☆ 4.8 Article

An Intuitive and Noniterative Design Methodology for CLLC Chargers Employing Simplified Operation Modes Model

IEEE TRANSACTIONS ON POWER ELECTRONICS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Electrical & Electronic

Synchronous Rectification Based on Resonant Inductor Voltage for CLLC Bidirectional Converter

Ning Chen et al.

Summary: This article proposes a synchronous rectification (SR) scheme based on resonant inductor voltage, which indirectly obtains the polarity of the resonant current through the inductor voltage, avoiding the use of current sensors. A corresponding SR control strategy is proposed to handle the false pulses problem caused by parasitic oscillation, and the effectiveness of the proposed SR method is verified through experimental results.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A Constant Current Control Method With Improved Dynamic Performance for CLLC Converters

Huan Chen et al.

Summary: A novel constant current control method is proposed for the CLLC converter, which improves dynamic performance and effectively controls the charging and discharging process of the output capacitor.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Switching Transition Analysis and Optimization for Bidirectional CLLC Resonant DC Transformer

Yuliang Cao et al.

Summary: The demand for isolated bidirectional dc transformers (DCX) is increasing due to the rapid development of energy storage systems, data center power supplies, and transportation electrification. This article proposes a dual-active synchronization (DAS) modulation for traditional CLLC-DCX to solve power flow and current distortion issues, and introduces a desirable switching transition called Sync-ZVS with zero-voltage switching and load-independent voltage gain. The proposed ACS method and DAS modulation are verified through prototype testing with high efficiency.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Design Methodology of Bidirectional Resonant CLLC Charger for Wide Voltage Range Based on Parameter Equivalent and Time Domain Model

Lie Zhao et al.

Summary: This paper proposes a novel design methodology of bidirectional CLLC resonant converter based on parameter equivalent and time domain model. The proposed method can meet the requirements of bidirectional power flow and zero-voltage switching under wide voltage range conditions in battery chargers and energy storage systems.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A Battery Charging Method With Natural Synchronous Rectification Features for Full-Bridge CLLC Converters

Huan Chen et al.

Summary: This article proposes a natural synchronous rectification (SR) battery charging method for a full-bridge CLLC converter. By considering the parameter matching design process and SR control, the proposed method achieves a charging process with natural SR features. Experimental results demonstrate the effectiveness of the method and an obvious efficiency improvement.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A New Approach to Steady-State Modeling, Analysis, and Design of Power Converters

Mohammad Daryaei et al.

Summary: This article presents a systematic procedure to model a broad class of power converters using ordinary differential equations with periodic and discontinuous inputs, and provides an approach to determine closed-form expressions for their steady-state waveforms. The value of this Laplace-based steady-state modeling (LBSM) method is demonstrated by obtaining closed-form expressions for the steady-state waveforms of different types of converters, and their characteristics are validated through simulations and experiments.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Automation & Control Systems

A Novel Three-Level CLLC Resonant DC-DC Converter for Bidirectional EV Charger in DC Microgrids

Yang Xuan et al.

Summary: This article proposes a novel three-level CLLC resonant converter for off-board EV charger, which enables bidirectional power transmission between the dc microgrid and EV. Through a hardware prototype, the feasibility and advantages of the proposed converter have been verified.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Light-Load Performance Enhancement Technique for LLC-Based PEV Charger Through Circuit Reconfiguration

Dongdong Shu et al.

Summary: A novel light-load performance enhancement technique is proposed to improve voltage regulation capability and efficiency by reconfiguring the structure of the primary and secondary sides. A corresponding converter prototype is designed and tested to validate the concept, showing significant improvement in efficiency.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Design Methodology for Symmetric CLLC Resonant DC Transformer Considering Voltage Conversion Ratio, System Stability, and Efficiency

Fanfan Lin et al.

Summary: With the increasing popularity of dc microgrid, the symmetric CLLC resonant dual active bridge converter is commonly used as a dc transformer (DCT) in such applications. However, challenges arise in the design of CLLC-DCT, including deviation in voltage conversion ratio (VCR) due to fluctuating values of inductors or capacitors, system instability when connected to a constant power load, and the need for high efficiency even with parameter fluctuations. A five-stage design methodology has been proposed to address these concerns, using particle swarm optimization for optimization and validation through a 1-kW hardware prototype.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Bidirectional Resonant CLLC Charger for Wide Battery Voltage Range: Asymmetric Parameters Methodology

Jun Min et al.

