4.7 Review

Metal-Organic Framework-Based Materials in Aqueous Zinc-Ion Batteries

Related references

Note: Only part of the references are listed.
Article Chemistry, Analytical

Efficient recycling of electrolytic manganese anode mud for the preparation of cathode materials for aqueous zinc ion batteries

Qiuling Zou et al.

Summary: The rapid development of the manganese electrolysis industry has generated a significant amount of electrolytic manganese anode mud (EMAM). Finding ways to reuse this waste is crucial for resource utilization and environmental protection. This study presents a process for preparing aqueous zinc ion battery cathode materials (ZIBs) from EMAM. The process includes manganese leaching, MnO2 synthesis, electrode material preparation, and analysis of electrochemical properties. The results show that the leaching rate of manganese can reach 99.16% in this process, the synthesized MnO2 material has a reticular porous structure, and the prepared MnO2 cathode material exhibits high discharge capacity and cycling stability. This work demonstrates the feasibility of using EMAM waste for cathode material preparation and provides insights for the efficient recovery of EMAM waste and the production of high-performance ZIBs.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2023)

Article Chemistry, Physical

In Situ Grown Hierarchical Electrospun Nanofiber Skeletons with Embedded Vanadium Nitride Nanograins for Ultra-Fast and Super-Long Cycle Life Aqueous Zn-Ion Batteries

Yingmeng Zhang et al.

Summary: In this study, vanadium nitride embedded nitrogen-doped carbon nanofiber (VN/N-CNFs) composites with 3D self-supported skeletons and hierarchical structures were developed to address the issues of inadequate cycle stability and energy density for aqueous zinc-ion batteries (ZIBs). The introduction of vanadium-based metal organic frameworks (V-MOFs) contributed to the in situ hierarchical growth of whisker-like secondary structures and homogeneous distribution of 0D active VN nanograins, providing protection and conductivity to the battery. Additionally, the flexible and free-standing 3D electrospun VN/N-CNFs skeletons exhibited an ultra-long cycle lifespan and a super-high rate capability, showcasing their potential for designing superior ZIBs.

ADVANCED ENERGY MATERIALS (2023)

Article Chemistry, Physical

Metal-organic frameworks with carboxyl functionalized channels as multifunctional ion-conductive interphase for highly reversible Zn anode

WenLi Xin et al.

Summary: A carboxyl functionalized metal-organic framework, UiO-66-(COOH)(2), has been developed as a multifunctional ion-conductive interphase to stabilize the Zn anode in aqueous zinc batteries. The strong interaction between UiO-66-(COOH)(2) and hydrated Zn2+ inhibits side reactions and dendrite growth, leading to a lifespan of over 2800 hours in symmetric cell and a high capacity retention of 91% after 2400 cycles in a full cell. This work provides new insights for the rational design of advanced ion-conductive interphase for metal anodes.

ENERGY STORAGE MATERIALS (2023)

Article Engineering, Environmental

Towards fast-charging high-energy lithium-ion batteries: From nano- to micro-structuring perspectives

Zhengyu Ju et al.

Summary: Electric vehicles are important in reducing greenhouse gas emissions, but current electric vehicles struggle to meet diverse travel needs, particularly in terms of long endurance and fast-charging capacities. The physicochemical limit of lithium-ion batteries, which power the vehicles, is the main issue. Therefore, high-energy and high-power lithium-ion batteries are crucial for the development of electric vehicles.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Engineering, Environmental

Hydroxylation strategy unlocking multi-redox reaction of manganese hexacyanoferrate for aqueous zinc-ion battery

Yicheng Tan et al.

Summary: A hydroxylation strategy is proposed to activate the inactive redox pair of Mn(II)/Mn(III) in manganese hexacyanoferrate (MnHCF), which significantly improves the discharge capacity and energy density of the cathode, offering new opportunities for cathodes with high working voltage and discharge capacity for rechargeable aqueous zinc ion batteries (RAZIBs).

CHEMICAL ENGINEERING JOURNAL (2023)

Review Energy & Fuels

Renewable Energy and Energy Storage Systems

Enas Taha Sayed et al.

Summary: The use of fossil fuels has caused climate change, making renewable and ecologically friendly alternatives necessary. Renewable energy sources, such as solar, wind, and biomass energies, have made significant progress in terms of price and commercial viability. Further work is needed to enhance the capacity of renewable energy sources, particularly in terms of dispatchability and energy storage. Additionally, hybrid renewable energy systems and effective energy management are crucial for balancing production, consumption, and storage. The article also discusses recent advancements in green hydrogen production and fuel cells, offering potential for wider commercial use of renewable energy.

