Related references
Note: Only part of the references are listed.Greener and sustainable production of bioethylene from bioethanol: current status, opportunities and perspectives
Farrukh Jamil et al.
REVIEWS IN CHEMICAL ENGINEERING (2022)
Experimental and numerical investigation of brazed plate heat exchangers-A new approach
Alireza Jafari et al.
APPLIED THERMAL ENGINEERING (2022)
The role of environmental technology for energy demand and energy efficiency: Evidence from OECD countries
Sudharshan Reddy Paramati et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)
Numerical investigations on thermal performance and flame stability of hydrogen-fueled micro tube combustor with injector for thermophotovoltaic applications
Wei Zuo et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)
Thermophotovoltaic efficiency of 40%
Alina LaPotin et al.
NATURE (2022)
Natural gas reforming in thermochemical waste-heat recuperation systems: A review
Dmitry Pashchenko
ENERGY (2022)
Decarbonisation of heat: Analysis of the potential of low temperature waste heat in UK industries
Ronald Muhumuza et al.
JOURNAL OF CLEANER PRODUCTION (2022)
A review of boiler waste heat recovery technologies in the medium-low temperature range
Yiyu Men et al.
ENERGY (2021)
Thermo-economic optimization and part-load analysis of the combined supercritical CO2 and Kalina cycle
Gang Fan et al.
ENERGY CONVERSION AND MANAGEMENT (2021)
Opportunities and strategies for multigrade waste heat utilization in various industries: A recent review
Zixiang Su et al.
ENERGY CONVERSION AND MANAGEMENT (2021)
A review of industrial waste heat recovery system for power generation with Organic Rankine Cycle: Recent challenges and future outlook
Reyhaneh Loni et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Performance comparison of different heat pumps in low-temperature waste heat recovery
Zhimin Tan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
Numerical investigations on hydrogen-fueled micro-cylindrical combustors with cavity for micro-thermophotovoltaic applications
Wei Zuo et al.
ENERGY (2021)
Modeling and determination of total heat exchange factor of regenerative reheating furnace based on instrumented slab trials
Wenchao Ji et al.
CASE STUDIES IN THERMAL ENGINEERING (2021)
Thermoeconomic Optimization of Steam Pressure of Heat Recovery Steam Generator in Combined Cycle Gas Turbine under Different Operation Strategies
Zhen Wang et al.
ENERGIES (2021)
Is zeotropic working fluid a promising option for organic Rankine cycle: A quantitative evaluation based on literature data
Weicong Xu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
The potential utilization of slag generated from iron- and steelmaking industries: a review
Xiaolei Zhang et al.
ENVIRONMENTAL GEOCHEMISTRY AND HEALTH (2020)
Flexible Piezoelectric Energy Harvester with Extremely High Power Generation Capability by Sandwich Structure Design Strategy
Jing Fu et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Numerical investigations on thermal performance enhancement of hydrogen-fueled micro planar combustors with injectors for micro-thermophotovoltaic applications
Wei Zuo et al.
ENERGY (2020)
Exergoeconomic performance comparison, selection and integration of industrial heat pumps for low grade waste heat recovery
Mengying Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Influence of flue gas recirculation on the performance of incinerator-waste heat boiler and NOx emission in a 500 t/d waste-to-energy plant
Jun Liu et al.
WASTE MANAGEMENT (2020)
An economic dispatch model for combined heat and power systems considering the characteristics of heat recovery steam generators
Binbin Chen et al.
INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2020)
Cu-Based Thermoelectrochemical Cells for Direct Conversion of Low-Grade Waste Heat into Electricity
Sang-Mun Jung et al.
ACS APPLIED ENERGY MATERIALS (2020)
Thermodynamic, economic, and environmental analysis of new combined power and space cooling system for waste heat recovery in waste-to-energy plant
Fulu Lu et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Techno-economic potential of waste heat recovery from German energy-intensive industry with Organic Rankine Cycle technology
R. Pili et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Energy saving technologies and mass-thermal network optimization for decarbonized iron and steel industry: A review
R. Q. Wang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Applications of geothermal organic Rankine Cycle for electricity production
A. Ahmadi et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Thermal design and optimization of a heat recovery steam generator in a combined-cycle power plant by applying a genetic algorithm
Ali Rezaie et al.
ENERGY (2019)
Thermodynamic evaluation of a waste gas-fired steam power plant in an iron and steel facility using enhanced exergy analysis
Kadir Yilmaz et al.
ENERGY (2019)
A review of heat transfer enhancement techniques in plate heat exchangers
Ji Zhang et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Experimental and theoretical investigation on a radiative flat heat pipe heat exchanger
Sulaiman Almahmoud et al.
