☆ 4.6 Review

Nanocarbon-Containing Polymer Composite Foams: A Review of Systems for Applications in Electromagnetic Interference Shielding, Energy Storage, and Piezoresistive Sensors

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2023)

Related references

Note: Only part of the references are listed.
Article Materials Science, Composites

Sustainable electromagnetic shielding graphene/nanocellulose thin films with excellent joule heating and mechanical properties via in-situ mechanical exfoliation and crosslinking with cations

Yi Yang et al.

Summary: A sustainable graphene/nanocellulose electromagnetic shielding composite film was fabricated by inducing graphite exfoliation with nanocellulose. The film's properties were enhanced by cation crosslinking, which improved electrical conductivity, electromagnetic shielding effectiveness, and mechanical strength. The presence of metal cations also enhanced electrical conductivity and electromagnetic shielding effectiveness through cation-pi interactions with graphene. The film cross-linked with Cu2+ cations exhibited a tensile strength of 64.3 MPa, elongation at break of 17.1%, electromagnetic shielding effectiveness of 30.7 dB, and a conductivity of 3172 S/m at 40 μm thickness.

COMPOSITES SCIENCE AND TECHNOLOGY (2023)

Add to Collection
Article Engineering, Manufacturing

Construction of unique conductive networks in carbon nanotubes/polymer composites via poly(?-caprolactone) inducing partial aggregation of carbon nanotubes for microwave shielding enhancement

Jun-Ru Tao et al.

Summary: In this study, a unique conductive network consisting of individual carbon nanotubes (CNT) and CNT clusters induced by poly(epsilon-caprolactone) (PCL) is constructed in CNTs filled CPCs. The effect of different polymer matrices (isotactic polypropylene, polystyrene, and polylactic acid) on the conductive network is evaluated, and the electrical conductivity and microwave shielding properties are compared. The study also discusses the influence of CNTs and PCL loadings on the formation of CNT clusters. The results show that the CNT/CNT-cluster conductive network formed in CNT/PCL/PLA composites exhibits excellent performance in improving electrical conductivity and microwave shielding.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2023)

Add to Collection
Article Chemistry, Physical

Facile Fabrication of PBS/CNTs Nanocomposite Foam for Electromagnetic Interference Shielding

Jingyun Luo et al.

Summary: In this paper, a biodegradable nanocomposite foam with outstanding electromagnetic interference shielding was fabricated by blending poly (butylene succinate) (PBS) with carbon nanotubes (CNTs) followed by foaming with supercritical CO2. The addition of CNTs significantly improved the crystallization temperature and melting temperature of PBS nanocomposites, as well as enhanced the electrical properties. The CNTs also endowed the PBS foam with adjustable electromagnetic interference (EMI) shielding property.

CHEMPHYSCHEM (2022)

Add to Collection
Review Engineering, Chemical

Recent Advances in Graphene-Based Polymer Nanocomposites and Foams for Electromagnetic Interference Shielding Applications

Mahyar Panahi-Sarmad et al.

Summary: This paper discusses the alarming issue of electromagnetic interference (EMI) and recommends the use of polymer nanocomposites and foams, particularly those incorporating graphene and its hybrid derivatives, as effective solutions. The advantages and challenges of these materials are thoroughly evaluated, and their role in improving EMI performance is emphasized. The article also presents the operating principles of shielding mechanisms behind EMI technology and explores opportunities for further development.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Add to Collection
Review Engineering, Chemical

Electromagnetic interference cognizance and potential of advanced polymer composites toward electromagnetic interference shielding: A review

Nishu Devi et al.

Summary: The exigency of electromagnetic shielding arises from widespread electronic device use, requiring advanced materials and techniques to limit electromagnetic wave transmission. This study investigates the use of polymer-based composites for EMI shielding and discusses the societal and environmental impacts of electromagnetic waves.

POLYMER ENGINEERING AND SCIENCE (2022)

Add to Collection
Article Chemistry, Analytical

An effective ratiometric electrochemical sensor for highly selective and reproducible detection of ochratoxin A: Use of magnetic field improved molecularly imprinted polymer

Xiaopeng Hu et al.

Summary: A ratiometric electrochemical sensor based on molecularly imprinted polymer (RECS-MIP) has been developed for the detection of Ochratoxin A (OTA). The sensor, using Au NPs/PIL-FMNS/CNT-MoS2 as a substrate, displays high selectivity and reproducibility, indicating great potential for application.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Add to Collection
Article Materials Science, Composites

Ultrasensitive and wide-range reduced graphene oxide/natural rubber foam sensors for multifunctional self-powered wireless wearable applications

Yanjing Zhang et al.

Summary: Flexible wearable electronics is a promising field with wide applications. In this study, an all-in-one sensor with high sensitivity, wide detection range and excellent durability was developed using reduced graphene oxide and porous natural rubber. Additionally, a smart insole for gait analysis and disease diagnosis was fabricated. The study also demonstrated the ability of the sensor to harvest mechanical energy, providing a new approach for the development of wireless self-powered wearable systems.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection
Article Materials Science, Composites

Sandwich structured iPP/CNTs nanocomposite foams with high electromagnetic interference shielding performance

Long Fu et al.

Summary: Polymer-based nanocomposite foams with a sandwich structure consisting of a micro-foamed core layer and nano-foamed skin layers were prepared using iPP and CNTs. The foam exhibited a strong EMI shielding performance attributed to the absorption mechanism.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection
Article Chemistry, Physical

Nanoarchitectonics of highly sensitive and with large working range 3D piezoresistive microporous foam based on carbon nanotubes and elastomer

Antonio Turco et al.

Summary: A novel nanoarchitectonics strategy was developed to prepare an elastomeric/carbon nanotubes (CNTs) 3D porous piezoresistive nanocomposite with excellent properties. The material exhibited well dispersed pristine CNTs on both surface and bulk, along with improved piezoresistive properties and high sensitivity at low displacement. The nanocomposite could be used in various applications with outstanding flexibility.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Improving dispersion and delamination of graphite in biodegradable starch materials via constructing cation-π interaction: Towards microwave shielding enhancement

Yi Yang et al.

Summary: In this study, a low-cost, biodegradable, and high-performance microwave shielding material was fabricated by constructing a cation-pi interaction between ammonium ions and graphite. The materials were prepared through coating and compression methods, which improved the dispersion and orientation of the graphite. This resulted in enhanced electrical conductivity and electromagnetic shielding effectiveness of the materials.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection
Review Materials Science, Multidisciplinary

Sustainability and Life Cycle Assessment of Thermoplastic Polymers for Packaging: A Review on Fundamental Principles and Applications

Ritima Banerjee et al.

Summary: This article presents recent developments in the use of life cycle assessment (LCA) for evaluating the sustainability of thermoplastics, including comparisons with other packaging materials. LCA is vital for selecting the material, process, and waste management technique best suited for sustainability without compromising the product quality.

MACROMOLECULAR MATERIALS AND ENGINEERING (2022)

Add to Collection
Article Polymer Science

Migration mechanism of carbon nanotubes and matching viscosity-dependent morphology in Co-continuous Poly(lactic acid)/Poly (e-caprolactone) blend: Towards electromagnetic shielding enhancement

Jun-Ru Tao et al.

Summary: The migration behavior of carbon nanotubes and the mixing rates significantly affect the morphology and electromagnetic waves shielding performance of conductive polymer composites. Improved viscosity matching results in smaller phases size and enhanced microwave attenuation due to more interfaces.

