Related references
Note: Only part of the references are listed.
Article
Physics, Multidisciplinary
Indah Raya et al.
Summary: This work investigated the role of microalloying process on the properties of Fe-P-C-based amorphous system. The simultaneous microalloying of Ni and Co was found to enhance the glass forming ability, while FeCoNiCuPC amorphous alloy exhibited the best anelastic/viscoplastic behavior. However, the addition of Cu to improve plasticity led to decreased magnetic properties.
Article
Chemistry, Multidisciplinary
Kadda Hachem et al.
Summary: In this study, a new magnetic chitosan-salicylaldehyde Schiff base adsorbent was successfully prepared and used for efficient removal of Pb(II) and Cd(II) ions from aqueous solution. The adsorption process was thoroughly examined and optimized, and the adsorbent reusability and adsorption mechanism were studied. The results showed high adsorption capacity and efficiency for Pb(II) and Cd(II) ions. Furthermore, the adsorbent exhibited strong antibacterial activity against various bacterial strains.
JOURNAL OF THE CHINESE CHEMICAL SOCIETY
(2022)
Article
Chemistry, Physical
Dmitry Olegovich Bokov et al.
Summary: In this study, we investigated the effect of Ir decoration on the sensing performance of GaNNT in detecting MA using density functional theory. The results showed that Ir decoration significantly enhanced the adsorption capacity of GaNNT for MA and greatly improved the sensing response, while also having a short recovery time. The presence of water solvent reduced the adsorption energy of MA.
MOLECULAR SIMULATION
(2022)
Article
Physics, Multidisciplinary
Chao Liu et al.
Summary: Two novel non-isoelectronic with diamond (non-IED) B-C-O phases, tI16-B8C6O2 and mP16-B8C5O3, have been discovered. The study on their phonon scattering spectra and independent elastic constants confirms their stability under ambient pressure and high pressure. The research on formation enthalpies and their relationship with pressure suggests the importance of high pressure technology in the synthesis of these compounds. These phases exhibit different electrical conductivity and bandgap characteristics, and their mechanical properties are significantly affected by pressure. These findings are of great significance for the study of non-IED B-C-O compounds.
Article
Materials Science, Textiles
Ming-Chao Han et al.
Summary: The current pandemic caused by COVID-19 has driven the development of high-performance air filters. This study developed an electret PP meltblown nonwoven with antibacterial activity, which significantly improved filtration efficiency and antibacterial properties.
FIBERS AND POLYMERS
(2022)
Article
Chemistry, Physical
Raed Obaid Saleh et al.
Summary: Through density functional theory (DFT), the strong interaction between 5-aminosalicylic acid (5-ASA) and aluminum nitride nano-tubes (AlNNTs) was investigated. The adsorption of AlNNTs with the carbonyl group of 5-ASA was found to have a higher adsorption energy, while the interaction with the -OH and -CO2H groups was weak. The adsorption process was spontaneous, and there was a high energy charge transfer between 5-ASA and AlNNTs, leading to a change in energy levels and enhanced electrical conductivity. These results suggest that AlNNTs can be considered as suitable materials for delivering 5-ASA in biological systems.
JOURNAL OF MOLECULAR LIQUIDS
(2022)
Article
Engineering, Chemical
Xuefang Hu et al.
Summary: This study utilizes molecular dynamics simulation to analyze the behavior of water/Fe3O4 nanofluid in Cu and Pt wall type microchannels. The results indicate that the atomic stability of the system increases by changing the MC type.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS
(2022)
Article
Chemistry, Multidisciplinary
Masoome Sadeghi et al.
Summary: Density functional theory calculations were used to investigate the effect of doping aluminum, gallium and zinc atoms on the sensing performance of a C-60 fullerene in detecting dichlorosilane gas. The results showed that zinc doping significantly enhanced the sensitivity of the fullerene.
MONATSHEFTE FUR CHEMIE
(2022)
Review
Materials Science, Multidisciplinary
Long-Qing Chen et al.
Summary: The article focuses on the phase-field method as a density-based computational method for modeling and predicting temporal microstructure and property evolution during materials processes. It discusses the connections between phase-field equations and classical thermodynamics, as well as the relationships of continuum phase-field equations at different levels. Additionally, it examines the contributions of long-range interactions to domain structure evolution during phase transformations.
PROGRESS IN MATERIALS SCIENCE
(2022)
Article
Chemistry, Applied
Zhejun Wang et al.