ENERGIES (2023)

Article Chemistry, Multidisciplinary

High-Voltage Aqueous Mg-Ion Batteries Enabled by Solvation Structure Reorganization

Qiang Fu et al.

Summary: This research proposes an eco-friendly and high safety aqueous Mg-ion electrolyte (AME) with a wide electrochemical stability window. The AME is designed by reorganizing the solvation structure of the electrolyte, which significantly improves its physicochemical and electrochemical properties. The testing of V2O5 nanowires in the new AME shows promising results, indicating high initial discharge/charge capacity and capacity retention. Additionally, the study observes a unique phase formed through electrochemical Mg-ion intercalation at room temperature and reveals the cathode electrolyte interphase in aqueous Mg-ion batteries for the first time.

ADVANCED FUNCTIONAL MATERIALS (2022)

Review Chemistry, Inorganic & Nuclear

State of the art developments and prospects of metal-organic frameworks for energy applications

Mohd Zeeshan et al.

Summary: MOFs and their derivatives play a crucial role in energy conversion and storage with various advantageous characteristics. Significant progress has been made in energy applications, particularly excelling in solar energy conversion, supercapacitors, and gas storage.

DALTON TRANSACTIONS (2022)

Article Chemistry, Physical

MOF-based ionic sieve interphase for regulated Zn2+ flux toward dendrite-free aqueous zinc-ion batteries

Yu Wang et al.

Summary: This study proposes a multifunctional protective strategy for zinc-ion batteries, which uses zinc benzene tricarboxylate as a coating material to enable fast Zn2+ transport and stable stripping/plating, while inhibiting side reactions. This strategy achieves ultra-long cycling stability and outstanding capacity retention.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Review Chemistry, Physical

Micro/Nano-Scaled Metal-Organic Frameworks and Their Derivatives for Energy Applications

Yong-Sheng Wei et al.

Summary: Metal-organic frameworks (MOFs) are crystalline porous materials constructed by organic linkers and metal ions/clusters, with high surface area and functional adjustability, leading to versatile applications. This review focuses on the design and synthesis of 1D, 2D, and 3D MOF nanostructures and their derivatives, discussing promising catalytic applications and energy storage, outlining the challenges and future prospects for this emerging field.

ADVANCED ENERGY MATERIALS (2022)

Review Chemistry, Multidisciplinary

Metal-Organic Framework-Based Materials for Aqueous Zinc-Ion Batteries: Energy Storage Mechanism and Function

Xilian Xu et al.

Summary: This review comprehensively presents the current development of MOF-based materials in aqueous rechargeable zinc-ion batteries (ZIBs). The article begins with the zinc storage mechanism of MOFs and introduces various types of MOF-based cathode materials and their regulation approaches for zinc deposition behavior. The key factors and optimization strategies of MOF-based materials that affect ZIBs performance are emphasized and discussed, along with the challenges and further research directions.

CHEMICAL RECORD (2022)

Article Chemistry, Physical

Ammonium escorted chloride chemistry in stabilizing aqueous chloride ion battery

Jianguo Sun et al.

Summary: Researchers propose and demonstrate a strategy for a seawater-based chloride ion battery. By introducing ammonium ions, they improve the reaction kinetics and achieve superior electrochemical performance.

MATERIALS TODAY ENERGY (2022)

Article Nanoscience & Nanotechnology

Metal-Organic Frameworks Functionalized Separators for Robust Aqueous Zinc-Ion Batteries

Yang Song et al.

Summary: In this study, a metal-organic framework modified separator is proposed for robust aqueous zinc-ion batteries. The modified separator enhances the transport ability of charge carriers and corrosion resistance, resulting in dendrite-free zinc deposition. Experimental results show excellent performance in terms of cycle life and capacity retention.

NANO-MICRO LETTERS (2022)

Article Chemistry, Physical

Aqueous sodium ion hybrid batteries with ultra-long cycle life at -50 °C

Kunjie Zhu et al.

Summary: In this study, aqueous electrolytes were modified by introducing a co-solvent formamide (FA), which significantly lowered the freezing point at extremely low temperatures. This modification allowed the aqueous sodium ion hybrid batteries to deliver high capacity and long lifespan, making them suitable for charging smartphones.

