☆ 4.8 Article

Debromination with Bromine Recovery from Pyrolysis of Waste Printed Circuit Boards Offers Economic and Environmental Benefits

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Review Green & Sustainable Science & Technology

A comprehensive review on pyrolysis of E-waste and its sustainability

Amirhossein Andooz et al.

Summary: This article provides a comprehensive review of the pyrolysis of e-waste and its sustainability. It discusses the structure and components of five major types of e-waste. It carefully studies and presents the merits and demerits of five methods of e-waste pyrolysis. It examines the sustainability of the pyrolysis process from three perspectives: economic, environmental, and social. It also addresses the ongoing challenges of e-waste pyrolysis and provides recommendations for future directions.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Engineering, Environmental

Removal of Bromine from the non-metallic fraction in printed circuit board via its Co-pyrolysis with alumina

Labeeb Ali et al.

Summary: This study examines the potential of using alumina as a debromination agent in PCBs, demonstrating its effectiveness through experimental and theoretical frameworks. Various characterization techniques confirm the transformation of alumina into aluminum bromides and oxy-bromides in co-pyrolysis with non-metallic fractions of PCBs, highlighting its capacity as a HBr fixation agent during e-waste thermal treatment.

WASTE MANAGEMENT (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Economic efficiency of resource recovery-analysis of time-dependent changes on sustainability perception of waste management scenarios

Tihomir Tomic et al.

Summary: Previous studies on waste management sustainability often overlook time-dependent changes and focus on independent analyses or multicriterial ranking. This study introduces a new Economic Efficiency of Resource Recovery index and considers legislation-related changes, providing insights into overall sustainability trends.

CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2022)

Add to Collection

Article Engineering, Environmental

Synergistic effects during co-pyrolysis of milled wood lignin and polyolefins at the gas phase and liquid/solid phase contacting modes

Chuan Ma et al.

Summary: The co-pyrolysis of biomass and waste plastics can enhance the production of fuels and valuable chemicals, with PE and PP blends showing different behaviors in terms of weight loss and decomposition. The GP mode of the co-pyrolysis process resulted in significantly increased yields of gasoline and kerosene by enhancing cracking of PE intermediates, while the LSP mode inhibited rearrangement reactions of PP intermediates, leading to more wax products being converted into liquid.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Capturing approach for the toxic bromides generated in low-temperature pyrolysis of brominated resin

Jie Zhu et al.

Summary: This study accurately analyzed the capture capacity and mechanism of CaCO3 and activated carbon to bromides through quantum chemistry calculation and wet experiments, providing scientific information and approach to the safe resource recovery of waste brominated resin.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Engineering, Environmental

An integrated utilization strategy of printed circuit boards and waste tire by fast co-pyrolysis: Value-added products recovery and heteroatoms transformation

Chuan Ma et al.

Summary: Fast co-pyrolysis is a promising technique for solving environmental issues and recovering value-added products from polymer wastes. This study comprehensively investigated the co-pyrolysis of printed circuit boards and waste tires, finding that increasing the temperature during pyrolysis improved the interactions between the two materials and increased the formation of aliphatic and aromatic compounds, as well as promoting the formation of p-cymene.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Investigation on the heat transfer and product characteristics of waste PCB recycled by a novel pilot-scale pyrolysis furnance

Na Du et al.

Summary: This study designed an innovative fixed-bed pyrolysis experiment system and proposed detailed temperature measurements to analyze the impact and delays of temperature acceleration in the pyrolysis process. The analysis of pyrolysis products using various techniques provided valuable information for the design and optimization of industrial PCB pyrolysis devices.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Add to Collection

Review Engineering, Environmental

A comprehensive review on the recycling of discarded printed circuit boards for resource recovery

Shaila Mir et al.

Summary: Printed circuit boards (PCBs) are crucial for electronic waste recycling. This review discusses various processes for extracting metals from PCBs and highlights the importance of pre-treatments and separation techniques. Selective recovery of high purity products and separate treatment of electronic waste and precious metal-rich components are emphasized.

RESOURCES CONSERVATION AND RECYCLING (2022)

Add to Collection

Review Engineering, Chemical

Recent Advances in the Decontamination and Upgrading of Waste Plastic Pyrolysis Products: An Overview

Salma Belbessai et al.

Summary: Extensive research has been conducted on the production of energy and valuable materials from plastic waste using pyrolysis. However, economically and technologically demonstrating the sustainability of this technology on an industrial scale remains a big challenge. Post-treatment methods and integrating pyrolysis units into conventional refineries are necessary to overcome these limitations.

