☆ 4.7 Article

Twinning-induced dislocation and coordinated deformation behavior of a high-Nb TiAl alloy during high-cycle fatigue

INTERNATIONAL JOURNAL OF FATIGUE (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Evading the strength-ductility trade-off at room temperature and achieving ultrahigh plasticity at 800°C in a TiAl alloy

Guoming Zheng et al.

Summary: This study developed two new microstructures, T-T and T-D structures, in the Ti-43.5Al-4Nb-1Mo-0.18 (TNM) alloy, which significantly improved the alloy's strength and ductility. The formation of deformation twins and the promotion of dynamic recrystallization were found to play important roles in enhancing the plasticity at both room temperature and elevated temperatures.

ACTA MATERIALIA (2022)

Add to Collection

Article Engineering, Mechanical

Temperature dependent anisotropic mechanical behavior of TiAl based alloys

Balaji Selvarajou et al.

Summary: Titanium aluminide alloys exhibit excellent mechanical properties at high temperatures, but their microstructure shows highly anisotropic behavior, and the associated micromechanics are not well understood. In this study, crystal plasticity finite element techniques are used to establish structure-property relationships and reveal the complex interplay between lamellar orientation, structural length scale, temperature, and stress state. The results provide insights for improving damage tolerance in these alloys.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and nanomechanical behavior of individual phase in β-solidifying Ti-43Al-5Nb-3.5Cr-1Zr alloy

Haoran Song et al.

Summary: The influence of lamellar orientation on the nanohardness of alpha(2)/gamma lamellae in a beta-solidifying TiAl alloy was investigated. The results showed that the nanohardness of alpha(2)/gamma lamellae exhibited plastic anisotropy, which was determined by the oriented angle and the deformation characteristics of the alpha(2) and gamma phase. Furthermore, the nanohardness of the individual lamellar colony decreased with an increase in the oriented angle.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Engineering, Mechanical

Thermomechanical instability and deformation behavior of βo(ω) phase region in a Ti-43Al-8Nb-0.2W-0.2B alloy under high-temperature rotary-bending fatigue

Jieren Yang et al.

Summary: This study investigates the phase transformation and deformation behavior of the beta(o)(omega) phase region under high-temperature rotary-bending fatigue condition. It is found that under this condition, the omega(o) phase transforms into the beta(o) phase, and the newly formed beta(o) phase is coherent with the pre-existing beta(o) phase. Additionally, tensile stress promotes the phase transition of beta(o) to omega(o). The presence of disordered omega phase in the residual omega(o) phase suggests it may be a transition state in the phase transformation from omega(o) to beta(o).

INTERNATIONAL JOURNAL OF FATIGUE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Twin and twin intersection phenomena in a creep deformed microalloyed directionally solidified high Nb containing TiAl alloy

Xuesong Xu et al.

Summary: By means of directional solidification and microalloying, a TiAl alloy with a fine and uniform microstructure and continuous columnar crystals was obtained. The microalloyed high Nb containing TiAl alloy exhibited better creep properties at high temperature and stress conditions.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Twinning and twin intersections in grains of Ti-42.9Al-4.6Nb-2Cr

Runrun Xu et al.

Summary: This study utilized transmission electron microscopy to investigate the hot deformation behavior of a beta-solidifying gamma-TiAl alloy with a duplex structure. It found that twinning is closely linked to twin intersections in gamma grains. As isothermal compression proceeded, faults evolved into twins, with dislocations aiding in promoting twinning in gamma grains.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Fatigue behavior of additive manufactured 316L stainless steel under axial versus rotating-bending loading: Synergistic effects of stress gradient, surface roughness, and volumetric defects

Rakish Shrestha et al.

Summary: The study found that the fatigue behavior of LB-PBF 316L SS largely depends on the stress amplitude, with rotating-bending specimens showing better fatigue resistance at higher stress amplitudes compared to axial specimens. At lower stress amplitudes, surface roughness and volumetric defects become significant factors limiting the life of LB-PBF 316L SS.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Temperature dependent fatigue crack growth in forged TiAl alloys with nearly-lamellar and triplex microstructure

Motoki Sakaguchi et al.

