☆ 4.5 Article

Capacity degradation analysis of the rechargeable iron ion batteries using post-mortem analysis and the impedance spectroscopy

IONICS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Two-Dimensional V2O5 Nanosheets as an Advanced Cathode Material for Realizing Low-Cost Aqueous Aluminum-Ion Batteries

Puja De et al.

Summary: An interconnected sheet-like morphology of low-cost V2O5 is used as a cathode material for aluminum-ion batteries to improve their capacity, rate capability, and cycling stability. The V2O5-based cathode shows excellent performance, with an initial discharge capacity of around 140 mA h g-1 and a capacity retention of 96% after 1000 cycles. The fast intercalation and deintercalation of Al3+ within the stacked layers of V2O5 contribute to these high-performance characteristics, which have been previously ignored in aluminum-ion batteries.

ACS APPLIED ENERGY MATERIALS (2023)

Add to Collection

Article Engineering, Environmental

Flexible, free-standing and dendrite-free iron metal anodes enabled by MXene frameworks for aqueous Fe metal dual-ion batteries

Yuchan Zhang et al.

Summary: In this study, a new MXene/Fe heterostructure is designed as an anode for Fe metal batteries to suppress dendrite growth and improve plating/stripping kinetics of Fe. The Fe growth mechanism on MXene is investigated, and stable cycling life and superior rate capability are achieved when used as anode for Fe metal dual ion batteries. These findings provide an alternative approach for developing high performance Fe-based batteries.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Engineering, Environmental

Regulating the electro-deposition behavior of Fe metal anode and the applications in rechargeable aqueous iron-iodine batteries

Wanlong Wu et al.

Summary: In this study, the deposition behavior of iron metal electrodes was regulated by zinc doping, resulting in the formation of homogeneous small particles and achieving high coulombic efficiency and stability. This research has potential implications for the development of high-performance aqueous iron-metal batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Editorial Material Chemistry, Multidisciplinary

Unlocking the Longevity of the Iron Metal Anode

Sean K. Sandstrom et al.

ACS CENTRAL SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Rechargeable Iron -Ion Battery Using a Pure Ionic Liquid Electrolyte

Yansong Zhao et al.

Summary: A rechargeable iron-ion battery has been developed using a pure ionic liquid electrolyte. The magnetic ionic liquid BmimFeCl(4) shows promising physical and electrochemical properties as an electrolyte for the battery. The iron-containing cathode materials and graphite anode are utilized. The Fe-ion battery with a pure IL electrolyte is not only unique but also safer than those with organic electrolytes, and it holds great potential for various applications.

ACS OMEGA (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Iron metal anode for aqueous rechargeable batteries

Z. He et al.

Summary: Iron metal anode has potential in battery applications, but challenges such as passivation, parasitic hydrogen evolution reaction, and low plating efficiency need to be addressed. Recent progress in developing high-performance iron metal anodes through strategies like electrode additives, electrolyte modification, and nanoarchitecture has been made.

MATERIALS TODAY ADVANCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Fe-Ion Bolted VOPO4•2H2O as an Aqueous Fe-Ion Battery Electrode

Yunkai Xu et al.

Summary: VOPO4 ·2H2O demonstrates a high specific capacity and stable cycling performance for hosting Fe2+ ions, while the capacity for hosting Zn2+ ions diminishes quickly. The unique mechanism of trapping Fe3+ ions in the electrode structure prevents dissolution into the electrolyte during charge and discharge cycles, offering a new strategy to stabilize layered electrode materials using a redox-active ion charge carrier.

ADVANCED MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

MOF-Derived CoS2/N-Doped Carbon Composite to Induce Short-Chain Sulfur Molecule Generation for Enhanced Sodium-Sulfur Battery Performance

Fengping Xiao et al.

Summary: The generation of short-chain sulfur in larger pores and the synergistic catalytic effect of CoS2 can prevent the formation of soluble polysulfides during the sodiation process, leading to superior electrochemical properties of the composite materials in Na-S batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Applied

Enhanced chemical trapping and catalytic conversion of polysulfides by diatomite/MXene hybrid interlayer for stable Li-S batteries

Zehui Fan et al.

Summary: The study presents a diatomite/MXene hybrid material as a bifunctional interlayer for lithium-sulfur batteries, which hinders the shuttling of lithium polysulfides and boosts the adsorption/conversion of LiPSs. The diatomite effectively traps LiPSs and prevents MXene aggregation, leading to improved cycling stability.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Recycling and environmental issues of lithium-ion batteries: Advances, challenges and opportunities

C. M. Costa et al.

Summary: This work provides an overview on the relevance of recycling Lithium-ion batteries (LIBs) and their environmental impact. It analyzes the components and market value of LIBs, addresses different recycling methods for critical metals like cobalt and nickel, and describes the main environmental issues associated with the production, use and end of life of LIBs for electric vehicles.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Proceedings Paper Polymer Science

Study of CNT Intercalated Bi2O3/PVDF Composite for Super Capacitors Applications

Dinesh Kumar Yadav et al.