ENERGY STORAGE MATERIALS (2022)

Article Multidisciplinary Sciences

Exploration of glassy state in Prussian blue analogues

Nattapol Ma et al.

Summary: This study successfully prepared the glassy state of Prussian blue analogues (PBAs) via a mechanically induced crystal-to-glass transformation, and explored their properties. The results showed that the glassy state PBAs retained short-range metal-ligand-metal connectivity, enabling framework functionality and semiconductivity. The transformation also generated unconventional CN- vacancies and reduced metal sites, resulting in enhanced porosity in recrystallised PBA.

NATURE COMMUNICATIONS (2022)

Article Chemistry, Multidisciplinary

Regulating Exposed Facets of Metal-Organic Frameworks for High-rate Alkaline Aqueous Zinc Batteries

Shuo Yang et al.

Summary: This study proposes a crystal-facet engineering approach to improve the performance of MOF-based electrodes for rechargeable batteries. The authors found that thermally modifying the MOF can regulate the dominant exposed facet, leading to enhanced electrochemical performance. Density functional theory calculations also support the impact of regulated exposed facets on the battery performance.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Chemistry, Multidisciplinary

Formation of CuMn Prussian Blue Analog Double-Shelled Nanoboxes Toward Long-Life Zn-ion Batteries

Yinxiang Zeng et al.

Summary: Cu-substituted Mn-PBA double-shelled nanoboxes (CuMn-PBA DSNBs) with unique hollow structures were prepared and demonstrated efficient Zn ion storage. The CuMn-PBA DSNBs exhibit high reversible capacity, decent rate performance, and superior cycling stability due to the exposed active sites and alleviated volume change during cycling.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Chemistry, Multidisciplinary

In-MOF-Derived Hierarchically Hollow Carbon Nanostraws for Advanced Zinc-Iodine Batteries

Lulu Chai et al.

Summary: In this study, a type of porous hollow carbon nanostraw (HCNS) was synthesized by combining the fusion and removal of indium within the decarboxylation process. The HCNS exhibited more charge active sites and short and quick electron and ion transport pathways, making it an excellent carrier for electrochemically active species. The assembled zinc-iodine batteries (ZIBs) using HCNS as a cathode material showed high capacity and improved rate and cycle performance, making HCNS an ideal material for high-performance batteries.

ADVANCED SCIENCE (2022)

Review Energy & Fuels

Recent advances in cathode materials for aqueous zinc-ion batteries: Mechanisms, materials, challenges, and opportunities

Sanna Gull et al.

Summary: This article provides an overview of the fundamentals, recent developments, and challenges in cathode materials for aqueous Zinc-ion batteries (AZIBs). It emphasizes the importance of studying the intercalation/de-intercalation mechanisms and structural transformations of cathode materials. The article also highlights the potential of AZIBs as alternatives to current Li-ion batteries and discusses the challenges in finding suitable cathode materials with high performance. The authors focus on the study of manganese and vanadium oxide cathodes and discuss the current issues and future perspectives in the AZIB field.

MRS ENERGY & SUSTAINABILITY (2022)

Article Chemistry, Physical

Metal-organic-framework-derived vanadium(iii) phosphate nanoaggregates for zinc-ion battery cathodes with long-term cycle stability

Suk-Ho Hwang et al.

Summary: This study explores the use of VPO4 as a cathode material for aqueous zinc-ion batteries. By using simultaneous carbonization/phosphidation processes, highly crystalline VPO4 nanoparticles are formed in a vanadium-based metal-organic framework. These nanoparticles are interconnected by a conductive thin carbon network. The HVPO cathode exhibits superior rate capability and long cycle life, with pseudocapacitive charge-storage performance.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Review Chemistry, Multidisciplinary

Cathodes for Aqueous Zn-Ion Batteries: Materials, Mechanisms, and Kinetics

Shiyong Zuo et al.

Summary: This review introduces some typical cathode materials in aqueous zinc-ion batteries and summarizes methods for improving the reaction kinetics of zinc ions, as well as discussing challenges and research directions in the field.

CHEMISTRY-A EUROPEAN JOURNAL (2021)

Article Chemistry, Multidisciplinary

Layered V-MOF nanorods for rechargeable aqueous zinc-ion batteries

Yue Ru et al.

