☆ 4.4 Article

Microstructure evolution and mechanical properties of aluminium matrix composites reinforced with CoMoMnNiV high-entropy alloy

INTERNATIONAL JOURNAL OF METALCASTING (2023)

Related references

Note: Only part of the references are listed.

Article Metallurgy & Metallurgical Engineering

Microstructural, mechanical and corrosion behaviour of B4C/BN-reinforced Al7075 matrix hybrid composites

N. Ramadoss et al.

Summary: This study focuses on improving the mechanical and corrosion properties of aluminium hybrid metal matrix composites (AHMMCs) by using boron carbide (B4C) and boron nitride (BN) as reinforcement particles. The AHMMCs with different weight percentages of B4C and fixed weight percentage of BN were synthesized using the stirring-squeeze cast method. The results show that the microstructure and chemical composition changes significantly improve the performance of the composites, making them potentially useful in automotive and marine applications.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

Add to Collection

Article Metallurgy & Metallurgical Engineering

RECYCLING OF ALUMINIUM MATRIX COMPOSITES (AMCS): A REVIEW AND THE WAY FORWARD

R. P. Barot et al.

Summary: This review paper focuses on the modifications in the characteristics of Aluminium Matrix Composites (AMCs) after recycling. The recycling is mainly done through the removal or retention of particles and base alloy. The challenges include reduced metal yield, wastage of particles, and the generation of detrimental intermetallics.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Investigation of Microstructure and Mechanical Properties of Cast Al-10Zn-3.5Mg-2.5Cu Nanocomposite Reinforced with Graphene Nano Sheets Produced by Ultrasonic Assisted Stir Casting

Mohammad Alipour et al.

Summary: The microstructure and mechanical properties of aluminum alloy Al-10Zn-3.5Mg-2.5Cu/graphene nanoplates composites produced by ball milling and stir casting were investigated. The addition of dispersed graphene nanoplates with high specific surface area significantly increased the strength of the composites. Tensile tests showed that the addition of graphene nanoplates increased the ultimate tensile strength. Heat treatment at T6 condition further improved the strength of the samples.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Investigation of Mechanical Characterization, Thermal Behavior and Dielectric Properties on Al7075-TiB2 MMC Fabricated Using Stir Casting Route

M. Thirumal Azhagan et al.

Summary: This study investigates the mechanical, thermal, and dielectric properties of Al7075-based metal matrix composites reinforced with varying weight percentages of titanium diboride (TiB2). The results show that composites with 8% weight fraction of TiB2 exhibit higher strength and microhardness, but lower impact strength. The grain size decreases with increasing reinforcement content, resulting in improved uniformity in the composites.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Investigations on Mechanical Properties of Micro- and Nano-Particulates (Al2 O3/B4C) Reinforced in Al 7075 Matrix Composite

G. Kumaresan et al.

Summary: This study aimed to investigate the enhancement of mechanical properties in composites by adding micro- and nanoparticles to the aluminium matrix. The research found that the reinforcement of nanoparticles significantly improved the mechanical properties compared to micro-particles, due to their high surface energy.

INTERNATIONAL JOURNAL OF METALCASTING (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of TiB2 Particles on the Morphological, Mechanical and Corrosion Behaviour of Al7075 Metal Matrix Composite Produced Using Stir Casting Process

M. Manoj et al.

Summary: This study focused on investigating the morphological, mechanical, and corrosion behavior of Al7075-TiB2 metal matrix composites. The addition of TiB2 particles through stir casting process improved the tensile strength and micro hardness of the composites, while reducing the wear rate. Electrochemical potentiodynamic polarization and salt spray tests confirmed the enhanced corrosion resistance of the Al-TiB2 composites.

INTERNATIONAL JOURNAL OF METALCASTING (2022)

Add to Collection

Article Engineering, Manufacturing

Effect of high entropy particle on aerospace-grade aluminium composite developed through combined mechanical supersonic vibration and squeeze infiltration technique

Vasanthakumar Pandian et al.