PROCESSES (2022)

Add to Collection

Review Engineering, Chemical

Seawater desalination concentrate-a new frontier for sustainable mining of valuable minerals

Basel Abu Sharkh et al.

Summary: The ocean is considered a sustainable source of important materials for civilization. The expansion of seawater desalination brings the dream of utilizing commercially viable products from the ocean closer to reality. The economic use of desalination plant concentrate relies on the development of more economic separation and concentration technologies. Commercial development of non-NaCl components of desalination brine may depend on the market demand for NaCl.

NPJ CLEAN WATER (2022)

Add to Collection

Article Chemistry, Physical

Enhanced catalytic elimination of typical VOCs over ZnCoOx catalyst derived from in situ pyrolysis of ZnCo bimetallic zeolitic imidazolate frameworks

Yunlong Guo et al.

Summary: In this study, ZnCoOx catalysts were prepared using a metal ion doping strategy in order to eliminate volatile organic compounds (VOCs). Zn0.05CoOx with proper doping of Zn exhibited superior catalytic activity and durability. The presence of both BrOnsted and Lewis acid sites was beneficial for the degradation of cyclohexane, while only Lewis acid sites were responsible for the elimination of benzene and toluene. The chemical structure of the VOCs also played a role in their catalytic elimination.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Add to Collection

Article Engineering, Environmental

Generation Mechanism of Persistent Free Radicals in Lignocellulose-Derived Biochar: Roles of Reducible Carbonyls

Wenmei Tao et al.

Summary: The generation mechanism of persistent free radicals (PFRs) in biochar is closely related to its chemical structure. In this study, it was found that the formation of PFRs was significantly positively correlated with the presence of C=O and aromatic C=C structures. Reduction experiments demonstrated that reducible C=O functional groups were closely associated with the PFRs in biochar.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

Self-catalytic pyrolysis thermodynamics of waste printed circuit boards with co-existing metals

Shuyu Chen et al.

Summary: This study conducted thermogravimetric analysis and kinetic analysis, revealing the positive self-catalytic influence of co-existing metals in waste printed circuit boards (WPCBs) during pyrolysis. It provides a theoretical basis for understanding the catalytic influence of these metals during the pyrolysis process.

FRONTIERS OF ENVIRONMENTAL SCIENCE & ENGINEERING (2022)

Add to Collection

Review Chemistry, Multidisciplinary

A unified view on catalytic conversion of biomass and waste plastics

Kyungho Lee et al.

Summary: This article summarizes the catalytic conversion of biomass and waste plastics, with a focus on bond activation chemistry and catalyst design. Tracking the historical and recent developments, it is found that biomass and plastic have started to influence each other's fields, providing new insights and opportunities for existing technologies and future advancements.

NATURE REVIEWS CHEMISTRY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Steam gasification assisted pyrolysis directional de bromination of waste printed circuit boards and comprehensive utilization of products

Chunyu Li et al.

Summary: This paper investigates the pyrolysis process of waste printed circuit boards using steam atmosphere heating. The results show that this method can reduce the production of brominated products and toxic substances, while promoting the subsequent utilization of pyrolysis products.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Engineering, Environmental

The effect of microwave pyrolysis on product characteristics and bromine migration for a non-metallic printed circuit board

Kuo-Hsiung Lin et al.

Summary: This study investigates the effects of different operating conditions on the characteristics of pyrolysis products of non-metallic fractions of waste printed circuit boards (WPCBs) through microwave heating. The results show that a high temperature reduces oil yield, and an increase in NaOH catalyst promotes the cracking of oil into gas.

WASTE MANAGEMENT (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Forecast of future yield for printed circuit board resin waste generated from major household electrical and electronic equipment in China

Shuhao Zhang et al.

Summary: This study applies a stock-based model to forecast the future generation of PCB resin waste in China, finding that waste air conditioner, TV set, and washing machine are the major contributors. By 2035, at least 568.27 million tonnes of PCB resin waste will be produced, influenced by lifestyle, technological level, and population policy.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Environmental Sciences

Catalytic effect and mechanism of in-situ metals on pyrolysis of FR4 printed circuit boards: Insights from kinetics and products

Jingxin Liu et al.

Summary: The study showed that in-situ metals accelerated the production of light hydrocarbons and aromatic compounds, leading to a characteristic pyrolysis temperature of IB approximately 15 degrees lower than that of LP. The presence of metals lowered the energy barrier and increased the reaction extent, while inhibiting the formation of brominated volatiles.

