu et al.
ISIJ INTERNATIONAL (2021)
Efficient Preparation of Blast Furnace Burdens from Titanomagnetite Concentrate by Composite Agglomeration Process
Tao Jiang et al.
JOM (2021)
Sintering Characteristics of Iron Ore Blends Containing High Proportions of Goethitic Ores
Liming Lu et al.
JOM (2021)
Effect of three different binders and pellet feed on granulation behaviour of sintering mixtures
Fabiano Maia Linhares et al.
IRONMAKING & STEELMAKING (2020)
Effect of granulating characteristics on harmless disposal of waste selective catalytic reduction catalyst in iron ore sintering process
Hao Zhou et al.
ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING (2020)
Advanced converter sludge utilization technologies for the recovery of valuable elements: A review
Yaozu Wang et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Improvement in the permeability of sintering beds by drying treatment after granulating sinter raw materials containing concentrates
Hao Zhou et al.
ADVANCED POWDER TECHNOLOGY (2020)
Resource utilization of municipal solid waste incineration fly ash in iron ore sintering process: A novel thermal treatment
Guojing Wong et al.
JOURNAL OF CLEANER PRODUCTION (2020)
y Life cycle assessment of sintering process for carbon footprint and cost reduction: A comparative study for coke and biomass-derived sintering process
Gaurav Jha et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Importance of intensive mixing on sintering with fine-grained iron ore materials: characterization and function mechanism
Zhiyun Ji et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Comprehensive Technologies for Iron Ore Sintering with a Bed Height of 1 000 mm to Improve Sinter Quality, Enhance Productivity and Reduce Fuel Consumption
Zhengjian Liu et al.
ISIJ INTERNATIONAL (2020)
Effect of characteristics of coarse iron ores on the granulation behaviour of concentrates in the sintering process
Zhigang Que et al.
IRONMAKING & STEELMAKING (2019)
Review on Computational Modeling and Visualization of the Ironmaking Blast Furnace at Purdue University Northwest
Tyamo Okosun et al.
STEEL RESEARCH INTERNATIONAL (2019)
Co-utilization of converter sludge-containing dedust wastewater in iron ore sintering to save fresh water, enhance quality and reduce pollution
Yaozu Wang et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Migration and distributions of zinc, lead and arsenic within sinter bed during updraft pre-reductive sintering of iron-bearing wastes
Deqing Zhu et al.
POWDER TECHNOLOGY (2019)
Recent advances in sintering with high proportions of magnetite concentrates
Hongliang Han et al.
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2018)
Recent advances in sintering with high proportions of magnetite concentrates
Hongliang Han et al.
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2018)
Measurement for Contact Angle of Iron Ore Particles and Water
Kai Tang et al.
ISIJ INTERNATIONAL (2018)
Clean recycle and utilization of hazardous iron-bearing waste in iron ore sintering process
Min Gan et al.
JOURNAL OF HAZARDOUS MATERIALS (2018)
Effects of the addition of municipal solid waste incineration fly ash on the behavior of polychlorinated dibenzo-p-dioxins and furans in the iron ore sintering process
Yi Min et al.
WASTE MANAGEMENT (2018)
Toward New-Generation Intelligent Manufacturing
Zhou Ji et al.
ENGINEERING (2018)
Iron Ore Sintering: Raw Materials and Granulation
D. Fernandez-Gonzalez et al.
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2017)
Iron Ore Sintering: Raw Materials and Granulation
D. Fernandez-Gonzalez et al.
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2017)
Novel utilization of conditioner CaO for gas pollutants control during co-combustion of sludge and coal
Qiang Zhang et al.
FUEL (2017)
Intra-Particle Water Migration Dynamics during Iron Ore Granulation Process
Takahide Higuchi et al.
ISIJ INTERNATIONAL (2017)
Recent Advances and Research Status in Energy Conservation of Iron Ore Sintering in China
Yao-Zu Wang et al.