Summary: The study successfully synthesized HEA particles for reinforcing aluminum metal matrix, with confirmed mechanical properties such as hardness, impact strength, wear resistance, and corrosion resistance. The presence of different phases and precipitates in the composite materials was confirmed through XRD analysis, and the composite specimens showed improved mechanical performance compared to the base cast specimen.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

The Influence of Multi-Phase Intermetallic Compounds on the Microstructure and Tribological Behaviors of 6061 Al Alloy by Adding AlCoCrFeNi High-Entropy Alloy

Qinglin Li et al.

Summary: Introducing AlCoCrFeNi high-entropy alloy (HEA) into 6061 Al alloy to prepare aluminum matrix composites (AMCs) significantly improved the hardness and friction properties of the AMCs. The addition of HEA led to the precipitation of intermetallic compounds and nano-scale AlCoFeNi phases, resulting in enhanced mechanical and tribological characteristics compared to the 6061 Al alloy.

INTERNATIONAL JOURNAL OF METALCASTING (2022)

Add to Collection

Review Materials Science, Multidisciplinary

A critical review on mechanically alloyed high entropy alloys: processing challenges and properties

Akshay Kumar et al.

Summary: High entropy alloys are innovative materials with excellent mechanical properties, wear resistance, and corrosion resistance, making them suitable for a wide range of industrial applications. Researchers have focused on non-equimolar alloys and mechanical alloying methods in their extensive studies.

MATERIALS RESEARCH EXPRESS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanically alloyed high entropy alloys: existing challenges and opportunities

Akshay Kumar et al.

Summary: High entropy alloys (HEAs) were first reported in 2004, but significant progress in this field has been made since 2010 due to their unique properties and the ability to form various compositions. Researchers initially focused on equiatomic HEAs and later shifted to non-equiatomic alloys. Mechanical alloying and sintering were identified as effective methods for processing HEAs. This review discusses the properties, functional properties, and applications of mechanically alloyed HEAs, as well as the existing challenges and opportunities.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis and characterization of a novel CoCrFeMnNi high-entropy alloy-reinforced AA6082 composite

Akshay Kumar et al.

Summary: By using mechanical alloying and stir-squeeze casting, CoCrFeMnNi high-entropy alloy and Al-6082 composite were successfully developed, showing that a consistent distribution of HEA particles can significantly enhance the mechanical properties of the composite under as-cast condition.

JOURNAL OF MATERIALS RESEARCH (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Processing and preparation of aerospace-grade aluminium hybrid metal matrix composite in a modified stir casting furnace integrated with mechanical supersonic vibration squeeze infiltration method

Vasanthakumar Pandian et al.

Summary: Composite materials are versatile, economical, and lightweight, making them ideal alternatives for aerospace applications. A modified casting furnace integrated with mechanical supersonic vibration was used to develop an aluminum alloy base cast and hybrid composite. Various reinforcements were tested for their effects on the matrix through material characterization and mechanical testing.

MATERIALS TODAY COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Ultra-fine grain TixVNbMoTa refractory high-entropy alloys with superior mechanical properties fabricated by powder metallurgy

Qing Liu et al.

Summary: TixVNbMoTa refractory high-entropy alloys were prepared through MA and SPS, and the effect of Ti content on their microstructures and mechanical properties was investigated. Increasing Ti content resulted in larger grain sizes and volume fractions of the matrix and precipitation phases, while also decreasing the density of the alloys.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Nuclear Science & Technology

Microstructure formation mechanism and corrosion behavior of FeCrCuTiV two-phase high entropy alloy prepared by different processes

Shaoqiu Xia et al.

Summary: The microstructure and corrosion resistance of FeCrCuTiV high entropy alloy were studied, with results showing that the laser melting deposition process reduces grain size and volume fraction of Cu-rich phase. The higher cooling rate of laser melting deposition contributes to limited grain growth and decreased Cu-rich phase volume fraction. FeCrCuTiV high entropy alloy prepared by laser melting deposition exhibits better corrosion resistance in salt solution electrochemical corrosion test due to reduced Cu-rich phase.

