☆ 4.7 Article

Genetic optimized Al-Mg alloy constitutive modeling and activation energy analysis

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Optimization of Forming Parameters in Incremental Sheet Forming of AA3003-H18 Sheets Using Taguchi Method

Mohanraj Murugesan et al.

Summary: This research aimed to determine the optimal forming parameters using the Taguchi method in order to produce high-quality formed products. The results showed that the vertical step size had the most significant influence on surface roughness, followed by the feed rate and the forming tool radius. The optimal settings were found to be forming tool radius at level 3, spindle speed at level 1, vertical step size at level 1, and feed rate at level 4. Additionally, the response surface methodology was effectively used to predict surface roughness.

MATERIALS (2022)

Add to Collection

Article Crystallography

Investigation of the Flow Behavior of Air-Cooling Ti-6Al-4V Alloy after Superplastic Forming

Xiaoning Han et al.

Summary: The flow behavior of Ti-6Al-4V alloy during the air-cooling process after superplastic forming is discussed. The optimized deformation temperatures and strain rates are identified, and the effects of activation energy, deformation strain, and dislocation density on flow behavior are explored. In addition, unstable flow is mainly caused by dynamic recrystallization, and the material gradually experiences damage during the air-cooling process.

CRYSTALS (2022)

Add to Collection

Article Energy & Fuels

MICS-ANN model: An artificial neural network model for fast computation of G-function in moving infinite cylindrical source model

Yutaka Shoji et al.

Summary: This paper presents a method to quickly and accurately calculate the temperature response function of the moving infinite cylindrical source model using an artificial neural network. The fast and accurate calculation of this model is expected to contribute to the optimal design of shallow geothermal systems.

GEOTHERMICS (2022)

Add to Collection

Article Chemistry, Physical

Hot deformation characteristics of NiTiV shape memory alloy and modeling using constitutive equations and artificial neural networks

S. Santosh et al.

Summary: This study investigates the hot deformation behavior and mechanisms of Ni50Ti48V2 alloy through hot deformation tests and dynamic materials modeling. By comparing the prediction performance of two models, the use of the artificial neural network model for predicting the stresses during hot deformation process is determined. Furthermore, the flow stress required for dynamic recrystallization and its correlation with power dissipation efficiency are analyzed.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Review Chemistry, Physical

A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys

Zeinab Savaedi et al.

Summary: This review article provides an overview of the hot deformation behavior and constitutive description of flow stress in high entropy alloys (HEAs). The potential of hot working for grain refinement, reduction of casting defects, and enhancement of mechanical properties of HEAs is explained. The effects of processing parameters, alloying elements, dynamic precipitation, and the presence of phases on the hot deformation behavior and restoration processes are discussed. The application of processing maps for characterizing flow instability, cracking, flow softening, and dynamic recrystallization during hot forming of HEAs is presented. Various constitutive models and methods for flow stress modeling and flow curve prediction are assessed. Suggestions for future research works are proposed.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Engineering, Mechanical

Establishing flow stress behaviour of Ti-6Al-4V alloy and development of constitutive models using Johnson-Cook method and Artificial Neural Network for quasi-static and dynamic loading

S. Deb et al.

Summary: Ti-6Al-4V alloy is a widely used material with high strength-to-weight ratio, low density and excellent high-temperature properties. This study investigates the mechanical behavior of the alloy under different deformation conditions, and develops constitutive models. Additionally, an artificial neural network framework is developed for predicting flow stress, which proves to be more efficient than the traditional Johnson-Cook model.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

Add to Collection

Article Chemistry, Physical

Flow Behavior of AA5005 Alloy at High Temperature and Low Strain Rate Based on Arrhenius-Type Equation and Back Propagation Artificial Neural Network (BP-ANN) Model

Sijia Li et al.

Summary: Conducting research on the flow behavior of lightweight materials under specified work conditions is crucial for achieving energy-saving goals. In this study, hot isothermal tensile tests and machine learning methods were used to analyze the flow behavior of aluminum alloy AA5005. The results showed that machine learning methods have better performance in regressing and predicting flow stress.

MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Hot Deformation and Constitutive Modeling of TC21 Titanium Alloy

Sheng-Xian Yi et al.