JOM (2017)
Iron Ore Sintering: Process
D. Fernandez-Gonzalez et al.
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2017)
Effect of Ultrafine Powder of Hematite and Magnetite on Granulation Characteristics of Iron Oxide
Takayuki Maeda et al.
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN (2017)
Iron Ore Sintering: Process
D. Fernandez-Gonzalez et al.
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2017)
Improvement of sintering characteristics by selective granulation of high Al2O3 iron ores and ultrafine iron ores
S. -W. Kim et al.
IRONMAKING & STEELMAKING (2016)
Improving Sintering Performance of Specularite Concentrates by Pre-briquetting Process
Jian Pan et al.
ISIJ INTERNATIONAL (2016)
Intensive powder mixing for dry dispersing of carbon black and its relevance for lithium-ion battery cathodes
Henrike Bockholt et al.
POWDER TECHNOLOGY (2016)
Prediction of the granule size distribution of iron ore sinter feeds that contain concentrate and micropellets
A. M. Nyembwe et al.
POWDER TECHNOLOGY (2016)
Recent advances in iron ore sintering
L. Lu et al.
TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2016)
Granulation behaviour of specularite fines in ferrous sinter mixtures
D. Q. Zhu et al.
TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2016)
Modelling fuel combustion in iron ore sintering
Jia P. Zhao et al.
COMBUSTION AND FLAME (2015)
Botanical origin, colour, granulation, and sensory properties of the Harenna forest honey, Bale, Ethiopia
Abera Belay et al.
FOOD CHEMISTRY (2015)
Preparation of BF Burden from Titanomagnetite Concentrate by Composite Agglomeration Process (CAP)
Tao Jiang et al.
ISIJ INTERNATIONAL (2015)
Effect of H2O(g) Content in Circulating Flue Gas on Iron Ore Sintering with Flue Gas Recirculation
Xu-ling Chen et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2015)
A further study on adsorption interaction of humic acid on natural magnetite, hematite and quartz in iron ore pelletizing process: Effect of the solution pH value
Youlian Zhou et al.
POWDER TECHNOLOGY (2015)
Twin screw granulation - A literature review
Tim Chan Seem et al.
POWDER TECHNOLOGY (2015)
Liquid Absorbability of Iron Ores and Large Limonite Particle Divided Adding Technology in the Sintering Process
Shengli Wu et al.
STEEL RESEARCH INTERNATIONAL (2015)
Optimising method for improving granulation effectiveness of iron ore sintering mixture
M. Gan et al.
IRONMAKING & STEELMAKING (2015)
Effect of distribution of biomass fuel in granules on iron ore sintering and NOx emission
M. Gan et al.
IRONMAKING & STEELMAKING (2014)
The Sinter Mixture Moisture Control System Based on Fuzzy PID Controller
Tinggui Li et al.
FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING II, PTS 1 AND 2 (2014)
Optimization of Dolomite Usage in Iron Ore Sintering Process
Guoliang Zhang et al.
ISIJ INTERNATIONAL (2013)
Improvement of Sinter Productivity by Adding Return Fine on Raw Materials after Granulation Stage
Masaru Matsumura et al.
ISIJ INTERNATIONAL (2013)
Effect of Particle Size of Iron Ore and Coke on Granulation Property of Quasi-Particle
Takayuki Maeda et al.
ISIJ INTERNATIONAL (2013)
Effect of the Separation of Large Limonite Ore Particles in the Granulation Process of Sinter Raw Materials
Juan Zhu et al.
ISIJ INTERNATIONAL (2013)
Utilization of Biomass for Iron Ore Sintering
Takazo Kawaguchi et al.
ISIJ INTERNATIONAL (2013)
Effect of Surface Properties of Iron Ores on their Granulation Behavior
Hongxia Mao et al.
ISIJ INTERNATIONAL (2013)
Combustion Rate of Coke in Quasi-particle at Iron Ore Sintering Process
Ko-ichiro Ohno et al.
