Related references
Note: Only part of the references are listed.Grain growth and fatigue behaviors of GH4169 superalloy subjected to excessive ultrasonic surface rolling process
Jing Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
A high-entropy alloy with dislocation-precipitate skeleton for ultrastrength and ductility
Yongkun Mu et al.
ACTA MATERIALIA (2022)
Uniting tensile ductility with ultrahigh strength via composition undulation
Heng Li et al.
NATURE (2022)
Nanotwinning-assisted dynamic recrystallization at high strains and strain rates
Ahmed A. Tiamiyu et al.
NATURE MATERIALS (2022)
Hole surface texture reconstructed with laser shock peening and effect on fretting behavior
Huiqing Gu et al.
WEAR (2022)
Very high cycle fretting fatigue of Nimonic 80A modified by laser cladding with Stellite X-40 and In625/20 % WC
Jian Wang et al.
SURFACE & COATINGS TECHNOLOGY (2022)
Optimization of residual stresses generated by ultrasonic nanocrystalline surface modification through analytical modeling and data-driven prediction
Jingyi Zhao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Study of the effect of surface roughness on fatigue strength of GH4169 based on indirect evaluation of the notch root radius
Fang Quan et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Investigations of the effects of combination treatments on the fretting fatigue resistance of GH4169 superalloy at an elevated temperature
Jingchen Wang et al.
SURFACE & COATINGS TECHNOLOGY (2021)
The effects of shot peening, laser shock peening and ultrasonic nanocrystal surface modification on the fatigue strength of Inconel 718
Erfan Maleki et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Numerical and experimental investigations on fretting fatigue properties of GH4169 superalloy at the elevated temperature
Jingchen Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Improving plain and fretting fatigue resistance of A100 steel using ultrasonic nanocrystal surface modification
Weidong Zhao et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Gradient cell-structured high-entropy alloy with exceptional strength and ductility
Qingsong Pan et al.
SCIENCE (2021)
The effect of ultrasonic surface rolling process on the fretting fatigue property of GH4169 superalloy
Jing Yang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Mechanical and corrosion fatigue behaviors of gradient structured 7B50-T7751 aluminum alloy processed via ultrasonic surface rolling
Xingchen Xu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Experimental and numerical investigations on the influence of cold expansion on low cycle fatigue life of bolt holes in aeroengine superalloy disk at elevated temperature
Hui Liu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
An investigation of fretting fatigue behavior and mechanism in 17-4PH stainless steel with gradient structure produced by an ultrasonic surface rolling process
Dan Liu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fretting fatigue failure behavior of Nickel-based single crystal superalloy dovetail specimen in contact with powder metallurgy pads at high temperature
Shouyi Sun et al.
TRIBOLOGY INTERNATIONAL (2020)
Effect of ultrasonic surface rolling on surface layer properties and fretting wear properties of titanium alloy Ti5Al4Mo6V2Nb1Fe
Zhaojun Ren et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Plain fatigue and fretting fatigue behaviors of 17-4PH steel subjected to ultrasonic surface rolling process: A comparative study
Dan Liu et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Microstructures and rolling contact fatigue behaviors of 17Cr2Ni2MoVNb steel under combined ultrasonic surface rolling and shot peening
Yalong Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Thermal stress relaxation in shot peened and laser peened nickel-based superalloy
K. S. Chin et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Fretting fatigue and shot peening: a multiaxial fatigue criterion including residual stress relaxation
Sabrina Vantadori et al.