ENERGY (2019)
An overview of environmental sustainability in cement and steel production
P. V. Nidheesh et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Review of the Working Fluid Thermal Stability for Organic Rankine Cycles
Xiaoye Dai et al.
JOURNAL OF THERMAL SCIENCE (2019)
Optimization of energy use with CO2 emission reducing in an integrated iron and steel plant
Qi Zhang et al.
APPLIED THERMAL ENGINEERING (2019)
Stacked autoencoder for operation prediction of coke dry quenching process
Jian-Guo Wang et al.
CONTROL ENGINEERING PRACTICE (2019)
Thermoelectric cooler and thermoelectric generator devices: A review of present and potential applications, modeling and materials
Seyed Mohsen Pourkiaei et al.
ENERGY (2019)
Techno-economic assessment of the horizontal geothermal heat pump systems: A comprehensive review
Yuanlong Cui et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
The internal combustion engine as a CO2 reformer
Hendrik Gossler et al.
COMBUSTION AND FLAME (2019)
NO and SO2 emissions in palm kernel shell catalytic steam gasification with in-situ CO2 adsorption for hydrogen production in a pilot-scale fluidized bed gasification system
Zakir Khan et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Review on the recent progress of thermochemical materials and processes for solar thermal energy storage and industrial waste heat recovery
Hasila Jarimi et al.
INTERNATIONAL JOURNAL OF LOW-CARBON TECHNOLOGIES (2019)
Burdening proportion and new energy-saving technologies analysis and optimization for iron and steel production system
Xun Shen et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Energy-efficient outdoor cultivation of oleaginous microalgae at northern latitudes using waste heat and flue gas from a pulp and paper mill
Susanne Ekendahl et al.
ALGAL RESEARCH-BIOMASS BIOFUELS AND BIOPRODUCTS (2018)
A Critical Review: Shape Optimization of Welded Plate Heat Exchangers based on Grey Correlation Theory
Saad Ahmed Javed et al.
APPLIED THERMAL ENGINEERING (2018)
Reducing industrial energy demand in the UK: A review of energy efficiency technologies and energy saving potential in selected sectors
Jahedul Islam Chowdhury et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Waste heat recovery of power plant with large scale serial absorption heat pumps
Z. Y. Xu et al.
ENERGY (2018)
Waste heat recovery technologies and applications
Hussam Jouhara et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)
Industrial waste heat recovery: A systematic approach
Elliot Woolley et al.
SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2018)
Innovative thermodynamic parametric investigation of gas and steam bottoming cycles with heat exchanger and heat recovery steam generator: Energy and exergy analysis
M. N. Khan et al.
ENERGY REPORTS (2018)
Optimization of By-Products Reuse in the Steel Industry: Valorization of Secondary Resources with a Particular Attention on Their Pelletization
Ismael Matino et al.
WASTE AND BIOMASS VALORIZATION (2017)
Modeling, thermodynamic and techno-economic analysis of coke production process with waste heat recovery
Shiyue Qin et al.
ENERGY (2017)
Experimental and theoretical investigation of a flat heat pipe heat exchanger for waste heat recovery in the steel industry
Hussam Jouhara et al.
ENERGY (2017)
Assessment of the optimum operation conditions on a heat pipe heat exchanger for waste heat recovery in steel industry
Hongting Ma et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Corrugated plate heat exchanger review
Talal M. Abou Elmaaty et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Blast Furnace Gas Based Combustion Systems in Steel Reheating Furnaces
Victor Cuervo-Pinera et al.
INFUB - 11TH EUROPEAN CONFERENCE ON INDUSTRIAL FURNACES AND BOILERS (INFUB-11) (2017)
Preliminary assessment of waste heat potential in major European industries
Gregoris P. Panayiotou et al.
PROCEEDINGS OF 1ST INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY AND RESOURCE USE IN FOOD CHAINS (ICFES 2017), INCLUDING SYMPOSIUM ON HEAT RECOVERY AND EFFICIENT CONVERSION AND UTILISATION OF WASTE HEAT (2017)
Recuperators for micro gas turbines: A review
Gang Xiao et al.
APPLIED ENERGY (2017)
Prospects of waste heat recovery and power generation using thermoelectric generators
Bradley Orr et al.
1ST INTERNATIONAL CONFERENCE ON ENERGY AND POWER, ICEP2016 (2017)
Experimental study on heat pipe assisted heat exchanger used for industrial waste heat recovery
Hongting Ma et al.
APPLIED ENERGY (2016)
Potential for energy savings by heat recovery in an integrated steel supply chain
Martin McBrien et al.