Summary: Metal-organic frameworks (MOFs) are drawing attention due to their controllable morphologies, adjustable aperture, and large specific surface areas. A typical V-MOF (MIL-47) product is successfully synthesized via a one-step hydrothermal method, with a one-dimensional layered nanorod-like framework. The V-MOF product, with a rhomboid structure and empty channels, is used as the cathode material for the aqueous MOF-Zn battery, showing high specific capacity, rate capability, and cycling performance.

MATERIALS TODAY CHEMISTRY (2021)

Review Chemistry, Physical

Strategies for the Stabilization of Zn Metal Anodes for Zn-Ion Batteries

Zhehan Yi et al.

Summary: Zinc-ion batteries are considered promising candidates for next-generation energy storage systems due to their high safety, resource availability, and environmental friendliness. However, the instability of the Zn metal anode has hindered their reliable deployment, and efforts have been made to overcome this through electrode structure design, interface modification, and electrolyte/separator optimization. Understanding and categorizing these strategies based on their intrinsic mechanisms are important for the development of novel Zn metal anodes for ZIBs.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Applied

Charge storage mechanism of MOF-derived Mn2O3 as high performance cathode of aqueous zinc-ion batteries

Min Mao et al.

Summary: This study investigates the performance of α-Mn2O3 synthesized via Metal-Organic Framework (MOF)-derived method as cathode of ZIB. It is found that at lower current density, the morphology of discharge products changes significantly, while at higher current density, the dominance of H+ intercalation increases. This has important implications for future design of high-performance Mn-based cathodes for ZIB.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Enabling a Stable Room-Temperature Sodium-Sulfur Battery Cathode by Building Heterostructures in Multichannel Carbon Fibers

Xin Ye et al.

Summary: This study presents a highly stable room-temperature sodium-sulfur battery cathode material constructed with heterostructures in carbon fibers. The cathode exhibits high capacity and high Coulombic efficiency at low rates, and maintains good cyclic stability even at high rates.

ACS NANO (2021)

Article Nanoscience & Nanotechnology

Zinc manganate/manganic oxide bi-component nanorod as excellent cathode for zinc-ion battery

Shi-Chao Ma et al.

Summary: This study presents promising zinc-ion batteries based on metal-organic framework-derived 2-methylimidazole zinc salt/Mn2O3 nanocomposites. Synthesized ZnMn2O4/Mn2O3 bi-component nanorods exhibited superior zinc storage performance with a reversible discharge capacity of 230mAh g(-1) and a high capacity of 80mAh g(-1) at a large current density.

SCRIPTA MATERIALIA (2021)

Review Chemistry, Applied

Recent advances in energy storage mechanism of aqueous zinc-ion batteries

Duo Chen et al.

Summary: Aqueous rechargeable zinc-ion batteries have been receiving increasing research interest due to their safety, cost competitiveness, and capacity advantages compared to lithium ion batteries. However, the disputed energy storage mechanism has been a hindrance to their development. This review provides a detailed summary of the energy storage mechanisms of ZIBs and proposes promising research directions.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Physical

Enhanced intercalation behaviors of edge-rich flakes-stacked graphite for Al-graphite dual-ion battery

Junxiang Wang et al.

Summary: Graphite has been proven to have the highest voltage and cycle stability in Al-graphite dual-ion battery, but its limited energy density hinder its practical application. Edge-rich flakes-stacked graphite prepared by intentionally eroding the outer dense graphitic layer shows improved energy density and rate capability in the battery, achieving higher reversible capacity and areal capacity than untreated graphite paper electrode.

JOURNAL OF POWER SOURCES (2021)

Review Chemistry, Physical

Aqueous rechargeable zinc batteries: Challenges and opportunities

Jianhang Huang et al.

Summary: The development of zinc batteries is booming due to the increasing demand for large-scale energy storage systems to integrate renewable energy into the power grid. However, commercialization of aqueous zinc batteries still faces challenges such as parasitic reactions, zinc dendrite formation, and cathode material dissolution. Understanding the Zn2+ storage mechanism and challenges of electrode materials and aqueous electrolytes, as well as actively discussing solutions for commercialization, are the key points of current research.

CURRENT OPINION IN ELECTROCHEMISTRY (2021)

Article Nanoscience & Nanotechnology

Coordinately Unsaturated Manganese-Based Metal-Organic Frameworks as a High-Performance Cathode for Aqueous Zinc-Ion Batteries

Chengjie Yin et al.