ISIJ INTERNATIONAL (2013)
Nanoclay dispersion into a thermosetting binder using sonication and intensive mixing methods
Havva Tutar Kahraman et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
A low-carbon road map for China
Zhu Liu et al.
NATURE (2013)
Emission characterization of unintentionally produced persistent organic pollutants from iron ore sintering process in China
Bo Tian et al.
CHEMOSPHERE (2012)
Ore-blending optimization model for sintering process based on characteristics of iron ores
Sheng-li Wu et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2012)
Relationship between sinter properties and iron ore granulation index
A. Cores et al.
IRONMAKING & STEELMAKING (2012)
Improved distribution of fuel particles in iron ore sintering process
P. Hou et al.
IRONMAKING & STEELMAKING (2011)
New method to determine optimum water content for iron ore granulation
X. W. Lv et al.
IRONMAKING & STEELMAKING (2010)
Composite agglomeration process (CAP) for preparing blast furnace burden
T. Jiang et al.
IRONMAKING & STEELMAKING (2010)
Moisture Capacity: Definition, Measurement, and Application in Determining the Optimal Water Content in Granulating
Xuewei Lv et al.
ISIJ INTERNATIONAL (2010)
Biomass for iron ore sintering
Mohammad Zandi et al.
MINERALS ENGINEERING (2010)
Influence of Coating Granulation Process on Iron Ore Sinter Quality and Productivity
T. Umadevi et al.
STEEL RESEARCH INTERNATIONAL (2010)
Influence of limestone particle size on iron ore sinter properties and productivity
T. Umadevi et al.
STEEL RESEARCH INTERNATIONAL (2010)
Analysis of Raw Material Flow with Axial Direction in Continuous Drum Mixer for Sintering Process
Masaki Hara et al.
ISIJ INTERNATIONAL (2009)
Analysis of Granules Behavior in Continuous Drum Mixer by DEM
Rikio Soda et al.
ISIJ INTERNATIONAL (2009)
Optimization of Coke Breeze Segregation in Sintering Bed under High Pisolite Ore Ratio
Satoshi Machida et al.
ISIJ INTERNATIONAL (2009)
The study of sunflower seed husks as a fuel in the iron ore sintering process
Tze Chean Ooi et al.
MINERALS ENGINEERING (2008)
Effect of ore properties on sinter bed permeability and strength
B. G. Ellis et al.
IRONMAKING & STEELMAKING (2007)
Iron ore sintering with charcoal
R. Lovel et al.
TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2007)
High-shear granulation modeling using a discrete element simulation approach
JA Gantt et al.
POWDER TECHNOLOGY (2005)
Continuous granulation in the pharmaceutical industry
C Vervaet et al.
CHEMICAL ENGINEERING SCIENCE (2005)
The effect of Marra Mamba ore addition on the granulation characteristics of pisolite based and hematite based sinter blends
R Bergstrand et al.
ISIJ INTERNATIONAL (2005)
Twin screw granulation as a simple and efficient tool for continuous wet granulation
EI Keleb et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2004)
Challenges in granulation technology
P Knight
POWDER TECHNOLOGY (2004)
Influence of nature and particle size distribution on granulation of iron ore mixtures used in a sinter strand
A Formoso et al.
IRONMAKING & STEELMAKING (2003)
Balling and granulation kinetics revisited
PC Kapur et al.
INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2003)
Fundamental investigations of differences in bonding mechanisms in iron ore sinter formed from magnetite concentrates and hematite ores
JMF Clout et al.
POWDER TECHNOLOGY (2003)
Modelling of granulation by a two-stage auto-layering mechanism in continuous industrial drums
R Venkataramana et al.
CHEMICAL ENGINEERING SCIENCE (2002)
Powder technology in the pharmaceutical industry: the need to catch up fast
FJ Muzzio et al.
POWDER TECHNOLOGY (2002)
Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review
SM Iveson et al.
POWDER TECHNOLOGY (2001)
Coalescence of deformable granules in wet granulation processes
LX Liu et al.
AICHE JOURNAL (2000)