CHEMOSPHERE (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Environmental-friendly recovery of non-metallic resources from waste printed circuit boards: A review

Ruijun Qiu et al.

Summary: The review focuses on the recent developments in recycling techniques for nonmetallic components in waste printed circuit boards, highlighting the importance of clean production, recycling efficiency, and economic value. The key to future development lies in removing harmful elements, enhancing environmental friendliness and value, and realizing valued-added preparation of materials through combined processes. The results are expected to guide future recycling processes and provide references for industrial development.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Environmental

Microwave-assisted catalytic pyrolysis of waste printed circuit boards, and migration and distribution of bromine

Tianhao Zhang et al.

Summary: Microwave-assisted pyrolysis of waste printed circuit boards was studied, showing that increasing temperature led to higher pyrolysis conversion rates and changes in oil composition. Addition of ZSM-5 and kaolin promoted recombination reactions of pyrolysis products, increasing certain aromatic compounds in the oil while reducing non-condensable gases. Additionally, higher pyrolysis temperatures enhanced transfer of bromine, leading to improved bromine fixation efficiency in pyrolysis residues.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Efficient bromine removal and metal recovery from waste printed circuit boards smelting flue dust by a two-stage leaching process

Jianfang Lyu et al.

Summary: A novel two-stage leaching method was developed for Br removal and metal recovery from waste printed circuit boards (WPCBs) smelting flue dust. The study systematically investigated the effects of leaching conditions on Cu, Zn, Pb and Sn extraction behavior and Br removal, and successfully achieved high debromination efficiency and metal extraction. The results indicate that this process is an effective and promising approach for the reutilization of WPCBs smelting flue dust.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Energy & Fuels

Mercury Removal from Flue Gas by Noncarbon Sorbents

Jianping Yang et al.

Summary: Mercury emissions from coal-fired power production pose a significant threat to human health and ecosystems, with activated carbons being the most explored sorbents for mercury removal. However, noncarbon sorbents have been developed as supplementary options due to the limitations of activated carbons. This review summarizes the recent progress on noncarbon sorbents for mercury removal and provides guidance for the design and exploration of new adsorbents.

ENERGY & FUELS (2021)

Add to Collection

Article Engineering, Environmental

Decomposition of polycarbonate/acrylonitrile-butadiene-styrene blends in e-waste packaging resin and recovery of debrominated carbon materials by supercritical water oxidation process

Kuo Li et al.

Summary: The PC/ABS blend is commonly used in the electronics industry as insulation material, and the supercritical water oxidation process can efficiently decompose and debrominate it, providing a green and sustainable disposal method for e-waste packaging resin.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

New insights into the debromination mechanism of non-metallic fractions of waste printed circuit boards via alkaline-enhanced subcritical water route

Ye Chen et al.

Summary: A method using an enhanced subcritical water process with alkaline additive was proposed for efficient removal of brominated epoxy resins from waste printed circuit boards. The alkaline additive contributes to the removal of bromine by destroying the structure of fiberglass, releasing the resins and facilitating debromination. This approach offers a mild and efficient method for debromination of WPCBs.

RESOURCES CONSERVATION AND RECYCLING (2021)

Add to Collection

Article Chemistry, Physical

A kinetic model for halogenation of the zinc content in franklinite

Mohammednoor Altarawneh et al.

Summary: EAFD is a major source of recyclable zinc, with the co-pyrolysis of EAFD with halogen-containing polymers being a potent approach for selective zinc extraction. The construction of a microkinetic model to account for the surface halogenation of zinc ions in franklinite into zinc halides is crucial for optimizing this process effectively. The model accurately illustrates the chemical phenomena involved in the mass loss curves in EAFD-PVC/BFRs formulations, providing valuable insights into the extraction of zinc from EAFD.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

NaOH-KOH Capillary Action Enhances the Pyrolysis and Debromination of Waste Printed Circuit Boards

Jiahui Wang et al.

Summary: Catalytic pyrolysis is a promising technology for energy recovery and bromide removal from nonmetals of waste printed circuit boards, with the capillary action of molten NaOH-KOH enhancing pyrolysis efficiency. Achieving maximum debromination efficiency and lower activation energy, the study offers insights for improving recycling of plastics by removing contamination.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Green & Sustainable Science & Technology

High-quality oil production via the catalytic conversion of printed circuit boards

Tae Uk Han et al.

