4.7 Article

Carboxymethyl cellulose/sodium alginate beads incorporated with calcium carbonate nanoparticles and bentonite for phosphate recovery

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Biochar/Mg-Al spinel carboxymethyl cellulose-La hydrogels with cationic polymeric layers for selective phosphate capture

Xiangcheng Shan et al.

Summary: The newly fabricated composite adsorbent integrating multiple components exhibited enhanced phosphate capturing performance, good reusability, and selectivity, with the adsorption mechanism involving electrostatic attraction, ligand exchange, and inner-sphere complexation.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Engineering, Chemical

Hollow polyethyleneimine/carboxymethyl cellulose beads with abundant and accessible sorption sites for ultra-efficient chromium (VI) and phosphate removal

Hua-Rong Yang et al.

Summary: A novel millimeter-scale hollow polyethyleneimine/carboxymethylcellulose sorbent with high adsorption capacity for Cr(VI) and phosphates was successfully prepared by adjusting the usage of polyethyleneimine. The sorbent exhibited exceptional performance and stability, showing promise for anionic pollutant removal with its controllable fabrication process and excellent mechanical properties.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Biochemistry & Molecular Biology

Synthesis and characterization of a new meso-tetrakis (2,4,6-trimethylphenyl) porphyrinto) zinc(II) supported sodium alginate gel beads for improved adsorption of methylene blue dye

Raoudha Soury et al.

Summary: The study successfully prepared and characterized a new composite gel bead by chemically modifying a biopolymer. It was found that the composite beads exhibited excellent adsorption capacity for removing cationic dye from water.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Article Engineering, Environmental

Calcium-based seeded precipitation for simultaneous removal of fluoride and phosphate: Its optimization using BBD-RSM and defluoridation mechanism

Carl Francis Zulueta Lacson et al.

Summary: This study optimized a seeded precipitation process using recovered CaCO3 for treating wastewater with high concentrations of fluoride and co-anions. The critical factors such as precipitant concentration, seed dosage, and pH were analyzed, with Ca2+ concentration being the most significant parameter for fluoride and phosphate removal. The study achieved high defluoridation efficiency even at extreme anion concentrations and demonstrated a complex defluoridation mechanism using seeded precipitation.

JOURNAL OF WATER PROCESS ENGINEERING (2022)

Article Chemistry, Multidisciplinary

Fabrication of Porous Phosphate/Carbonate Composites: Smart Fertilizer with Bimodal Controlled-Release Kinetics and Glyphosate Adsorption Ability

Pratchayaporn Yukhajon et al.

Summary: A simple method of preparing porous sponge-like phosphate fertilizers with two-stage phosphate release capability was presented. The fertilizers showed effects on plant growth similar to commercial fertilizers and could remove excess glyphosate from the environment.

ACS OMEGA (2022)

Article Engineering, Chemical

Phosphate Removal with pH-Responsive Calcium Carbonate Nanoparticles

Hafiz Gadafi Abdul Aziz et al.

Summary: This study successfully improved the removal of phosphate by producing and modifying calcium carbonate nanoparticles. The incorporation of iron increased the surface area of CaCO3, resulting in significantly enhanced phosphate removal. CaCO3-Fe exhibited different adsorption behavior for phosphate compared to traditional pH-responsive materials.

CHEMICAL ENGINEERING & TECHNOLOGY (2022)

Article Chemistry, Physical

Binary dyes adsorption onto novel designed magnetic clay-biopolymer hydrogel involves characterization and adsorption performance: Kinetic, equilibrium, thermodynamic, and adsorption mechanism

Ayoub Shahinpour et al.

Summary: In this work, a novel high-performance magnetic bio-based hydrogel was designed, characterized, and used for the simultaneous adsorption of Alizarin red and Congo red dyes. The hydrogel showed efficient adsorption capacities and potential applications in drug delivery, selective detection, hyperthermia/thermal ablation, and other products.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Review Polymer Science

The Fabrication of Alginate-Carboxymethyl Cellulose-Based Composites and Drug Release Profiles

Svetlana Morozkina et al.

Summary: Hydrogels based on natural water-soluble polysaccharides have gained attention for their favorable characteristics, including high water-holding capacity, lack of toxicity, and biodegradability. Sodium alginate and cellulose are commonly used polysaccharides in various industries, such as food processing, pharmaceuticals, and biomedical applications. This review collects various methods for preparing compositions using sodium alginate and cellulose, and analyzes the drug release profile from these polymer matrices.

POLYMERS (2022)

Article Biotechnology & Applied Microbiology

The removal of inorganic phosphate from water using carboxymethyl cellulose-iron hydrogel beads

David Ure et al.

Summary: The study developed CMC-Fe hydrogel for phosphate adsorption, demonstrating its high binding capacity. The hydrogel showed promise in reducing phosphate content in agricultural drainage, suggesting its potential application in environmental remediation.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2021)

Article Biochemistry & Molecular Biology

Carboxymethyl cellulose nanocomposite beads as super-efficient catalyst for the reduction of organic and inorganic pollutants

Nujud Maslamani et al.

