☆ 4.8 Article

A Parameter Tuning Method for a Double-Sided Compensated IPT System With Constant-Voltage Output and Efficiency Optimization

IEEE TRANSACTIONS ON POWER ELECTRONICS (2023)

Related references

Note: Only part of the references are listed.

Article Automation & Control Systems

A Self-Tuning LCC/LCC System Based on Switch-Controlled Capacitors for Constant-Power Wireless Electric Vehicle Charging

Zhichao Luo et al.

Summary: This article proposes a self-tuning LCC/LCC wireless power transfer system based on switch-controlled capacitors, which can maintain a high power factor and fixed output power in the presence of self or mutual inductance variation. Experimental results demonstrate that the system is effective in maintaining high power factor and desired DC output power under different magnetic shielding materials.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2023)

Add to Collection

Article Engineering, Electrical & Electronic

A Family of Hybrid IPT Couplers With High Tolerance to Pad Misalignment

Wei Zhao et al.

Summary: This article proposes a family of hybrid IPT couplers that can achieve high tolerance to magnetic pad misalignments and are applicable to all IPT compensation topologies. In addition, the design principles for hybrid couplers with different coil winding polarities are provided. Finally, a 3-kW IPT prototype is built to verify the analytical findings.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Research on Input-Parallel Single-Switch Wireless Power Transfer System With Constant-Current and Constant-Voltage Output

Quanlei Zhang et al.

Summary: This article presents a new input-parallel single-switch LC-resonant circuit, which uses switchable secondary networks for constant-current and constant-voltage output and avoids the shoot-through problem of power switches. The decoupling simplifies the analysis and calculation. Furthermore, by controlling one relay, constant-current and constant-voltage output modes can be achieved without the need for additional converters.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Efficiency Improvement of Dual-Receiver WPT Systems Based on Partial Power Processing Control

Shunpan Liu et al.

Summary: This article proposes a partial power processing control method for dual-receiver wireless power transfer systems, which adjusts the variable angle phase-shift and active rectifiers to improve power efficiency.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Automation & Control Systems

A New Coil Structure of Dual Transmitters and Dual Receivers With Integrated Decoupling Coils for Increasing Power Transfer and Misalignment Tolerance of Wireless EV Charging System

Amran Hossain et al.

Summary: This article introduces a new inductive power transfer (IPT) system with dual transmitters and dual receivers, as well as integrated decoupling coils. The proposed decoupling coils not only mitigate the mutual inductances of the same-side coils, but also participate in power transmission, and have good misalignment performance.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

Add to Collection

Article Automation & Control Systems

A Hybrid Modulation Control for Wireless Power Transfer Systems to Improve Efficiency Under Light-Load Conditions

Yong Li et al.

Summary: This article addresses the issue of high reactive power leading to low efficiency in traditional wireless power transfer systems. A mathematical model is established to reveal how reactive power decreases system efficiency. A hybrid modulation control strategy is proposed and validated through experimental results, showing high efficiencies up to 94.29% in a wide load range.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

Add to Collection

Article Automation & Control Systems

Coil-to-Coil Efficiency Optimization of Double-Sided LCC Topology for Electric Vehicle Inductive Chargers

Van-Thuan Nguyen et al.

Summary: This article presents an efficiency optimization of a double-sided LCC compensation network for inductive power transfer systems. By defining and optimizing the compensation factors of the primary and secondary LCC circuit, a high and sustained efficiency over a wide range of load and misalignment is achieved. Experimental results show good agreement with theoretical analysis.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A Unipolar-Duty-Cycle Hybrid Control Strategy of Series-Series Compensated IPT System for Constant-Current Output and Efficiency Optimization

Yafei Chen et al.

Summary: This article introduces a hybrid control strategy based on UDC modulation technique for series-series compensated IPT system. The strategy achieves ZVS and CCO under varying coupling coefficients and load, leading to higher overall efficiency.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A Novel S-S-LCLCC Compensation for Three-Coil WPT to Improve Misalignment and Energy Efficiency Stiffness of Wireless Charging System

Peyman Darvish et al.

Summary: Recent studies have shown that the three-coil wireless power transfer design outperforms the two-coil design in efficiency and performance, especially as source resistance and transmission distance increase. The new design allows for load-independent output voltage throughout the charging process, improving energy efficiency and reducing voltage stress.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

An Energy Injection Method to Improve Power Transfer Capability of Bidirectional WPT System With Multiple Pickups

Xin Dai et al.

Summary: This article proposes a method to enhance the power transfer capability of track WPT systems by reverse energy injection from online pickups to transiently over-rated pickups. A bioperation mode and a bidirectional pickup topology are designed for this purpose, and a synchronization method and a criterion for reverse energy injection boundary are presented. The proposed method is verified through experimental results.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

DC-Link and Switched Capacitor Control for Varying Coupling Conditions in Inductive Power Transfer System for Unmanned Aerial Vehicles

Hailong Zhang et al.

Summary: The article introduces a hybrid control method based on dc-link and switched capacitor control to address the limitations of electric-powered UAVs in charging range and stability. Experimental results demonstrate that the method can achieve stable output voltage with a maximum efficiency of 91.9%, effectively improving efficiency.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A Wireless Vehicle-to-Grid-to-Home Power Interface With an Adaptive DC Link

Lei Wang et al.