Summary: A new coordinately unsaturated manganese-based metal-organic framework (MOF) is demonstrated as an advanced cathode for aqueous zinc-ion batteries (ZIBs), showing high capacity and long cycling stability by adjusting the coordination degree to improve Zn2+ transport and electron exchange kinetics.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Chemistry, Multidisciplinary

Advances and Perspectives of Cathode Storage Chemistry in Aqueous Zinc-Ion Batteries

Xiao Wang et al.

Summary: This review discusses the key challenges of rechargeable aqueous zinc-ion batteries, analyzing the structural features and electrochemical properties of different cathode materials, and proposing various electrode design strategies to guide future research activities. The focus is mainly on achieving high energy density and durable cathode materials.

ACS NANO (2021)

Review Chemistry, Multidisciplinary

Metal-Organic Framework-Based Hierarchically Porous Materials: Synthesis and Applications

Guorui Cai et al.

Summary: Metal-organic frameworks (MOFs) are fascinating materials with high porosity and tailored structures, but their narrow pores limit applications. The development of hierarchically porous MOFs and derivatives has attracted attention to broaden the scope of traditional MOF-based materials.

CHEMICAL REVIEWS (2021)

Article Chemistry, Multidisciplinary

Host-Guest Molecular Interaction Enabled Separation of Large-Diameter Semiconducting Single-Walled Carbon Nanotubes

Xusheng Yang et al.

Summary: In this study, a host-guest molecular interaction strategy was introduced for selectively extracting semiconducting single-walled carbon nanotubes (s-SWCNTs) of expected diameters by filling polyoxometalate clusters of specific size in the inner cavities of SWCNTs. The sorted s-SWCNTs with diameters concentrated at around 1.3-1.4 nm showed typical semiconductor behavior in field-effect transistors. The sorting mechanism involving size-dependent electron transfer from nanotubes to inner polyoxometalate was revealed through spectroscopic and electron microscopic evidence, as well as theoretical calculations, demonstrating the flexibility in tuning the diameter of sorted s-SWCNTs.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Review Chemistry, Applied

A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards

Yuqing Chen et al.

Summary: Efficient and reliable energy storage systems are essential for modern society, with lithium-ion batteries (LIBs) being widely used but facing safety challenges. This review examines LIB safety issues, strategies for improvement, and current testing standards, providing insights into potential future developments for safer LIBs.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Construction of Co-Mn Prussian Blue Analog Hollow Spheres for Efficient Aqueous Zn-ion Batteries

Yinxiang Zeng et al.

Summary: A template-engaged ion exchange approach was developed for synthesizing Co-substituted Mn-rich PBA hollow spheres, which showed efficient zinc ion storage properties with high capacity, decent rate capability, and prolonged cycle life.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Review Chemistry, Multidisciplinary

Recent progress in metal-organic framework/graphene-derived materials for energy storage and conversion: design, preparation, and application

Kaixi Wang et al.

Summary: Graphene or chemically modified graphene serves as an ideal template for the controllable growth of metal-organic framework particles, effectively improving the stability and conductivity of MOFs and expanding their applications in electrochemistry. Furthermore, the assembled nanocomposite shows unique advantages and significant potential in energy storage and conversion, highlighting the importance of related studies in this field.

CHEMICAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

High-Conductivity-Dispersibility Graphene Made by Catalytic Exfoliation of Graphite for Lithium-Ion Battery

Ran Tao et al.

Summary: Catalytic exfoliation of graphite enables the synthesis of graphene with large lateral size, high conductivity, and excellent water solubility. This high-conductivity-dispersibility graphene can be used broadly for applications such as lithium ion batteries, leading to significantly improved cycling stability and rate performance of electrodes.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Energy & Fuels

A systematic review of the costs and impacts of integrating variable renewables into power grids

Philip J. Heptonstall et al.

Summary: Research has found that the cost of integrating wind and solar power varies significantly, with costs being small or even negative at low penetrations, and increasing as penetration rates rise. However, variable renewable energy sources can still be a key component of the least-cost route to decarbonization.

NATURE ENERGY (2021)

Review Engineering, Environmental

Development and application of carbon fiber in batteries

Shengnan Yang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Multidisciplinary

Intrinsic Facet-Dependent Reactivity of Well-Defined BiOBr Nanosheets on Photocatalytic Water Splitting

Ming Shi et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Multidisciplinary

H+-Insertion Boosted α-MnO2 for an Aqueous Zn-Ion Battery

Xu Gao et al.

