☆ 4.7 Review

Classification, processing, and applications of bioink and 3D bioprinting: A detailed review

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

Related references

Note: Only part of the references are listed.

Review Cell Biology

From 3D printing to 3D bioprinting: the material properties of polymeric material and its derived bioink for achieving tissue specific architectures

Nihal Engin Vrana et al.

Summary: The application of 3D printing technologies in the fields of biological tissues and cells requires innovation to address critical design challenges, with 3D bioprinting playing a key role in tissue engineering. This review covers various aspects of 3D bioprinting, current state-of-the-art solutions, and illustrative technologies supporting its development, focusing on examples and trends in tissue engineering applications.

CELL AND TISSUE BANKING (2022)

Add to Collection

Article Biochemistry & Molecular Biology

An osteogenic bioink composed of alginate, cellulose nanofibrils, and polydopamine nanoparticles for 3D bioprinting and bone tissue engineering

Seunghyun Im et al.

Summary: Bioprinting is an emerging technology for manufacturing cell-laden 3D scaffolds to support cell growth and differentiation. This study formulated various nanocomposite hydrogel-based bioinks using natural and biocompatible biomaterials and found that a bioink containing 1.5% alginate and 1.5% TOCNF, with or without 0.5% PDANP, demonstrated suitable printability for 3D printing and induced significant osteogenesis in vitro.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Biochemistry & Molecular Biology

3D Bioprinting of Gelatin-Xanthan Gum Composite Hydrogels for Growth of Human Skin Cells

Beatrice Piola et al.

Summary: In this study, a crosslinked 3D printable hydrogel based on gelatin and xanthan gum was developed for use as a scaffold for cell growth and as a wound dressing. These hydrogels showed different porosity and degradation time and exhibited biocompatibility.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Add to Collection

Review Biochemistry & Molecular Biology

Smart Bioinks for the Printing of Human Tissue Models

Zeina Maan et al.

Summary: 3D bioprinting technology has the potential to revolutionize tissue engineering in regenerative medicine. Smart bioinks are needed to efficiently generate human bioprinted tissues. This article discusses the potential of incorporating micro and nanotechnologies into bioinks to enhance their properties, and explores future research directions.

BIOMOLECULES (2022)

Add to Collection

Article Engineering, Multidisciplinary

3D printed hydrogel for articular cartilage regeneration

Xue Yang et al.

Summary: Three-dimensional printed hydrogel is a promising approach in cartilage tissue engineering due to its similarity to the extracellular matrix and its ability to fabricate 3D cell culture scaffolds. Various hydrogels, both natural and synthetic, have been tested for 3D printing in vitro articular cartilage tissues. The advancement in materials and printing techniques allows for the fabrication of delicate cartilage structures on multiple scales. Stimuli-responsive hydrogels and their application prospects in tissue engineering are also discussed in this review. The development of novel composite hydrogels that meet the requirements of native articular cartilage is crucial for further advancement in the field.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Review Biochemistry & Molecular Biology

Current Advances in 3D Bioprinting for Cancer Modeling and Personalized Medicine

Nicolas Germain et al.

Summary: Three-dimensional bioprinting can mimic the tumor microenvironment by producing complex, multi-cellular, and reproducible constructs. This review discusses different 3D bioprinting technologies and their applications.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Add to Collection

Review Cell Biology

Cell Aggregate Assembly through Microengineering for Functional Tissue Emergence

Gozde Eke et al.

Summary: 3D cell aggregates provide more realistic cellular interactions and self-evolving capabilities compared to cell suspensions or monolayers, making them powerful tools for generating microtissues. Developing specific methodologies to organize these cell aggregates into 3D architectures has become essential for regenerative medicine and pharmaceutical screening purposes.

CELLS (2022)

Add to Collection

Review Biotechnology & Applied Microbiology

3D Bioprinted Scaffolds for Bone Tissue Engineering: State-Of-The-Art and Emerging Technologies

Zahra Yazdanpanah et al.

Summary: Treating large bone defects is challenging and bone tissue engineering using 3D bioprinted scaffolds has emerged as a promising approach. This review highlights the latest developments in the use of bioprinted scaffolds for critical-sized defect treatment, including the biomaterials, cells, and growth factors used in bioink formulation and bioprinting techniques. The review also discusses current limitations and emerging approaches in this field.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2022)

Add to Collection

Review Engineering, Biomedical

Nanocomposite bioinks for 3D bioprinting

Yanli Cai et al.

Summary: This review paper focuses on the recent developments in cell-laden nanocomposite bioinks for 3D bioprinting and their effects on the properties and performance of the bioinks. The reinforcement mechanisms and interactions between cells and nano-materials are discussed, with an emphasis on bone and cartilage tissue engineering applications. The limitations and future prospects of current cell-laden nanocomposite bioinks are also addressed.

ACTA BIOMATERIALIA (2022)

Add to Collection

Review Biotechnology & Applied Microbiology

Natural/Synthetic Polymer Materials for Bioink Development

Seo Hyung Moon et al.

Summary: This paper introduces the selection and properties of bioink materials in 3D bioprinting, with a focus on the applications of natural polymers and synthetic polymers.

BIOTECHNOLOGY AND BIOPROCESS ENGINEERING (2022)

Add to Collection

Review Biochemistry & Molecular Biology

A Guide to Polysaccharide-Based Hydrogel Bioinks for 3D Bioprinting Applications

Maria C. Teixeira et al.

Summary: Three-dimensional (3D) bioprinting is an innovative technology that allows the fabrication of living constructs using cell-laden inks. Among the various types of bioinks, hydrogels derived from polysaccharides have gained significant attention due to their similarities with the extracellular matrix and tunable properties. This review focuses on the recent advances in polysaccharide-based hydrogel bioinks for 3D bioprinting, highlighting their properties, advantages, and limitations, with a classification based on their sources.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Add to Collection

Article Polymer Science

Effect of Cellulose Nanofibers' Structure and Incorporation Route in Waterborne Polyurethane-Urea Based Nanocomposite Inks

Izaskun Larraza et al.

Summary: Waterborne, polyurethane-urea (WBPUU) based inks with cellulose nanofibers (CNF) as a rheological modulator were prepared by two methods: ex situ and in situ. In situ addition allows proximity of WBPUU particles and CNF, favoring interactions and chemical bonds formation.

POLYMERS (2022)

Add to Collection

Article Engineering, Biomedical

Bioprinting and regeneration of auricular cartilage using a bioactive bioink based on microporous photocrosslinkable acellular cartilage matrix

Litao Jia et al.

Summary: Tissue engineering offers new opportunities and strategies for auricular reconstruction, and the use of multi-nozzle bioprinting technology can develop biocompatible auricular equivalents with precise shapes and low immunogenicity.

BIOACTIVE MATERIALS (2022)

Add to Collection

Article Polymer Science

Preparation of Chitosan/Recombinant Human Collagen-Based Photo-Responsive Bioinks for 3D Bioprinting

Yang Yang et al.

Summary: This study developed novel photo-responsive bioinks for 3D bioprinting using reliable Type-III recombinant human collagen and chitosan. The addition of chitosan allowed for tunable mechanical properties and degradation of the bioinks. In vitro tests confirmed the biocompatibility of these bioinks and their potential in constructing different tissues through 3D bioprinting.