APPLIED THERMAL ENGINEERING (2016)
A review of car waste heat recovery systems utilising thermoelectric generators and heat pipes
B. Orr et al.
APPLIED THERMAL ENGINEERING (2016)
Review on Thermionic Energy Converters
Kamarul Aizat Abdul Khalid et al.
IEEE TRANSACTIONS ON ELECTRON DEVICES (2016)
Estimating the global waste heat potential
Clemens Forman et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Exergy analysis of a solar combined cycle: organic Rankine cycle and absorption cooling system
Lavinia Grosu et al.
INTERNATIONAL JOURNAL OF ENERGY AND ENVIRONMENTAL ENGINEERING (2016)
Recent development and application of thermoelectric generator and cooler
Wei He et al.
APPLIED ENERGY (2015)
Industrial waste heat recovery technologies: An economic analysis of heat transformation technologies
Sarah Brueckner et al.
APPLIED ENERGY (2015)
Thermodynamic optimization opportunities for the recovery and utilization of residual energy and heat in China's iron and steel industry: A case study
Lingen Chen et al.
APPLIED THERMAL ENGINEERING (2015)
Fecal microbiota transplantation broadening its application beyond intestinal disorders
Meng-Que Xu et al.
WORLD JOURNAL OF GASTROENTEROLOGY (2015)
WASTE HEAT RECOVERY IN HEAT PUMP SYSTEMS: SOLUTION TO REDUCE GLOBAL WARMING
Y. Baradey et al.
IIUM ENGINEERING JOURNAL (2015)
Thermal comfort and building energy consumption implications - A review
Liu Yang et al.
APPLIED ENERGY (2014)
Energy and exergy analysis for waste heat cascade utilization in sinter cooling bed
Yan Liu et al.
ENERGY (2014)
Thermoelectric Generation Using Waste Heat in Steel Works
Takashi Kuroki et al.
JOURNAL OF ELECTRONIC MATERIALS (2014)
Carbon Reduction Programs and Key Technologies in Global Steel Industry
Jian-xun Fu et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2014)
Thermo - Photo - Voltaic Generator Development
Claudio Ferrari et al.
ATI 2013 - 68TH CONFERENCE OF THE ITALIAN THERMAL MACHINES ENGINEERING ASSOCIATION (2014)
Design guidelines for thermo-photo-voltaic generator: The critical role of the emitter size
G. Attolini et al.
APPLIED ENERGY (2013)
A review of waste heat recovery technologies towards molten slag in steel industry
Hui Zhang et al.
APPLIED ENERGY (2013)
An overview of developments in adsorption refrigeration systems towards a sustainable way of cooling
Biplab Choudhury et al.
APPLIED ENERGY (2013)
ORC waste heat recovery in European energy intensive industries: Energy and GHG savings
F. Campana et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
Application of Pinch Analysis in an Integrated Steel Plant in Northern Sweden
Carl-Erik Grip et al.
ISIJ INTERNATIONAL (2013)
Energy saving study on a large steel plant by total site based pinch technology
Kazuo Matsuda et al.
APPLIED THERMAL ENGINEERING (2012)
Thermodynamic analysis of alternative refrigeration cycles driven from waste heat in a food processing application
Mathew Aneke et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2012)
A review of heat pipe systems for heat recovery and renewable energy applications
Hassam Nasarullah Chaudhry et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
An MILP model for optimization of byproduct gases in the integrated iron and steel plant
Haining Kong et al.
APPLIED ENERGY (2010)
Study on a compact silica gel-water adsorption chiller without vacuum valves: Design and experimental study
C. J. Chen et al.
APPLIED ENERGY (2010)
Waste-heat recovery potential in Turkish textile industry: Case study for city of Bursa
E. Pulat et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)
Transient response of multi-pass plate heat exchangers considering the effect of flow maldistribution
N. Srihari et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2008)
Exergy analysis on the irreversibility of rotary air preheater in thermal power plant
Hong Yue Wang et al.
ENERGY (2008)
Proposal and analysis of a novel ammonia-water cycle for power and refrigeration cogeneration
Meng Liu et al.
ENERGY (2007)
Thermodynamic analysis of a novel absorption power/cooling combined-cycle
DX Zheng et al.
APPLIED ENERGY (2006)
Energy modelling of district cooling system for new urban development
TT Chow et al.
ENERGY AND BUILDINGS (2004)
Building-mix optimization in district-cooling system implementation
TT Chow et al.
APPLIED ENERGY (2004)
Performance analysis of a triple pressure HRSG
JY Shin et al.
KSME INTERNATIONAL JOURNAL (2003)
Share Paper