POLYMER (2022)

Add to Collection
Article Chemistry, Physical

A resilient and lightweight cellulose/graphene oxide/polymer-derived multifunctional carbon aerogel generated from Pickering emulsion toward a wearable pressure sensor

Daogui Liao et al.

Summary: In this study, a robust strategy was demonstrated to fabricate compressible and multifunctional carbon aerogels utilizing freeze-drying of cellulose nanofibers and graphene oxide co-stabilized Pickering emulsion gel, followed by high-temperature annealing. The resulting carbon aerogel exhibited tunable mechanical, hydrophilic, and hydrophobic properties, and showed great potential for various applications such as sensors, thermal insulation, and photothermal conversion.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection
Article Mechanics

Effect interfacial size and multiple interface on electromagnetic shielding of silicon rubber/carbon nanotube composites with mixing segregated particles

Dian Yang et al.

Summary: This study explores the effect of size and size distribution of segregated particles on the electromagnetic shielding performance of PDMS/CNT composites. It is found that decreasing the size of segregated particles increases the interfaces, leading to improved EMI shielding effectiveness. Additionally, mixing SiO2 particles with different diameters creates composites with multiple interfaces, further enhancing interfacial polarization and EMI shielding performance.

COMPOSITE STRUCTURES (2022)

Add to Collection
Article Polymer Science

Preparation of Novel Graphene/Silicone Rubber Nanocomposite Dielectric Foams

Fei Jia et al.

Summary: High dielectric silicone rubber-based nanocomposites were prepared by adding graphene through ultrasonication and mechanical mixing, resulting in materials with improved properties. The cellular structure and dielectric properties were greatly influenced by the content of graphene and the expansion rate.

POLYMERS (2022)

Add to Collection
Article Materials Science, Composites

Effect of surface conductivity on electromagnetic shielding of multi-walled carbon nanotubes/Poly(ε-caprolactone) composites

Jun-Ru Tao et al.

Summary: This study discusses the effect of surface conductivity on the microwave shielding effectiveness of sandwiched MWCNT/PCL composites. It is found that decreasing surface conductivity leads to a decrease in electromagnetic shielding. Simulation and experimental studies indicate that microwave reflection plays a vital role in the shielding performance. Furthermore, the dielectric properties of the surface layers have little effect on the shielding effectiveness.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection
Article Chemistry, Physical

Highly sensitive large strain cellulose/multiwalled carbon nanotubes (MWCNTs)/thermoplastic polyurethane (TPU) nanocomposite foams: From design to performance evaluation

Yanpei Fei et al.

Summary: In this study, thermoplastic polyurethane was synthesized on the aerogel skeleton to obtain cellulose/multiwalled carbon nanotubes/thermoplastic polyurethane nanocomposite foams. These foams showed lightweight, high strength, and high sensitivity properties, with good repeatability of force-to-electricity conversion behavior under 50% strain.

JOURNAL OF SUPERCRITICAL FLUIDS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Supercritical carbon dioxide foaming for ultra-low dielectric loss perfluorinated foam

Xutao Zhang et al.

Summary: This article introduces a method for preparing ultra-low dielectric perfluorinated foam through supercritical CO2 foaming. The foam has the lowest dielectric loss and excellent performance, making it suitable for high-frequency and high-speed signal transmission substrates.

JOURNAL OF CO2 UTILIZATION (2022)

Add to Collection
Article Engineering, Manufacturing

Poly (vinylidene fluoride)-based microcellular dielectrics filled with polydopamine coated carbon nanotubes for achieving high permittivity and ultralow dielectric loss

Jiaming Zhu et al.

Summary: The study showed that PDA@CNT/PVDF composites achieved desirable dielectric properties under supercritical CO2 foaming conditions, with significantly reduced dielectric permittivity and loss factor; increasing the expansion ratio helped reduce the polarizability within particle/polymer interfaces and promote the disaggregation of conductive particles; more nucleation points and space restrictions led to the formation of more cells, with mild growth in cell size, facilitating the reduction of inter-particle spacing and disentanglement.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection
Article Chemistry, Physical

Rheology and foaming behaviour of styrene-ethylene-butylene-styrene nanocomposites

Ritima Banerjee et al.

Summary: The study investigates the foaming behavior and properties of nanocomposite foams, finding that the nanocomposite structure plays a crucial role in producing thermoplastic elastomer foams with superior morphology and low shrinkage.

COLLOID AND POLYMER SCIENCE (2021)

Add to Collection
Article Chemistry, Physical

Ultralight carbon nanotube/graphene/polyimide foam with heterogeneous interfaces for efficient electromagnetic interference shielding and electromagnetic wave absorption

Yue-Yi Wang et al.

Summary: A lightweight polyimide foam with excellent EMI shielding performance and good compression stability was successfully designed by achieving ideal CNT dispersion through the interaction between functionalized graphene and CNT, providing a new approach for the aerospace industry.

CARBON (2021)

Add to Collection
Review Chemistry, Physical

Review on the electromagnetic interference shielding properties of carbon based materials and their novel composites: Recent progress, challenges and prospects

Nannan Wu et al.

Summary: The rapid development of electronic devices has raised concerns about electromagnetic radiation issues, and the most effective way to address electromagnetic pollution is to fabricate electromagnetic interference shielding materials and microwave absorption materials with lightweight and strong attenuation abilities. Carbon nanocomposites have attracted attention in the field of electromagnetic interference shielding due to their low density, natural abundance, easy preparation, excellent conductivity, and flexibility. Recent advancements in carbon materials as ESMs/MAMs have shown that 3D carbon materials and novel composites have the potential to enhance electromagnetic interference shielding efficiency.

CARBON (2021)

Add to Collection
Article Engineering, Environmental

Flexible, self-powered and multi-functional strain sensors comprising a hybrid of carbon nanocoils and conducting polymers

Shihong Xu et al.

Summary: The development of a self-powered strain-temperature dual-functional sensor based on carbon nanocoils and conductive elastomeric blends shows potential for broad strain detection range, high sensitivity, and practical application in monitoring human activities and temperature changes on the skin.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Article Engineering, Manufacturing

Temperature and strain-induced tunable electromagnetic interference shielding in polydimethylsiloxane/multi-walled carbon nanotube composites with temperature-sensitive microspheres

Jie-Hua Cai et al.

Summary: Elastomer composites with temperature and strain-induced tunable EMI shielding effectiveness were successfully obtained by introducing temperature-sensitive microspheres (TSM) into PDMS/CNT mixture. The mechanism of temperature and strain-induced regulation on EMI shielding was investigated, showing that TSM particles could rearrange the CNT conductive network at specific temperature and strain levels. Temperature-induced regulation led to a decrease in EMI SE at 120°C, partially recovering at 150°C, while strain-induced regulation resulted in reduced EMI SE after 70% compression, partially recovering at 120°C.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection
Review Engineering, Chemical

An overview of the recent advances in polylactide-based sustainable nanocomposites

Ritima Banerjee et al.

Summary: This review article summarizes recent advances in polylactide (PLA) nanocomposites, highlighting the impact of various types of nanoparticles on their properties. The review provides a comprehensive overview of PLA fundamentals and critical aspects of processing, characterization, and applications, offering new insights for the design and formulation of advanced sustainable PLA nanocomposites suitable for a wide range of applications.

POLYMER ENGINEERING AND SCIENCE (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Electromagnetic Interference Shielding Foams Based on Poly(vinylidene fluoride)/Carbon Nanotubes Composite

Dongxing Dun et al.