GELS (2022)

Add to Collection

Article Engineering, Biomedical

Droplet-based bioprinting enables the fabrication of cell-hydrogel-microfibre composite tissue precursors

Marcin Kotlarz et al.

Summary: Composites offer the option of combining the benefits of their constituents to achieve unique material properties in tissue engineering applications. In this study, a droplet-based bioprinting system called ReJI was used to integrate a cell-laden hydrogel with a microfibrous mesh. The cell-hydrogel-fibre composites showed high cell viability and promoted cell-cell and cell-biomaterial interactions. The fibrous component of the composites exhibited high swelling properties and quick release of calcium ions.

BIO-DESIGN AND MANUFACTURING (2022)

Add to Collection

Article Engineering, Biomedical

Properties and Applications of PDMS for Biomedical Engineering: A Review

Ines Miranda et al.

Summary: This review provides an overview of the properties of PDMS and its applications in the field of micro and nanoengineering. PDMS is widely used in biomedical applications due to its excellent optical, electrical, and mechanical properties, as well as biocompatibility. The introduction of the soft-lithography technique has facilitated the rapid prototyping of micro and nanostructures using PDMS, leading to advances in microfluidics, electronics, and biomedicine.

JOURNAL OF FUNCTIONAL BIOMATERIALS (2022)

Add to Collection

Article Polymer Science

Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review

Ahmed Fatimi et al.

Summary: Three-dimensional printing is considered an important technology in tissue engineering, especially due to the growing demand for organ replacement and tissue regeneration. In 3D bioprinting, the ink used is impregnated with cells, allowing for immediate scaffold cellularization and generation of complex structures. This study comprehensively explores the use of bio-inks based on natural polymers in 3D bioprinting, discussing progress, techniques and approaches, as well as limitations and future trends.

GELS (2022)

Add to Collection

Review Engineering, Biomedical

Emerging trends and prospects of electroconductive bioinks for cell-laden and functional 3D bioprinting

Harish K. Handral et al.

BIO-DESIGN AND MANUFACTURING (2022)

Add to Collection

Article Engineering, Biomedical

3D cell-printing of biocompatible and functional meniscus constructs using meniscus-derived bioink

Suhun Chae et al.

Summary: The study developed a 3D cell-printed meniscus construct using a bioink with high controllability and durable architectural integrity, which exhibited biocompatibility, excellent mechanical properties, and improved biological functionality similar to that of the native meniscus, showing potential for meniscus regeneration in clinical practice.

BIOMATERIALS (2021)

Add to Collection

Article Medicine, Research & Experimental

Hybrid Three-Dimensional-Printed Ear Tissue Scaffold With Autologous Cartilage Mitigates Soft Tissue Complications

Brian Chang et al.

Summary: The study evaluated the use of 3D-printed auricular scaffolds with and without cartilage inserts in a rodent model, showing that adding cartilage inserts can enhance clinical and histological outcomes.

LARYNGOSCOPE (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Biofabrication of skin tissue constructs using alginate, gelatin and diethylaminoethyl cellulose bioink

Lakshmi T. Somasekharan et al.

Summary: Utilizing alginate, gelatin, and diethylaminoethyl cellulose as the base, a bioink formulation for 3D bioprinting and biofabrication of skin tissue equivalents was successfully developed. The bioink proved to be printable and stable, with cell-laden 3D bioprinted constructs demonstrating excellent cell viability and biomimetic tissue histology.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Editorial Material Nanoscience & Nanotechnology

Bioprinted mini kidneys

Christine Horejs

NATURE REVIEWS MATERIALS (2021)

Add to Collection

Review Chemistry, Applied

Key advances of carboxymethyl cellulose in tissue engineering & 3D bioprinting applications

Allen Zennifer et al.

Summary: This review discusses the properties of CMC and its current advances in physical and chemical modifications, as well as its potential applications in tissue engineering. Furthermore, it elaborates on the unique features of CMC in 3D bioprinting applications and highlights future prospects for broader applications in tissue engineering and 3D/4D bioprinting.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Review Polymer Science

3D Printable Electrically Conductive Hydrogel Scaffolds for Biomedical Applications: A Review

Sandya Shiranthi Athukorala et al.

Summary: Electrically conductive hydrogels (ECHs) are a promising class of biomaterials for a wide range of biomedical applications, with 3D printing being an advanced technique for rapid fabrication of future biomedical implants and devices with versatile designs and adjustable functionalities. This review provides an overview of state-of-the-art 3D printed ECHs, discussing mechanisms of electrical conductivity, design considerations, and recent advances in formulation of 3D printable bioinks. Challenges and limitations of 3D printing of ECHs are identified, along with highlighting new 3D printing-based hybrid methods for selective deposition and controlled nanostructure fabrication.

POLYMERS (2021)

Add to Collection

Article Engineering, Biomedical

Accelerated degradation of HAP/PLLA bone scaffold by PGA blending facilitates bioactivity and osteoconductivity

Cijun Shuai et al.

Summary: The addition of PGA into HAP/PLLA scaffold accelerated the degradation process, leading to increased degradation rate and pore formation, which promoted the deposition and growth of bone-like apatite as well as provided a favorable environment for osteoblast adhesion and proliferation. This led to excellent bone defect repair capacity demonstrated by the formation of abundant new bone tissue and blood vessel tissue, ultimately bridging both ends of the defect region after 8 weeks of implantation.

BIOACTIVE MATERIALS (2021)

Add to Collection

Article Engineering, Biomedical

3D bioprinted neural tissue constructs for spinal cord injury repair

Xiaoyun Liu et al.

Summary: 3D bioprinting has been used to fabricate NSC-laden scaffolds for in vivo SCI repair, utilizing a novel bioink with fast gelation and high NSC viability. This method promotes axon regeneration and reduces glial scar deposition, leading to significant locomotor recovery in SCI model rats. It represents a versatile strategy for precise engineering of the central nervous system and other neural tissues for regenerative medicine applications.

BIOMATERIALS (2021)

Add to Collection

Article Chemistry, Applied

Chitosan hydrogels in 3D printing for biomedical applications

Mina Rajabi et al.

Summary: Tissue engineering and regenerative medicine have progressed to a new stage due to recent advancements in biology, material sciences, and 3D printing. Chitosan-based hydrogels, widely used in biomedical applications, hold promise for future development when combined with 3D printing technology. This combination has the potential to create next generation biomedical implants.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Chemistry, Applied

Extrusion bioprinting of hydroxyethylcellulose-based bioink for cervical tumor model

Antonina Gospodinova et al.

Summary: This study demonstrates the extrusion printing of highly viscous and thixotropic hydroxyethylcellulose-based bioinks blended with various concentrations of sodium alginate (SA) and embedded with HeLa cells. The cell viability was shown to be inversely proportional to the relative SA content, and biocompatibility of the hydrogel matrix supported cell proliferation resulting in a larger number of cells. Cell viability was mainly affected by extrusion printing itself, with some cell death occurring during embedding in the hydrogels. After embedding the HeLa cells in blends containing 1 and 2.5 % SA, cell viability was not significantly affected by residence time before bioink extrusion.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Translational Applications of Hydrogels

Santiago Correa et al.

