4.7 Article

Polymeric Interlayer in CdS-Free Electron-Selective Contact for Sb2Se3 Thin-Film Solar Cells

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Interfacial Dipole Layer Enables High-Performance Heterojunctions for Photoelectrochemical Water Splitting

Juwon Yun et al.

Summary: A dipole reorientation strategy is proposed to enhance the photovoltaic effect between TiO2 and p-type absorbers by inserting a PEIE layer. It is demonstrated that the orientation of PEIE dipole can be rearranged by increasing the layer thickness, resulting in an upward shift of the TiO2 band edge. By using this approach, the onset potential of TiO2-protected heterojunction photocathodes is significantly improved.

ACS ENERGY LETTERS (2022)

Article Energy & Fuels

High-Resistance Metal Oxide Window Layers for Optimal Front Contact Interfaces in Sb2Se3 Solar Cells

Joao O. Mendes et al.

Summary: This study investigated the effect of high resistance metal oxide (HRMO) layers on the quality of the front contact in solar cells. The results showed that using ZnO or TiO2 HRMO layers between FTO substrates and CdS improves the overall device performance and stability.

SOLAR RRL (2022)

Article Chemistry, Multidisciplinary

Sb2Se3 Thin-Film Solar Cells Exceeding 10% Power Conversion Efficiency Enabled by Injection Vapor Deposition Technology

Zhaoteng Duan et al.

Summary: This study reports the fabrication of compact Sb2Se3 films using injection vapor deposition, resulting in high crystallinity and minimal defects, which leads to improved energy conversion efficiency in solar cells.

ADVANCED MATERIALS (2022)

Article Chemistry, Physical

Expanding the Perspective of Polymeric Selective Contacts in Photovoltaic Devices Using Branched Polyethylenimine

Eloi Ros et al.

Summary: This work investigates the use of polyethylenimine (PEI) as an interface modification for electron-selective contacts. The study demonstrates that PEI modification can greatly improve electrical transport, reduce contact resistance, and achieve effective surface passivation. PEI modification eliminates Fermi-level pinning at metal/semiconductor junctions and induces charge transport, leading to the formation of an electron accumulation region and significantly improved electron-selective contacts.

ACS APPLIED ENERGY MATERIALS (2022)

Review Materials Science, Multidisciplinary

Absolute work function measurement by using photoelectron spectroscopy

Jeong Won Kim et al.

Summary: The importance of the work function of materials and ways to measure it are discussed in this article. The focus is on potential errors in WF measurement and providing guidance for reliable measurements. Future directions for absolute WF measurement are proposed along with limitations of current technology.

CURRENT APPLIED PHYSICS (2021)

Article Energy & Fuels

Application Properties of ZnO and AZO Thin Films Obtained by the ALD Method

Barbara Swatowska et al.

Summary: The study explored the deposition of ZnO and AZO films on silicon and glass substrates using the ALD method, with a focus on their applications in photovoltaics. Structural, optical, and electrical investigations were conducted to understand the properties of the films, and the relationships between samples doped with different Al fractions were discussed.

ENERGIES (2021)

Article Chemistry, Multidisciplinary

Light-Promoted Electrostatic Adsorption of High-Density Lewis Base Monolayers as Passivating Electron-Selective Contacts

Xi Yang et al.

Summary: Efficient passivating carrier-selective contacts (PCSCs) have been achieved using a light-promoted adsorption method, establishing high-density PEI monolayers for n-type silicon solar cells. This approach not only improves device efficiency, but also provides a convenient coating deposition strategy for various applications.

ADVANCED SCIENCE (2021)

Article Chemistry, Physical

Single-Layer MoS2-MoO3-x Heterojunction Nanosheets with Simultaneous Photoluminescence and Co-Photocatalytic Features

Maryam Saadati et al.

Summary: Single-layer MoS2-MoO3-x heterojunction nanosheets with visible-light-sensitive band gap energy were successfully synthesized by a two-step combined exfoliation method. These nanosheets, characterized by their morphological features, crystalline structure, and optical properties, showed potential applications as plasmonic materials for enhancing photocatalytic activity while exhibiting excitation-dependent luminescence emissions.

CATALYSTS (2021)

Article Chemistry, Physical

Surface restoration of polycrystalline Sb2Se3 thin films by conjugated molecules enabling high-performance photocathodes for photoelectrochemical water splitting

Jeiwan Tan et al.