Summary: CMC/CuO-NiO nanocomposite beads were prepared using a facile and environmentally friendly method, exhibiting high catalytic activity in the reduction of various organic and inorganic pollutants. Characterization of the beads was conducted using various techniques and their catalytic performance was found to be superior to CuO-NiO alone.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Article Materials Science, Multidisciplinary

Production of low-cost adsorbent with small particle size from calcium carbonate rich residue carbonatation cake and their high performance phosphate adsorption applications

Hasan Arslanoglu

Summary: This study investigated the removal of phosphorus from aqueous solutions using carbonatisation cake. The maximum phosphate adsorption capacity was found to be 65.16 mg g(-1). Calcines produced by heating the carbonated cake to 600 degrees C were also effective in removing phosphate from wastewaters.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Chemistry, Physical

Highly effective removal of phosphate from complex water environment with porous Zr-bentonite alginate hydrogel beads: Facile synthesis and adsorption behavior study

Huan Xi et al.

Summary: Novel alginate immobilized Zr-bentonite hydrogel beads (NH-SA-ZrBT) synthesized in this study exhibit high stability and adsorption selectivity for phosphate removal. The adsorbent has a maximum adsorption capacity of 63.61 mg/g and retains 92.2% after five adsorption-desorption cycles, showing potential for application in complex wastewater treatment.

APPLIED CLAY SCIENCE (2021)

Article Biochemistry & Molecular Biology

Facile synthesis of Zr(IV)-crosslinked carboxymethyl cellulose/carboxymethyl chitosan hydrogel using PEG as pore-forming agent for enhanced phosphate removal

Jingjing Wang et al.

Summary: Zr(IV)-crosslinked carboxymethyl cellulose/carboxymethyl chitosan hydrogels were prepared as adsorbents for phosphate removal. The adsorption capacity of the hydrogel for PO4 increased with the content of PEG, reaching equilibrium within 400 minutes. The adsorption mechanism involved electrostatic interaction and ion exchange.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Article Green & Sustainable Science & Technology

Highly selective adsorption of phosphate from high-salinity water environment using MgO-loaded and sodium alginate-immobilized bentonite beads

Huan Xi et al.

Summary: The study focused on the effective removal of phosphorus using SA-MgO@Bt beads, which showed high adsorption capacity, removal efficiency, and selectivity in a wide pH range, surpassing other adsorbents. In fixed-bed column experiments, the phosphate concentration could be significantly reduced.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Chemistry, Multidisciplinary

Carbon dioxide conversion into calcium carbonate nanoparticles using membrane gas absorption

Why-Ling Tan et al.

Summary: Mineral carbonation in an aqueous solution is a practical strategy in CCUS, and wet carbonation can be used to produce calcium carbonate nanoparticles with vast applications. The use of porous membranes in MGA enhances the mass transfer of CO2 gas into liquid absorbent for the carbonation of calcium-rich solution.

JOURNAL OF CO2 UTILIZATION (2021)

Article Engineering, Environmental

Modified biochar for phosphate adsorption in environmentally relevant conditions

Yimin Huang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Environmental Sciences

Removal of phosphate from wastewater by modified bentonite entrapped in Ca-alginate beads

Xiaoyi Xu et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2020)

Review Chemistry, Multidisciplinary

A critical review to bridge the gaps between carbon capture, storage and use of CaCO3

Why-Ling Tan et al.

JOURNAL OF CO2 UTILIZATION (2020)

Article Biochemistry & Molecular Biology

Novel hollow beads of carboxymethyl cellulose/ZSM-5/ZIF-8 for dye removal from aqueous solution in batch and continuous fixed bed systems

Najme Marsiezade et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Article Engineering, Environmental

In situ fabrication of magnetic particles decorated biopolymeric composite beads for the selective remediation of phosphate and nitrate from aqueous medium

Perumal Karthikeyan et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Article Engineering, Environmental

Understanding and improving the reusability of phosphate adsorbents for wastewater effluent polishing

Prashanth Suresh Kumar et al.

WATER RESEARCH (2018)

Article Multidisciplinary Sciences

Preparation of core-shell structured CaCO3 microspheres as rapid and recyclable adsorbent for anionic dyes

Mengen Zhao et al.

ROYAL SOCIETY OPEN SCIENCE (2017)

Article Engineering, Environmental

Fabrication of metal ions cross-linked alginate assisted biocomposite beads for selective phosphate removal

Ilango Aswin Kumar et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2017)

Article Engineering, Chemical

Stability of CaCO3 in Ca(OH)2 solution

Sevgi Kilic et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2016)

Article Polymer Science

Hydrogel Beads Based on Carboxymethyl Cellulose for Removal Heavy Metal Ions

Shaoping Yang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

Article Engineering, Environmental

Adsorptive removal of phosphate from aqueous solutions using raw and calcinated dolomite

S Karaca et al.

JOURNAL OF HAZARDOUS MATERIALS (2006)

Article Materials Science, Multidisciplinary

The viscosity and zeta potential of bentonite dispersions in presence of anionic surfactants

T Yalçin et al.

MATERIALS LETTERS (2002)