Summary: Advances in hydrogel technology have led to diverse applications in medicine and environmental engineering, providing solutions for various diseases and medical conditions. Collaboration across disciplines is essential for the development of contemporary hydrogels to accomplish complex biological tasks in different fields.

CHEMICAL REVIEWS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Bioprinting Via a Dual-Gel Bioink Based on Poly(Vinyl Alcohol) and Solubilized Extracellular Matrix towards Cartilage Engineering

Mohsen Setayeshmehr et al.

Summary: This study developed dual-component biomaterial inks based on PVA and SDCM for cartilage bioprinting. By optimizing the preparation methods and cross-linking techniques of PVA-A/SDCM and PVA-Nb/SDCM, the bioprintability and biocompatibility of the bioinks were enhanced.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)

Add to Collection

Article Materials Science, Biomaterials

Low-temperature 3D printing of collagen and chitosan composite for tissue engineering

Hairui Suo et al.

Summary: By controlling the temperature, a series of tunable hybrid collagen/chitosan bioinks with significantly improved printability were prepared and successfully printed into scaffolds with regulated properties. Chitosan could decrease the swelling ratio of the printed scaffolds, while the degradation rate increased with collagen proportion, and the values of Young's modulus and tensile strength increased with chitosan proportion. Scaffolds containing 2% (m/v) collagen and 2% (m/v) chitosan showed a homogeneous and compact honeycomb-like structure, demonstrating the strengthening effect of chitosan.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Chemistry, Applied

3D bioprinting of a cell-laden antibacterial polysaccharide hydrogel composite

Hadi Rastin et al.

Summary: The study developed a cell-laden antibacterial bioink with gallium that exhibited potent antibacterial activity towards various bacteria, while also supporting cellular functions, making it suitable for skin tissue engineering.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Review Biophysics

3D printing of PEEK and its composite to increase biointerfaces as a biomedical material- A review

Bankole I. Oladapo et al.

Summary: This research showcases the potential of PEEK material in medical applications, emphasizing its biological macromolecular behaviors as a bone implant material and the optimal 3D printing process for PEEK and CHAp in medical applications.

COLLOIDS AND SURFACES B-BIOINTERFACES (2021)

Add to Collection

Review Biochemical Research Methods

Bioprinting of kidney in vitro models: cells, biomaterials, and manufacturing techniques

Maaike F. J. Fransen et al.

Summary: The number of patients with end-stage renal disease is increasing, with dialysis and organ transplantation as the only treatments available. Research in kidney disease and alternative therapies is crucial, with in vitro models being essential. Bioprinting techniques show potential but face challenges in creating functional kidney tissues.

3D BIOPRINTING (2021)

Add to Collection

Review Biochemistry & Molecular Biology

Tissue-Specific Decellularized Extracellular Matrix Bioinks for Musculoskeletal Tissue Regeneration and Modeling Using 3D Bioprinting Technology

Wonbin Park et al.

Summary: This review discusses the advances in musculoskeletal tissue engineering using 3D bioprinting technology and decellularized extracellular matrix bioink. It focuses on in vivo regeneration and in vitro modeling of musculoskeletal tissue, while also addressing current breakthroughs, limitations, and future prospects.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)

Add to Collection

Article Pharmacology & Pharmacy

Three-dimensional printing of gastro-floating tablets using polyethylene glycol diacrylate-based photocurable printing material

Xiao Lin et al.

Summary: This study demonstrates the improvement of extruded 3D printing materials by using various hydrogels, optimizing print material composition and process parameters. Hydroxypropyl methylcellulose K100M was identified to enhance the shear thinning and self-supporting properties of printing materials, crucial for printability. Additionally, it was found that the use of photocurable materials in extrusion printing allows for the preparation of customized oral preparations with complex internal structures and adjustable properties.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Review Polymer Science

The Application of Polycaprolactone in Three-Dimensional Printing Scaffolds for Bone Tissue Engineering

Xiangjun Yang et al.

Summary: PCL is widely used in bone tissue engineering for its good biocompatibility and slow degradation rate, and can be blended with other polymers and hydrogels to improve its properties. 3D printing techniques are utilized to fabricate PCL-based composite scaffolds for various clinical applications.

POLYMERS (2021)

Add to Collection

Review Pharmacology & Pharmacy

3D Printing of Pharmaceutical Application: Drug Screening and Drug Delivery

Ge Gao et al.

Summary: Advances in 3D printing technology and tailored biomaterials have enabled precise fabrication of biological components and complex 3D geometrics, as well as the development of customized drug screening and drug delivery systems in pharmaceutical applications. This review discusses the necessary elements for advanced pharmaceutical techniques, state-of-the-art 3D printing technology, and limitations of traditional approaches in drug screening and drug delivery systems.

PHARMACEUTICS (2021)

Add to Collection

Review Engineering, Biomedical

Natural and Synthetic Bioinks for 3D Bioprinting

Roghayeh Khoeini et al.

Summary: Bioprinting technology offers precise control over the geometric and compositional attributes of tissue constructs, using an automated approach to fabricate functional and mechanically stable structures. Bioinks, consisting of hydrogel materials and living cells, play a critical role in encapsulating appropriate cells to create functional tissue structures.

ADVANCED NANOBIOMED RESEARCH (2021)

Add to Collection

Article Engineering, Biomedical

3D Bioprinted Spheroidal Droplets for Engineering the Heterocellular Coupling between Cardiomyocytes and Cardiac Fibroblasts

Raven El Khoury et al.

Summary: In this study, a high-throughput scalable 3D bioprinted cardiac spheroidal droplet-organoid model was designed and developed, offering potential applications in drug screening and regenerative engineering. The model demonstrated robust biocompatibility, structural stability, and supported long-term growth and proliferation of cardiac cells.

CYBORG AND BIONIC SYSTEMS (2021)

Add to Collection

Review Biotechnology & Applied Microbiology

Natural Biomaterials and Their Use as Bioinks for Printing Tissues

Claire Benwood et al.

Summary: Extrusion bioprinting, the most common form of bioprinting, can create personalized tissues for drug testing and cancer research using various materials. This paper reviews the properties and functions of natural bioinks in hard and soft tissue engineering, highlighting the importance of multi-component bioinks and potential future research directions.

BIOENGINEERING-BASEL (2021)

Add to Collection

Review Cell & Tissue Engineering

3D bioprinting for skin tissue engineering: Current status and perspectives

Tingting Weng et al.

Summary: 3D bioprinting is a rapidly reliable method for skin regeneration, with the ability to customize skin shape and high resolution, flexibility, and reproducibility. It shows great potential in the fabrication of tissue-engineered skin.

JOURNAL OF TISSUE ENGINEERING (2021)

Add to Collection

Review Materials Science, Biomaterials

Applications of 3D bioprinting in tissue engineering: advantages, deficiencies, improvements, and future perspectives

Baosen Tan et al.

