Journal
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
Volume 202, Issue -, Pages -Publisher
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ijheatmasstransfer.2022.123662
Keywords
Heat sink; Porous fin microchannel; Heat transfer augmentation; Straight plate -fin microchannel; Pressure drop; Micro -electronics cooling
Categories
Ask authors/readers for more resources
Porous-fin microchannel heat sinks have the potential to improve the thermal and hydraulic performances of microelectronic cooling systems. However, the reduced effective thermal conductivity of porous fins compared to solid fins can negatively impact the thermal performance of the microchannel heat sinks. This research confirms that replacing solid with porous fins can simultaneously enhance the thermal and hydraulic performances of microchannel heat sinks.
Porous-fin microchannel heat sinks offering high solid-fluid interfacial areas have the potential to be an integral part of future microelectronic cooling systems. Replacing solid with porous fins reduces the pressure drop penalty of the straight plate-fin microchannel heat sinks. However, prior research has shown that in some cases porous fins adversely affect the thermal performance of the microchannel heat sinks. The reduced effective thermal conductivity of the porous fins compared to the solid ones has been considered the main reason for the reduced thermal performance of porous-fin microchannels. In this work, a detailed study is conducted to assess the feasibility of using porous fins to simultaneously improve the thermal and hydraulic performances of the straight plate-fin microchannel heat sinks. Results revealed that the porous-fin microchannels outperform the solid-fin microchannels at small channel heights. However, at high channel heights, the low effective thermal conductivity of porous fins results in a weak vertical thermal diffusion. Consequently, replacing solid with porous fins degrades the thermal performance of the microchannel at high channel heights. Additionally, the porous-fin microchannels exhibit better thermal performance than the solid-fin microchannels at fin to fluid width ratios above 0.25. The increased coolant mass flow penetrated the porous fin section is the main reason for the enhanced heat transfer rate of the porous-fin microchannels at higher width ratios. Moreover, the porous-fin microchannels offer a lower pressure drop penalty than the solid-fin microchannels under all examined operating conditions. This research confirms the potential of substituting solid with porous fins to simultaneously improve the thermal and hydraulic performances of the straight plate-fin microchannel heat sinks. (c) 2022 Elsevier Ltd. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available