Summary: By modifying the interface of polycrystalline Sb2Se3 photocathodes with para-aminobenzoic acid (PABA), both onset potential and photocurrent were enhanced, improving the performance of the photoelectrochemical (PEC) water splitting.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Review Chemistry, Multidisciplinary

Lessons learned from spiro-OMeTAD and PTAA in perovskite solar cells

Florine M. Rombach et al.

Summary: Organic semiconductors are crucial in thin-film electronic devices, especially as hole transport layers (HTLs) in perovskite solar cells (PSCs). Spiro-OMeTAD and PTAA have been the leading materials for high efficiency HTLs, with research on their properties contributing to a better understanding of their success mechanisms. This review provides key insights into the electronic and morphological properties, doping strategies, and degradation pathways of spiro-OMeTAD and PTAA, guiding the development of future HTL materials with improved stability and efficiency for PSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Energy & Fuels

Towards high efficiency Cd-Free Sb2Se3 solar cells by the band alignment optimization

Iman Gharibshahian et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Review Chemistry, Multidisciplinary

Interfacial Dipole in Organic and Perovskite Solar Cells

Qi Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Chemistry, Physical

Efficient defect passivation of Sb2Se3 film by tellurium doping for high performance solar cells

Yuyuan Ma et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Nanoscience & Nanotechnology

Improvement in Sb2Se3 Solar Cell Efficiency through Band Alignment Engineering at the Buffer/Absorber Interface

Gang Li et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Multidisciplinary Sciences

9.2%-efficient core-shell structured antimony selenide nanorod array solar cells

Zhiqiang Li et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

Analysis of Sb2Se3/CdS based photovoltaic cell: A numerical simulation approach

Ling-yan Lin et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2018)

Review Chemistry, Applied

Development of antimony sulfide-selenide Sb2(S, Se)3-based solar cells

Xiaomin Wang et al.

JOURNAL OF ENERGY CHEMISTRY (2018)

Article Energy & Fuels

6.6% efficient antimony selenide solar cells using grain structure control and an organic contact layer

Oliver S. Hutter et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Article Economics

Evaluating the causes of cost reduction in photovoltaic modules

Goksin Kavlak et al.

ENERGY POLICY (2018)

Review Chemistry, Physical

Sb2S3 Solar Cells

Rokas Kondrotas et al.

JOULE (2018)

Article Energy & Fuels

Calcium contacts to n-type crystalline silicon solar cells

Thomas G. Allen et al.

PROGRESS IN PHOTOVOLTAICS (2017)

Article Energy & Fuels

Magnetron sputtered ZnO buffer layer for Sb2Se3 thin film solar cells

Xixing Wen et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

Article Energy & Fuels

Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer

Liang Wang et al.

NATURE ENERGY (2017)

Proceedings Paper Energy & Fuels

Demonstrating the high Voc potential of PEDOT:PSS/c-Si heterojunctions on solar cells

Ralf Gogolin et al.

7TH INTERNATIONAL CONFERENCE ON SILICON PHOTOVOLTAICS, SILICONPV 2017 (2017)

Review Chemistry, Multidisciplinary

Brief review of emerging photovoltaic absorbers

Andriy Zakutayev

CURRENT OPINION IN GREEN AND SUSTAINABLE CHEMISTRY (2017)

Article Engineering, Electrical & Electronic

Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics

Chao Chen et al.

FRONTIERS OF OPTOELECTRONICS (2017)

Article Physics, Applied

A magnesium/amorphous silicon passivating contact for n-type crystalline silicon solar cells

Yimao Wan et al.

APPLIED PHYSICS LETTERS (2016)

Review Engineering, Electrical & Electronic

Antimony selenide thin-film solar cells

Kai Zeng et al.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2016)

Article Environmental Studies

The Paris Agreement on Climate Change: Behind Closed Doors

Radoslav S. Dimitrov

GLOBAL ENVIRONMENTAL POLITICS (2016)

Article Nanoscience & Nanotechnology

Thermal Evaporation and Characterization of Sb2Se3 Thin Film for Substrate Sb2Se3/CdS Solar Cells

Xinsheng Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Chemistry, Multidisciplinary

Facile dissolution of selenium and tellurium in a thiol-amine solvent mixture under ambient conditions

David H. Webber et al.

CHEMICAL SCIENCE (2014)

Article Chemistry, Physical

Solution-Processed Antimony Selenide Heterojunction Solar Cells

Ying Zhou et al.

ADVANCED ENERGY MATERIALS (2014)