Summary: This study investigated the catalytic pyrolysis of phenolic printed circuit boards using red mud and various zeolite catalysts, revealing that HBeta exhibited the highest debromination efficiency while HDeZSM-5 produced the most mono-aromatic hydrocarbons. Two-stage catalytic pyrolysis improved debromination efficiency, with the configuration of in-situ red mud/ex-situ HDeZSM-5 producing the most MAHs.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Environmental

Mitigation of bromine-containing products during pyrolysis of polycarbonate-based tetrabromobisphenol A in the presence of copper (I) oxide

Sylwia Oleszek et al.

Summary: The study found that in the presence of Cu2O, organo-bromine products were most likely involved in Ullman-type coupling reactions, leading to early cross-linking of the polymer network that efficiently hinders their vaporization. HBr in the gas fraction was suppressed due to effective fixation of bromine in residue in the form of CuBr.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Recovering full metallic resources from waste printed circuit boards: A refined review

Ruijun Qiu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Environmental

Swelling-enhanced catalytic degradation of brominated epoxy resin in waste printed circuit boards by subcritical acetic acid under mild conditions

Mingfei Xing et al.

WASTE MANAGEMENT (2020)

Add to Collection

Article Environmental Sciences

Leaching behavior of Sb and Br from E-waste flame retardant plastics

Lu Zhan et al.

CHEMOSPHERE (2020)

Add to Collection

Article Engineering, Environmental

Synergistic effects of catalytic co-pyrolysis of macroalgae with waste plastics

Shannan Xu et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Add to Collection

Article Multidisciplinary Sciences

Mapping anthropogenic mineral generation in China and its implications for a circular economy

Xianlai Zeng et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Environmental Sciences

Catalytic performance and debromination of Fe-Ni bimetallic MCM-41 catalyst for the two-stage pyrolysis of waste computer casing plastic

Tao Chen et al.

CHEMOSPHERE (2020)

Add to Collection

Article Engineering, Environmental

A novel approach of accurately rationing adsorbent for capturing pollutants via chemistry calculation: Rationing the mass of CaCO3 to capture Br-containing substances in the pyrolysis of nonmetallic particles of waste printed circuit boards

Baojia Qin et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Environmental Sciences

Co-pyrolysis of polyethylene with products from thermal decomposition of brominated flame retardants

Mohammednoor Altarawneh et al.

CHEMOSPHERE (2020)

Add to Collection

Article Engineering, Environmental

New Mixed Bromine/Chlorine Transformation Products of Tetrabromobisphenol A: Synthesis and Identification in Dust Samples from an E-Waste Dismantling Site

Jing Liu et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Engineering, Environmental

Debromination of tetrabromobisphenol A in aqueous amine solutions under hydrothermal conditions

Junichi Sakabe et al.

JOURNAL OF WATER PROCESS ENGINEERING (2020)

Add to Collection

Review Engineering, Environmental

CONCENTRATIONS OF BROMINATED FLAME RETARDANTS IN PLASTICS OF ELECTRICAL AND ELECTRONIC EQUIPMENT, VEHICLES, CONSTRUCTION, TEXTILES AND NON-FOOD PACKAGING: A REVIEW OF OCCURRENCE AND MANAGEMENT

Pierre Hennebert

DETRITUS (2020)

Add to Collection

Article Engineering, Environmental

Performance analysis and fate of bromine in a single screw reactor for pyrolysis of waste electrical and electronic equipment (WEEE)

Panagiotis Evangelopoulos et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Add to Collection

Article Engineering, Environmental

Debrominated high quality oil production by the two-step catalytic pyrolysis of phenolic printed circuit boards (PPCB) using natural clays and HY

Young-Kwon Park et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Bromine Recycling in the Chemical Industry - An Example of Circular Economy

Francis Pilloud et al.

CHIMIA (2019)

Add to Collection

Review Green & Sustainable Science & Technology

A review of current progress of supercritical fluid technologies for e-waste treatment

Kuo Li et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Engineering, Environmental

Effect of steam-iron reaction on product characteristics and debromination during pyrolysis of epoxy-printed circuit boards

Chuan Ma et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection

Review Environmental Sciences

Towards the effective E-waste management in Bangladesh: a review

Mahadi Hasan Masud et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Thermodynamic Analysis on the Oxidative Pyrolytic Treatment of Electric Arc Furnace Dust-TBBA Blends

Mohammad Al-Harahsheh et al.

