4.5 Article

Cross flow over two heated cylinders in tandem arrangements at subcritical Reynolds number using large eddy simulations

Related references

Note: Only part of the references are listed.
Article Nuclear Science & Technology

A dual-mesh hybrid Reynolds-averaged Navier-Stokes/Large eddy simulation study of the buoyant flow between coaxial cylinders

Abdelmagid E. A. Ali et al.

Summary: This study investigates the suitability of the dual-mesh method for buoyancy driven flow in a cylindrical annulus. The dual-mesh approach combines RANS and LES simulations to correct inaccurate results. The study shows that the dual-mesh method has the potential to yield more accurate results than pure RANS and pure coarse LES simulations.

NUCLEAR ENGINEERING AND DESIGN (2022)

Article Engineering, Civil

Turbulent length scales and budgets of Reynolds stress-transport for open-channel flows; friction Reynolds numbers (Reτ)=150, 400 and 1020

Umair Ahmed et al.

Summary: The study found that the free surface in open channel flows affects turbulence length scales mainly within the uppermost 10% of the channel, with further influence on Reynolds stresses. The cross-correlation length scales of streamwise and spanwise velocities were significantly affected by the free surface, leading to the flattening of turbulent eddies to a two-component limit.

JOURNAL OF HYDRAULIC RESEARCH (2021)

Article Energy & Fuels

Flow-Induced Vibrations of Single and Multiple Heated Circular Cylinders: A Review

Ussama Ali et al.

Summary: This study summarizes the fundamentals and major findings in the area of fluid-solid interaction, especially flow-induced vibrations. It highlights the important parameters influencing vibration characteristics and discusses the impact of FIV on heat exchangers design.

ENERGIES (2021)

Article Chemistry, Multidisciplinary

Thermal-Hydraulic Analysis of Parabolic Trough Collectors Using Straight Conical Strip Inserts with Nanofluids

Nabeel Abed et al.

Summary: This study numerically investigated the effects of swirl inserts and nanofluids on thermal-hydraulic performance of parabolic trough collectors with non-uniform heating. The combination of straight conical strips alone increased Nusselt number by 47.13%, while adding nanofluids with swirl generators further enhanced it by 57.48%. Different swirl generator designs showed varying levels of improvements, with the larger swirl generator using 6% SiO2 nanofluids proving to be the optimum configuration.

NANOMATERIALS (2021)

Article Computer Science, Interdisciplinary Applications

A dual-mesh hybrid RANS-LES simulation of the buoyant flow in a differentially heated square cavity with an improved resolution criterion

Abdelmagid Emad Abdelmagid Ali et al.

COMPUTERS & FLUIDS (2021)

Article Mechanics

Transition of wake flows past two circular or square cylinders in tandem

M. R. Rastan et al.

Summary: This paper investigates the flow transitions and regimes of two tandem cylinders under different Reynolds numbers and cylinder center-to-center spacing conditions. The study identifies the effects of flow interference on various flow transitions and provides guidance for future research.

PHYSICS OF FLUIDS (2021)

Article Thermodynamics

Numerical Simulations of Flow and Heat Transfer in a Wall-Bounded Pin Matrix

S. Benhamadouche et al.

FLOW TURBULENCE AND COMBUSTION (2020)

Article Engineering, Mechanical

Mixed convection heat transfer from a circular cylinder submerged in wake

Farhan Zafar et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Article Thermodynamics

Thermal performance evaluation of various nanofluids with non-uniform heating for parabolic trough collectors

Nabeel Abed et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

Article Nuclear Science & Technology

Emerging areas of nuclear power applications

Jong H. Kim et al.

NUCLEAR ENGINEERING AND DESIGN (2019)

Article Mechanics

A low Reynolds number flow and heat transfer topology of a cylinder in a wake

Farhan Zafar et al.

