4.8 Article

Copper-Wire Stress Buffers for Extending Lifetime of Double-Sided Bidirectional SiC Modules

Related references

Note: Only part of the references are listed.
Article Engineering, Electrical & Electronic

Interleaved Planar Packaging Method of Multichip SiC Power Module for Thermal and Electrical Performance Improvement

Fengtao Yang et al.

Summary: Double-sided cooling based on planar packaging method outperforms traditional single-sided cooling based on wire bonds. However, it still faces thermal and electrical challenges in multichip SiC power modules. This article proposes an interleaved planar packaging method to address the optimization contradiction between thermal and electrical performance and enhance the current capability and reliability of power modules.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Article Engineering, Electrical & Electronic

Reliable Aluminum Wire-Bonded SiC/Si Diodes With Laminated Al/Cu Stress Buffers

Xiao-Di Li et al.

Summary: A novel laminated Al/Cu soft stress buffer was proposed in this study to reduce thermo-mechanical stress of wire-bonded power modules. It showed a longer lifetime compared to direct bonding on SiC chips.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Article Engineering, Electrical & Electronic

A Double-Side Cooled SiC MOSFET Power Module With Sintered-Silver Interposers: I-Design, Simulation, Fabrication, and Performance Characterization

Chao Ding et al.

Summary: This article introduces a method of reducing thermomechanical stresses in power modules using porous interposers made of low-temperature sintered silver, and designs and fabricates a double-side cooled half-bridge module. By utilizing these interposers, thermal stresses at vulnerable interfaces are reduced, simplifying the module fabrication process.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

A Double-Sided Bidirectional Power Module With Low Heat Concentration and Low Thermomechanical Stress

Junlin Cao et al.

Summary: This paper addresses the thermal mismatch issue in double-sided BDS modules by proposing a solution using bridge buffering spacers to improve heat dissipation and reduce thermomechanical stresses. Simulation and testing results demonstrate that the lifetime of double-sided BDS modules can be significantly increased by using bridge buffering spacers.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

A Way to Reduce Leakage Current and Improve Reliability of Wire-Bonds for 300-A Multichip SiC Hybrid Modules

Wenbin Deng et al.

Summary: This article introduces a method to improve the reliability of wire-bonds using pressureless sintering of nanosilver paste and demonstrates corresponding experimental results. The study shows that this technology can extend the lifetime of wire-bonds, reduce leakage current of modules, and the cost is relatively low.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

Compact Sandwiched Press-Pack SiC Power Module With Low Stray Inductance and Balanced Thermal Stress

Yao Chang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Article Engineering, Electrical & Electronic

10-kV SiC MOSFET Power Module With Reduced Common-Mode Noise and Electric Field

Christina M. DiMarino et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Article Engineering, Electrical & Electronic

Design Methodology of DC Power Cycling Test Setup for SiC MOSFETs

Fei Yang et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2020)

Article Engineering, Electrical & Electronic

Analysis and Modeling of SiC JFET Bi-Directional Switches Parasitic Oscillation

Lina Wang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)

Article Engineering, Electrical & Electronic

Design and Characterizations of a Planar Multichip Half-Bridge Power Module by Pressureless Sintering of Nanosilver Paste

Wen Liu et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2019)

Article Engineering, Electrical & Electronic

Reliability Improvement of a Double-Sided IGBT Module by Lowering Stress Gradient Using Molybdenum Buffers

Meiyu Wang et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2019)

Article Engineering, Electrical & Electronic

Electrical Performance Advancement in SiC Power Module Package Design With Kelvin Drain Connection and Low Parasitic Inductance

Fei Yang et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2019)

Article Engineering, Electrical & Electronic

A Lumped Thermal Model Including Thermal Coupling and Thermal Boundary Conditions for High-Power IGBT Modules

Amir Sajjad Bahman et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

Article Engineering, Electrical & Electronic

Failure and Reliability Analysis of a SiC Power Module Based on Stress Comparison to a Si Device

Borong Hu et al.

IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY (2017)

Article Engineering, Electrical & Electronic

A Study on Basic Characteristics of the Proximity Effect on Conductors

Takashi Asada et al.

IEEE TRANSACTIONS ON POWER DELIVERY (2017)

Article Engineering, Electrical & Electronic

Reliability Evaluation of Multichip Phase-Leg IGBT Modules Using Pressureless Sintering of Nanosilver Paste by Power Cycling Tests

Shancan Fu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2017)

Article Engineering, Electrical & Electronic

New Approach for Accurate Prediction of Eddy Current Losses in Laminated Material in the Presence of Skin Effect With 2-D FEA

Mehdi Taghizadeh Kakhki et al.

IEEE TRANSACTIONS ON MAGNETICS (2016)

Article Engineering, Electrical & Electronic

Built-in Reliability Design of Highly Integrated Solid-State Power Switches With Metal Bump Interconnects

Jianfeng Li et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)

Article Engineering, Electrical & Electronic

Electrical method to measure the transient thermal impedance of insulated gate bipolar transistor module

Mei-Yu Wang et al.

IET POWER ELECTRONICS (2015)

Article Engineering, Electrical & Electronic

Thermomechanical Assessment of Die-Attach Materials for Wide Bandgap Semiconductor Devices and Harsh Environment Applications

Luis A. Navarro et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2014)

Article Engineering, Electrical & Electronic

Temperature Measurement of Power Semiconductor Devices by Thermo-Sensitive Electrical Parameters-A Review

Yvan Avenas et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2012)

Article Engineering, Manufacturing

Planar Power Module With Low Thermal Impedance and Low Thermomechanical Stress

Xiao Cao et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2012)

Article Engineering, Manufacturing

Parametric Study of Joint Height for a Medium-Voltage Planar Package

Xiao Cao et al.

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2010)