Summary: In order to comprehensively understand the fracture properties of solid propellants, tensile fracture toughness tests were conducted on hydroxyl-terminated polybutadiene (HTPB) propellant. The test results showed that the shape of the stress-strain curves was not significantly affected by temperature, loading rate, and initial crack size. However, a higher loading rate and lower temperature could improve the tensile fracture toughness of HTPB propellant. The variation of the initial crack size also caused obvious changes in fracture toughness.
PROPELLANTS EXPLOSIVES PYROTECHNICS
(2022)
Article
Optics
XiaoLin Liu et al.
Summary: This study optimized a surface plasmon resonance (SPR) sensor based on SiO2-Ag periodic grating using a graphene and MoS2 hybrid structure to enhance its sensitivity. The experimental results showed that the sensor achieved significantly improved sensitivity and quality factor with a good linear relationship.
Article
Chemistry, Analytical
R. Sivaraman et al.
Summary: The electrochemical characteristics and magnesium storage of a graphyne-like boron nitride monolayer as an electrode material for Mg-ion batteries were investigated using density functional theory computations. The results show that the adsorption energy decreases and magnesium mobility increases with higher concentration of Mg atoms, with a maximum theoretical capacity of roughly 939.16 mA h.g-1 in the 2-D nano-sheet.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
(2022)
Article
Chemistry, Multidisciplinary
Mustafa M. Kadhim et al.
Summary: This study investigates the influence of metal decoration on the sensing performance of boron phosphide nanotubes and finds that indium decoration enhances the sensitivity towards 2-chloroethanol.
MONATSHEFTE FUR CHEMIE
(2022)
Article
Chemistry, Multidisciplinary
Saade Abdalkareem Jasim et al.
Summary: In this study, biocompatible and biodegradable Ta-metal organic framework (MOF)/polyether block amide (PEBA) fibrous polymeric nanostructures were synthesized for the first time using ultrasonic and electrospinning routes. The adsorption behavior of the nanostructures showed mesoporous behavior and the CH4 adsorption rate was investigated. The results demonstrated that ultrasonic and electrospinning routes as well as immobilization of Ta-MOF in the PEBA fibrous network influenced the performance of the final products for CH4 gas adsorption.
FRONTIERS IN CHEMISTRY
(2022)
Article
Materials Science, Multidisciplinary
Tongzheng Xin et al.
Summary: The phase transformation sequence, precipitation evolution, and optimized microstructure of Mg-Li-Al alloys were investigated. The main reason for alloy softening was analyzed, and the core-shell model of the phase transformation was observed and verified.
Review
Chemistry, Physical
Saade Abdalkareem Jasim et al.
Summary: This review article provides an overview of the recent progress and applications of MXene, a new family of 2D materials, including its fabrication methods, compositional properties with polymers and metals. It focuses on its electrochemical applications, medical uses, flame retardance effects, and electromagnetic shielding properties. The article also briefly discusses the current limitations and future research needs of MXene.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Chemistry, Physical
Bo Liu et al.
Summary: This study investigates the thermal and atomic behavior of ammonia/copper nanofluid in aluminum nanochannels with different surface coatings. The results show that hydrophilic surfaces improve the thermal behavior and reduce the phase change time of the nanofluid.
JOURNAL OF MOLECULAR LIQUIDS
(2022)
Article
Chemistry, Applied
Ning Wang et al.
Summary: The effects of calcium to silicon (C/S) ratio and SO42- concentration on chloride ion adsorption in calcium silicate hydrate (C-S-H) gels were systematically studied. Higher C/S ratio induces more chloride ion adsorption, while the presence of SO42- reduces the adsorption. Insights into ion adsorption behavior provide useful information for prolonging the durability of marine concrete by designing appropriate compositions.
MICROPOROUS AND MESOPOROUS MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Gang Zhao et al.
Summary: In this manuscript, the effects of agglomeration on the vibration of fiber metal laminated (FML) cylindrical shell in the micro phase using developed couple stress theory (MCST) were investigated. The non-classical equations of motion were derived based on Love's first approximation theory. The study analyzed the frequency response of a micro agglomerated CNTFPML cylindrical shell under various input parameters. The results showed that the frequencies were directly dependent on the increase of material length scale parameter and the agglomeration parameters.
ARABIAN JOURNAL OF CHEMISTRY
(2022)
Article
Engineering, Geological
Jun Peng et al.