Summary: Polymeric electromagnetic interference (EMI) shielding foaming materials consisting of PVDF and CNTs are prepared in this study, with adjustable electrical conductivity and excellent EMI specific shielding effectiveness. The inclusion of CNTs enhances the performance of the composite system, and the foaming process provides a green and efficient route for the preparation of these materials.

MACROMOLECULAR MATERIALS AND ENGINEERING (2021)

Add to Collection
Article Chemistry, Physical

Microwave absorption study of composites based on CQD@BaTiO3 core shell and BaFe12O19 nanoparticles

Shivanshu Goel et al.

Summary: A novel microwave absorbing composite medium for X-band has been developed by mixing carbon quantum dots coated barium titanate fibers with barium hexaferrite nanoparticles, resulting in improved reflection loss of -25.38 dB. This composite showed enhanced absorption performance with a maximum -10dB bandwidth of 2.7 GHz.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection
Article Chemistry, Physical

In situ polymerized polyaniline/MXene (V2C) as building blocks of supercapacitor and ammonia sensor self-powered by electromagnetic-triboelectric hybrid generator

Xingwei Wang et al.

Summary: This study demonstrates the in situ polymerization of PANI/MXene composites for supercapacitor and ammonia sensor applications, powered by an electromagnetic-triboelectric hybrid generator. The PANI/MXene materials show high performance in terms of capacitance, energy density, and sensor response, making them promising candidates for self-powered gas sensing in industrial and agricultural settings.

NANO ENERGY (2021)

Add to Collection
Article Materials Science, Composites

Robust electromagnetic interference shielding, joule heating, thermal conductivity, and anti-dripping performances of polyoxymethylene with uniform distribution and high content of carbon-based nanofillers

Jie Li et al.

Summary: A new strategy was introduced to fabricate PMCNT and PMGNP composites with high contents of MWCNT and GNP by assisting of miscible PLLA, showing robust EMI shielding effectiveness, Joule heating, thermal conductivity, and anti-dripping performance. The composites exhibited high electrical and through plane thermal conductivities, along with excellent Joule heating performance and solvent resistance, making them potentially applicable in extreme environments.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection
Review Chemistry, Physical

Fabrication, mechanisms and perspectives of conductive polymer composites with multiple interfaces for electromagnetic interference shielding: A review

Ming Wang et al.

Summary: This paper discusses the importance of EMI shielding materials in modern society, the drawbacks of metal-based materials, and the advantages of conductive polymer composites. The focus is on how CPC with multiple interfaces can enhance EMI shielding effectiveness.

CARBON (2021)

Add to Collection
Article Engineering, Environmental

In-situ metallized carbon nanotubes/poly(styrene-butadiene-styrene) (CNTs/SBS) foam for electromagnetic interference shielding

Dingkun Tian et al.

Summary: The study presents a lightweight and highly compressible conductive composite foam with excellent mechanical, electrical, and EMI shielding performance. The foam, composed of SBS polymer matrix, CNTs, and Ag NPs, shows promising potential as lightweight, flexible, and high-performance EMI shielding materials for modern electronic devices.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Review Engineering, Electrical & Electronic

Recent advances in electromagnetic interference shielding properties of carbon-fibre-reinforced polymer composites-a topical review

E. Mikinka et al.

Summary: This state-of-the-art review summarises recent research advancements in the field of electromagnetic shielding properties of CFRP composites, focusing on experimental work and important parameters affecting performance. It emphasizes the strong link between processing conditions and the shielding properties of the composite.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Add to Collection
Review Polymer Science

Graphene and Iron Reinforced Polymer Composite Electromagnetic Shielding Applications: A Review

Saba Ayub et al.

Summary: With advancements in the automated industry, electromagnetic interference (EMI) has become a growing concern, impacting electronic appliances and end-users. Polymer-based composites have shown remarkable results in dealing with EMI, especially within the X-band frequency range. Further research is needed to explore new combinations for higher frequency ranges.

POLYMERS (2021)

Add to Collection
Review Nanoscience & Nanotechnology

Core-Shell Nanomaterials for Microwave Absorption and Electromagnetic Interference Shielding: A Review

Yudhajit Bhattacharjee et al.

Summary: Core-shell nanoparticles are a unique class of nanostructured materials that have been widely studied for their applications in electromagnetic interference shielding and microwave absorption. Electromagnetic interference, as a form of electronic pollution, can have significant impacts on electronic devices, making it crucial to protect them from such interference.

ACS APPLIED NANO MATERIALS (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Nanocellular poly(ether-block-amide)/MWCNT nanocomposite films fabricated by stretching-assisted microcellular foaming for high-performance EMI shielding applications

Guilong Wang et al.

Summary: A facile method is developed to prepare flexible and lightweight porous PEBA/MWCNT nanocomposite films with significantly enhanced EMI shielding performance, utilizing a novel foaming technology. The nanocellular PEBA/MWCNT nanocomposite films show exceptional absorption-dominated EMI shielding behavior and promise as an alternative to traditional EMI shielding materials.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection
Review Chemistry, Physical

Advances in electromagnetic shielding properties of composite foams

Biao Zhao et al.

Summary: In recent years, the issue of electromagnetic interference (EMI) radiation has become increasingly prominent, leading to the need for high efficiency materials to suppress EMI pollution. Traditional metallic shielding has limitations, while conductive polymer composites (CPCs) have attracted attention for their superior properties. Research on inorganic-based and polymer composite foams as EMI shielding materials will likely be the focus for future development.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection
Article Engineering, Electrical & Electronic

Evaluation of porous polydimethylsiloxane/carbon nanotubes (PDMS/CNTs) nanocomposites as piezoresistive sensor materials

Taissa R. Michel et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2020)

Add to Collection
Review Materials Science, Multidisciplinary

Recent progress on flexible and stretchable piezoresistive strain sensors: From design to application

Lingyan Duan et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Lightweight and Robust Carbon Nanotube/Polyimide Foam for Efficient and Heat-Resistant Electromagnetic Interference Shielding and Microwave Absorption

Yue-Yi Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Multifunctional Aramid Nanofiber/Carbon Nanotube Hybrid Aerogel Films

Peiying Hu et al.

ACS NANO (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Ultralight, Flexible, and Biomimetic Nanocellulose/Silver Nanowire Aerogels for Electromagnetic Interference Shielding

Zhihui Zeng et al.

ACS NANO (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Electromagnetic Shielding of Monolayer MXene Assemblies

Taeyeong Yun et al.

ADVANCED MATERIALS (2020)

Add to Collection
Article Engineering, Manufacturing

3D graphene/carbon nanotubes/polydimethylsiloxane composites as high-performance electromagnetic shielding material in X-band

Hui Jia et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection
Article Engineering, Manufacturing

Electrically electromagnetic interference shielding microcellular composite foams with 3D hierarchical graphene-carbon nanotube hybrids

Hongming Zhang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection
Review Chemistry, Multidisciplinary

2D MXenes for Electromagnetic Shielding: A Review

Aamir Iqbal et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Development of RGO/BaFe12O19-based composite medium for improved microwave absorption applications

Shivanshu Goel et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2020)

Add to Collection
Article Materials Science, Composites

Ultra-lightweight, super thermal-insulation and strong PP/CNT microcellular foams

Jinchuan Zhao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Effect of neodymium doping on microwave absorption property of barium hexaferrite in X-band

Shivanshu Goel et al.