TRIBOLOGY INTERNATIONAL (2020)
Effect of laser shock processing with post-machining and deep cryogenic treatment on fatigue life of GH4169 super alloy
Jianfei Sun et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fretting fatigue characteristics of Ti-6Al-4V alloy with a gradient nanostructured surface layer induced by ultrasonic surface rolling process
Chengsong Liu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Improving fatigue performance of Ti-6Al-4V alloy via ultrasonic surface rolling process
Chengsong Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Improving the fretting and corrosion fatigue performance of 300M ultra-high strength steel using the ultrasonic surface rolling process
Weidong Zhao et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Microstructure-mechanical property correlation in shot peened and vibro-peened Ni-based superalloy
Dharmesh Kumar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
On the influence of ultrasonic surface rolling process on surface integrity and fatigue performance of Ti-6Al-4V alloy
Chengsong Liu et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Influence of ultrasonic rolling on surface integrity and corrosion fatigue behavior of 7B50-T7751 aluminum alloy
Xingchen Xu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Investigation of fretting fatigue behavior and micro-structure evolution in LZ50 steel subjected to torsional load
Zhibiao Xu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Investigation of shot peening combined with plasma-sprayed CuNiIn coating on the fretting fatigue behavior of Ti-6Al-4V dovetail joint specimens
Qi Yang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Improved fatigue resistance of gradient nanograined Cu
Jianzhou Long et al.
ACTA MATERIALIA (2019)
The effects of ultrasonic nanocrystal surface modification temperature on the mechanical properties and fretting wear resistance of Inconel 690 alloy
A. Amanov et al.
APPLIED SURFACE SCIENCE (2018)
Fatigue behavior prediction and analysis of shot peened mild carbon steels
Erfan Maleki et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Extra strengthening and work hardening in gradient nanotwinned metals
Zhao Cheng et al.
SCIENCE (2018)
On the effect of shot-peening on fretting fatigue of A17075-T6 under cyclic normal contact loading
G. H. Majzoobi et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Investigation on the fretting fatigue behaviors of Ti-6A1-4V dovetail joint specimens treated with shot-peening
Qi Yang et al.
WEAR (2017)
An investigation on fretting fatigue mechanism under complex cyclic loading conditions
Xin Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
In-situ SEM observation and crystal plasticity finite element simulation of fretting fatigue crack formation in Ni-base single-crystal superalloys
Qi-Nan Han et al.
TRIBOLOGY INTERNATIONAL (2016)
Effects of WC-17Co Coating Combined with Shot Peening Treatment on Fatigue Behaviors of TC21 Titanium Alloy
Dongxing Du et al.
MATERIALS (2016)
Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer
H. W. Huang et al.
ACTA MATERIALIA (2015)
Effects of combined plasma chromizing and shot peening on the fatigue properties of a Ti6Al4V alloy
Shouming Yu et al.
APPLIED SURFACE SCIENCE (2015)
Fretting fatigue tests on shrink-fit specimens and investigations into the strength enhancement induced by deep rolling
L. Bertini et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Enhancement of the fatigue strength of underwater wet welds by grinding and ultrasonic impact treatment
Wenbin Gao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Residual stresses after deep rolling of a torsion bar made from high strength steel
Jasenko Perenda et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Influence of residual stresses on the fatigue crack growth from surface anomalies in a nickel-based superalloy
L. Doremus et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Mechanical properties and thermal stability of nanocrystallized pure aluminum produced by surface mechanical attrition treatment
Yong Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Evaluation of the Mechanical Properties of AA 6063 Processed by Severe Plastic Deformation
Davoud Mashhadi Jafarlou et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Fretting wear and fretting fatigue behaviors of diamond-like carbon and graphite-like carbon films deposited on Ti-6Al-4V alloy
Dongxing Du et al.
APPLIED SURFACE SCIENCE (2014)
Cryogenic ultrahigh strain rate deformation induced hybrid nanotwinned microstructure for high strength and high ductility
Chang Ye et al.
JOURNAL OF APPLIED PHYSICS (2014)
Effects of ultrasonic nanocrystalline surface modification (UNSM) technique on the tribological behavior of sintered Cu-based alloy
Auezhan Amanov et al.
