☆ 4.8 Article

Influence of the Uneven Temperature Distribution on the Electrode Warpage of PP IGBTs

IEEE TRANSACTIONS ON POWER ELECTRONICS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Electrical & Electronic

Junction-to-Case Thermal Resistance Measurement and Analysis of Press-Pack IGBTs Under Double-Side Cooling Condition

Jie Chen et al.

Summary: This article proposes an indirect method to measure the thermal resistance R-thjc of the press-pack IGBTs (PP IGBTs) under double-side cooling condition, and develops a simpler definition method for double-sided R-thjc. A thermomechanical bidirectional coupling finite element model is built to explain the impact mechanism. The equivalence of the two methods is discussed based on theoretical analysis and experiment.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Systematic Analysis and Characterization of Extreme Failure for IGCT in MMC-HVdc System-Part I: Device Structure, Explosion Characteristics, and Optimization

Wenpeng Zhou et al.

Summary: This research focuses on explosion proof of power devices in the MMC-HVdc system, with integrated gate commutated thyristor (IGCT) identified as the device with the simplest housing structure. Testing and analysis show that IGCT with evenly distributed destruction positions exhibits excellent explosion proof, while IGCT with edge focusing destruction positions performs poorly. By optimizing the design of IGCT, it is validated to have excellent explosion proof.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Multidisciplinary

A Fully Coupled Model of Multi-Chip Press-Pack IGBT for Thermo-Mechanical Stress Distribution Prediction

Cao Zhan et al.

Summary: This article proposes a fully coupled multiphysical model for multichip press-pack insulated gate bipolar transistor (PPI) considering surface roughness. The model successfully couples the electrical, thermal, and mechanical domains through contact resistance, allowing for simultaneous prediction of temperature and stress. The influence of surface roughness on thermo-mechanical stress distribution is analyzed and validated through temperature measurement and observation of fretting scratches. Additionally, a strain-life fatigue model is established, showing the impact of surface roughness on the fatigue life of the chip metallization area.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Systematic Analysis and Characterization of Extreme Failure for IGCT in MMC-HVdc System-Part II: Failure Mechanism and Short Circuit Characteristics

Wenpeng Zhou et al.

Summary: This study investigates the short circuit failure mode (SCFM) of integrated gate commutated thyristor (IGCT) in high voltage direct current power transmission. The short circuit mechanism is proposed based on experimental results, revealing that IGCT with turn-OFF failure exhibits a self-triggering effect, while IGCT with surge current failure distributes the short current among multiple initial destruction areas.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Thermal Contact Resistance Optimization of Press-Pack IGBT Device Based on Liquid Metal Thermal Interface Material

Xiao Wang et al.

Summary: This article proposes a method to optimize the thermal contact resistances of PP-IGBT devices by filling liquid metal thermal interface materials. The results show that the optimized device reduces the junction-to-case thermal resistance by over 30%, improving the thermal reliability of large-capacity PP-IGBT devices.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Wear-Out Mechanism of Press-Pack IGBTs Under Accelerated Aging Test

Cao Zhan et al.

Summary: This article investigates the wear-out mechanism of press-pack insulated-gate bipolar transistors (IGBTs) (PPIs) using both numerical and experimental methods. Three wear-out modes are observed: fretting scratches, cracks next to the additional metallization area, and oxidation of the additional metallization area. The fully coupled multiphysical model is utilized to analyze the temperature, pressure, and voltage distribution, and it is found that fretting wear is the main reason for the three wear-out modes.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Manufacturing

Thermal and Mechanical Analyses of Clamping Area on the Performance of Press-Pack IGBT in Series-Connection Stack Application

Siyang Dai et al.

Summary: In this study, the effects of clamping area on PP-IGBT performance were investigated using the finite-element method, revealing that collector lid warpage leads to decreased contact area. Increasing clamping area can improve stress uniformity of the chips.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Sequential Vce(T) Method for the Accurate Measurement of Junction Temperature Distribution Within Press-Pack IGBTs

Yiming Zhang et al.

Summary: In this article, a sequential V-ce(T) method with separated gate controller is proposed to measure the junction temperature distribution within press-pack insulated gate bipolar transistors (PP IGBTs). The method is integrated into a standard dc power cycling test to validate its applicability and effectiveness. The measured junction temperature exhibits a specific distribution pattern influenced primarily by the deformation of the copper plate.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Elastic Half-Space Theory-Based Distributed-Press-Pack Packaging Technology for Power Module With Balanced Thermal Stress

Yao Chang et al.

Summary: This article develops a distributed-press-pack (DPP) packaging technology to achieve balanced thermal stress on chips. By decentralizing the pressing load and selecting the appropriate clamping method, mechanical stress distribution is improved, and power density is increased by integrating busbars and heatsinks. A DPP prototype is implemented and the effect of the proposed technology on thermal stress balance is verified.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Compact Sandwiched Press-Pack SiC Power Module With Low Stray Inductance and Balanced Thermal Stress

Yao Chang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Add to Collection

Article Engineering, Manufacturing

A Physical Thermal Network Model of Press Pack IGBTs Considering Spreading and Coupling Effects

Yiming Zhang et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Investigation on the Effects of Unbalanced Clamping Force on Multichip Press Pack IGBT Modules

Wei Lai et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Design, analysis, and testing of PP-IGBT-based submodule stack for the MMC VSC HVDC with 3000A DC bus current

Huifeng Chen et al.

JOURNAL OF ENGINEERING-JOE (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Study on the Method to Measure the Junction-to-Case Thermal Resistance of Press-Pack IGBTs

Erping Deng et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Influence of Temperature on the Pressure Distribution Within Press Pack IGBTs

Erping Deng et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Characterizations of a Proposed 3300-V Press-Pack IGBT Module Using Nanosilver Paste for High-Voltage Applications

Jingjing Feng et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Analysis on the difference of the characteristic between high power IGBT modules and press pack IGBTs

Erping Deng et al.

MICROELECTRONICS RELIABILITY (2017)

Add to Collection

Article Engineering, Manufacturing

Thermomechanical Analysis and Characterization of a Press-Pack Structure for SiC Power Module Packaging Applications

Yafan Zhang et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Energy & Fuels

Press-pack IGBTs for HVDC and FACTS

Robin Simpson et al.

CSEE JOURNAL OF POWER AND ENERGY SYSTEMS (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Possible failure modes in Press-Pack IGBTs

Lukas Tinschert et al.

MICROELECTRONICS RELIABILITY (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Influence of the clamping pressure on the electrical, thermal and mechanical behaviour of press-pack IGBTs

T. Poller et al.

MICROELECTRONICS RELIABILITY (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Mechanical analysis of press-pack IGBTs

T. Poller et al.

MICROELECTRONICS RELIABILITY (2012)

Add to Collection

Article Engineering, Electrical & Electronic

Thermo-mechanical finite element analysis in press-packed IGBT design

A Pirondi et al.

MICROELECTRONICS RELIABILITY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.