MATERIALS RESEARCH EXPRESS (2020)

Add to Collection
Article Chemistry, Physical

Constructing nanopores in poly(oxymethylene)/multi-wall carbon nanotube nanocomposites via poly(L-lactide) assisting for improving electromagnetic interference shielding

Jie Li et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Add to Collection
Article Engineering, Environmental

Multifunctional polydimethylsiloxane foam with multi-walled carbon nanotube and thermo-expandable microsphere for temperature sensing, microwave shielding and piezoresistive sensor

Jie-Hua Cai et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection
Review Materials Science, Multidisciplinary

Foamability and Special Applications of Microcellular Thermoplastic Polymers: A Review on Recent Advances and Future Direction

Ritima Banerjee et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2020)

Add to Collection
Article Engineering, Manufacturing

Facile preparation of lightweight PE/PVDF/Fe3O4/CNTs nanocomposite foams with high conductivity for efficient electromagnetic interference shielding

Yishen Zhao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection
Article Biochemistry & Molecular Biology

Fabrication of biodegradable poly (lactic acid)/carbon nanotube nanocomposite foams: Significant improvement on rheological property and foamability

Yang Li et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection
Article Materials Science, Composites

Graphene-containing flexible polyurethane porous composites with improved electromagnetic shielding and flame retardancy

Yuanyuan Yao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Materials for electromagnetic interference shielding

D. D. L. Chung

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection
Review Engineering, Electrical & Electronic

A Comprehensive Review on Carbon-Based Polymer Nanocomposite Foams as Electromagnetic Interference Shields and Piezoresistive Sensors

Mahyar Panahi-Sarmad et al.

ACS APPLIED ELECTRONIC MATERIALS (2020)

Add to Collection
Article Engineering, Manufacturing

Exploiting the piezoresistivity and EMI shielding of polyetherimide/carbon nanotube foams by tailoring their porous morphology and segregated CNT networks

Dong Feng et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Piezoresistive Carbon Foams in Sensing Applications

Krisztian Kordas et al.

FRONTIERS IN MATERIALS (2019)

Add to Collection
Article Engineering, Manufacturing

Study on foamability and electromagnetic interference shielding effectiveness of supercritical CO2 foaming epoxy/rubber/MWCNTs composite

Xun Fan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection
Article Engineering, Multidisciplinary

Multi-layered stack consisting of PVDF nanocomposites with flow-induced oriented MWCNT structure can supress electromagnetic radiation

Amanuel Gebrekrstos et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Ultralightweight and 3D Squeezable Graphene-Polydimethylsiloxane Composite Foams as Piezoresistive Sensors

Debarun Sengupta et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Chemistry, Physical

Bio-molecule adenine building block effectively enhances electromagnetic interference shielding performance of polyimide-derived carbon foam

Chengfeng Li et al.

CARBON (2019)

Add to Collection
Article Engineering, Chemical

Porous CNT/rubber composite for resistive pressure sensor

Fu-Ren Hsiao et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2019)

Add to Collection
Article Polymer Science

Extensional Flow Resistance of 3D Fiber Networks in Plasticized Nanocomposites

Ali Rizvi et al.

MACROMOLECULES (2019)

Add to Collection
Article Chemistry, Physical

A versatile foaming platform to fabricate polymer/carbon composites with high dielectric permittivity and ultra-low dielectric loss

Biao Zhao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection
Review Engineering, Multidisciplinary

A review on recent advancement of electromagnetic interference shielding novel metallic materials and processes

Dimuthu Wanasinghe et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection
Article Chemistry, Physical

A simple strategy for flexible electromagnetic interference shielding: Hybrid rGO@CB-Reinforced polydimethylsiloxane

J. B. Anooja et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Development of a Highly Sensitive, Broad-Range Hierarchically Structured Reduced Graphene Oxide/PoIyHIPE Foam for Pressure Sensing

Lei Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Review Nanoscience & Nanotechnology

Carbon-based polymer nanocomposites as dielectric energy storage materials

Mohammed H. Al-Saleh

NANOTECHNOLOGY (2019)

Add to Collection
Review Polymer Science

Nanocomposite polymeric materials with 3D graphene-based architectures: from design strategies to tailored properties and potential applications

M. Salzano de Luna et al.

PROGRESS IN POLYMER SCIENCE (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Enhancing the EMI shielding of natural rubber-based supercritical CO2 foams by exploiting their porous morphology and CNT segregated networks

Yanhu Zhan et al.

NANOSCALE (2019)

Add to Collection
Article Chemistry, Multidisciplinary

High piezo-resistive performances of anisotropic composites realized by embedding rGO-based chitosan aerogels into open cell polyurethane foams

Tianliang Zhai et al.

NANOSCALE (2019)

Add to Collection
Article Chemistry, Physical

Nanostructure of Aerogels and Their Applications in Thermal Energy Insulation

Mina Noroozi et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Ultralight Microcellular Polymer-Graphene Nanoplatelet Foams with Enhanced Dielectric Performance

Mandi Hamidinejad et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection
Article Chemistry, Physical

Electromagnetic interference shielding effectiveness of microcellular polyimide/in situ thermally reduced graphene oxide/carbon nanotubes nanocomposites

Hongli Yang et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection
Article Chemistry, Physical

Extensional flow-induced hybrid crystalline fibrils (shish) in CNT/PLA nanocomposite

Chunhai Li et al.

CARBON (2018)

Add to Collection
Article Chemistry, Physical

Lightweight, flexible and strong core-shell non-woven fabrics covered by reduced graphene oxide for high-performance electromagnetic interference shielding

Ye Yuan et al.

CARBON (2018)

Add to Collection
Article Materials Science, Composites

Effect of cell morphology on electrical properties and electromagnetic interference shielding of graphene-poly(methyl methacrylate) microcellular foams

Seyed Esmaeil Zakiyan et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection
Article Engineering, Electrical & Electronic

Fabrication, Structure Characterization, and Performance Testing of Piezoelectret-Film Sensors for Recording Body Motion

Peng Fang et al.

IEEE SENSORS JOURNAL (2018)

Add to Collection
Article Polymer Science

Preparation of high-k composites with low dielectric loss based on the double-layer coaxial structure of inorganic/polymer

Yuhui Zhao et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

Add to Collection
Review Engineering, Electrical & Electronic

Theory, technology and applications of piezoresistive sensors: A review

A. S. Fiorillo et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Add to Collection
Article Chemistry, Analytical

Conjugated schiff base polymer foam/macroporous carbon integrated electrode for electrochemical sensing

Linyu Wang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Add to Collection
Article Materials Science, Multidisciplinary

Injection-molded microcellular PLA/graphite nanocomposites with dramatically enhanced mechanical and electrical properties for ultra-efficient EMI shielding applications

Guilong Wang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection
Review Materials Science, Multidisciplinary

Graphene nanohybrids: excellent electromagnetic properties for the absorbing and shielding of electromagnetic waves

Maosheng Cao et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection
Article Engineering, Electrical & Electronic

Polymeric Foams as the Matrix of Voltammetric Sensors for th Detection of Catechol, Hydroquinone, and Their Mixtures

C. Fernandez-Blanco et al.

JOURNAL OF SENSORS (2018)

Add to Collection
Article Nanoscience & Nanotechnology

Enhanced Electrical and Electromagnetic Interference Shielding Properties of Polymer-Graphene Nanoplatelet Composites Fabricated via Supercritical-Fluid Treatment and Physical Foaming

Mandi Hamidinejad et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection
Article Engineering, Environmental

Synergistic effect of carbon nanotube and graphene nanoplates on the mechanical, electrical and electromagnetic interference shielding properties of polymer composites and polymer composite foams

Hongming Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection
Review Engineering, Manufacturing

Recent advances in electromagnetic interference shielding properties of metal and carbon filler reinforced flexible polymer composites: A review

Sowmya Sankaran et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Add to Collection
Article Chemistry, Analytical

Sensory Polymeric Foams as a Tool for Improving Sensing Performance of Sensory Polymers

Blanca S. Pascual et al.