Summary: The study found that at high temperatures, the fatigue crack growth resistance of the triplex microstructure is significantly increased, mainly due to the higher volume fraction of ductile p phase. Meanwhile, the fatigue crack growth threshold in different microstructures and temperatures is almost comparable and shows the same temperature dependency.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

An innovative way to fabricate γ -TiAl blades and their failure mechanisms under thermal shock

R. Gao et al.

Summary: In this study, near-net-shape gamma-TiAl blades were built using selective electron beam melting. The material exhibited excellent properties at 700 degrees C due to optimized process parameters. A new cracking mechanism was identified through thermal shock experiments at 900 degrees C, likely associated with layer-by-layer strategy and oxidation combined with surface topology.

SCRIPTA MATERIALIA (2021)

Add to Collection

Article Nanoscience & Nanotechnology

A β-solidifying TiAl alloy reinforced with ultra-fine Y-rich precipitates

Xu Gu et al.

Summary: The spark plasma sintered TiAl alloy exhibited a refined microstructure with uniform distribution of ultra-fine yttrium-rich precipitates, resulting in excellent tensile properties at room temperature.

SCRIPTA MATERIALIA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure formation and columnar to equiaxed transition during cold crucible directional solidification of a high-Nb TiAl alloy

Xuesong Xu et al.

Summary: In this study, the factors affecting the columnar to equiaxed transition (CET) in high-Nb TiAl alloys were investigated by fabricating Ti46Al7Nb0.4W0.6Cr0.1B alloy using cold crucible directional solidification (CCDS) technique. Results showed that the increase in pulling rate and fulfillment of heterogeneous nucleation conditions were the main factors influencing CET.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Role of growth rate on microstructure evolution, element distribution and nanohardness of phases in directionally solidified multiphase high-Nb TiAl alloy

Xuesong Xu et al.

Summary: This study investigated the effect of growth rate on the microstructure evolution, element distribution, and mechanical properties of a multiphase TiAl alloy. With increasing growth rates, the volume fractions of B2 and blocky gamma phases increased, and the content of Cr and Zr in the B2 phase showed a positive correlation with growth rate. Nanoindentation tests revealed that the nanohardness of different phases changed along with growth rates due to the enrichment or barrenness of alloying elements.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Engineering, Mechanical

Deformation of lamellar FCC-B2 nanostructures containing Kurdjumov-Sachs interfaces: Relation between interfacial structure and plasticity

Deep Choudhuri et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

New insights into high-temperature deformation and phase transformation mechanisms of lamellar structures in high Nb-containing TiAl alloys

Lin Song et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Engineering, Mechanical

Smooth and notch fatigue behavior of selectively laser melted Inconel 718 with as-built surfaces

Gianni Nicoletto

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

On the high creep strength of the W containing IRIS-TiAl alloy at 850 °C

Alain Couret et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Chemistry, Physical

Dislocation structures of B2 phase in Ti-42Al-6V-1Cr alloy deformed at room temperature and 800 °C

Hongwu Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Transverse deformation of a lamellar TiAl alloy at high temperature by in situ microcompression

Thomas Edward James Edwards et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds

Deep Choudhuri et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Chemistry, Physical

Fatigue crack growth behavior of wrought γ-based TiAl alloy containing β-phase

Loris Jonathan Signori et al.

INTERMETALLICS (2018)

Add to Collection

Article Engineering, Mechanical

Evolution of fatigue crack growth and fracture behavior in gamma titanium aluminide Ti-43.5Al-4Nb-1Mo-0.1B (TNM) forgings

Matthew S. Dahar et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Revisiting intrinsic brittleness and deformation behavior of B2 NiAl intermetallic compound: A first-principles study

Hui Xing et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Nanoscience & Nanotechnology

The cavitation of high Nb-containing TiAl alloys during tensile tests around BDTT

Bin Zhu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Low cycle fatigue, creep and creep-fatigue interaction behavior of a TiAl alloy at high temperatures

Chengli Dong et al.

SCRIPTA MATERIALIA (2018)

Add to Collection

Article Nanoscience & Nanotechnology

High-temperature rotary-bending fatigue characteristics of a high Nb-containing beta-gamma TiAl alloy

Yulun Wu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Chemistry, Physical

Structural stability and the alloying effect of TiB polymorphs in TiAl alloys

B. G. Liu et al.

INTERMETALLICS (2017)

Add to Collection

Article Chemistry, Physical

Fatigue crack growth and fracture behavior of as-cast Ti-43.5Al-4Nb-1Mo-0.1B (TNM) compared to Ti-48Al-2Nb-2Cr (4822)

Matthew S. Dahar et al.

