☆ 4.6 Article

Partial crystallization in a Zr-based bulk metallic glass in selective laser melting

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Review Automation & Control Systems

Research progress on selective laser melting (SLM) of bulk metallic glasses (BMGs): a review

Peilei Zhang et al.

Summary: Research efforts have been made to overcome the difficulties in manufacturing bulk metallic glasses (BMGs) in recent years. Additive manufacturing methods such as selective laser melting (SLM) have shown promise in overcoming the limitations of traditional fabrication methods, allowing for the production of complex structures with superior properties. This review discusses the current status, challenges, and prospects of using SLM technology to prepare BMGs, highlighting the need to address key issues in this field for future applications as both structural and functional materials.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Engineering, Manufacturing

Optimizing the Process Parameters for Additive Manufacturing of Glass Components by Selective Laser Melting: Soda-Lime Glass Versus Quartz Glass

S. N. Grigoriev et al.

Summary: Selective laser melting is applicable to glasses, but preheating is necessary to avoid cracking and residual porosity. Variation in preheating temperature can effectively control powder consolidation.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturing

D. Schimbaeck et al.

Summary: To fully exploit the potential of additive layer manufacturing, adapting materials to the process via smart alloy design is necessary. Different microstructural evolutions were studied in Sc-modified Al alloys with the addition of Mg, Cr, or Ti as main elements. The differences in microstructures arise from interactions of grain growth restriction factors and solute with the primary precipitation structure.

SCRIPTA MATERIALIA (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Recent development in the application of bulk metallic glasses

K. Gao et al.

Summary: This paper presents the commercial application of bulk metallic glasses (BMGs), including suitable alloys for actual products, the advantages of BMGs processing techniques over existing techniques and materials, and typical examples of products in recent years. The future directions of BMGs industrialization are also discussed.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Additive manufacturing of bulk metallic glass: Principles, materials and prospects

Wenzheng Wu et al.

Summary: This paper reviews the forming principles and characteristics of additive manufacturing of metallic glass, and summarizes and introduces different manufacturing technologies. Moreover, the future development of the field of additive manufacturing of metallic glass is discussed.

MATERIALS TODAY ADVANCES (2022)

Add to Collection

Article Automation & Control Systems

Powder bed surface relief formation and denudation in selective laser melting

Sergey Grigoriev et al.

Summary: Recent studies have highlighted the significance of powder transport by gas-phase flows in the laser-interaction zone in laser powder bed additive manufacturing. This phenomenon has important implications for the development and optimization of laser-assisted processes in additive manufacturing.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Gas tungsten arc welding of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy

Jiajia Shen et al.

Summary: This study investigated the gas tungsten arc welding of an as-cast AlCoCrFeNi2.1 alloy and analyzed the microstructural evolution and strength distribution of the welded joints. The results showed that the weld thermal cycle caused variations in the relative volume fractions of the FCC + B2 BCC eutectic structure across the joint. BCC nanoprecipitates in the base material dissolved into the matrix in the heat affected zone and closer to the fusion zone boundary. The fusion zone exhibited grain refinement and increased hardness compared to the as-cast base material. The joints demonstrated a good balance of strength and ductility with failure occurring in the base material. This study establishes the potential for using arc-based welding for joining eutectic high entropy alloys.

MATERIALS & DESIGN (2022)

Add to Collection

Article Engineering, Manufacturing

Predictive simulation of bulk metallic glass crystallization during laser powder bed fusion

Zerong Yang et al.

Summary: Laser powder bed fusion (L-PBF) technology is used to fabricate BMG parts. By coupling the Nakamura model with L-PBF process simulation, a method for determining crystallization parameters and a numerical implementation method have been developed. Numerical simulations and experimental validation provide a comprehensive understanding of BMG crystallization behavior during L-PBF.

ADDITIVE MANUFACTURING (2022)

Add to Collection

Review Materials Science, Ceramics

Unique properties and potential of glass-ceramics

Tsuyoshi Honma et al.

Summary: Glass-ceramics have been widely used in modern society and their research and development are ongoing. Mechanical properties, thermal shock resistance, optical transparency, and ionic conductivity are important issues in glass research and industry.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2022)

Add to Collection

Article Materials Science, Ceramics

Isothermal crystallization kinetics of an industrial-grade Zr-based bulk metallic glass

Zerong Yang et al.