TRIBOLOGY INTERNATIONAL (2014)
Fatigue behavior of columnar-grained Cu with preferentially oriented nano scale twins
Q. S. Pan et al.
ACTA MATERIALIA (2013)
Mechanical properties of a medical β-type titanium alloy with specific microstructural evolution through high-pressure torsion
H. Yilmazer et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
The strengthening mechanism of a nickel-based alloy after laser shock processing at high temperatures
Yinghong Li et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2013)
Plain and fretting fatigue behavior of Ti6Al4V alloy coated with TiAlN thin film
F. Yildiz et al.
TRIBOLOGY INTERNATIONAL (2013)
The mechanisms of thermal engineered laser shock peening for enhanced fatigue performance
Yiliang Liao et al.
ACTA MATERIALIA (2012)
Deformation twinning in nanocrystalline materials
Y. T. Zhu et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Fretting wear and friction reduction of CP titanium and Ti-6Al-4V alloy by ultrasonic nanocrystalline surface modification
Auezhan Amanov et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Fatigue performance improvement in AISI 4140 steel by dynamic strain aging and dynamic precipitation during warm laser shock peening
Chang Ye et al.
ACTA MATERIALIA (2011)
Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper
T. H. Fang et al.
SCIENCE (2011)
Fretting fatigue properties of plasma nitrided AISI 316 L stainless steel: Experiments and finite element analysis
F. Yildiz et al.
TRIBOLOGY INTERNATIONAL (2011)
A direct comparison in the fatigue resistance enhanced by surface severe plastic deformation and shot peening in a C-2000 superalloy
Leon L. Shaw et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effect of Plasma Nitriding Environment and Time on Plain Fatigue and Fretting Fatigue Behavior of Ti-6Al-4V
M. Mubarak Ali et al.
TRIBOLOGY LETTERS (2010)
Effect of shot peening on fretting fatigue of Ti811 alloy at elevated temperature
Xiaohua Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
Fretting fatigue of laser shock peened Ti-6Al-4V
S. Srinivasan et al.
TRIBOLOGY INTERNATIONAL (2009)
The effects of laser peening and shot peening on fretting fatigue in Ti-6Al-4V coupons
Kevin K. Liu et al.
TRIBOLOGY INTERNATIONAL (2009)
Performance of plasma sprayed and detonation gun sprayed Cu-Ni-In coatings on Ti-6Al-4V under plain fatigue and fretting fatigue loading
B. Rajasekaran et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Residual stress relaxation of deep-rolled austenitic steel
I. Nikitin et al.
SCRIPTA MATERIALIA (2008)
Effects of shot-peening and re-shot-peening on four-point bend fatigue behavior of Ti-6Al-4V
X. P. Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Effect of temperature on cyclic deformation behavior and residual stress relaxation of deep rolled under-aged aluminium alloy AA6110
P. Juijerm et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Influence of plasma nitriding on plain fatigue and fretting fatigue behaviour of AISI 304 austenitic stainless steel
S. Ganesh Sundara Raman et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Residual stress relaxation of deep-rolled Al-Mg-Si-Cu alloy during cyclic loading at elevated temperatures
P. Juijerm et al.
SCRIPTA MATERIALIA (2006)
Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment
T Roland et al.
SCRIPTA MATERIALIA (2006)
Relaxation of residual stress in shot peened Udimet 720Li under high temperature isothermal fatigue
A Evans et al.
INTERNATIONAL JOURNAL OF FATIGUE (2005)
Fretting fatigue of single crystal/polycrystalline nickel subjected to blade/disk contact loading
H Murthy et al.
ACTA ASTRONAUTICA (2005)
Ultrahigh strength and high electrical conductivity in copper
L Lu et al.
SCIENCE (2004)
An in situ transmission electron microscope study of the thermal stability of near-surface microstructures induced by deep rolling and laser-shock peening
I Altenberger et al.
SCRIPTA MATERIALIA (2003)
An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment
NR Tao et al.
ACTA MATERIALIA (2002)
Contact fatigue failure analysis of shot-peened gears
M Guagliano et al.
ENGINEERING FAILURE ANALYSIS (2002)