OXIDATION OF METALS (2019)

Add to Collection

Review Thermodynamics

Thermal decomposition of brominated flame retardants (BFRs): Products and mechanisms

Mohammednoor Altarawneh et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Kinetic and Mechanism Studies on Pyrolysis of Printed Circuit Boards in the Absence and Presence of Copper

Wei Liu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Review Engineering, Environmental

Treatments of electric arc furnace dust and halogenated plastic wastes: A review

Mohammad Al-harahsheh et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal Analysis on the Pyrolysis of Tetrabromobisphenol A and Electric Arc Furnace Dust Mixtures

Mohammad Al-Harahsheh et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)

Add to Collection

Article Engineering, Environmental

Effects of Cu and CuO on the preparation of activated carbon from waste circuit boards by H3PO4 activation

Yujiao Kan et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Engineering, Environmental

Characteristics of Polybrominated Diphenyl Ethers Released from Thermal Treatment and Open Burning of E-Waste

Ting-Yu Li et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Thermochemical treatment of non-metallic residues from waste printed circuit board: Pyrolysis vs. combustion

Yafei Shen et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Green & Sustainable Science & Technology

A new approach for blending waste plastics processing: Superabsorbent resin synthesis

Jun-Ping Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Environmental Sciences

Fungal bioleaching of WPCBs using Aspergillus niger: Observation, optimization and kinetics

Fariborz Faraji et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2018)

Add to Collection

Article Engineering, Environmental

The debrominated and lightweight oil generated from two stage pyrolysis of WPCBs by using compound chemical additives

Ziwei Ye et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)

Add to Collection

Article Engineering, Environmental

Effect of chemical pretreatment on pyrolysis of non-metallic fraction recycled from waste printed circuit boards

Yafei Shen

WASTE MANAGEMENT (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Co-pyrolysis of E-Waste Nonmetallic Residues with Biowastes

Yafei Shen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Review Engineering, Environmental

Hydrometallurgical recovery of metals from waste printed circuit boards (WPCBs): Current status and perspectives - A review

Huan Li et al.

RESOURCES CONSERVATION AND RECYCLING (2018)

Add to Collection

Article Multidisciplinary Sciences

A cocoon silk chemistry strategy to ultrathin N-doped carbon nanosheet with metal single-site catalysts

Youqi Zhu et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Environmental Sciences

Thermal decomposition of tetrabromobisphenol-A containing printed circuit boards in the presence of calcium hydroxide

Shogo Kumagai et al.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2017)

Add to Collection

Article Chemistry, Applied

Catalytic pyrolysis of flame retarded high impact polystyrene over various solid acid catalysts

Chuan Ma et al.

FUEL PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Catalytic co-pyrolysis of epoxy-printed circuit board and plastics over HZSM-5 and HY

Young-Min Kim et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Polymer Science

Pyrolysis-catalytic upgrading of brominated high Impact polystyrene over Fe and Ni modified catalysts: Influence of HZSM-5 and MCM-41 catalysts

Chuan Ma et al.

POLYMER DEGRADATION AND STABILITY (2017)

Add to Collection

Article Environmental Sciences

Emissions of brominated compounds and polycyclic aromatic hydrocarbons during pyrolysis of E-waste debrominated in subcritical water

Aurora Soler et al.

CHEMOSPHERE (2017)

Add to Collection

Article Engineering, Environmental

Environmental emission analysis of a waste printed circuit board-derived adsorbent production process

Chao Ning et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Thermodynamics

Synergistic effect on thermal behavior and char morphology analysis during co-pyrolysis of paulownia wood blended with different plastics waste

Lin Chen et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Energy & Fuels

Influence of Zeolites and Mesoporous Catalysts on Catalytic Pyrolysis of Brominated Acrylonitrile-Butadiene-Styrene (Br-ABS)

Chuan Ma et al.

ENERGY & FUELS (2016)

Add to Collection

Article Chemistry, Physical

Thermal Recycling of Brominated Flame Retardants with Fe2O3

Mohammednoor Altarawneh et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2016)

Add to Collection

Review Green & Sustainable Science & Technology

Chemical recycling of brominated flame retarded plastics from e-waste for clean fuels production: A review

Chuan Ma et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection

Article Engineering, Environmental

Advanced degradation of brominated epoxy resin and simultaneous transformation of glass fiber from waste printed circuit boards by improved supercritical water oxidation processes

Kang Liu et al.