Summary: This study investigated the deformation behavior of TC21 titanium alloy using high-temperature tensile tests. It was found that the flow stress of the material gradually decreases with an increased strain rate and increases rapidly with an increase in strain during deformation. The established Arrhenius and Radial Basis Function models accurately describe the high-temperature deformation behavior of the material.

MATERIALS (2022)

Add to Collection

Article Mathematics

A Comparative Study of Strain Rate Constitutive and Machine Learning Models for Flow Behavior of AZ31-0.5 Ca Mg Alloy during Hot Deformation

Umer Masood Chaudry et al.

Summary: In this study, isothermal compression tests were conducted on highly ductile AZ31-0.5Ca Mg alloys at different conditions, and a strain-dependent constitutive model was constructed based on the Arrhenius equation and machine learning. The results demonstrated that the machine learning model outperformed the traditional model.

MATHEMATICS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A modified Arrhenius constitutive model of 2219-O aluminum alloy based on hot compression with simulation verification

Hao Wang et al.

Summary: In this study, the flow stress data of 2219-O aluminum alloy were obtained through hot compression tests, and four different constitutive models were established and evaluated for their prediction accuracy. A newly modified constitutive model was proposed, which had a simpler structure and accurately predicted the evolution behavior of flow stress.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A comparative study on modified and optimized Zerilli-Armstrong and arrhenius-type constitutive models to predict the hot deformation behavior in 30Si2MnCrMoVE steel

Fan Li et al.

Summary: The elevated temperature flow behaviors of 30Si2MnCrMoVE low-alloy ultra-high strength steel were studied through hot compressive deformation tests and the establishment of constitutive equations. It was found that the modified ZA model was not accurate in describing the flow behavior, while the Arrhenius type model had the highest prediction accuracy.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Heterogeneities in the microstructure and mechanical properties of high-Cr martensitic stainless steel produced by repetitive hot roll bonding

Min-Seong Kim et al.

Summary: A multi-layered plate composed of high-Cr martensitic stainless steel with robust interfacial strength was produced through repetitive hot roll bonding at elevated temperature. The carbon content fluctuated along the thickness direction, and the multi-layered composite structure exhibited an effective combination of strength and ductility. Strong bonding at each interface was confirmed through tensile testing with in-situ observation during deformation.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

High-temperature tensile characteristics and constitutive models of ultrahigh strength steel

DongXu Wen et al.

Summary: The study reveals that the high-temperature tensile behavior of the steel shows typical work hardening and dynamic recovery characteristics. The necking capability increases with decreasing strain rate and increasing tensile temperature. However, the presence of large deep dimples significantly reduces the loading capability and leads to poor elongation to fracture at low strain rates. The Arrhenius-type phenomenological (AP) model developed by the Nelder-Mead (NM) simplex method shows high accuracy and narrow error bands compared to other models.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

The Flow Stress Behavior and Constitutive Model of Cr8Mo2SiV Tool Steel during Hot Deformation

Chang-Sheng Li et al.

Summary: The study found that the flow stress of Cr8Mo2SiV tool steel strongly depends on deformation temperature and strain rate, and proposed models for estimating flow stress. The validity of the established constitutive models was verified by standard statistical parameters, and the analysis of hot deformed microstructure was conducted using the powerful predictive ability of the constitutive model.

STEEL RESEARCH INTERNATIONAL (2021)

Add to Collection

Article Engineering, Mechanical

Flow characterization of magnesium alloy ZK61 during hot deformation with improved constitutive equations and using activation energy maps

Jinchuan Long et al.

Summary: This study characterized the flow characteristics and workability of as-extruded magnesium alloy ZK61 through isothermal compression tests. Flow stress curves were analyzed, and both conventional and improved Arrhenius constitutive equations were developed to predict flow characteristics. Activation energy maps identified dominant deformation mechanisms and optimal processing conditions for the alloy.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Engineering, Industrial

Temper rolling to control texture and earing in aluminium alloy AA 5050A

Olaf Engler et al.

Summary: This paper analyzes the formation of texture and earing properties in sheets of the Al-Mg alloy AA 5050A, as well as measures to improve earing properties by adapting the ratio of relevant texture components.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

New constitutive equation utilizing grain size for modeling of hot deformation behavior of AA1070 aluminum

H. R. Rezaei Ashtiani et al.

Summary: A new constitutive model was proposed to accurately describe the hot flow behavior of AA1070 aluminum under different conditions, considering various influencing factors and validated through experiments.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and constitutive model for flow behavior of AlSi10Mg by Selective Laser Melting

Shi Dai et al.