Summary: 3D bioprinting technology has made tremendous progress in the field of tissue engineering over the past decade, allowing for the fabrication of personalized biological constructs with precise geometric designability to bridge the gap between engineered and natural tissues. The updated applications of this technology in tissue engineering, including bone, cartilage, vascular grafts, skin, neural, heart, liver, and lung tissue, showcase its advantages in rapid prototyping, precise delivery of cell-laden materials, and highly controllable microenvironment engineering. However, there are still technical deficiencies in terms of mechanical properties and cell behaviors of 3D bioprinted constructs, which need corresponding improvements for further development.

JOURNAL OF MATERIALS CHEMISTRY B (2021)

Add to Collection

Article Engineering, Biomedical

Bioinks for 3D Bioprinting: A Scientometric Analysis of Two Decades of Progress

Sara Cristina Pedroza-Gonzalez et al.

Summary: This scientometric analysis examines the development and use of bioinks for 3D bioprinting in the period from January 2000 to June 2019. The main considerations for bioink applications include cost, availability, practicality, and basic biological factors. Extrusion bioprinting is currently the most popular technique, with bioinks commonly used for generic characterization and cartilage bioprinting applications. Despite advancements in functional bioinks, the field is still in early stages with alginate and gelatin methacryloyl being the most commonly used hydrogels.

INTERNATIONAL JOURNAL OF BIOPRINTING (2021)

Add to Collection

Review Engineering, Biomedical

Three-dimensional printing for heart diseases: clinical application review

Yanyan Ma et al.

Summary: Heart diseases remain a top threat to human health, and the treatment of these diseases is constantly evolving. 3D printing technology allows for a more precise understanding of the complex anatomy associated with heart diseases and can serve as valuable educational tools and for simulation of surgical interventions. The clinical applications of 3D printing in treating heart diseases are diverse, but there are also limitations and unmet needs that need to be addressed in this context.

BIO-DESIGN AND MANUFACTURING (2021)

Add to Collection

Review Engineering, Biomedical

The rheology of direct and suspended extrusion bioprinting

Megan E. Cooke et al.

Summary: Bioprinting is a promising field for producing implantable tissues and organs, but the availability of functional bioinks is an obstacle to success. Extrusion bioprinting, the most commonly used technique, requires high-viscosity solutions to ensure good shape fidelity of printed tissue constructs. Developments in bioink formulations and the use of suspended printing have been made to overcome rheological limitations.

APL BIOENGINEERING (2021)

Add to Collection

Review Materials Science, Biomaterials

Functional silk fibroin hydrogels: preparation, properties and applications

Haiyan Zheng et al.

Summary: Traditional silk protein hydrogels have limitations in terms of structure and functionality, but the development of functional silk protein hydrogels presents opportunities to overcome these limitations, attracting attention from scholars worldwide.

JOURNAL OF MATERIALS CHEMISTRY B (2021)

Add to Collection

Review Engineering, Biomedical

3D Bioprinting at the Frontier of Regenerative Medicine, Pharmaceutical, and Food Industries

Qasem Ramadan et al.

Summary: 3D printing technology has driven a significant paradigm shift in various industrial domains, with particular success in biomedical and healthcare applications. The integration of 3D printing into tissue engineering has led to innovative solutions, although there are still capabilities and limitations that need to be addressed.

FRONTIERS IN MEDICAL TECHNOLOGY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Synthetic polymer-derived single-network inks/bioinks for extrusion-based 3D printing towards bioapplications

Sonu Kumar

Summary: 3D printing, also known as additive manufacturing, has revolutionized the field of manufacturing, particularly in tissue engineering and regenerative medicine. However, there is still a challenge in developing diverse ink materials for optimized fabrication of complex structures.

MATERIALS ADVANCES (2021)

Add to Collection

Review Chemistry, Multidisciplinary

3D Printed Neural Regeneration Devices

Daeha Joung et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Characterization of natural gums via elemental and chemometric analyses, synthesis of silver nanoparticles, and biological and catalytic applications

Nargis Jamila et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Engineering, Biomedical

Bio-inspired hydrogel composed of hyaluronic acid and alginate as a potential bioink for 3D bioprinting of articular cartilage engineering constructs

Cristina Antich et al.

ACTA BIOMATERIALIA (2020)

Add to Collection

Article Chemistry, Medicinal

Low-temperature solvent-based 3D printing of PLGA: a parametric printability study

Emad Naseri et al.

DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Polydimethylsiloxane (PDMS)-containing hydrogels prepared by micellar copolymerization in aqueous media

Yinlei Lin et al.

MATERIALS LETTERS (2020)

Add to Collection

Review Engineering, Biomedical

Grafting of 3D Bioprinting to In Vitro Drug Screening: A Review

Jing Nie et al.

ADVANCED HEALTHCARE MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Bioprinting: From Tissue and Organ Development to in Vitro Models

Carlos Mota et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Polymer Science

Xanthan Gum-Konjac Glucomannan Blend Hydrogel for Wound Healing

Andreia Alves et al.

POLYMERS (2020)

Add to Collection

Review Polymer Science

Recent Advances in Natural Gum-Based Biomaterials for Tissue Engineering and Regenerative Medicine: A Review

Reza Mohammadinejad et al.

POLYMERS (2020)

Add to Collection

Article Polymer Science

A universal self-eroding sacrificial bioink that enables bioprinting at room temperature

Levent Aydin et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2020)

Add to Collection

Article Engineering, Biomedical

Dynamic peptide-folding mediated biofunctionalization and modulation of hydrogels for 4D bioprinting

Christopher Aronsson et al.

BIOFABRICATION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Polysaccharide-Based Bioink Formulation for 3D Bioprinting of an In Vitro Model of the Human Dermis

Tanja Zidaric et al.

NANOMATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Use of Biomaterials for 3D Printing by Fused Deposition Modeling Technique: A Review

Sanjita Wasti et al.

FRONTIERS IN CHEMISTRY (2020)

Add to Collection

Article Engineering, Biomedical

Stereolithography 3D Bioprinting Method for Fabrication of Human Corneal Stroma Equivalent

S. Sharareh Mahdavi et al.

ANNALS OF BIOMEDICAL ENGINEERING (2020)

Add to Collection

Article Chemistry, Applied

Dual-crosslinked methylcellulose hydrogels for 3D bioprinting applications

Ji Youn Shin et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Multidisciplinary Sciences

Noninvasive in vivo 3D bioprinting

Yuwen Chen et al.

SCIENCE ADVANCES (2020)

Add to Collection

Article Engineering, Biomedical

Three dimensional polyvinyl alcohol scaffolds modified with collagen for HepG2 cell culture

Di Meng et al.

JOURNAL OF BIOMATERIALS APPLICATIONS (2020)

Add to Collection

Article Pharmacology & Pharmacy

Bioprinting and Preliminary Testing of Highly Reproducible Novel Bioink for Potential Skin Regeneration

Forough Hafezi et al.

PHARMACEUTICS (2020)

Add to Collection

Review Engineering, Biomedical

Designing Decellularized Extracellular Matrix-Based Bioinks for 3D Bioprinting

Alperen Abaci et al.

ADVANCED HEALTHCARE MATERIALS (2020)

Add to Collection

Article Engineering, Biomedical

Hyaluronic Acid-Based Bioink Composition Enabling 3D Bioprinting and Improving Quality of Deposited Cartilaginous Extracellular Matrix

Julia Hauptstein et al.

