☆ 4.5 Article

Effect of L-T and S-T orientations on fatigue crack growth in an aluminum 7050-T7451 plate

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Numerical prediction of fatigue crack growth based on cumulative plastic strain versus experimental results for AA6082-T6

D. M. Neto et al.

Summary: This study predicts fatigue crack growth using the finite element method, and compares the numerical predictions with experimental measurements on MT specimens made of 6082-T6 aluminium. The results indicate that cyclic plastic deformation is the main damage mechanism governing fatigue crack growth, but the accuracy of the numerical solutions needs improvement.

INTERNATIONAL JOURNAL OF FRACTURE (2023)

Add to Collection

Article Mechanics

Numerical analysis of fatigue crack growth under SuperBlock2020 load sequence

D. M. Neto et al.

Summary: This study investigated the effects of different load blocks on fatigue crack growth rate and found that crack closure is the main mechanism.

ENGINEERING FRACTURE MECHANICS (2022)

Add to Collection

Article Engineering, Mechanical

Effect of load blocks on fatigue crack growth

D. M. Neto et al.

Summary: This research uses a numerical approach to study fatigue crack growth in different load sequences and materials. The results confirm that cyclic plastic deformation is the main damage mechanism and crack closure can explain different crack behaviors. The lack of material hardening significantly affects the crack tip behavior.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

Add to Collection

Article Engineering, Mechanical

Fatigue crack propagation analysis in 2024-T351 aluminium alloy using nonlinear parameters

M. F. Borges et al.

Summary: In this study, fatigue crack growth (FCG) in the 2024-T351 aluminium alloy was investigated using the plastic CTOD range, Delta op. Experimental tests demonstrated an increase in FCG rate with increasing stress ratio, indicating the presence of crack closure phenomenon. The plastic deformation near the crack tip can be quantified using either plastic CTOD or cumulative plastic strain.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Engineering, Mechanical

A damaging function ΔKd for analyzing FCG and R-ratios in metallic materials

Daniel Kujawski

Summary: This paper introduces a damaging stress intensity function Delta K-d for analyzing fatigue crack growth in metallic materials under constant amplitude loading. The formulation is based on the sum of strain and complementary energy and discusses its effect on FCG rate behavior at various R-ratios. It does not rely on crack closure assumption or fitting parameters for R 0.6, and introduces an experimentally determined correction factor for high R 0.7 to account for the excessive forward plastic zone size and its impact on FCG process.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

Add to Collection

Article Engineering, Mechanical

An interpretation and modification of the SWT function

Daniel Kujawski

Summary: In this paper, a new interpretation and modification of the SWT function in terms of the total damaging energy density are proposed and discussed. The proposed approach shows a consistent correlation of the mean stress effects for both positive and negative mean stresses.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

Add to Collection

Article Mechanics

Limitations of small-scale yielding for fatigue crack growth

B. Marques et al.

Summary: The study introduces a simple criterion to define the boundaries of small-scale yielding (SSY) and large-scale yielding (LSY), impacting the validity of using Delta K as a parameter for fatigue crack growth rate. Various factors such as crack length, material yield stress, and stress conditions influence the transition between SSY and LSY, cautioning against assumptions of Delta K validity for high strength alloys.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Engineering, Mechanical

Mechanisms of fatigue crack growth in Ti-6Al-4V alloy subjected to single overloads

D. M. Neto et al.

Summary: The study investigates the relative importance of crack closure and residual stresses on fatigue crack growth (FCG) by numerically predicting FCG in CT specimens of Ti-6Al-4V alloy subjected to single overloads. The results show that crack closure is responsible for the effect of overloads on FCG rate behavior, while residual stresses are not relevant for the material studied. The transient behavior obtained after overload is unattainable without considering the contact of the crack flanks.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Study on the Influence of the Gurson-Tvergaard-Needleman Damage Model on the Fatigue Crack Growth Rate

Edmundo R. Sergio et al.

Summary: This study analyzes fatigue crack growth through cumulative plastic strain and a damage model, evaluating the influence of GTN parameters on crack growth rate. The results demonstrate a connection between porosity values and crack closure level, with initial porosity having a small effect on predicted crack growth rate. Sensitivity analysis identifies nucleation amplitude and Tvergaard's loss of strength parameter as main factors affecting crack growth rate.

