☆ 4.7 Article

Numerical-experimental investigation of using rubber blank holder on wrinkling of metallic bipolar plates formed by stamping process

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Investigation of deformation mechanics and forming limit of thin-walled metallic bipolar plates

Hossein Talebi-Ghadikolaee et al.

Summary: The study investigates the formation of metallic bipolar plates using 316 stainless steel sheet with a parallel serpentine flow field. The plastic deformation of microchannels, forming limit criteria, and deformation mechanics during the process are explored to establish a reliable fracture initiation model. Experimental stamping tests and finite element simulations are conducted, showing good agreement with thickness distribution and force-displacement curves. A fracture model based on thinning percentage and equivalent strain is developed to predict the instability of metallic bipolar plates.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Influence of process parameters and defect analysis in hot deep drawing process of aluminum alloy AA6082

Ma Wen-yu et al.

Summary: A novel punch toolset was developed to investigate the hot stamping of AA6082-T4 sheet. The effects of process parameters on formability were quantified using Taguchi design, ANOVA, and mathematical statistics. The finite element model in Pamstamp software was utilized to simulate and analyze the effects on the minimum thickness and thickness variation of the hot-stamped component. The major factors influencing the minimum thickness were found to be blank holder force and friction coefficient, while punch velocity and blank holder force significantly affected the thickness deviation. Various types, phenomena, and mechanisms of defects occurring during hot stamping process were discussed.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2022)

Add to Collection

Article Chemistry, Physical

Formability improvement in multi-stage stamping of ultra-thin metallic bipolar plate for proton exchange membrane fuel cell

Minh Tien Tran et al.

Summary: In this study, a novel die design is proposed for the fabrication of ultra-thin metallic bipolar plates (BPP) for proton exchange membrane (PEM) fuel cells. Finite element simulations demonstrate that the multi-stage forming with the proposed die approach significantly improves the formability of ultra-thin BPP. The results indicate a more uniform thickness distribution and reduced springback, leading to the fabrication of high-quality metallic BPP and a relatively high fuel consumption efficiency.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Fracture prediction in the stamping of titanium bipolar plate for PEM fuel cells

Vahid Modanloo et al.

Summary: This study employed the stamping process to fabricate metallic bipolar plates and investigated the fracture issues during plastic deformation of commercially pure titanium. Several fracture criteria were studied for fracture prediction, with the damage-based criteria proving to be more reliable for accurate fracture prediction during stamping.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Integration of design of experiment and finite element method for the study of geometrical parameters in metallic bipolar plates for PEMFCs

F. Ahmadi Khatir et al.

Summary: Bipolar plates play a crucial role in fuel cells, and this study mainly focuses on the manufacturing process of metallic bipolar plates and the influence of geometric parameters on the plate formation. Experimental results indicate that channel depth, draft angle, and corner radius have the most significant effect on plate thinning, while corner radius and draft angle have the greatest impact on maximum channel depth.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Variable Punch Speed and Blank Holder Force in Warm Superplastic Deep Drawing Process

Ken-ichi Manabe et al.

Summary: By conducting a cylindrical deep drawing test, the flange wrinkle behavior and wall thickness distribution in warm deep drawing were studied using a superplastic material. The experiment with variable BHF showed a significant impact on wall thickness distribution uniformity, while variable SPD was found to reduce processing time effectively for superplastic materials. The authors also demonstrated the effectiveness of the variable BHF/SPD deep drawing method.

METALS (2021)

Add to Collection

Article Chemistry, Physical

Investigation of formability of metallic bipolar plates via stamping for light-weight PEM fuel cells

Kivanc Karacan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Engineering, Civil

Investigation of failure during rubber pad forming of metallic bipolar plates

Hossein Talebi-Ghadikolaee et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Multidisciplinary Sciences

Optimal Design of Stamping Process for Fabrication of Titanium Bipolar Plates Using the Integration of Finite Element and Response Surface Methods

Vahid Modanloo et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Multidisciplinary Sciences

Manufacturing of Titanium Bipolar Plates Using Warm Stamping Process

Vahid Modanloo et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Engineering, Manufacturing

Manufacturing methods for metallic bipolar plates for polymer electrolyte membrane fuel cell

Oluwaseun Ayotunde Alo et al.

MATERIALS AND MANUFACTURING PROCESSES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical Study on the Formability of Metallic Bipolar Plates for Proton Exchange Membrane (PEM) Fuel Cells

Diogo M. Neto et al.

METALS (2019)

Add to Collection

Article Chemistry, Physical

Study of thickness distribution and dimensional accuracy of stamped metallic bipolar plates

Mohammad M. Barzegari et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Stamping Process Parameter Optimization with Multiple Regression Analysis Approach

Tushar Y. Badgujar et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Add to Collection

Article Automation & Control Systems

Manufacturing metallic bipolar plate fuel cells through rubber pad forming process

Majid Elyasi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Automation & Control Systems

Fabrication of metallic bipolar plates in PEM fuel cell using semi-stamp rubber forming process

Majid Elyasi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

Integration of finite element analysis and design of experiment for the investigation of critical factors in rubber pad forming of metallic bipolar plates for PEM fuel cells

Roza Kolandooz et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Chemistry, Physical

Two-stage forming approach for manufacturing ferritic stainless steel bipolar plates in PEM fuel cell: Experiments and, numerical simulations

Hyuk Jong Bong et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Engineering, Mechanical

WRINKLING PREDICTION IN DEEP DRAWING BY USING RESPONSE SURFACE METHODOLOGY AND ARTIFICIAL NEURAL NETWORK

Hossein Rafizadeh et al.

TRANSACTIONS OF FAMENA (2017)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Experimental investigation of Fracture in rubber pad forming of bipolar plate's micro channels

Hossein Talebi Ghadikolaee et al.

INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017 (2017)

Add to Collection

Article Automation & Control Systems

Improving channel depth of stainless steel bipolar plate in fuel cell using process parameters of stamping

Won Tae Park et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

Add to Collection

Article Engineering, Manufacturing

A Comparative Study on the Formability of Aluminum Bipolar Plate with Channels using Indirect Squeeze Casting and Stamping

Chul-Kyu Jin et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)

Add to Collection

Article Automation & Control Systems

Comparison of formabilities of stainless steel 316L bipolar plates using static and dynamic load stamping

Min-June Kim et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)

Add to Collection

Article Chemistry, Physical

Investigation of stamping process of metallic bipolar plates in PEM fuel cell-Numerical simulation and experiments

Qinghui Hu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Metallic Bipolar Plate Fabrication Process of Fuel Cell by Rubber Pad Forming and its Performance Evaluation

M. G. Jung et al.

ADVANCES IN ENGINEERING PLASTICITY XI (2013)

Add to Collection

Review Chemistry, Physical

Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review

A. P. Manso et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Add to Collection

Article Chemistry, Physical

Fabrication of metallic bipolar plate for proton exchange membrane fuel cells by rubber pad forming

Yanxiong Liu et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection

Review Green & Sustainable Science & Technology

A review on fuel cell technologies and power electronic interface

A. Kirubakaran et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)

Add to Collection

Review Chemistry, Physical

Review and analysis of PEM fuel cell design and manufacturing

V Mehta et al.

JOURNAL OF POWER SOURCES (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.