Summary: This study investigates the influence of brittleness on the microcracking behavior of crystalline rock using numerical simulations. The results show that as the brittleness decreases, the failure mode of the rock changes from tension to shear, and the ratio of grain boundary cracks to shear cracks increases. The transition from tensile crack to shear crack is observed under both uniaxial compression and direct tension.
INTERNATIONAL JOURNAL OF GEOMECHANICS
(2022)
Review
Food Science & Technology
Rabeya Anzum et al.
Summary: Cloud point extraction is an environmentally friendly and cost-effective method for extracting functional thermally sensitive bioactive components from food, and it is widely used in the food industry. This article summarizes the theoretical results and applications of cloud point extraction in the food industry.
FOOD SCIENCE AND TECHNOLOGY
(2022)
Article
Chemistry, Multidisciplinary
Gang Zhao et al.
Summary: This study investigates the effects of agglomeration on the vibration of fiber metal laminated cylindrical shells using couple stress theory, showing that the increase in frequency is directly related to the increase in material length scale parameter.
ARABIAN JOURNAL OF CHEMISTRY
(2022)
Article
Metallurgy & Metallurgical Engineering
Bin-Jiang Lv et al.
Summary: A new wrought magnesium alloy based on Mg-6.0Zn-0.5Mn has been developed, exhibiting a superior combination of high tensile yield strength and good ductility. Addition of minor neodymium and erbium accelerates twinning, dynamic recrystallization, and dynamic precipitation processes, leading to improved mechanical properties. The alloy demonstrates enhanced yield strength, tensile strength, and elongation due to fine complete DRX grains, second phase particles, and a high density of precipitates resulting from the micro-alloying.
JOURNAL OF MAGNESIUM AND ALLOYS
(2021)
Article
Electrochemistry
Wenqian Hao et al.
Summary: A chemo-mechanical coupled theoretical model of a bilayer electrode system was established to alleviate diffusion-induced stress, and the effects of pre-strain on stress distribution and ion diffusion behavior in lithium-ion batteries were discussed. The results provide valuable insights for reducing stress and improving performance in LIBs.
JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE
(2021)
Article
Nanoscience & Nanotechnology
Supat Chupradit et al.
Summary: The study evaluated the heat transfer efficiency in a shell tube heat exchanger with different variables using nanofluids. The Nusselt number significantly increased with higher Reynolds numbers for higher diameter ratios and organic fluids, showing improved heat transfer in turbulators. Moreover, at higher torsion pitch ratios, the Nusselt number also showed a significant increase with higher Reynolds numbers, especially at higher velocities and pipe turbulence torsions.
JOURNAL OF NANOMATERIALS
(2021)
Review
Materials Science, Multidisciplinary
Dmitry Bokov et al.
Summary: The sol-gel process is a chemical method for synthesizing nanostructures, particularly metal oxide nanoparticles. It involves converting molecular precursors into a gel through hydrolysis/alcoholysis, followed by drying, powdering, and calcination. The method is cost-effective, allows control over chemical composition, and finds various applications in industries such as optics, electronics, energy, and biosensors.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING
(2021)
Article
Materials Science, Multidisciplinary
Zhiqiang Zhang et al.
Summary: The addition of CeO2 can effectively inhibit the formation of cracks and pores, and significantly influence the content and distribution of dendritic TiCx. The phase composition of the coatings is not affected by CeO2, but Ce and O atoms from CeO2 decomposition are recrystallized and distributed within the coatings. Al, V, and Cr elements are uniformly distributed, while Ni and Cr elements are segregated.
MATERIALS CHARACTERIZATION
(2021)
Article
Engineering, Electrical & Electronic
Xiaorui Zhang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
(2020)
Article
Engineering, Biomedical
Ahmed Ibrahim et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS
(2020)
Article
Materials Science, Multidisciplinary
Xiaofei Fan et al.
Article
Engineering, Industrial
Qimeng Zhu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
(2017)
Review
Materials Science, Ceramics
Kati Raju et al.
CERAMICS INTERNATIONAL
(2016)
Article
Physics, Multidisciplinary
M. D. Unlu et al.
ACTA PHYSICA POLONICA A
(2014)
Article
Materials Science, Coatings & Films
A. Hojjati Najafabadi et al.
SURFACE ENGINEERING
(2013)
Review
Materials Science, Ceramics
Zuhair A. Munir et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
(2011)
Article
Materials Science, Ceramics
Hidehiro Yoshida et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
(2008)
Article
Materials Science, Ceramics
A. Maitre et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
(2008)
Article
Nanoscience & Nanotechnology
U Anselmi-Tamburini et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
(2005)