☆ 4.8 Article

A Resonant Inductor Integrated-Transformer-Based Receiver for Wireless Power Transfer Systems

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2023)

Related references

Note: Only part of the references are listed.

Article Automation & Control Systems

Soft Switching for Strongly Coupled Wireless Power Transfer System With 90° Dual-Side Phase Shift

Yiming Zhang et al.

Summary: This article investigates the soft switching operations of the inverter and rectifier in a strongly coupled series-series wireless power transfer system. Through time-domain analysis, it is found that a dual-side 90 degrees phase shift can avoid the hard switching of the inverter, enhance power level, and eliminate noise.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

Add to Collection

Article Engineering, Multidisciplinary

Foreign Object Detection in Wireless Power Transfer Systems

Jianghua Lu et al.

Summary: The successful commercialization of wireless power transfer technology requires a safe, reliable, and efficient charging infrastructure. However, metal objects and living organisms in close proximity to the charging system can pose safety hazards and affect system performance. This article provides a review of available designs for detecting metal and living objects in wireless power transfer systems, including their limitations and potential applications. It also suggests research topics to promote the development and commercialization of wireless charging systems.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2022)

Add to Collection

Article Engineering, Multidisciplinary

Receiver Position Identification Method of Wireless Power Transfer System Based on Magnetic Integration Inductance

Zhimeng Liu et al.

Summary: This article proposes a receiver position identification (RPI) method based on magnetic integration compensation inductance, which uses the voltage, current, and transmitter current of the inductance to achieve the detection. Compared with conventional methods, this proposed method does not require additional detection coils or position sensors, allowing RPI to be realized based on the electric parameters of the inductance and transmitter. The method analyzes the coupling relationships between the inductance, transmitter, and receiver in different wiring modes, determines a minimal coupling impact inductance structure, and demonstrates the ability to detect the receiver position in the x-y plane without secondary-side information through experimental verification.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A Hybrid Modulation Featuring Two-Phase Clamped Discontinuous PWM and Zero Voltage Switching for 99% Efficient DC-Type EV Charger

Junzhong Xu et al.

Summary: This paper proposes a new hybrid modulation method to address the high switching losses and large volume issues of two-stage AC-DC converters in DC-type EV chargers. By using a two-phase clamped discontinuous pulse-width-modulation (DPWM) in the front-end circuit, and cooperating it with the variable frequency triangular-current-mode (TCM) zero voltage switching (ZVS) or boundary-ZVS (B-ZVS) strategy in the back-end circuit, the system can reduce switching losses to the best extent and improve power density.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Duty Cycle Control Strategy for Dual-Side LCC Resonant Converter in Wireless Power Transfer Systems

Huang Li et al.

Summary: This article proposes a new duty cycle control strategy for a dual-side LCC resonant converter. The strategy can reduce the complexity and cost of wireless power transfer systems, while significantly decreasing the switching frequency of the secondary side.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Current-Decomposition-Based Digital Phase Synchronization Method for BWPT System

Shiqiao Zhao et al.

Summary: This letter proposes a digital phase synchronization method for bidirectional wireless power transfer system, which controls the voltage phase of the secondary high-frequency converter by adjusting the reactive current to achieve phase synchronization with the primary converter. The method demonstrates advantages of fast response and high reliability, verified through a 1-kW prototype.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

CLL Resonant Converter With Secondary Side Resonant Inductor and Integrated Magnetics

Yue Liu et al.

Summary: A CLL resonant converter with transformer-inductor-integrated magnetics is proposed, aiming to reduce losses and volume of the magnetic core by removing the circulating current associated with the transformer magnetizing current and increasing the phase difference between the transformer and resonant inductor flux. The integrated transformer-inductor structure is designed for optimized performance and validated through simulation and experimental results.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A Hybrid Class-E Topology With Constant Current and Constant Voltage Output for Light EVs Wireless Charging Application

Houji Li et al.