Summary: This study systematically investigates the isothermal crystallization kinetics of an industrial-grade Zr-based BMG, revealing the mechanisms and modeling compatibility, while also determining the interfacial energies and studying the effects of crystallization fraction on Avrami index and activation energy.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Structural investigations of Fe-Zr-Si-Cu metallic glass with low glass-forming ability produced in laser powder bed fusion technology

Lukasz Szczepanski et al.

Summary: In recent years, Fe-based metallic glasses have been extensively researched for their favorable mechanical and magnetic properties. Breakthroughs have been made in producing these materials in Laser Powder Bed Fusion technology, allowing the production of elements of any shape. The microstructure of the manufactured parts plays a crucial role in determining their properties.

MATERIALS & DESIGN (2021)

Add to Collection

Review Physics, Condensed Matter

Crystalline defects in bulk metallic glasses: consequences on fracture toughness determination and ductility

C. Bernard et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2020)

Add to Collection

Article Mechanics

Entrainment flow of a jet emerging into a half-space with the no-slip boundary condition

A. Gusarov

PHYSICS OF FLUIDS (2020)

Add to Collection

Article Optics

Radiative transfer, absorption, and reflection by metal powder beds in laser powder-bed processing

A. V. Gusarov

JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER (2020)

Add to Collection

Review Engineering, Manufacturing

Crystallization in additive manufacturing of metallic glasses: A review

Haishun Liu et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of chemical composition on the fracture toughness of bulk metallic glasses

Ling Shao et al.

MATERIALIA (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Metallic Glasses: A New Approach to the Understanding of the Defect Structure and Physical Properties

Vitaly Khonik et al.

METALS (2019)

Add to Collection

Article Chemistry, Physical

3D printing of Zr-based bulk metallic glasses and components for potential biomedical applications

Cheng Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Multidisciplinary Sciences

Thermophysical properties of liquid Zr52.5Cu17.9Ni14.6Al10Ti5-prospects for bulk metallic glass manufacturing in space

M. Mohr et al.

NPJ MICROGRAVITY (2019)

Add to Collection

Article Engineering, Industrial

On productivity of laser additive manufacturing

Andrey V. Gusarov et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Nanocrystallization in Cu-Zr-Al-Sm Bulk Metallic Glasses

Fatih Sikan et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Kinetics, Thermodynamics, and Structure of Bulk Metallic Glass Forming Liquids

Ralf Busch et al.

JOM (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Bulk Metallic Glasses as Structural Materials: A Review

Jamie J. Kruzic

ADVANCED ENGINEERING MATERIALS (2016)

Add to Collection

Article Materials Science, Ceramics

Thermodynamics and kinetics of laser induced transformation in zirconium based bulk metallic glass

Hitesh D. Vora et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)

Add to Collection

Article Thermodynamics

Thermal Evaporation Loss Measurements on Quasicrystal (Ti-Zr-Ni) and Glass Forming (Vit 106 and Vit 106a) Liquids

M. E. Blodgett et al.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Model of thermal conductivity in powder beds

A. V. Gusarov et al.

PHYSICAL REVIEW B (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Formation, thermal stability and mechanical properties of Zr-Nb-Cu-Ni-Al bulk metallic glasses

Wenbo Dong et al.

MATERIALS TRANSACTIONS (2006)

Add to Collection

Article Nanoscience & Nanotechnology

On the crystalline equilibrium phases of the Zr57Cu15.4Ni12.6Al10Nb5 bulk metallic glass forming alloy

L Shadowspeaker et al.

SCRIPTA MATERIALIA (2004)

Add to Collection

Article Mechanics

Gas-dynamic boundary conditions of evaporation and condensation: Numerical analysis of the Knudsen layer

AV Gusarov et al.

PHYSICS OF FLUIDS (2002)

Add to Collection

Article Nanoscience & Nanotechnology

Nanocrystallization of bulk Zr-Cu-Ti metallic glass

AS Aronin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Formation and properties of Zr-(Ti, Nb)-Cu-Ni-Al bulk metallic glasses

WH Wang et al.

MATERIALS TRANSACTIONS (2001)

Add to Collection

Article Physics, Applied

Thermodynamics of Cu47Ti34Zr11Ni8, Zr52.5Cu17.9Ni14.6Al10Ti5 and Zr57Cu15.4Ni12.6Al10Nb5 bulk metallic glass forming alloys

SC Glade et al.

JOURNAL OF APPLIED PHYSICS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.