SMALL (2020)

Review Chemistry, Physical

Metal-Organic Framework-Based Materials for Energy Conversion and Storage

Tianjie Qiu et al.

ACS ENERGY LETTERS (2020)

Review Multidisciplinary Sciences

Roadmap for advanced aqueous batteries: From design of materials to applications

Dongliang Chao et al.

SCIENCE ADVANCES (2020)

Article Chemistry, Physical

Zn/MnO2 battery chemistry with dissolution-deposition mechanism

Xun Guo et al.

MATERIALS TODAY ENERGY (2020)

Article Chemistry, Multidisciplinary

Electrochemically Induced Metal-Organic-Framework-Derived Amorphous V2O5for Superior Rate Aqueous Zinc-Ion Batteries

Shenzhen Deng et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Nanoscience & Nanotechnology

High-Performance Aqueous Zinc-Ion Batteries Realized by MOF Materials

Xuechao Pu et al.

NANO-MICRO LETTERS (2020)

Review Chemistry, Physical

Recent progress on MOF-derived carbon materials for energy storage

Jincan Ren et al.

CARBON ENERGY (2020)

Review Chemistry, Multidisciplinary

Materials chemistry for rechargeable zinc-ion batteries

Ning Zhang et al.

CHEMICAL SOCIETY REVIEWS (2020)

Review Chemistry, Multidisciplinary

Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries

Feixiang Wu et al.

CHEMICAL SOCIETY REVIEWS (2020)

Review Chemistry, Physical

Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review

Binghe Liu et al.

ENERGY STORAGE MATERIALS (2020)

Review Chemistry, Physical

Metal-Organic Frameworks for Energy

Chun-Chao Hou et al.

ADVANCED ENERGY MATERIALS (2019)

Article Nanoscience & Nanotechnology

Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions

Chaojiang Niu et al.

NATURE NANOTECHNOLOGY (2019)

Article Energy & Fuels

Building aqueous K-ion batteries for energy storage

Liwei Jiang et al.

NATURE ENERGY (2019)

Article Nanoscience & Nanotechnology

Artificial Solid-Electrolyte Interface Facilitating Dendrite-Free Zinc Metal Anodes via Nanowetting Effect

Mingqiang Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Review Multidisciplinary Sciences

Recycling lithium-ion batteries from electric vehicles

Gavin Harper et al.

NATURE (2019)

Article Multidisciplinary Sciences

Conductive 2D metal-organic framework for high-performance cathodes in aqueous rechargeable zinc batteries

Kwan Woo Nam et al.

NATURE COMMUNICATIONS (2019)

Review Materials Science, Multidisciplinary

Metal-organic frameworks: Structures and functional applications

Long Jiao et al.

MATERIALS TODAY (2019)

Review Chemistry, Multidisciplinary

Issues and opportunities facing aqueous zinc-ion batteries

Boya Tang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Review Chemistry, Multidisciplinary

Two-dimensional metal-organic framework nanosheets: synthesis and applications

Meiting Zhao et al.

CHEMICAL SOCIETY REVIEWS (2018)

Review Chemistry, Physical

Metal-Organic Framework-Derived Carbons for Battery Applications

Xiaxia Li et al.

ADVANCED ENERGY MATERIALS (2018)

Review Chemistry, Physical

Present and Future Perspective on Electrode Materials for Rechargeable Zinc-Ion Batteries

Aishuak Konarov et al.

ACS ENERGY LETTERS (2018)

Article Chemistry, Physical

Metal-Organic Frameworks for Batteries

Ruo Zhao et al.

JOULE (2018)

Article Chemistry, Multidisciplinary

Zn/MnO2 Battery Chemistry With H+ and Zn2+ Coinsertion

Wei Sun et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Review Chemistry, Multidisciplinary

Metal-Organic Frameworks for Energy Applications

Hailong Wang et al.

Article Chemistry, Physical

Towards High-Voltage Aqueous Metal-Ion Batteries Beyond 1.5 V: The Zinc/Zinc Hexacyanoferrate System

Leyuan Zhang et al.

ADVANCED ENERGY MATERIALS (2015)

Article Multidisciplinary Sciences

Tunable Electrical Conductivity in Metal-Organic Framework Thin-Film Devices

A. Alec Talin et al.

SCIENCE (2014)