SENSORS (2018)

Add to Collection
Article Chemistry, Physical

A porous graphene/polydimethylsiloxane composite by chemical foaming for simultaneous tensile and compressive strain sensing

Yu Long et al.

FLATCHEM (2018)

Add to Collection
Article Nanoscience & Nanotechnology

Ultralow-Threshold and Lightweight Biodegradable Porous PLA/MWCNT with Segregated Conductive Networks for High-Performance Thermal Insulation and Electromagnetic Interference Shielding Applications

Guilong Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection
Article Materials Science, Multidisciplinary

Preparation, microstructure, and piezoresistive behavior of conductive nanocomposite foams based on poly(1-butene) and carbon black

Qianqian Suo et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2017)

Add to Collection
Article Chemistry, Applied

Dynamic rheology and foaming behaviour of styrene-ethylene-butylene-styrene/ polystyrene blends

Ritima Banerjee et al.

JOURNAL OF CELLULAR PLASTICS (2017)

Add to Collection
Article Chemistry, Physical

Carbon Nanotube/Graphene Nanoribbon/Polyvinylidene Fluoride Hybrid Nanocomposites: Rheological and Dielectric Properties

Mohammad Arjmand et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection
Article Nanoscience & Nanotechnology

Synergistic interactions between silver decorated graphene and carbon nanotubes yield flexible composites to attenuate electromagnetic radiation

Shital Patangrao Pawar et al.

NANOTECHNOLOGY (2017)

Add to Collection
Article Engineering, Electrical & Electronic

Hybrid Foam Pressure Sensor Utilizing Piezoresistive and Capacitive Sensing Mechanisms

Jarkko Tolvanen et al.

IEEE SENSORS JOURNAL (2017)

Add to Collection
Article Engineering, Chemical

Investigations on Blending and Foaming Behavior of Styrene-Ethylene-Butylene-Styrene/Polystyrene Blends

R. Banerjee et al.

INTERNATIONAL POLYMER PROCESSING (2017)

Add to Collection
Article Engineering, Electrical & Electronic

Multi-walled carbon nanotubes/silicone conductive foams and their piezoresistive behaviors

Chen Guo et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2017)

Add to Collection
Article Physics, Condensed Matter

Theory of electrical conductivity and dielectric permittivity of highly aligned graphene-based nanocomposites

Xiaodong Xia et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2017)

Add to Collection
Article Materials Science, Multidisciplinary

Graphene oxide reinforced poly (4-styrenesulfonic acid)/polyvinyl alcohol blend composites with enhanced dielectric properties for portable and flexible electronics

Kalim Deshmukh et al.

MATERIALS CHEMISTRY AND PHYSICS (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Modelling of thermal transport through a nanocellular polymer foam: toward the generation of a new superinsulating material

Guilong Wang et al.

NANOSCALE (2017)

Add to Collection
Article Materials Science, Multidisciplinary

Electromagnetic wave absorption properties of a carbon nanotube modified by a tetrapyridinoporphyrazine interface layer

Luo Kong et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection
Article Chemistry, Physical

A frequency-dependent theory of electrical conductivity and dielectric permittivity for graphene-polymer nanocomposites

Xiaodong Xia et al.

CARBON (2017)

Add to Collection
Article Engineering, Manufacturing

One-pot preparation of porous piezoresistive sensor with high strain sensitivity via emulsion-templated polymerization

Lei Yang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Add to Collection
Article Materials Science, Composites

Conductive herringbone structure carbon nanotube/thermoplastic polyurethane porous foam tuned by epoxy for high performance flexible piezoresistive sensor

Xiangdong Wei et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Add to Collection
Article Engineering, Manufacturing

Lightweight, multifunctional microcellular PMMA/Fe3O4@MWCNTs nanocomposite foams with efficient electromagnetic interference shielding

Hongming Zhang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Carbon Nanotube-Multilayered Graphene Edge Plane Core-Shell Hybrid Foams for Ultrahigh-Performance Electromagnetic-Interference Shielding

Qiang Song et al.

ADVANCED MATERIALS (2017)

Add to Collection
Article Engineering, Multidisciplinary

Improving the mechanical, thermal, dielectric and flame retardancy properties of cyanate ester with the encapsulated epoxy resin-penetrated aligned carbon nanotube bundle

Qingbao Guan et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection
Article Engineering, Multidisciplinary

Graphene nanoplatelets/carbon nanotubes/polyurethane composites as efficient shield against electromagnetic polluting radiations

Meenakshi Verma et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection
Article Chemistry, Physical

Constructing a continuous amorphous carbon interlayer to enhance dielectric performance of carbon nanotubes/polyvinylidene fluoride nanocomposites

Minhao Yang et al.

CARBON (2017)

Add to Collection
Article Engineering, Manufacturing

Process-microstructure-electrical conductivity relationships in injection-molded polypropylene/carbon nanotube nanocomposite foams

A. Ameli et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Add to Collection
Article Nanoscience & Nanotechnology

Ultralight Graphene Foam/Conductive Polymer Composites for Exceptional Electromagnetic Interference Shielding

Ying Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection
Article Engineering, Multidisciplinary

Excellent dielectric properties of poly(vinylidene fluoride) composites based on partially reduced graphene oxide

Xian-ling Xu et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Lightweight and Anisotropic Porous MWCNT/WPU Composites for Ultrahigh Performance Electromagnetic Interference Shielding

Zhihui Zeng et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection
Article Nanoscience & Nanotechnology

Highly Stretchable and Sensitive Strain Sensor Based on Facilely Prepared Three-Dimensional Graphene Foam Composite

Jinhui Li et al.

ACS Applied Materials & Interfaces (2016)

Add to Collection
Article Nanoscience & Nanotechnology

Biomass-Derived Thermally Annealed Interconnected Sulfur-Doped Graphene as a Shield against Electromagnetic Interference

Faisal Shahzad et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection
Article Nanoscience & Nanotechnology

Compressible Graphene-Coated Polymer Foams with Ultralow Density for Adjustable Electromagnetic Interference (EMI) Shielding

Bin Shen et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection
Review Chemistry, Multidisciplinary

Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review

Morteza Amjadi et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection
Article Physics, Applied

Piezoresistive behavior of porous carbon nanotube-thermoplastic polyurethane conductive nanocomposites with ultrahigh compressibility

Hu Liu et al.

APPLIED PHYSICS LETTERS (2016)

Add to Collection
Article Chemistry, Physical

Facile preparation of lightweight high-strength biodegradable polymer/multi-walled carbon nanotubes nanocomposite foams for electromagnetic interference shielding

Tairong Kuang et al.

CARBON (2016)

Add to Collection
Article Materials Science, Composites

Morphologies and electromagnetic interference shielding performances of microcellular epoxy/multi-wall carbon nanotube nanocomposite foams

Jiantong Li et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

Add to Collection
Article Engineering, Electrical & Electronic

Piezoresistive foam sensor arrays for marine applications

Jeff E. Dusek et al.