PHYSICS OF FLUIDS (2018)

Article Thermodynamics

Reynolds stress modelling of wake interference of two cylinders in tandem: Conventional vs. eddy-resolving closure

R. Maduta et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2017)

Article Engineering, Mechanical

Unsteady computation of flow field and convective heat transfer over tandem cylinders at subcritical Reynolds numbers

S. K. Dhiman et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)

Article Nuclear Science & Technology

Direct numerical simulation of a low momentum round jet in channel crossflow

Zhao Wu et al.

NUCLEAR ENGINEERING AND DESIGN (2017)

Article Engineering, Mechanical

Lift forces induced by phase lag between the vortex sheddings from two tandem bluff bodies

Md. Mahbub Alam

JOURNAL OF FLUIDS AND STRUCTURES (2016)

Article Engineering, Mechanical

Characterization of the turbulent bistable flow regime of a 2D bluff body wake disturbed by a small control cylinder

Vladimir Parezanovic et al.

EXPERIMENTS IN FLUIDS (2015)

Article Thermodynamics

A comparison and assessment of approaches for modelling flow over in-line tube banks

Hector Iacovides et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2014)

Article Engineering, Mechanical

The aerodynamics of a cylinder submerged in the wake of another

Md. Mahbub Alam

JOURNAL OF FLUIDS AND STRUCTURES (2014)

Article Engineering, Mechanical

Dependence of flow classification on the Reynolds number for a two-cylinder wake

C. W. Wong et al.

JOURNAL OF FLUIDS AND STRUCTURES (2014)

Article Mechanics

Stochastic response of the laminar flow past a flat plate under uncertain inflow conditions

Xingsi Han et al.

INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS (2012)

Article Mechanics

Experimental sensitivity analysis of the global properties of a two-dimensional turbulent wake

Vladimir Parezanovic et al.

JOURNAL OF FLUID MECHANICS (2012)

Article Mechanics

NUMERICAL SIMULATION OF FLOW OVER TWO CIRCULAR CYLINDERS IN TANDEM ARRANGEMENT

Behzad Ghadiri Dehkordi et al.

JOURNAL OF HYDRODYNAMICS (2011)

Article Mechanics

Secondary instabilities in the flow around two circular cylinders in tandem

Bruno S. Carmo et al.

JOURNAL OF FLUID MECHANICS (2010)

Review Engineering, Mechanical

Two circular cylinders in cross-flow: A review

D. Sumner

JOURNAL OF FLUIDS AND STRUCTURES (2010)

Article Engineering, Mechanical

Predictions of Turbulent Flow for the Impeller of a NASA Low-Speed Centrifugal Compressor

K. M. Guleren et al.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2010)

Article Engineering, Aerospace

Orthogonal blade-vortex interaction on a helicopter tail rotor

Antonio Filippone et al.

AIAA JOURNAL (2008)

Article Computer Science, Interdisciplinary Applications

Numerical simulation of generic side mirror of a car using large eddy simulation with polyhedral meshes

I. Afgan et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2008)

Article Thermodynamics

Numerical investigation of convective heat transfer in unsteady flow past two cylinders in tandem arrangements

Necati Mahir et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2008)

Article Engineering, Mechanical

Numerical investigation on flow around circular cylinders in tandem arrangement at a subcritical Reynolds number

T. Kitagawa et al.

JOURNAL OF FLUIDS AND STRUCTURES (2008)

Article Mechanics

Three-dimensionality effects in flow around two tandem cylinders

Georgios V. Papaioannou et al.

JOURNAL OF FLUID MECHANICS (2006)

Article Mechanics

Flow structure, momentum and heat transport in a two-tandem-cylinder wake

Y Zhou et al.

JOURNAL OF FLUID MECHANICS (2006)

Article Engineering, Mechanical

Strouhal numbers in the wake of two inline cylinders

G Xu et al.

EXPERIMENTS IN FLUIDS (2004)

Article Engineering, Mechanical

Numerical study of incompressible flow about fixed cylinder pairs

W Jester et al.

JOURNAL OF FLUIDS AND STRUCTURES (2003)

Article Engineering, Civil

Fluctuating fluid forces acting on two circular cylinders in a tandem arrangement at a subcritical Reynolds number

MM Alam et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2003)