INTERMETALLICS (2017)

Add to Collection

Article Chemistry, Physical

High tensile ductility and strength in the Ti-42Al-6V-1Cr alloy

Hongwu Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Room-temperature tensile properties of float-zone processed β-stabilized γ-TiAl(Nb,Cr,Zr) intermetallic

A. V. Kartavykh et al.

MATERIALS LETTERS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy

Xuzhou Gao et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Materials Science, Multidisciplinary

TiAl alloys in commercial aircraft engines

B. P. Bewlay et al.

MATERIALS AT HIGH TEMPERATURES (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure determined fracture behavior of a high Nb containing TiAl alloy

Zeen Wu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Local mechanical properties of the (β0+ω0) composite in multiphase titanium aluminides studied with nanoindentation at room and high temperatures

M. Kolb et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Chemistry, Physical

Polysynthetic twinned TiAl single crystals for high-temperature applications

Guang Chen et al.

NATURE MATERIALS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Deformation-induced internal stresses in multiphase titanium aluminide alloys

Roland Hoppe et al.

ACTA MATERIALIA (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Evolution of the ωo phase in a β-stabilized multi-phase TiAl alloy and its effect on hardness

Martin Schloffer et al.

ACTA MATERIALIA (2014)

Add to Collection

Article Chemistry, Physical

Fracture and R-curve behavior of an intermetallic β-stabilized TiAl alloy with different nearly lamellar microstructures

T. Leitner et al.

INTERMETALLICS (2014)

Add to Collection

Review Materials Science, Multidisciplinary

Design, Processing, Microstructure, Properties, and Applications of Advanced Intermetallic TiAl Alloys

Helmut Clemens et al.

ADVANCED ENGINEERING MATERIALS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Hard slip mechanisms in B2 CoTi

R. P. Mulay et al.

ACTA MATERIALIA (2012)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Tuning mechanical properties for β(B2)-containing TiAl intermetallics

Qiu Cong-zhang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Dislocation nucleation mechanisms from fcc/bcc incoherent interfaces

R. F. Zhang et al.

SCRIPTA MATERIALIA (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Strengthening of lamellar TiAl alloys by precipitation bands of β0 particles

Hanliang Zhu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Add to Collection

Review Multidisciplinary Sciences

Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale

K. Lu et al.

SCIENCE (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Determination of slip systems and their relation to the high ductility and fracture toughness of the B2DyCu intermetallic compound

G. H. Cao et al.

ACTA MATERIALIA (2007)

Add to Collection

Article Physics, Multidisciplinary

Dissociation of super-dislocations and the stacking fault energy in TiAl based alloys with Nb-doping

Y. Yuan et al.

PHYSICS LETTERS A (2006)

Add to Collection

Article Nanoscience & Nanotechnology

Slip resistance of interfaces and the strength of metallic multilayer composites

RG Hoagland et al.

SCRIPTA MATERIALIA (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical properties of single crystal YAg

AM Russell et al.

ACTA MATERIALIA (2004)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Al content and Nb addition on the strength and fault energy of TiAl alloys

WJ Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

Add to Collection

Article Nanoscience & Nanotechnology

A comparative analysis of low temperature deformation in B2 aluminides

TM Pollock et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)

Add to Collection

Article Chemistry, Physical

Relationship between tensile and primary creep properties of near γ-TiAl intermetallics

J Beddoes et al.

INTERMETALLICS (2001)

Add to Collection

Article Nanoscience & Nanotechnology

Twin intersection in a deformed TiAl alloy

JX Zhang et al.

SCRIPTA MATERIALIA (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Alloying mechanism of beta stabilizers in a TiAl alloy

FS Sun et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of stress ratio on fatigue crack growth in TiAl intermetallics at room and elevated temperatures

SJ Zhu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)

Add to Collection

Article Chemistry, Physical

TEM investigation of twin intersection in a Ti-45Al-9Nb-2.5Mn alloy deformed at room temperature

GL Chen et al.

INTERMETALLICS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.