Summary: The study investigates the flow behavior and microstructure evolution of AlSi10Mg through hot deformation during additive manufacturing. It is found that at different temperatures, the microstructure changes significantly, with cellular structure and melt pool boundary disappearing as temperature increases. Additionally, at 400℃, a homogenization process leads to precipitation forming a dispersed phase, resulting in weak hardening of the material. The constitutive model shows good agreement with experimental results at high temperature.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Comparative Study of Accurate Descriptions of Hot Flow Behaviors of BT22 Alloy by Intelligence Algorithm and Physical Modeling

Shaoling Ding et al.

Summary: The nonlinear flow behaviors of BT22 alloy were investigated through thermal simulation experiments, and models like GA-SVR, BPANN, SVR, and physical model were established to describe these behaviors. The GA-SVR model showed the highest accuracy and generalization ability among all models.

MATHEMATICAL PROBLEMS IN ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

High-Temperature Deformation of Naturally Aged 7010 Aluminum Alloy

Abdulhakim A. Almajid

Summary: This study explores the deformation mechanism and behavior of naturally aged 7010 aluminum alloy at elevated temperatures, highlighting the presence of threshold stress and the corresponding true activation energy values. The Zener-Hollomon parameter for the alloy was developed to show the impact of effective stress, with data in each region coalescing in a segment line.

METALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Modeling and simulation of dynamic recrystallization in super austenitic stainless steel employing combined cellular automaton, artificial neural network and finite element method

K. Arun Babu et al.

Summary: A cellular automaton (CA) model has been established for predicting flow stress, DRX grain size, and DRX fraction of super austenitic stainless steel under different strain rates and temperatures, which has been further optimized and used for establishing ANN-based constitutive models. A modified cellular automata (CAM) model has been developed to numerically consider the solute drag effect, showing improved accuracy in predicting microstructure evolution and flow behavior of the alloy under non-isothermal deformation conditions.

COMPUTATIONAL MATERIALS SCIENCE (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Comparison of flow behaviors of near beta Ti-55511 alloy during hot compression based on SCA and BPANN models

Shuang-xi Shi et al.

Summary: The flow behavior of Ti-55511 alloy was studied by hot compression tests, indicating that the flow stress is sensitive to deformation temperature and strain rate, increasing with increasing strain rate and decreasing temperature. Both the SCA model and BPANN model can describe the flow behaviors, but BPANN shows higher fitting accuracy.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hot tensile behavior of a low-alloyed ultrahigh strength steel: fracture mechanism and physically-based constitutive model

DongXu Wen et al.

Summary: The hot tensile behavior of a low-alloyed ultra-high strength (LUHS) steel was studied, and the effects of tensile processing parameters on the hot tensile behaviors and fracture characteristics were comprehensively discussed. A dislocation density based constitutive model was constructed and improved by considering plastic damage, showing high stress under low tensile temperatures or high strain rates. Ductile fracture with dimples was the dominant fracture type, and the model was found to be preferred for reconstructing the hot tensile behaviors of the studied steel.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Assessment of AA5005 aluminum alloy corrosion resistance by Direct Blue 15 inhibitor in sodium chloride medium

Asmaa EL Mazyani et al.

Summary: The study investigated the corrosion inhibition of aluminum in 3% NaCl solution by Direct Blue 15 dye, showing that it acts as an inhibitor by adsorbing on the metal surface and improving inhibition efficiencies with concentration. Both gravimetric and electrochemical methods supported the findings.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Flow stress prediction using hyperbolic-sine Arrhenius constants optimised by simple generalised reduced gradient refinement

Michael Oluwatosin Bodunrin

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Multidisciplinary Sciences

Microstructure Evaluation and Constitutive Modeling of AISI-1045 Steel for Flow Stress Prediction under Hot Working Conditions

Mohanraj Murugesan et al.

SYMMETRY-BASEL (2020)

Add to Collection

Article Chemistry, Physical

Johnson Cook Material and Failure Model Parameters Estimation of AISI-1045 Medium Carbon Steel for Metal Forming Applications

Mohanraj Murugesan et al.