ADVANCED HEALTHCARE MATERIALS (2020)

Add to Collection

Review Polymer Science

Synthetic Polymers for Organ 3D Printing

Fan Liu et al.

POLYMERS (2020)

Add to Collection

Editorial Material Multidisciplinary Sciences

3D bioprinting of cells, tissues and organs

Madhuri Dey et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Review Biotechnology & Applied Microbiology

Safety Considerations in 3D Bioprinting Using Mesenchymal Stromal Cells

Lucy Belk et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

Add to Collection

Article Biochemistry & Molecular Biology

3D Bioprinting of Human Adipose-Derived Stem Cells and Their Tenogenic Differentiation in Clinical-Grade Medium

Deborah Stanco et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2020)

Add to Collection

Review Biotechnology & Applied Microbiology

Biologically Modified Polyether Ether Ketone as Dental Implant Material

Zhangyu Ma et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

Add to Collection

Article Biochemistry & Molecular Biology

High-resolution 3D printing of xanthan gum/nanocellulose bio-inks

Hossein Baniasadi et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

3D organ printing: Review on operational challenges and constraints

P. Sreekala et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Advanced Bioink for 3D Bioprinting of Complex Free-Standing Structures with High Stiffness

Yawei Gu et al.

BIOENGINEERING-BASEL (2020)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Three-dimensional bio-printing and bone tissue engineering: technical innovations and potential applications in maxillofacial reconstructive surgery

Muhja Salah et al.

MAXILLOFACIAL PLASTIC AND RECONSTRUCTIVE SURGERY (2020)

Add to Collection

Review Materials Science, Biomaterials

Rational design and latest advances of polysaccharide-based hydrogels for wound healing

Hao Hu et al.

BIOMATERIALS SCIENCE (2020)

Add to Collection

Review Engineering, Biomedical

Assessment methodologies for extrusion-based bioink printability

Gregory Gillispie et al.

BIOFABRICATION (2020)

Add to Collection

Article Engineering, Biomedical

Sacrificial microgel-laden bioink-enabled 3D bioprinting of mesoscale pore networks

Lei Shao et al.

BIO-DESIGN AND MANUFACTURING (2020)

Add to Collection

Article Medicine, Research & Experimental

3D printed in vitro tumor tissue model of colorectal cancer

Haoxiang Chen et al.

THERANOSTICS (2020)

Add to Collection

Review Engineering, Biomedical

Bioengineering models of female reproduction

Maria E. Zubizarreta et al.

BIO-DESIGN AND MANUFACTURING (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Recent advances and challenges in materials for 3D bioprinting

Hongli Mao et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2020)

Add to Collection

Article Engineering, Biomedical

3D printed oxidized alginate-gelatin bioink provides guidance for C2C12 muscle precursor cell orientation and differentiation via shear stress during bioprinting

Thomas Distler et al.

BIOFABRICATION (2020)

Add to Collection

Article Engineering, Biomedical

Evaluation of sterilisation methods for bio-ink components: gelatin, gelatin methacryloyl, hyaluronic acid and hyaluronic acid methacryloyl

Cathal D. O'Connell et al.

BIOFABRICATION (2019)

Add to Collection

Article Multidisciplinary Sciences

Electrospun patterned porous scaffolds for the support of ovarian follicles growth: a feasibility study

Liliana Liverani et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Multidisciplinary Sciences

In Situ Bioprinting of Autologous Skin Cells Accelerates Wound Healing of Extensive Excisional Full-Thickness Wounds

Mohammed Albanna et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Engineering, Biomedical

Current and Future Perspectives on Skin Tissue Engineering: Key Features of Biomedical Research, Translational Assessment, and Clinical Application

Justine R. Yu et al.

ADVANCED HEALTHCARE MATERIALS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Scaffold Techniques and Designs in Tissue Engineering Functions and Purposes: A Review

Abdalla Eltom et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Process development of fabricating ceramic core using 3D printing technique

Hye-Yeong Park et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

Add to Collection

Article Materials Science, Biomaterials

Evaluation of mechanical strength and bone regeneration ability of 3D printed kagome-structure scaffold using rabbit calvarial defect model

Se-Hwan Lee et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Add to Collection

Article Multidisciplinary Sciences

Novel approach for the assessment of ovarian follicles infiltration in polymeric electrospun patterned scaffolds

Nathalie Raffel et al.

PLOS ONE (2019)

Add to Collection

Article Multidisciplinary Sciences

BIOMEDICINE Multivascular networks and functional intravascular topologies within biocompatible hydrogels

Bagrat Grigoryan et al.

SCIENCE (2019)

Add to Collection

Review Biophysics

Application of conducting polymers to wound care and skin tissue engineering: A review

Milena Talikowska et al.

BIOSENSORS & BIOELECTRONICS (2019)

Add to Collection

Review Chemistry, Analytical

The Applications of 3D Printing for Craniofacial Tissue Engineering

Owen Tao et al.

MICROMACHINES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Double-Network Polyurethane-Gelatin Hydrogel with Tunable Modulus for High-Resolution 3D Bioprinting

Cheng-Tien Hsieh et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Biochemistry & Molecular Biology

Three-Dimensionally-Printed Polyether-Ether-Ketone Implant with a Cross-Linked Structure and Acid-Etched Microporous Surface Promotes Integration with Soft Tissue

Xiaoke Feng et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Preparation and characterization of pH-responsive sodium alginate/humic acid/konjac hydrogel for L-ascorbic acid controlled release

Yuhua Niu et al.

MATERIALS EXPRESS (2019)

Add to Collection

Review Pharmacology & Pharmacy

Strategies for Hyaluronic Acid-Based Hydrogel Design in Drug Delivery

Sonia Trombino et al.

PHARMACEUTICS (2019)

Add to Collection

Review Cell & Tissue Engineering

Bioartificial Organ Manufacturing Technologies

Xiaohong Wang

CELL TRANSPLANTATION (2019)

Add to Collection

Article Materials Science, Biomaterials

3D Printing of Neural Tissues Derived from Human Induced Pluripotent Stem Cells Using a Fibrin-Based Bioink

Emily Abelseth et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

3D Bioprinting: principles, fantasies and prospects

N. Sigaux et al.

JOURNAL OF STOMATOLOGY ORAL AND MAXILLOFACIAL SURGERY (2019)

Add to Collection

Article Chemistry, Physical

Acrylonitrile Butadiene Styrene and Polypropylene Blend with Enhanced Thermal and Mechanical Properties for Fused Filament Fabrication

Muhammad Harris et al.

MATERIALS (2019)

Add to Collection

Article Physics, Applied

Tissue-engineering of vascular grafts containing endothelium and smooth-muscle using triple-coaxial cell printing

Ge Gao et al.

APPLIED PHYSICS REVIEWS (2019)

Add to Collection

Review Cell Biology

Smart polymers for cell therapy and precision medicine

Hung-Jin Huang et al.

JOURNAL OF BIOMEDICAL SCIENCE (2019)

Add to Collection

Article Engineering, Biomedical

The future of skin toxicology testing - Three-dimensional bioprinting meets microfluidics

Wei Long Ng et al.