Summary: This article introduces a wireless bidirectional grid power interface for electric vehicles, which improves power flow between the grid, EVs, and homes with nonlinear loads. Experimental results and comparative analysis demonstrate the effectiveness of the proposed concept.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2021)

Add to Collection

Article Automation & Control Systems

A Hybrid Control Strategy of LCC-S Compensated WPT System for Wide Output Voltage and ZVS Range With Minimized Reactive Current

Xiaoqiang Wang et al.

Summary: This article presents a hybrid control strategy for regulating the output voltage of a wireless power transfer system, aiming to achieve wide output voltage regulation and minimize reactive current. Experimental results show that zero voltage switching can be achieved throughout the voltage range, and a high efficiency can be obtained.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A Novel Clamp Coil Assisted IPT Battery Charger With Inherent CC-to-CV Transition Capability

Zhicong Huang et al.

Summary: The novel clamp coil assisted IPT battery charger proposed in this letter features an inherent, passive, automatic, and smooth CC-to-CV transition, which eliminates the necessity of state-of-charge detection and active control, making it rugged and reliable. Minimalist design and near-unity power factor make it suitable for wireless onboard charging applications, with experiment results validating its capability.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A Design Method to Implement ZVS for Electric Vehicle Wireless Charging System With Double-Side LCC Compensation

Fusheng Wang et al.

Summary: This article realizes the zero voltage switching (ZVS) of the inverter in the electric vehicle wireless charging system through parameter optimization design of compensation components, improving system efficiency. The effects of parameter adjustment of compensation components under different output voltages and coupling coefficients were analyzed, providing a basis for component optimization design. A specific parameter design method was proposed and verified through experimental results.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Constant Current Charging and Maximum System Efficiency Tracking for Wireless Charging Systems Employing Dual-Side Control

Kai Song et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Variable-Parameter T-Circuit-Based IPT System Charging Battery With Constant Current or Constant Voltage Output

Yang Chen et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

An Efficiency Optimization-Based Asymmetric Tuning Method of Double-Sided LCC Compensated WPT System for Electric Vehicles

Yafei Chen et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Load-Independent Voltage and Current Transfer Characteristics of High-Order Resonant Network in IPT System

Jianghua Lu et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Sensitivity Analysis of Inductive Power Transfer Systems With Voltage-Fed Compensation Topologies

Jianghua Lu et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2019)

Add to Collection

Article Engineering, Electrical & Electronic

An IPT Battery Charger With Near Unity Power Factor and Load-Independent Constant Output Combating Design Constraints of Input Voltage and Transformer Parameters

Xiaohui Qu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)

Add to Collection

Article Energy & Fuels

An LCC-P Compensated Wireless Power Transfer System with a Constant Current Output and Reduced Receiver Size

Zhengchao Yan et al.

ENERGIES (2019)

Add to Collection

Article Computer Science, Information Systems

The Load Estimation and Power Tracking Integrated Control Strategy for Dual-Sides Controlled LCC Compensated Wireless Charging System

Qiang Zhao et al.

IEEE ACCESS (2019)

Add to Collection

Article Computer Science, Information Systems

A Switching Hybrid LCC-S Compensation Topology for Constant Current/Voltage EV Wireless Charging

Yafei Chen et al.

IEEE ACCESS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

A Novel Parameter Tuning Method for a Double-Sided LCL Compensated WPT System With Better Comprehensive Performance

Yousu Yao et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Analysis of Output Current Characteristics for Higher Order Primary Compensation in Inductive Power Transfer Systems

Jia Hou et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Implementation of the Constant Current and Constant Voltage Charge of Inductive Power Transfer Systems With the Double-Sided LCC Compensation Topology for Electric Vehicle Battery Charge Applications

Van-Binh Vu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

Add to Collection

Article Engineering, Multidisciplinary

A Double-T-Type Compensation Network and Its Tuning Method for IPT System

Yijie Wang et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2017)

Add to Collection

Article Engineering, Electrical & Electronic

S/CLC Compensation Topology Analysis and Circular Coil Design for Wireless Power Transfer

Yijie Wang et al.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Compensation Topologies of High-Power Wireless Power Transfer Systems

Wei Zhang et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Double-LCL resonant compensation network for electric vehicles wireless power transfer: experimental study and analysis

Chuang Liu et al.

IET POWER ELECTRONICS (2016)

Add to Collection

Article Engineering, Electrical & Electronic

A Double-Sided LCC Compensation Network and Its Tuning Method for Wireless Power Transfer

Siqi Li et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Analysis and Control of Series/Series-Parallel Compensated Resonant Converter for Contactless Power Transfer

Jia Hou et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2015)

Add to Collection

Article Automation & Control Systems

High-Misalignment Tolerant Compensation Topology For ICPT Systems

Juan L. Villa et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2012)

Add to Collection

Article Automation & Control Systems

ZCS LCC-Compensated Resonant Inverter for Inductive-Power-Transfer Application

Zeljko Pantic et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2011)

Add to Collection

Article Engineering, Electrical & Electronic

Optimizing the AC resistance of multilayer transformer windings with arbitrary current waveforms

WG Hurley et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.