FUSION ENGINEERING AND DESIGN (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Achieving high strength and high ductility in a high-entropy alloy by a combination of a heterogeneous grain structure and oxide-dispersion strengthening

Zhuo Cheng et al.

Summary: The study achieved an excellent combination of high strength and high ductility in the Ni2C-oCrFeTi(0.2) HEA by designing a heterogeneous grain structure and dispersing oxide nanoparticles. The dominant strengthening mechanisms included grain-boundary strengthening, oxide-dispersion strengthening, and back stress strengthening, while good ductility was mainly attributed to back stress hardening and dislocation hardening. This work provides deep insight for designing high-performance HEAs.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Microscopy

Effect of Co on the microstructure and oxidation behavior of CoxCrCuFeMnNi high entropy alloy powders

Jianjian Zhang et al.

Summary: The microstructure, phase, alloying behavior, and oxidation behavior of CoxCrCuFeMnNi high entropy alloy powders with different Co content were studied. The results showed that the alloying began after 5 hours of ball milling and the oxidation resistance decreased with the increase of Co content.

MICRON (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

50 Years of Foundry-Produced Metal Matrix Composites and Future Opportunities

Ajay P. Kumar et al.

INTERNATIONAL JOURNAL OF METALCASTING (2020)

Add to Collection

Article Chemistry, Physical

Influence of aging treatment on the microstructure and mechanical properties of CNTs/7075 Al composites

H. B. Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Physical

Effect of heat treatment on the interface of high-entropy alloy particles reinforced aluminum matrix composites

Zhanwei Yuan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Physical

Microstructures and mechanical properties of oxide dispersion strengthened CoCrFeNi high-entropy alloy produced by mechanical alloying and spark plasma sintering

Mingyang Li et al.

INTERMETALLICS (2020)

Add to Collection

Article Automation & Control Systems

Producing of FeCoNiCrAl high-entropy alloy reinforced Al composites via friction stir processing technology

Jicheng Gao et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Friction stir processing of high-entropy alloy reinforced aluminum matrix composites for mechanical properties enhancement

Junchen Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Engineering, Manufacturing

Synthesis and machining characteristics of novel TiC ceramic and MoS2 soft particulate reinforced aluminium alloy 7075 matrix composites

Anvesh Dhulipalla et al.

MANUFACTURING LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Microstructure and mechanical properties of fine-grained aluminum matrix composite reinforced with nitinol shape memory alloy particulates produced by underwater friction stir processing

G. Q. Huang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Characterization of Al-7075 metal matrix composites: a review

Mohammed Imran et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of FeCoCrNiMnTi0.1C0.1 high-entropy alloy produced by mechanical alloying and vacuum hot pressing sintering

Xiaoqiang Liu et al.

VACUUM (2019)

Add to Collection

Article Multidisciplinary Sciences

Microstructure Control and Performance Evolution of Aluminum Alloy 7075 by Nano-Treating

Min Zuo et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Chemistry, Physical

Processing and mechanical properties of fine grained Al matrix composites reinforced with a uniform dispersion of nanocrystalline high-entropy alloy particles

Tiwen Lu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of ball milling on microstructure and mechanical properties of 6061Al matrix composites reinforced with high-entropy alloy particles

Weiping Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Deformation-driven metallurgy of graphene nanoplatelets reinforced aluminum composite for the balance between strength and ductility

Yuming Xie et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Microstructure and properties of high-entropy alloy reinforced aluminum matrix composites by spark plasma sintering

Zhanwei Yuan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Study on phase formation in magnetic FeCoNiMnV high entropy alloy produced by mechanical alloying

F. Alijani et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Strengthening mechanisms in ultrasonically processed aluminium matrix composite with in-situ Al3Ti by salt addition

Rahul Gupta et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Chemistry, Physical

Effects of N addition on microstructure and mechanical properties of CoCrFeNiMn high entropy alloy produced by mechanical alloying and vacuum hot pressing sintering

Yanchong Xie et al.