MATERIALS (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Modification of constitutive model and evolution of activation energy on 2219 aluminum alloy during warm deformation process

Lei Liu et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

Add to Collection

Article Chemistry, Physical

Evaluation of hot deformation characteristics in modified AA5052 using processing map and activation energy map under deformation heating

Kwang-Tae Son et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Energy & Fuels

Application of Artificial Intelligence Techniques to Estimate the Static Poisson's Ratio Based on Wireline Log Data

Salaheldin Elkatatny

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Multidisciplinary Sciences

Designing a magnesium alloy with high strength and high formability

T. T. T. Trang et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Modeling the Hot Tensile Flow Behaviors at Ultra-High-Strength Steel and Construction of Three-Dimensional Continuous Interaction Space for Forming Parameters

Guo-zheng Quan et al.

HIGH TEMPERATURE MATERIALS AND PROCESSES (2017)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Flow behavior of Al-6.2Zn-0.70Mg-0.30Mn-0.17Zr alloy during hot compressive deformation based on Arrhenius and ANN models

Jie Yan et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)

Add to Collection

Article Materials Science, Multidisciplinary

The improvement on constitutive modeling of Nb-Ti micro alloyed steel by using intelligent algorithms

Si-Wei Wu et al.

MATERIALS & DESIGN (2017)

Add to Collection

Article Construction & Building Technology

True stress-strain curves for ASTM A992 steel for fracture simulation at elevated temperatures

Wenyu Cai et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Constitutive Equations and Flow Behavior of an As-Extruded AZ31 Magnesium Alloy Under Large Strain Condition

Yuanyuan Dong et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)

Add to Collection

Article Materials Science, Multidisciplinary

The Use of genetic algorithm and neural network to predict rate-dependent tensile flow behaviour of AA5182-O sheets

Arash Jenab et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Engineering, Industrial

Characterization of hot workability in AA 7050 aluminum alloy using activation energy and 3-D processing map

S. Wang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

Add to Collection

Article Engineering, Biomedical

Unrealistic statistics: How average constitutive coefficients can produce non-physical results

Daniel Robertson et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Texture and anisotropy in the Al-Mg alloy AA 5005-Part II: Correlation of texture and anisotropic properties

Olaf Engler et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Add to Collection

Article Materials Science, Multidisciplinary

A comparative study on the capability of Johnson-Cook and Arrhenius-type constitutive equations to describe the flow behavior of Mg-6A1-1Zn alloy

A. Abbasi-Bani et al.

MECHANICS OF MATERIALS (2014)

Add to Collection

Article Engineering, Multidisciplinary

Neural network modeling to evaluate the dynamic flow stress of high strength armor steels under high strain rate compression

Ravindranadh Bobbili et al.

DEFENCE TECHNOLOGY (2014)

Add to Collection

Article Multidisciplinary Sciences

Analysis and Nanomold Design for Aluminum Nanoimprinting

Te-Hua Fang et al.

SMART SCIENCE (2014)

Add to Collection

Article Materials Science, Multidisciplinary

A comparative study on constitutive relationship of as-cast 904L austenitic stainless steel during hot deformation based on Arrhenius-type and artificial neural network models

Ying Han et al.

COMPUTATIONAL MATERIALS SCIENCE (2013)

Add to Collection

Review Engineering, Multidisciplinary

Review on Methods to Fix Number of Hidden Neurons in Neural Networks

K. Gnana Sheela et al.

MATHEMATICAL PROBLEMS IN ENGINEERING (2013)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Constitutive relationship model of TC21 alloy based on artificial neural network

La-feng Guo et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Hot deformation behavior of Ti-15-3 titanium alloy: a study using processing maps, activation energy map, and Zener-Hollomon parameter map

Jingqi Zhang et al.

JOURNAL OF MATERIALS SCIENCE (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Characterization of hot deformation behavior of a P/M nickel-base superalloy using processing map and activation energy

Zhang Mingjie et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Constitutive modeling for elevated temperature flow behavior of 42CrMo steel

Y. C. Lin et al.

COMPUTATIONAL MATERIALS SCIENCE (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Plastic instabilities and dislocation densities during plastic deformation in Al-Mg alloys

Gyozo Horvath et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Add to Collection

Review Materials Science, Multidisciplinary

Micromechanics of room and high temperature fracture in 6xxx Al alloys

D. Lassance et al.

PROGRESS IN MATERIALS SCIENCE (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Development of dynamic recrystallization theory

HJ McQueen

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.