Summary: The bidirectional resonant CLLC converter has potential applications in battery chargers and dc microgrids. By proposing an Asymmetric Parameters Methodology (APM), this article addresses the limitations of symmetric design in meeting the requirements of bidirectional battery chargers.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Proceedings Paper Green & Sustainable Science & Technology

A Simplified Time-Domain Gain Model for CLLC Resonant Converter

Yuliang Cao et al.

Summary: A simplified time-domain gain model for the CLLC resonant converter was proposed in this paper, based on the superposition principle and energy conservation law, which showed higher accuracy compared to the FHA method and could be used with both resistance and battery load. The boundary conditions between different operation modes in the CLLC converter were also analyzed. The proposed time-domain gain model was verified through simulated and experimental results of a 15 kW prototype.

2021 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE) (2021)

Add to Collection

Proceedings Paper Engineering, Electrical & Electronic

DC Distribution Converter with Partial Power Processing for LVDC/MVDC Systems

Yuliang Cao et al.

Summary: This paper proposes an overall design procedure for input-parallel output-series (IPOS) partial power (PP) converter for use in dc distribution converter (DDC) in medium-voltage DC (MVDC) system. The design process is validated through an 18 kW, 500 kHz PP DDC prototype with 98.8% peak efficiency and 142 W/in(3) power density achieved.

2021 IEEE FOURTH INTERNATIONAL CONFERENCE ON DC MICROGRIDS (ICDCM) (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Simplified Resonant Parameter Design of the Asymmetrical CLLC-Type DC Transformer in the Renewable Energy System via Semi-Artificial Intelligent Optimal Scheme

Jingjing Huang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

High-Efficiency High-Power-Density CLLC Resonant Converter With Low-Stray-Capacitance and Well-Heat-Dissipated Planar Transformer for EV On-Board Charger

Zhengda Zhang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Add to Collection

Article Automation & Control Systems

Robust Circuit Parameters Design for the CLLC-Type DC Transformer in the Hybrid AC-DC Microgrid

Jingjing Huang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

Add to Collection

Article Automation & Control Systems

Alternative Approach to Analysis and Design of Series Resonant Converter at Steady State

Mohammad Daryaei et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

99% Efficient 10 kV SiC-Based 7 kV/400 V DC Transformer for Future Data Centers

Daniel Rothmund et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2019)

Add to Collection

Article Automation & Control Systems

Extended Harmonics Based Phase Tracking for Synchronous Rectification in CLLC Converters

Arun Sankar et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

Add to Collection

Article Automation & Control Systems

AI Algorithm-Based Two-Stage Optimal Design Methodology of High-Efficiency CLLC Resonant Converters for the Hybrid AC-DC Microgrid Applications

Bin Zhao et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Sliding Mode Control Scheme for a CLLC Resonant Converter

Shenli Zou et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)

Add to Collection

Article Automation & Control Systems

Integrated Half-Bridge CLLC Bidirectional Converter for Energy Storage Systems

Chunjiang Zhang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

A Modified Gain Model and the Corresponding Design Method for an LLC Resonant Converter

Jianqiang Liu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Modeling and Control of a Resonant Dual Active Bridge With a Tuned CLLC Network

Wynand Louis Malan et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2016)

Add to Collection

Article Automation & Control Systems

Design of LLC Resonant Converters Based on Operation-Mode Analysis for Level Two PHEV Battery Chargers

Junjun Deng et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Design of Bidirectional DC-DC Resonant Converter for Vehicle-to-Grid (V2G) Applications

Zaka Ullah Zahid et al.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Design Methodology of Bidirectional CLLC Resonant Converter for High-Frequency Isolation of DC Distribution Systems

Jee-Hoon Jung et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Operation Mode Analysis and Peak Gain Approximation of the LLC Resonant Converter

Xiang Fang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2012)

Add to Collection

Article Automation & Control Systems

Snubberless Bidirectional DC-DC Converter With New CLLC Resonant Tank Featuring Minimized Switching Loss

Wei Chen et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.