INTERMETALLICS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

The effects of Cr particles addition on the aging behavior and mechanical properties of SiCp/7075Al composites

Tiwen Lu et al.

MATERIALS CHARACTERIZATION (2018)

Add to Collection

Article Nanoscience & Nanotechnology

The influence of nanocrystalline CoNiFeAl0.4Ti0.6Cr0.5 high-entropy alloy particles addition on microstructure and mechanical properties of SiCp/7075Al composites

Tiwen Lu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

High entropy multicomponent WMoNbZrV alloy processed by mechanical alloying

Dariusz Oleszak et al.

MATERIALS LETTERS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

A novel high-strength Al-based nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgye

W. W. Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of Nb25Mo25Ta25W25 and Ti8Nb23Mo23Ta23W23 high entropy alloys prepared by mechanical alloying and spark plasma sintering

Jiayi Pan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Multidisciplinary Sciences

Database on the mechanical properties of high entropy alloys and complex concentrated alloys

S. Gorsse et al.

DATA IN BRIEF (2018)

Add to Collection

Article Chemistry, Physical

Micro structural characteristics and mechanical behaviour of aluminium matrix composites reinforced with titanium carbide

K. Ravi Kumar et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure, mechanical analysis and optimal selection of 7075 aluminum alloy based composite reinforced with alumina nanoparticles

H. R. Ezatpour et al.

MATERIALS CHEMISTRY AND PHYSICS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Al-Ti Particulate Composite: Processing and Studies on Particle Twinning, Microstructure, and Thermal Stability

Devinder Yadav et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)

Add to Collection

Article Materials Science, Multidisciplinary

The design of a novel neutron shielding B4C/Al composite containing Gd

Z. G. Xu et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

B. Schuh et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Chemistry, Physical

Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

Wei Ji et al.

INTERMETALLICS (2015)

Add to Collection

Article Chemistry, Physical

Fabrication and characterization of 2024 aluminium - High entropy alloy composites

K. Praveen Kumar et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Tensile and fracture behavior of nano/micro TiB2 particle reinforced casting A356 aluminum alloy composites

M. Karbalaei Akbari et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Multi Response Optimization for Processing Al-SiCp Composites: An Approach Towards Enhancement of Mechanical Properties

H. Goyal et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2015)

Add to Collection

Article Chemistry, Physical

Precipitation strengthening of Al-B4C metal matrix composites alloyed with Sc and Zr

J. Lai et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

Add to Collection

Article Electrochemistry

Thermal Stability and Performance of NbSiTaTiZr High-Entropy Alloy Barrier for Copper Metallization

Ming-Hung Tsai et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles

Zhihui Zhang et al.

SCRIPTA MATERIALIA (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy

S. Scudino et al.

ACTA MATERIALIA (2009)

Add to Collection

Article Chemistry, Physical

Microstructure and mechanical properties of aluminum alloy matrix composite reinforced with nano-particle MgO

A. Ansary Yar et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites

S. Scudino et al.

JOURNAL OF MATERIALS SCIENCE (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanical properties of SiC/Gr/Al composites fabricated by squeeze casting technology

Jinfeng Leng et al.

SCRIPTA MATERIALIA (2008)

Add to Collection

Article Materials Science, Composites

Effect of Mg and Si in the aluminum on the thermo-mechanical properties of pressureless infiltrated SiCp/Al composites

Shubin Ren et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Properties of P/M processed particle reinforced metal matrix composites specified by reinforcement concentration and matrix-to-reinforcement particle size ratio

A Slipenyuk et al.

ACTA MATERIALIA (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Degassing of molten aluminum A356 alloy using ultrasonic vibration

HB Xu et al.

MATERIALS LETTERS (2004)

Add to Collection

Article Nanoscience & Nanotechnology

Fabrication of Ni-Nb-Ta metallic glass reinforced Al-based alloy matrix composites by infiltration casting process

MH Lee et al.

SCRIPTA MATERIALIA (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.