INTERNATIONAL JOURNAL OF BIOPRINTING (2019)

Add to Collection

Article Public, Environmental & Occupational Health

Polyether ether ketone (PEEK) and its 3D printed implants applications in medical field: An overview

Abid Haleem et al.

CLINICAL EPIDEMIOLOGY AND GLOBAL HEALTH (2019)

Add to Collection

Review Biotechnology & Applied Microbiology

Bioprinting for Liver Transplantation

Christina Kryou et al.

BIOENGINEERING-BASEL (2019)

Add to Collection

Article Engineering, Biomedical

3D printable hyaluronic acid-based hydrogel for its potential application as a bioink in tissue engineering

Insup Noh et al.

BIOMATERIALS RESEARCH (2019)

Add to Collection

Article Engineering, Biomedical

Three-dimensional graphene oxide-coated polyurethane foams beneficial to myogenesis

Yong Cheol Shin et al.

JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2018)

Add to Collection

Article Engineering, Biomedical

Recent Advances in Extrusion-Based 3D Printing for Biomedical Applications

Jesse K. Placone et al.

ADVANCED HEALTHCARE MATERIALS (2018)

Add to Collection

Article Engineering, Biomedical

3D bioprinted functional and contractile cardiac tissue constructs

Zhan Wang et al.

ACTA BIOMATERIALIA (2018)

Add to Collection

Review Pharmacology & Pharmacy

3D bioprinting of functional tissue models for personalized drug screening and in vitro disease modeling

Xuanyi Ma et al.

ADVANCED DRUG DELIVERY REVIEWS (2018)

Add to Collection

Article Chemistry, Applied

Influence of different divalent ions cross-linking sodium alginate-polyacrylamide hydrogels on antibacterial properties and wound healing

Qian Zhou et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Synthesis and evaluation on pH-and temperature-responsive chitosan-p(MAA-co-NIPAM) hydrogels

S. Z. M. Rasib et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Add to Collection

Article Engineering, Biomedical

Synthesis and functionalization of chitosan built hydrogel with induced hydrophilicity for extended release of sparingly soluble drugs

Faheem Ullah et al.

JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2018)

Add to Collection

Review Polymer Science

PDMS with designer functionalities-Properties, modifications strategies, and applications

Marc P. Wolf et al.

PROGRESS IN POLYMER SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel

Ahasan Habib et al.

MATERIALS (2018)

Add to Collection

Review Materials Science, Biomaterials

Bioinks for 3D bioprinting: an overview

P. Selcan Gungor-Ozkerim et al.

BIOMATERIALS SCIENCE (2018)

Add to Collection

Article Materials Science, Biomaterials

Processing and Properties of Chitosan Inks for 3D Printing of Hydrogel Microstructures

Qinghua Wu et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)

Add to Collection

Article Materials Science, Biomaterials

Processing and Properties of Chitosan Inks for 3D Printing of Hydrogel Microstructures

Qinghua Wu et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)

Add to Collection

Review Pharmacology & Pharmacy

3D bioprinting of skin tissue: From pre-processing to final product evaluation

Wei-Cheng Yan et al.

ADVANCED DRUG DELIVERY REVIEWS (2018)

Add to Collection

Article Multidisciplinary Sciences

Optimization of cell-laden bioinks for 3D bioprinting and efficient infection with influenza A virus

Johanna Berg et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Materials Science, Biomaterials

Ultraflexible Self-Healing Guar Gum-Glycerol Hydrogel with Injectable, Antifreeze, and Strain-Sensitive Properties

Xiaofeng Pan et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

3D bioprinting of gellan gum and poly (ethylene glycol) diacrylate based hydrogels to produce human-scale constructs with high-fidelity

Dongwei Wu et al.

MATERIALS & DESIGN (2018)

Add to Collection

Review Pharmacology & Pharmacy

Extrusion-Based 3D Printing for Pharmaceuticals: Contemporary Research and Applications

Mohammed S. Algahtani et al.

CURRENT PHARMACEUTICAL DESIGN (2018)

Add to Collection

Article Engineering, Biomedical

Evaluation of a polyvinyl alcohol-alginate based hydrogel for precise 3D bioprinting

Fei Yu et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)

Add to Collection

Review Chemistry, Physical

An Introduction to 3D Bioprinting: Possibilities, Challenges and Future Aspects

Zeljka P. Kacarevic et al.

MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

Bioprinted 3D Primary Human Intestinal Tissues Model Aspects of Native Physiology and ADME/Tox Functions

Lauran R. Madden et al.

ISCIENCE (2018)

Add to Collection

Review Emergency Medicine

Bioprinting of skin constructs for wound healing

Peng He et al.

BURNS & TRAUMA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Mussel-Inspired Adhesive and Conductive Hydrogel with Long-Lasting Moisture and Extreme Temperature Tolerance

Lu Han et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Review Cell & Tissue Engineering

Bioprinting of tissue engineering scaffolds

Patrick Rider et al.

JOURNAL OF TISSUE ENGINEERING (2018)

Add to Collection

Article Engineering, Biomedical

3D Bioprinting for Tissue and Organ Fabrication

Yu Shrike Zhang et al.

ANNALS OF BIOMEDICAL ENGINEERING (2017)

Add to Collection

Article Engineering, Biomedical

Soft 3D-Printed Phantom of the Human Kidney with Collecting System

Fabian Adams et al.

ANNALS OF BIOMEDICAL ENGINEERING (2017)

Add to Collection

Review Biochemistry & Molecular Biology

A Review on Konjac Glucomannan Gels: Microstructure and Application

Dan Yang et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)

Add to Collection

Review Biochemistry & Molecular Biology

Advances in Skin Regeneration Using Tissue Engineering

Komal Vig et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)

Add to Collection

Article Multidisciplinary Sciences

A bioprosthetic ovary created using 3D printed microporous scaffolds restores ovarian function in sterilized mice

Monica M. Laronda et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Article Engineering, Biomedical

3D-printed vascular networks direct therapeutic angiogenesis in ischaemia

T. Mirabella et al.

NATURE BIOMEDICAL ENGINEERING (2017)

Add to Collection

Review Biochemistry & Molecular Biology

3-D bioprinting technologies in tissue engineering and regenerative medicine: Current and future trends

Elliot S. Bishop et al.

GENES & DISEASES (2017)

Add to Collection

Review Engineering, Biomedical

3D bioprinting for drug discovery and development in pharmaceutics

Weijie Peng et al.

ACTA BIOMATERIALIA (2017)

Add to Collection

Article Engineering, Biomedical

Cell sheet based bioink for 3D bioprinting applications

E. Bakirci et al.

BIOFABRICATION (2017)

Add to Collection

Article Chemistry, Physical

Polyvinylpyrrolidone-Based Bio-Ink Improves Cell Viability and Homogeneity during Drop-On-Demand Printing

Wei Long Ng et al.

MATERIALS (2017)

Add to Collection

Review Biotechnology & Applied Microbiology

The bioink: A comprehensive review on bioprintable materials

Monika Hospodiuk et al.