WASTE MANAGEMENT (2016)

Add to Collection

Review Engineering, Environmental

Control-Alt-Delete: Rebooting Solutions for the E-Waste Problem

Jinhui Li et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)

Add to Collection

Review Engineering, Environmental

Disposing and Recycling Waste Printed Circuit Boards: Disconnecting, Resource Recovery, and Pollution Control

Jianbo Wang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)

Add to Collection

Article Chemistry, Applied

Effect of polypropylene on the pyrolysis of flame retarded high impact polystyrene

Chuan Ma et al.

FUEL PROCESSING TECHNOLOGY (2015)

Add to Collection

Article Engineering, Environmental

The effects of activated Al2O3 on the recycling of light oil from the catalytic pyrolysis of waste printed circuit boards

Yi Wang et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of pyrolysis temperature and catalyst on production of bio-oil and bio-char from avocado seeds

Halil Durak et al.

RESEARCH ON CHEMICAL INTERMEDIATES (2015)

Add to Collection

Review Engineering, Environmental

State-of-the-Art of Recycling E-Wastes by Vacuum Metallurgy Separation

Lu Zhan et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2014)

Add to Collection

Review Engineering, Environmental

Recycling of non-metallic fractions from waste electrical and electronic equipment (WEEE): A review

Ruixue Wang et al.

WASTE MANAGEMENT (2014)

Add to Collection

Article Engineering, Environmental

Degradation of brominated epoxy resin and metal recovery from waste printed circuit boards through batch sub/supercritical water treatments

Mingfei Xing et al.

CHEMICAL ENGINEERING JOURNAL (2013)

Add to Collection

Article Engineering, Environmental

Volatile Organic Compounds and Metal Leaching from Composite Products Made from Fiberglass-Resin Portion of Printed Circuit Board Waste

Jie Guo et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2012)

Add to Collection

Review Engineering, Environmental

Response to Waste Electrical and Electronic Equipments in China: Legislation, recycling system, and advanced integrated process

Lei Zhou et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2012)

Add to Collection

Article Chemistry, Applied

Thermal degradation of acrylonitrile-butadiene-styrene (ABS) containing flame retardants using a fluidized bed reactor: The effects of Ca-based additives on halogen removal

Su-Hwa Jung et al.

FUEL PROCESSING TECHNOLOGY (2012)

Add to Collection

Article Engineering, Environmental

Metals recovering from waste printed circuit boards (WPCBs) using molten salts

L. Flandinet et al.

JOURNAL OF HAZARDOUS MATERIALS (2012)

Add to Collection

Article Chemistry, Analytical

Thermal hydrodehalogenation of 2,4-dibromophenol by polymeric materials

Maria Paola Luda et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2011)

Add to Collection

Article Engineering, Environmental

Conversion of bromine during thermal decomposition of printed circuit boards at high temperature

Yu-qi Jin et al.

JOURNAL OF HAZARDOUS MATERIALS (2011)

Add to Collection

Article Engineering, Environmental

Study of the Transference Rules for Bromine in Waste Printed Circuit Boards during Microwave-Induced Pyrolysis

Jing Sun et al.

JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION (2011)

Add to Collection

Article Chemistry, Analytical

Effect of flame retardants and Sb2O3 synergist on the thermal decomposition of high-impact polystyrene and on its debromination by ammonia treatment

Mihai Brebu et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2007)

Add to Collection

Article Biochemical Research Methods

Catalytic destruction of brominated aromatic compounds studied in a catalyst microbed coupled to gas chromatography/mass spectrometry

Marianne Blazso et al.

JOURNAL OF CHROMATOGRAPHY A (2006)

Add to Collection

Article Engineering, Environmental

Pyrolysis study of halogen-containing aromatics reflecting reactions with polypropylene in a posttreatment decontamination process

AI Balabanovich et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2005)

Add to Collection

Article Green & Sustainable Science & Technology

Polypropylene as a reductive agent for dehalogenation of brominated organic compounds

A Hornung et al.

JOURNAL OF CLEANER PRODUCTION (2005)

Add to Collection

Article Chemistry, Analytical

Pyrolysis studies of PP/PE/PS/PVC/HIPS-Br plastics mixed with PET and dehalogenation (Br, Cl) of the liquid products

T Bhaskar et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2004)

Add to Collection

Article Environmental Sciences

Fate of bromine in pyrolysis of printed circuit board wastes

YC Chien et al.

CHEMOSPHERE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.