SENSORS AND ACTUATORS A-PHYSICAL (2016)

Add to Collection
Article Chemistry, Multidisciplinary

1D/2D Carbon Nanomaterial-Polymer Dielectric Composites with High Permittivity for Power Energy Storage Applications

Zhi-Min Dang et al.

SMALL (2016)

Add to Collection
Article Chemistry, Physical

Large-area reduced graphene oxide thin film with excellent thermal conductivity and electromagnetic interference shielding effectiveness

Pradip Kumar et al.

CARBON (2015)

Add to Collection
Article Engineering, Environmental

Development of high void fraction polylactide composite foams using injection molding: Crystallization and foaming behaviors

A. Ameli et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection
Article Construction & Building Technology

Improvement in electromagnetic interference shielding effectiveness of cement composites using carbonaceous nano/micro inerts

Rao Arsalan Khushnood et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection
Article Chemistry, Physical

Enhanced dielectric and electromagnetic interference shielding properties of FeSiAl/Al2O3 ceramics by plasma spraying

Yuchang Qing et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection
Article Polymer Science

Nanocomposite Foams of Polypropylene and Carbon Nanotubes: Preparation, Characterization, and Evaluation of their Performance as EMI Absorbers

Minh-Phuong Tran et al.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2015)

Add to Collection
Article Chemistry, Physical

Microwave absorbers designed from PVDF/SAN blends containing multiwall carbon nanotubes anchored cobalt ferrite via a pyrene derivative

Sourav Biswas et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection
Article Chemistry, Physical

Covalent interaction enhanced electromagnetic wave absorption in SiC/Co hybrid nanowires

Huan Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection
Article Nanoscience & Nanotechnology

Nano Ag-Deposited BaTiO3 Hybrid Particles as Fillers for Polymeric Dielectric Composites: Toward High Dielectric Constant and Suppressed Loss

Suibin Luo et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection
Article Chemistry, Multidisciplinary

Highly Aligned Graphene/Polymer Nanocomposites with Excellent Dielectric Properties for High-Performance Electromagnetic Interference Shielding

Nariman Yousefi et al.

ADVANCED MATERIALS (2014)

Add to Collection
Article Chemistry, Multidisciplinary

Reduced Graphene Oxides: Light-Weight and High-Efficiency Electromagnetic Interference Shielding at Elevated Temperatures

Bo Wen et al.

ADVANCED MATERIALS (2014)

Add to Collection
Article Chemistry, Physical

Polypropylene/carbon nanotube nano/microcellular structures with high dielectric permittivity, low dielectric loss, and low percolation threshold

A. Ameli et al.

CARBON (2014)

Add to Collection
Article Chemistry, Applied

Impact of foaming on the broadband dielectric properties of multi-walled carbon nanotube/polystyrene composites

Mohammad Arjmand et al.

JOURNAL OF CELLULAR PLASTICS (2014)

Add to Collection
Article Chemistry, Physical

The synergy of supercritical CO2 and supercritical N2 in foaming of polystyrene for cell nucleation

Anson Wong et al.

JOURNAL OF SUPERCRITICAL FLUIDS (2014)

Add to Collection
Article Materials Science, Composites

Preparation of Polylactide/Graphene Composites From Liquid-Phase Exfoliated Graphite Sheets

Xianye Li et al.

POLYMER COMPOSITES (2014)

Add to Collection
Article Chemistry, Multidisciplinary

Enhanced Dielectric Performance in Polymer Composite Films with Carbon Nanotube-Reduced Graphene Oxide Hybrid Filler

Jin-Young Kim et al.

SMALL (2014)

Add to Collection
Article Chemistry, Multidisciplinary

Electromagnetic interference shielding characteristics for orientation angle and number of plies of carbon fiber reinforced plastic

Hong Gun Kim et al.

CARBON LETTERS (2014)

Add to Collection
Article Nanoscience & Nanotechnology

Lightweight, Multifunctional Polyetherimide/Graphene@Fe3O4 Composite Foams for Shielding of Electromagnetic Pollution

Bin Shen et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Add to Collection
Article Nanoscience & Nanotechnology

Facile Preparation of Lightweight Microcellular Polyetherimide/Graphene Composite Foams for Electromagnetic Interference Shielding

Jianqiang Ling et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Add to Collection
Article Chemistry, Multidisciplinary

Lightweight and Flexible Graphene Foam Composites for High-Performance Electromagnetic Interference Shielding

Zongping Chen et al.

ADVANCED MATERIALS (2013)

Add to Collection
Review Chemistry, Multidisciplinary

Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage

Zhi-Min Dang et al.

ADVANCED MATERIALS (2013)

Add to Collection
Article Chemistry, Physical

Electrical properties and electromagnetic interference shielding effectiveness of polypropylene/carbon fiber composite foams

A. Ameli et al.

CARBON (2013)

Add to Collection
Article Engineering, Environmental

Critical processing parameters for foamed bead manufacturing in a lab-scale autoclave system

Yanting Guo et al.

CHEMICAL ENGINEERING JOURNAL (2013)

Add to Collection
Article Engineering, Chemical

Characterization of Expanded Polypropylene Bead Foams with Modified Steam-Chest Molding

Nemat Hossieny et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)

Add to Collection
Article Polymer Science

Preparation of microcellular thermoplastic elastomer foams from polystyrene-b-ethylene-butylene-b-polystyrene (SEBS) and their blends with polystyrene

Rahida Wati Binti Sharudin et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Add to Collection
Article Polymer Science

Foaming behavior of microcellular foam polypropylene/modified nano calcium carbonate composites

Jie Ding et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Add to Collection
Article Chemistry, Applied

Foaming behavior of microcellular thermoplastic olefin blends

Amirhossein Maani et al.

JOURNAL OF CELLULAR PLASTICS (2013)

Add to Collection
Article Materials Science, Multidisciplinary

Porosity and composition dependence on electrical and piezoresistive properties of thermoplastic polyurethane nanocomposites

Reza Rizvi et al.

JOURNAL OF MATERIALS RESEARCH (2013)

Add to Collection
Article Materials Science, Multidisciplinary

Dielectric, Electromagnetic Interference Shielding and Absorption Properties of Si3N4-PyC Composite Ceramics

Xuan Hao et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2013)

Add to Collection
Review Materials Science, Multidisciplinary

Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials

Jean-Michel Thomassin et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2013)

Add to Collection
Article Polymer Science

The influence of foam morphology of multi-walled carbon nanotubes/poly(methyl methacrylate) nanocomposites on electrical conductivity

Minh-Phuong Tran et al.

POLYMER (2013)

Add to Collection
Article Materials Science, Characterization & Testing

Effect of chemical and physical foaming additives on the properties of PP/wood flour composites

Franciela Arenhart Soares et al.

POLYMER TESTING (2013)

Add to Collection
Review Polymer Science

Processing strategies in bionanocomposites

Vincent Ojijo et al.

PROGRESS IN POLYMER SCIENCE (2013)

Add to Collection
Review Polymer Science

Polylactide (PLA)-based nanocomposites

Jean-Marie Raquez et al.

PROGRESS IN POLYMER SCIENCE (2013)

Add to Collection
Article Chemistry, Physical

Effective improvement of the properties of light weight carbon foam by decoration with multi-wall carbon nanotubes

Rajeev Kumar et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Add to Collection
Article Chemistry, Physical

Improved nanoindentation and microwave shielding properties of modified MWCNT reinforced polyurethane composites

Tejendra K. Gupta et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Add to Collection
Article Chemistry, Physical

A material with high electromagnetic radiation shielding effectiveness fabricated using multi-walled carbon nanotubes wrapped with poly(ether sulfone) in a poly(ether ether ketone) matrix

Hongsong Wang et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Add to Collection
Article Chemistry, Physical

Efficient electromagnetic interference shielding of lightweight graphene/polystyrene composite

Ding-Xiang Yan et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Add to Collection
Article Materials Science, Multidisciplinary

Moulded polypropylene foams produced using chemical or physical blowing agents: structure-properties relationship

Cristina Saiz-Arroyo et al.