BIOTECHNOLOGY ADVANCES (2017)

Add to Collection

Article Chemistry, Physical

3D Printing of Cytocompatible Water-Based Light-Cured Polyurethane with Hyaluronic Acid for Cartilage Tissue Engineering Applications

Ming-You Shie et al.

MATERIALS (2017)

Add to Collection

Review Engineering, Biomedical

A comprehensive review on droplet-based bioprinting: Past, present and future

Hemanth Gudapati et al.

BIOMATERIALS (2016)

Add to Collection

Review Biotechnology & Applied Microbiology

3D bioprinting for engineering complex tissues

Christian Mandrycky et al.

BIOTECHNOLOGY ADVANCES (2016)

Add to Collection

Review Pharmacology & Pharmacy

Application areas of 3D bioprinting

Ibrahim T. Ozbolat et al.

DRUG DISCOVERY TODAY (2016)

Add to Collection

Article Biochemistry & Molecular Biology

Fabrication of nonwoven fabrics consisting of gelatin nanofibers cross-linked by glutaraldehyde or N-acetyl-D-glucosamine by aqueous method

Tetsuya Furuike et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)

Add to Collection

Article Biochemistry & Molecular Biology

Functional properties of chitosan built nanohydrogel with enhanced glucose-sensitivity

Faheem Ullah et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)

Add to Collection

Article Engineering, Biomedical

Bio-printing cell-laden Matrigel-agarose constructs

Rong Fan et al.

JOURNAL OF BIOMATERIALS APPLICATIONS (2016)

Add to Collection

Review Medicine, Research & Experimental

Recent advances in bioprinting techniques: approaches, applications and future prospects

Jipeng Li et al.

JOURNAL OF TRANSLATIONAL MEDICINE (2016)

Add to Collection

Article Biotechnology & Applied Microbiology

A 3D bioprinting system to produce human-scale tissue constructs with structural integrity

Hyun-Wook Kang et al.

NATURE BIOTECHNOLOGY (2016)

Add to Collection

Article Multidisciplinary Sciences

Three-dimensional bioprinting of thick vascularized tissues

David B. Kolesky et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Add to Collection

Article Chemistry, Physical

Characterization of the crosslinking kinetics of multi-arm poly(ethylene glycol) hydrogels formed via Michael-type addition

Jiwon Kim et al.

SOFT MATTER (2016)

Add to Collection

Review Cell & Tissue Engineering

A Review of Three-Dimensional Printing in Tissue Engineering

Nick A. Sears et al.

TISSUE ENGINEERING PART B-REVIEWS (2016)

Add to Collection

Article Materials Science, Biomaterials

A simultaneous 3D printing process for the fabrication of bioceramic and cell-laden hydrogel core/shell scaffolds with potential application in bone tissue regeneration

Naren Raja et al.

JOURNAL OF MATERIALS CHEMISTRY B (2016)

Add to Collection

Article Materials Science, Biomaterials

3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering

Stephanie Rhee et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

Add to Collection

Article Materials Science, Biomaterials

3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding

Thomas J. Hinton et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

Add to Collection

Article Materials Science, Biomaterials

3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering

Stephanie Rhee et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

Add to Collection

Article Materials Science, Biomaterials

3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding

Thomas J. Hinton et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

Add to Collection

Review Engineering, Biomedical

3D bioprinting technology for regenerative medicine applications

Dhakshinamoorthy Sundaramurthi et al.

INTERNATIONAL JOURNAL OF BIOPRINTING (2016)

Add to Collection

Article Engineering, Biomedical

A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage

Andrew C. Daly et al.

BIOFABRICATION (2016)

Add to Collection

Article Engineering, Biomedical

A versatile bioink for three-dimensional printing of cellular scaffolds based on thermally and photo-triggered tandem gelation

Matti Kesti et al.

ACTA BIOMATERIALIA (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Direct 3D Printing of Shear-Thinning Hydrogels into Self-Healing Hydrogels

Christopher B. Highley et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Biofabrication of Cell-Loaded 3D Spider Silk Constructs

Kristin Schacht et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Add to Collection

Review Biochemical Research Methods

Supramolecular Guest-Host Interactions for the Preparation of Biomedical Materials

Christopher B. Rodell et al.

BIOCONJUGATE CHEMISTRY (2015)

Add to Collection

Article Biochemistry & Molecular Biology

3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications

Kajsa Markstedt et al.

BIOMACROMOLECULES (2015)

Add to Collection

Review Engineering, Biomedical

Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels

Kan Yue et al.

BIOMATERIALS (2015)

Add to Collection

Review Biotechnology & Applied Microbiology

Bioprinting a cardiac valve

Soumen Jana et al.

BIOTECHNOLOGY ADVANCES (2015)

Add to Collection

Review Chemistry, Applied

Review on biomedical and bioengineering applications of cellulose sulfate

Qilei Zhang et al.

CARBOHYDRATE POLYMERS (2015)

Add to Collection

Review Polymer Science

3D bioprinting of photocrosslinkable hydrogel constructs

Ruben F. Pereira et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2015)

Add to Collection

Review Materials Science, Biomaterials

Classification, processing and application of hydrogels: A review

Faheem Ullah et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Peptide Bioink: Self-Assembling Nanofibrous Scaffolds for Three-Dimensional Organotypic Cultures

Yihua Loo et al.

NANO LETTERS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Biofabrication of 3D constructs: fabrication technologies and spider silk proteins as bioinks

Elise DeSimone et al.

PURE AND APPLIED CHEMISTRY (2015)

Add to Collection

Editorial Material Biochemistry & Molecular Biology

3D bioprinting: A new insight into the therapeutic strategy of neural tissue regeneration

Fu-Yu Hsieh et al.

ORGANOGENESIS (2015)

Add to Collection

Review Engineering, Biomedical

3D Printing of Scaffolds for Tissue Regeneration Applications

Anh-Vu Do et al.

ADVANCED HEALTHCARE MATERIALS (2015)

Add to Collection

Article Biotechnology & Applied Microbiology

3D Bioprinting of Carboxymethylated-Periodate Oxidized Nanocellulose Constructs for Wound Dressing Applications

Adam Rees et al.

BIOMED RESEARCH INTERNATIONAL (2015)

Add to Collection

Article Materials Science, Biomaterials

Three-dimensional fabrication of cell-laden biodegradable poly(ethylene glycol-co-depsipeptide) hydrogels by visible light stereolithographye

Laura Elomaa et al.

JOURNAL OF MATERIALS CHEMISTRY B (2015)

Add to Collection

Review Materials Science, Biomaterials

An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing

D. M. Kirchmajer et al.

JOURNAL OF MATERIALS CHEMISTRY B (2015)

Add to Collection

Review Biochemical Research Methods

Recent advances in 3D printing of biomaterials

Helena N. Chia et al.

JOURNAL OF BIOLOGICAL ENGINEERING (2015)

Add to Collection

Article Multidisciplinary Sciences

Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels

Thomas J. Hinton et al.

SCIENCE ADVANCES (2015)

Add to Collection

Article Cell & Tissue Engineering

An additive manufacturing-based PCL-alginate-chondrocyte bioprinted scaffold for cartilage tissue engineering

Joydip Kundu et al.