Summary: Carbon nanotube intercalated-bismuth oxide/polyvinylidenefluoride composites exhibit enhanced capacitance and stability with increasing concentration of Bi2O3 in the PVDF composite. These results demonstrate that CNT-Bi2O3/PVDF composite is a very promising electrode material for high-performance supercapacitors.

MACROMOLECULAR SYMPOSIA (2021)

Add to Collection

Article Chemistry, Physical

Investigation of lithium-ion battery degradation mechanisms by combining differential voltage analysis and alternating current impedance

Jiangong Zhu et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Review Electrochemistry

Modeling and Applications of Electrochemical Impedance Spectroscopy (EIS) for Lithium-ion Batteries

Woosung Choi et al.

JOURNAL OF ELECTROCHEMICAL SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Progress and perspective of aqueous zinc-ion battery

Nengyan Ma et al.

FUNCTIONAL MATERIALS LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Rechargeable Iron-Sulfur Battery without Polysulfide Shuttling

Xianyong Wu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A Rechargeable Battery with an Iron Metal Anode

Xianyong Wu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

A review of rechargeable batteries for portable electronic devices

Yeru Liang et al.

INFOMAT (2019)

Add to Collection

Article Electrochemistry

NASICON-type Na3V2(PO4)(3) as a new positive electrode material for rechargeable aluminium battery

Francisco Nacimiento et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Design criteria of transition metal dopants in TiO2/CdS photoelectrode for enhanced photovoltaic response

Anurag Sahu et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2018)

Add to Collection

Article Energy & Fuels

Nanostructured zinc titanate wide band gap semiconductor as a photoelectrode material for quantum dot sensitized solar cells

Anurag Sahu et al.

SOLAR ENERGY (2018)

Add to Collection

Article Multidisciplinary Sciences

Monovalent manganese based anodes and co-solvent electrolyte for stable low-cost high-rate sodium-ion batteries

Ali Firouzi et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Electrochemistry

Review-Recent Advances and Remaining Challenges for Lithium Ion Battery Cathodes

Florian Schipper et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Physical

Electrochemical behavior of carbonic precursor with Na3V2(PO4)3nanostructured material in hybrid battery system

Prince Babbar et al.

IONICS (2017)

Add to Collection

Article Electrochemistry

Iron Electrodeposition in a Deep Eutectic Solvent for Flow Batteries

Mallory A. Miller et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Solar energy storage in the rechargeable batteries

Qi Li et al.

NANO TODAY (2017)

Add to Collection

Article Energy & Fuels

Analysis of Lithium-Ion Battery Models Based on Electrochemical Impedance Spectroscopy

Uwe Westerhoff et al.

Energy Technology (2016)

Add to Collection

Article Multidisciplinary Sciences

An ultrafast rechargeable aluminium-ion battery

Meng-Chang Lin et al.

NATURE (2015)

Add to Collection

Article Multidisciplinary Sciences

Secondary batteries with multivalent ions for energy storage

Chengjun Xu et al.

SCIENTIFIC REPORTS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

A Review of the Iron-Air Secondary Battery for Energy Storage

R. D. McKerracher et al.

CHEMPLUSCHEM (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Evolution of Strategies for Modern Rechargeable Batteries

John B. Goodenough

ACCOUNTS OF CHEMICAL RESEARCH (2013)

Add to Collection

Article Electrochemistry

Investigations of lithium-sulfur batteries using electrochemical impedance spectroscopy

Natalia A. Canas et al.

ELECTROCHIMICA ACTA (2013)

Add to Collection

Article Electrochemistry

Electrochemical Impedance Spectroscopy Study of a Lithium/Sulfur Battery: Modeling and Analysis of Capacity Fading

Zhaofeng Deng et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Chemistry, Multidisciplinary

3-Dimensional Graphene Carbon Nanotube Carpet-Based Microsupercapacitors with High Electrochemical Performance

Jian Lin et al.

NANO LETTERS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Nanostructured high specific capacity C-LiFePO4 cathode material for lithium-ion batteries

Khadije Bazzi et al.

JOURNAL OF MATERIALS RESEARCH (2012)

Add to Collection

Article Electrochemistry

Rechargeable batteries: challenges old and new

John B. Goodenough

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2012)

Add to Collection

Article Chemistry, Physical

Materials Challenges and Opportunities of Lithium Ion Batteries

Arumugam Manthiram

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2011)

Add to Collection

Article Chemistry, Physical

Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. II: Modelling

D. Andre et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Review Chemistry, Multidisciplinary

Advanced Materials for Energy Storage

Chang Liu et al.

ADVANCED MATERIALS (2010)

Add to Collection

Article Chemistry, Physical

On the Way to Rechargeable Mg Batteries: The Challenge of New Cathode Materials

E. Levi et al.

CHEMISTRY OF MATERIALS (2010)

Add to Collection

Editorial Material Chemistry, Multidisciplinary

Is lithium the new gold?

Jean-Marie Tarascon

NATURE CHEMISTRY (2010)

Add to Collection

Review Materials Science, Multidisciplinary

Progress in electrical energy storage system: A critical review

Haisheng Chen et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.