METALS (2021)

Add to Collection

Article Engineering, Mechanical

Effect of Young's modulus on fatigue crack growth

M. F. Borges et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Engineering, Mechanical

Challenging the ΔKeff is the driving force for fatigue crack growth hypothesis

Julian Andres Ortiz Gonzalez et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Engineering, Mechanical

Numerical simulation of fatigue crack growth based on accumulated plastic strain

M. F. Borges et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical Prediction of the Fatigue Crack Growth Rate in SLM Ti-6Al-4V Based on Crack Tip Plastic Strain

Fabio F. Ferreira et al.

METALS (2020)

Add to Collection

Article Chemistry, Physical

Revisiting Classical Issues of Fatigue Crack Growth Using a Non-Linear Approach

Micael F. Borges et al.

MATERIALS (2020)

Add to Collection

Article Engineering, Mechanical

Fatigue crack closure: A myth or a misconception?

Jie Tong et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Influence of severe plastic deformation and specimen orientation on the fatigue crack propagation behavior of a pearlitic steel

T. Leitner et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Review Multidisciplinary Sciences

Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: A review

Ali Abd El-Aty et al.

JOURNAL OF ADVANCED RESEARCH (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Separating plasticity-induced closure and residual stress contributions to fatigue crack retardation following an overload

Enrico Salvati et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2017)

Add to Collection

Article Engineering, Mechanical

How proper similitude can improve our understanding of crack closure and plasticity in fatigue

R. C. Alderliesten

INTERNATIONAL JOURNAL OF FATIGUE (2016)

Add to Collection

Article Engineering, Mechanical

A numerical analysis of the mechanisms behind plasticity induced crack closure: Application to variable amplitude loadings

F. V. Antunes et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Revisiting fatigue crack growth in various grain size regimes of Ni

Thomas Leitner et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Engineering, Multidisciplinary

Applying Nagata patches to smooth discretized surfaces used in 3D frictional contact problems

D. M. Neto et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2014)

Add to Collection

Article Mechanics

Loading history effect on fatigue crack growth of extruded AZ31B magnesium alloy

Sanlong Zheng et al.

ENGINEERING FRACTURE MECHANICS (2013)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Fatigue Crack Propagation in New Generation Aluminium Alloys

Sebastien Richard et al.

ADVANCES IN FRACTURE AND DAMAGE MECHANICS X (2012)

Add to Collection

Article Mechanics

Fatigue crack propagation in 7050-T7451 plate alloy

Joel J. Schubbe

ENGINEERING FRACTURE MECHANICS (2009)

Add to Collection

Review Computer Science, Interdisciplinary Applications

Algorithms and strategies for treatment of large deformation frictional contact in the numerical simulation of deep drawing process

M. C. Oliveira et al.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2008)

Add to Collection

Review Engineering, Mechanical

A review of some plasticity and viscoplasticity constitutive theories

J. L. Chaboche

INTERNATIONAL JOURNAL OF PLASTICITY (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Towards a new model of crack tip stress fields

C. J. Christopher et al.

INTERNATIONAL JOURNAL OF FRACTURE (2007)

Add to Collection

Article Engineering, Mechanical

Mode I fatigue crack growth under biaxial loading

R Hamam et al.

INTERNATIONAL JOURNAL OF FATIGUE (2005)

Add to Collection

Article Engineering, Mechanical

Effects of surface deformation and crack closure on fatigue crack propagation after overloading and underloading

C Makabe et al.

INTERNATIONAL JOURNAL OF FATIGUE (2004)

Add to Collection

Article Mechanics

Evaluation of overload effects on fatigue crack growth and closure

LP Borrego et al.

ENGINEERING FRACTURE MECHANICS (2003)

Add to Collection

Article Engineering, Mechanical

A new (ΔK+Kmax)0.5 driving force parameter for crack growth in aluminum alloys

D Kujawski

INTERNATIONAL JOURNAL OF FATIGUE (2001)

Add to Collection

Article Engineering, Mechanical

Fatigue crack growth and crack closure in an AlMgSi alloy

LP Borrego et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2001)

Add to Collection

Article Engineering, Mechanical

Enhanced model of partial crack closure for correlation of R-ratio effects in aluminum alloys

D Kujawski

INTERNATIONAL JOURNAL OF FATIGUE (2001)

Add to Collection

Article Engineering, Industrial

Three-dimensional numerical simulation of the deep-drawing process using solid finite elements

LF Menezes et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.