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2015)

Add to Collection

Article Multidisciplinary Sciences

Engineering an in vitro air-blood barrier by 3D bioprinting

Lenke Horvath et al.

SCIENTIFIC REPORTS (2015)

Add to Collection

Article Engineering, Biomedical

A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks

Zongjie Wang et al.

BIOFABRICATION (2015)

Add to Collection

Article Engineering, Biomedical

Bioprinting of human pluripotent stem cells and their directed differentiation into hepatocyte-like cells for the generation of mini-livers in 3D

Alan Faulkner-Jones et al.

BIOFABRICATION (2015)

Add to Collection

Review Pharmacology & Pharmacy

Critical analysis of 3-D organoid in vitro cell culture models for high-throughput drug candidate toxicity assessments

Anna Astashkina et al.

ADVANCED DRUG DELIVERY REVIEWS (2014)

Add to Collection

Article Engineering, Biomedical

3D printing of biomimetic microstructures for cancer cell migration

Tina Qing Huang et al.

BIOMEDICAL MICRODEVICES (2014)

Add to Collection

Article Biochemistry & Molecular Biology

A novel biomaterial: bacterial cellulose and its new era applications

Bhavna V. Mohite et al.

BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY (2014)

Add to Collection

Article Biochemical Research Methods

Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs

Luiz E. Bertassoni et al.

LAB ON A CHIP (2014)

Add to Collection

Review Biochemical Research Methods

Light-assisted direct-write of 3D functional biomaterials

Kolin C. Hribar et al.

LAB ON A CHIP (2014)

Add to Collection

Review Biotechnology & Applied Microbiology

3D bioprinting of tissues and organs

Sean V. Murphy et al.

NATURE BIOTECHNOLOGY (2014)

Add to Collection

Article Cell & Tissue Engineering

Design and Fabrication of Human Skin by Three-Dimensional Bioprinting

Vivian Lee et al.

TISSUE ENGINEERING PART C-METHODS (2014)

Add to Collection

Article Engineering, Biomedical

Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels

Luiz E. Bertassoni et al.

BIOFABRICATION (2014)

Add to Collection

Article Engineering, Biomedical

A comparative study on collagen type I and hyaluronic acid dependent cell behavior for osteochondral tissue bioprinting

Ju Young Park et al.

BIOFABRICATION (2014)

Add to Collection

Article Engineering, Biomedical

Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers

Riccardo Levato et al.

BIOFABRICATION (2014)

Add to Collection

Review Chemistry, Multidisciplinary

25th Anniversary Article: Engineering Hydrogels for Biofabrication

Jos Malda et al.

ADVANCED MATERIALS (2013)

Add to Collection

Article Chemistry, Applied

Synthesis and swelling behavior of xanthan-based hydrogels

Vania Blasques Bueno et al.

CARBOHYDRATE POLYMERS (2013)

Add to Collection

Article Engineering, Biomedical

3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels

Bin Duan et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)

Add to Collection

Article Biotechnology & Applied Microbiology

Cellular behavior in micropatterned hydrogels by bioprinting system depended on the cell types and cellular interaction

Soyoung Hong et al.

JOURNAL OF BIOSCIENCE AND BIOENGINEERING (2013)

Add to Collection

Article Gastroenterology & Hepatology

Three-Dimensional Print of a Liver for Preoperative Planning in Living Donor Liver Transplantation

Nizar N. Zein et al.

LIVER TRANSPLANTATION (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Bone tissue engineering using 3D printing

Susmita Bose et al.

MATERIALS TODAY (2013)

Add to Collection

Article Multidisciplinary Sciences

Sustained Release of BMP-2 in Bioprinted Alginate for Osteogenicity in Mice and Rats

Michelle T. Poldervaart et al.

PLOS ONE (2013)

Add to Collection

Article Engineering, Biomedical

Biofabrication of multi-material anatomically shaped tissue constructs

Jetze Visser et al.

BIOFABRICATION (2013)

Add to Collection

Article Engineering, Biomedical

Cancer cell migration within 3D layer-by-layer microfabricated photocrosslinked PEG scaffolds with tunable stiffness

Pranav Soman et al.

BIOMATERIALS (2012)

Add to Collection

Article Engineering, Biomedical

Directed endothelial cell morphogenesis in micropatterned gelatin methacrylate hydrogels

Mehdi Nikkhah et al.

BIOMATERIALS (2012)

Add to Collection

Article Engineering, Biomedical

Biocompatibility and biodegradation studies of PCL/β-TCP bone tissue scaffold fabricated by structural porogen method

Lin Lu et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2012)

Add to Collection

Review Multidisciplinary Sciences

Designing Cell-Compatible Hydrogels for Biomedical Applications

Dror Seliktar

SCIENCE (2012)

Add to Collection

Review Biotechnology & Applied Microbiology

Recent advances in bone tissue engineering scaffolds

Susmita Bose et al.

TRENDS IN BIOTECHNOLOGY (2012)

Add to Collection

Article Biochemistry & Molecular Biology

Hyaluronic Acid and Dextran-Based Semi-IPN Hydrogels as Biomaterials for Bioprinting

Laura Pescosolido et al.

BIOMACROMOLECULES (2011)

Add to Collection

Article Critical Care Medicine

Scaffolds for bone healing: Concepts, materials and evidence

P. Lichte et al.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2011)

Add to Collection

Article Engineering, Biomedical

Cell-laden microengineered gelatin methacrylate hydrogels

Jason W. Nichol et al.

BIOMATERIALS (2010)

Add to Collection

Article Engineering, Biomedical

Directed 3D cell alignment and elongation in microengineered hydrogels

Hug Aubin et al.

BIOMATERIALS (2010)

Add to Collection

Article Neurosciences

Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture

Yeong-Bae Lee et al.

EXPERIMENTAL NEUROLOGY (2010)

Add to Collection

Article Chemistry, Applied

Citric acid cross-linking of starch films

Narendra Reddy et al.

FOOD CHEMISTRY (2010)

Add to Collection

Article Engineering, Biomedical

Photoinitiated polymerization of PEG-diacrylate with lithium phenyl-2,4,6-trimethylbenzoylphosphinate: polymerization rate and cytocompatibility

Benjamin D. Fairbanks et al.

BIOMATERIALS (2009)

Add to Collection

Article Biophysics

Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs

Saif Khalil et al.

JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2009)

Add to Collection

Review Cell & Tissue Engineering

Cell encapsulation in biodegradable hydrogels for tissue engineering applications

Garret D. Nicodemus et al.

TISSUE ENGINEERING PART B-REVIEWS (2008)

Add to Collection

Review Cell & Tissue Engineering

Fibrin: A versatile scaffold for tissue engineering applications

Tamer A. E. Ahmed et al.

TISSUE ENGINEERING PART B-REVIEWS (2008)

Add to Collection

Article Engineering, Biomedical

Macroporous interconnected dextran scaffolds of controlled porosity for tissue-engineering applications

SG Lévesque et al.

BIOMATERIALS (2005)

Add to Collection

Article Biochemistry & Molecular Biology

Controlled degradation and mechanical behavior of photopolymerized hyaluronic acid networks

JA Burdick et al.

BIOMACROMOLECULES (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.