JOURNAL OF MATERIALS SCIENCE (2012)

Add to Collection
Article Polymer Science

A convenient route for the dispersion of carbon nanotubes in polymers: Application to the preparation of electromagnetic interference (EMI) absorbers

Jean-Michel Thomassin et al.

POLYMER (2012)

Add to Collection
Article Engineering, Chemical

The orientation of carbon nanotubes in poly(ethylene-co-octene) microcellular foaming and its suppression effect on cell coalescence

Wentao Zhai et al.

POLYMER ENGINEERING AND SCIENCE (2012)

Add to Collection
Article Nanoscience & Nanotechnology

Tough Graphene-Polymer Microcellular Foams for Electromagnetic Interference Shielding

Hao-Bin Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2011)

Add to Collection
Article Materials Science, Composites

Selective location and conductive network formation of multiwalled carbon nanotubes in polycarbonate/poly(vinylidene fluoride) blends

Chang Su et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2011)

Add to Collection
Article Engineering, Chemical

Steam-Chest Molding of Expanded Polypropylene Foams. 2. Mechanism of Interbead Bonding

Wentao Zhai et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)

Add to Collection
Article Polymer Science

Crystallization Kinetics of Polypropylene Composites Filled with Nano Calcium Carbonate Modified with Maleic Anhydride

Hai Huang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

Add to Collection
Article Chemistry, Applied

Influence of supramolecular additives on foam morphology of injection-molded i-PP

Marieluise Stumpf et al.

JOURNAL OF CELLULAR PLASTICS (2011)

Add to Collection
Article Chemistry, Physical

Nucleating effect of calcium stearate coated CaCO3 nanoparticles on polypropylene

Yong Lin et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2011)

Add to Collection
Article Chemistry, Physical

Highly electrically conductive and high performance EMI shielding nanowire/polymer nanocomposites by miscible mixing and precipitation

Genaro A. Gelves et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Add to Collection
Article Chemistry, Multidisciplinary

Designing of multiwalled carbon nanotubes reinforced low density polyethylene nanocomposites for suppression of electromagnetic radiation

B. P. Singh et al.

JOURNAL OF NANOPARTICLE RESEARCH (2011)

Add to Collection
Article Materials Science, Multidisciplinary

CO2-Induced Mechanical Reinforcement of Polyolefin-Based Nanocellular Foams

Rahida Wati Binti Sharudin et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2011)

Add to Collection
Article Materials Science, Multidisciplinary

Functionalized Graphene-PVDF Foam Composites for EMI Shielding

Varrla Eswaraiah et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2011)

Add to Collection
Article Engineering, Chemical

Effect of Molecular Structure and Rheology on the Compression Foam Molding of Ethylene-α-Olefin Copolymers

Ying Zhang et al.

POLYMER ENGINEERING AND SCIENCE (2011)

Add to Collection
Review Polymer Science

New challenges in polymer foaming: A review of extrusion processes assisted by supercritical carbon dioxide

Martial Sauceau et al.

PROGRESS IN POLYMER SCIENCE (2011)

Add to Collection
Article Chemistry, Multidisciplinary

Preparation of High-Performance Conductive Polymer Fibers through Morphological Control of Networks Formed by Nanofillers

Hua Deng et al.

ADVANCED FUNCTIONAL MATERIALS (2010)

Add to Collection
Article Engineering, Chemical

Cell Structure Evolution and the Crystallization Behavior of Polypropylene/Clay Nanocomposites Foams Blown in Continuous Extrusion

Wentao Zhai et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)

Add to Collection
Article Polymer Science

Enhancing Cell Nucleation of Thermoplastic Polyolefin Foam Blown with Nitrogen

S. G. Kim et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2010)

Add to Collection
Article Polymer Science

Oxidized Multiwalled Carbon Nanotubes as Effective Reinforcement and Thermal Stability Agents of Poly(lactic acid) Ligaments

K. Chrissafis et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2010)

Add to Collection
Article Chemistry, Applied

Effects of Nucleating Agents' Shapes and Interfacial Properties on Cell Nucleation

Siu N. Leung et al.

JOURNAL OF CELLULAR PLASTICS (2010)

Add to Collection
Article Polymer Science

Relations Between the Aspect Ratio of Carbon Nanotubes and the Formation of Percolation Networks in Biodegradable Polylactide/Carbon Nanotube Composites

Defeng Wu et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2010)

Add to Collection
Article Polymer Science

The production and properties of polylactide composites filled with expanded graphite

Marius Murariu et al.

POLYMER DEGRADATION AND STABILITY (2010)

Add to Collection
Article Materials Science, Multidisciplinary

Intrinsic electromagnetic radiation shielding/absorbing characteristics of polyaniline-coated transparent thin films

B. R. Kim et al.

SYNTHETIC METALS (2010)

Add to Collection
Article Thermodynamics

Detail kinetic analysis of the thermal decomposition of PLA with oxidized multi-walled carbon nanotubes

K. Chrissafis

THERMOCHIMICA ACTA (2010)

Add to Collection
Article Chemistry, Multidisciplinary

A Graphene Hybrid Material Covalently Functionalized with Porphyrin: Synthesis and Optical Limiting Property

Yanfei Xu et al.

ADVANCED MATERIALS (2009)

Add to Collection
Article Chemistry, Physical

Modified carbon nanotube composites with high dielectric constant, low dielectric loss and large energy density

Cheng Yang et al.

CARBON (2009)

Add to Collection
Review Chemistry, Physical

A review of vapor grown carbon nanofiber/polymer conductive composites

Mohammed H. Al-Saleh et al.

CARBON (2009)

Add to Collection
Review Polymer Science

EMI Shielding: Methods and Materials-A Review

S. Geetha et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

Add to Collection
Article Polymer Science

Macromol. Mater. Eng. 12/2009

James Ramontja et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2009)

Add to Collection
Article Polymer Science

Selective Localization and Migration of Multiwalled Carbon Nanotubes in Blends of Polycarbonate and Poly(styrene-acrylonitrile)

Andreas Goeldel et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2009)

Add to Collection
Article Nanoscience & Nanotechnology

Low percolation transitions in carbon nanotube networks dispersed in a polymer matrix: dielectric properties, simulations and experiments

Ricardo Simoes et al.

NANOTECHNOLOGY (2009)

Add to Collection
Article Engineering, Chemical

Experimental and numerical studies on the effects of pressure release rate on number density of bubbles and bubble growth in a polymeric foaming process

Kentaro Taki

CHEMICAL ENGINEERING SCIENCE (2008)

Add to Collection
Article Engineering, Chemical

Microporous foams of polymer blends of poly(L-lactic acid) and poly(ε-caprolactone)

Takaaki Tanaka et al.

DESALINATION (2008)

Add to Collection
Article Polymer Science

A study of carbon nanotubes/biodegradable plastic polylactic acid composites

Wei-Ming Chiu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

Add to Collection
Article Chemistry, Applied

Foamability of thermoplastic vulcanizates blown with various physical blowing agents

Seong G. Kim et al.