Summary: This article proposes a switched-capacitor-based Class-E circuit to extend the operating power range of the Class-E circuit and achieve constant current and constant voltage output modes, with the advantages of fewer components, simpler implementation, and higher reliability. The studied compensation network can also be extended to other inverter topologies.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2021)

Add to Collection

Article Automation & Control Systems

Dual Side Phase-Shift Control of Wireless Power Transfer Implemented on Primary Side Based on Driving Windings

Yiming Zhang et al.

Summary: This paper proposes a dual-side phase-shift implementation method for wireless power transfer, which regulates the phase difference between the primary-side power and driving windings to control the phase difference between the dual-side power windings, achieving independent dual-side regulation from power transfer.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Improved Interoperability Evaluation Method for Wireless Charging Systems Based on Interface Impedance

Guang Yang et al.

Summary: This paper proposes an impedance measurement method using the power decomposition algorithm for wireless charging systems, which significantly reduces measurement errors. Compared to the traditional method, this proposed method reduces the relative error of impedance measurement to less than 10%.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Review Engineering, Electrical & Electronic

800-V Electric Vehicle Powertrains: Review and Analysis of Benefits, Challenges, and Future Trends

Iman Aghabali et al.

Summary: The adoption of 800-V battery electric vehicles (BEVs) can lead to higher charging rates, but also requires careful consideration for the design of all electrical systems. This article reviews the current state of 800-V vehicle powertrain electrical design and discusses the benefits, challenges, and future trends associated with multiple vehicle powertrain components.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2021)

Add to Collection

Article Engineering, Multidisciplinary

Interoperability Improvement for Rectangular Pad and DD Pad of Wireless Electric Vehicle Charging System Based on Adaptive Position Adjustment

Guang Yang et al.

Summary: This article investigates the issue of interoperability between popular charging pads in wireless charging for electric vehicles, aiming to improve it by modeling and adjusting the relative position of the pads. Experimental results demonstrate that the proposed method can optimize the interoperability by achieving optimal power output and efficiency at the best position.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Auxiliary Power Supply for Medium-&x002F;High-Voltage and High-Power Solid-State Transformers

Jianqiang Liu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

An Efficiency Optimization-Based Asymmetric Tuning Method of Double-Sided LCC Compensated WPT System for Electric Vehicles

Yafei Chen et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Add to Collection

Article Automation & Control Systems

A Control Strategy for Efficiency Optimization and Wide ZVS Operation Range in Bidirectional Inductive Power Transfer System

Xiaoming Zhang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

Add to Collection

Article Computer Science, Information Systems

A Hybrid Compensation Topology With Single Switch for Battery Charging of Inductive Power Transfer Systems

Hailong Zhang et al.

IEEE ACCESS (2019)

Add to Collection

Article Computer Science, Information Systems

A Switching Hybrid LCC-S Compensation Topology for Constant Current/Voltage EV Wireless Charging

Yafei Chen et al.

IEEE ACCESS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Constant Current/Voltage Charging Operation for Series-Series and Series-Parallel Compensated Wireless Power Transfer Systems Employing Primary-Side Controller

Kai Song et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Hybrid Topology With Configurable Charge Current and Charge Voltage Output-Based WPT Charger for Massive Electric Bicycles

Yang Chen et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Analysis of efficiency improvement in wireless power transfer system

Xin Liu et al.

IET POWER ELECTRONICS (2018)

Add to Collection

Article Automation & Control Systems

Wireless Power Transfer Resonance Coupling Amplification by Load-Modulation Switching Controller

Dukju Ahn et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Analysis and Tracking of Optimal Load in Wireless Power Transfer Systems

Minfan Fu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

A Maximum Efficiency Point Tracking Control Scheme for Wireless Power Transfer Systems Using Magnetic Resonant Coupling

Hongchang Li et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Maximum Energy Efficiency Tracking for Wireless Power Transfer Systems

W. X. Zhong et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

A Double-Sided LCC Compensation Network and Its Tuning Method for Wireless Power Transfer

Siqi Li et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.