JOURNAL OF CELLULAR PLASTICS (2008)

Add to Collection
Article Chemistry, Applied

Understanding melt rheology and foamability of polypropylene-based TPO blends

F. Gunkel et al.

JOURNAL OF CELLULAR PLASTICS (2008)

Add to Collection
Article Chemistry, Physical

Carbon nanotube-enhanced polyurethane scaffolds fabricated by thermally induced phase separation

Gavin Jell et al.

JOURNAL OF MATERIALS CHEMISTRY (2008)

Add to Collection
Article Chemistry, Physical

Foams of polycaprolactone/MWNT nanocomposites for efficient EMI reduction

Jean-Michel Thomassin et al.

JOURNAL OF MATERIALS CHEMISTRY (2008)

Add to Collection
Article Materials Science, Multidisciplinary

Electromagnetic interference (EMI) shielding effectiveness of PP/PS polymer blends containing high structure carbon black

Mohammed H. Al-Saleh et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2008)

Add to Collection
Article Nanoscience & Nanotechnology

Processable aqueous dispersions of graphene nanosheets

Dan Li et al.

NATURE NANOTECHNOLOGY (2008)

Add to Collection
Article Polymer Science

Influence of twin-screw extrusion conditions on the dispersion of multi-walled carbon nanotubes in a poly(lactic acid) matrix

Tobias Villmow et al.

POLYMER (2008)

Add to Collection
Article Materials Science, Composites

Impedance analysis and electromagnetic interference shielding effectiveness of conductive carbon black reinforced microcellular EPDM rubber vulcanizates

S. R. Mahapatra et al.

POLYMER COMPOSITES (2008)

Add to Collection
Article Polymer Science

Study on the preparation and characterization of biodegradable polylactide/multi-walled carbon nanotubes nanocomposites

Chin-San Wu et al.

POLYMER (2007)

Add to Collection
Article Chemistry, Applied

Controlling morphology of injection molded structural foams by mold design and processing parameters

Andreas N. J. Spoerrer et al.

JOURNAL OF CELLULAR PLASTICS (2007)

Add to Collection
Article Chemistry, Multidisciplinary

Ultralight conductive carbon-nanotube-polymer composite

Xiang-Bin Xu et al.

SMALL (2007)

Add to Collection
Article Materials Science, Multidisciplinary

Use of nitrogen as a blowing agent for the production of fine-celled high-density polyethylene foams

John W. S. Lee et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2006)

Add to Collection
Article Chemistry, Applied

The effects of exfoliated nano-clay on the extrusion microcellular foaming of amorphous and crystalline nylon

Wenge Zheng et al.

JOURNAL OF CELLULAR PLASTICS (2006)

Add to Collection
Article Construction & Building Technology

Cement based electromagnetic shielding and absorbing building materials

Hongtao Guan et al.

CEMENT & CONCRETE COMPOSITES (2006)

Add to Collection
Article Polymer Science

The processing-structure relationships in thin microcellular PET sheet prepared by compression molding

Rong Guan et al.

EUROPEAN POLYMER JOURNAL (2006)

Add to Collection
Article Chemistry, Multidisciplinary

Electromagnetic interference (EMI) shielding of single-walled carbon nanotube epoxy composites

Ning Li et al.

NANO LETTERS (2006)

Add to Collection
Review Materials Science, Composites

Polymer nanocomposite foams

LJ Lee et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2005)

Add to Collection
Article Chemistry, Multidisciplinary

Novel carbon nanotube-polystyrene foam composites for electromagnetic interference shielding

YL Yang et al.

NANO LETTERS (2005)

Add to Collection
Article Polymer Science

Intrinsically conducting polymers for electromagnetic interference shielding

YY Wang et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2005)

Add to Collection
Article Polymer Science

Novel carbon nanotube/poly(L-lactic acid) nanocomposites; Their modulus, thermal stability, and electrical conductivity

SI Moon et al.

MACROMOLECULAR SYMPOSIA (2005)

Add to Collection
Article Engineering, Chemical

Study of injection molded microcellular polyamide-6 nanocomposites

MJ Yuan et al.

POLYMER ENGINEERING AND SCIENCE (2004)

Add to Collection
Article Polymer Science

Fundamental foaming mechanisms governing the volume expansion of extruded polypropylene foams

HE Naguib et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)

Add to Collection
Article Materials Science, Multidisciplinary

New polylactide/layered silicate nanocomposites, 6 - Melt rheology and foam processing

SS Ray et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2003)

Add to Collection
Article Materials Science, Multidisciplinary

Intercalated polycarbonate/clay nanocomposites: Nanostructure control and foam processing

M Mitsunaga et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2003)

Add to Collection
Article Polymer Science

Foam extrusion of high density polyethylene/wood-flour composites using chemical foaming agents

QX Li et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2003)

Add to Collection
Article Engineering, Chemical

Extrusion of polystyrene nanocomposite foams with supercritical CO2

XM Han et al.

POLYMER ENGINEERING AND SCIENCE (2003)

Add to Collection
Article Polymer Science

Preparation of microcellular poly(ethylene terephthalate) and its properties

R Guan et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2003)

Add to Collection
Article Polymer Science

Well-controlled biodegradable nanocomposite foams: From microcellular to nanocellular

Y Fujimoto et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2003)

Add to Collection
Article Polymer Science

Modification of precipitated calcium carbonate to improve its activity toward elastomers

M Lipinska et al.

MACROMOLECULAR SYMPOSIA (2003)

Add to Collection
Article Chemistry, Applied

Single-step rotational foam molding of skin-surrounded polyethylene foams

R Pop-Iliev et al.

JOURNAL OF CELLULAR PLASTICS (2003)

Add to Collection
Article Engineering, Chemical

Rotational foam molding of polypropylene with control of melt strength

R Pop-Iliev et al.

ADVANCES IN POLYMER TECHNOLOGY (2003)

Add to Collection
Article Engineering, Chemical

The importance of timely polymer sintering while processing polypropylene foams in rotational molding

R Pop-Iliev et al.

POLYMER ENGINEERING AND SCIENCE (2003)

Add to Collection
Article Engineering, Chemical

Continuous microcellular polystyrene foam extrusion with supercritical CO2

XM Han et al.

POLYMER ENGINEERING AND SCIENCE (2002)

Add to Collection
Article Engineering, Chemical

Foam processing and cellular structure of polypropylene/clay nanocomposites

PH Nam et al.

POLYMER ENGINEERING AND SCIENCE (2002)

Add to Collection
Article Engineering, Chemical

Strategies for achieving ultra low-density polypropylene foams

HE Naguib et al.

POLYMER ENGINEERING AND SCIENCE (2002)

Add to Collection
Article Materials Science, Composites

Melt compounding based rotational foam molding technology for manufacture of polypropylene foams

R Pop-Iliev et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2002)

Add to Collection
Article Chemistry, Multidisciplinary

Biaxial flow-induced alignment of silicate layers in polypropylene/clay nanocomposite foam

M Okamoto et al.

NANO LETTERS (2001)

Add to Collection
Article Chemistry, Multidisciplinary

A house of cards structure in polypropylene/clay nanocomposites under elongational flow

M Okamoto et al.

NANO LETTERS (2001)

Add to Collection
Article Computer Science, Interdisciplinary Applications

A comparison of transparent boundary conditions for the fresnel equation

D Yevick et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2001)

Add to Collection
Article Physics, Applied

High frequency electromagnetic interference shielding response of mixtures and multilayer films based on conducting polymers

J Joo et al.

JOURNAL OF APPLIED PHYSICS (2000)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.