☆ 4.7 Article

Influence of moisture content and intermediate principal stress on cracking behavior of sandstone subjected to true triaxial unloading conditions

ENGINEERING FRACTURE MECHANICS (2023)

Related references

Note: Only part of the references are listed.

Article Green & Sustainable Science & Technology

Application of a Combined FEM/DEM Approach for Teaching a Deep Rock Mass Mechanics Course

Fan Feng et al.

Summary: This article introduces a professional course in deep rock mass mechanics offered by mining universities, covering topics such as geological structure, mechanical properties, strength theory, stability analysis, and application of rock mechanics in mining engineering. To overcome the limitations of traditional teaching methods, the authors proposed integrating a combined FEM/DEM approach into the course. Through the analysis of rock behaviors and failure process using ELFEN software, the results show that this approach is feasible and reasonable, with advantages such as strong intuition, high reliability, time and labor savings, and low cost. Additionally, it stimulates students' interests, deepens their understanding, and cultivates their innovative abilities.

SUSTAINABILITY (2023)

Add to Collection

Article Engineering, Geological

Dynamic behaviors of water-saturated and frozen sandstone subjected to freeze-thaw cycles

Feng Gao et al.

Summary: This study investigates the dynamic properties of sandstone under water-saturated and frozen conditions in high-altitude cold areas. The research provides insights into the influence of freeze-thaw cycles on the dynamic compressive strength and offers a prediction equation for the dynamic strength based on the strain rate. The study also examines the mesoscopic mechanism of the strength evolution in water-saturated and frozen sandstone.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2023)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Shear behavior and fracturing mechanism of intact sandstone affected by spatio-temporally varying water

Xin Liang et al.

Summary: This study investigates the effects of water on the shear behavior of sandstone through experiments and numerical simulations. The results show that an increase in humidity significantly decreases the shear strength and stiffness of the sandstone. The distribution of humidity affects the heterogeneity of the rock material and the stress field, influencing the location of crack formation.

COMPUTERS AND GEOTECHNICS (2023)

Add to Collection

Article Thermodynamics

Characterizing clay textures and their impact on the reservoir using deep learning and Lattice-Boltzmann simulation applied to SEM images

Naser Golsanami et al.

Summary: This study provides a detailed quantitative characterization of clays in hydrocarbon reservoirs using deep learning and SEM images, and investigates the impact of clays on reservoir fluid flow. The results show that clays can significantly reduce reservoir porosity and permeability, shedding new light on the detailed impacts of clay minerals on reservoir quality.

ENERGY (2022)

Add to Collection

Article Engineering, Geological

Digital Evaluation of Micro-Pore Water Effects on Mechanical and Damage Characteristics of Sandstone Subjected to Uniaxial, Cyclic Loading-Unloading Compression by 3D Reconstruction Technique

Xiao-Ping Zhou et al.

Summary: The presence of water in micro-pores significantly influences the mechanical and damage characteristics of rocks. Experimental and numerical simulation results show that with increasing water content, the uniaxial compressive strength of sandstone decreases and the pore size changes accordingly.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

Add to Collection

Article Engineering, Geological

Effect of water contents and initial crack lengths on mechanical properties and failure modes of pre-cracked compacted clay under uniaxial compression

Taiki Shimbo et al.

Summary: This study investigated the effects of water content and initial crack length on the mechanical properties and failure modes of pre-cracked compacted clay under uniaxial compression. The results showed that the unconfined compressive strength decreased with longer initial crack length or higher water content. On the other hand, the deformation modulus was influenced by water content but not by initial crack length. The mode II fracture toughness (K-IIC) was found to depend on water content and empirical correlation formulas were obtained. The failure modes of the compacted clay were classified into five types, with some specimens showing the disappearance of wing cracks and the presence of only secondary cracks due to contact and gliding of the crack surface by shear stress.

ENGINEERING GEOLOGY (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Failure process and characteristics of three-dimensional high-stress circular tunnel under saturated water content

Xue-feng Si et al.

Summary: This study investigates the influence of saturated water content on the failure process and characteristics of a circular tunnel in surrounding rocks through true-triaxial compression tests on cubic granite samples. The results show that water can reduce the severity of rock failure, which has important implications for the prevention and control of rockbursts in deep underground engineering.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2022)

Add to Collection

Article Construction & Building Technology

In-situ methods for the TBM dismantling in a long-distance and deep-buried tunnel: Case study of Xinjiang water conveyance tunnel

Wei-Qiang Xie et al.

Summary: With the rapid development of transportation, water conservancy, and energy exploitation, more tunnels are being excavated by tunnel boring machines (TBMs). It is crucial to provide proper in-situ methods for TBM dismantling in long-distance and deep-buried tunnels. This study explores potential in-situ methods for TBM dismantling based on a water conveyance project in Xinjiang province, China, and recommends the optimal in-situ method.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2022)

Add to Collection

Article Energy & Fuels

NMR-Based Study of the Pore Types' Contribution to the Elastic Response of the Reservoir Rock

Naser Golsanami et al.

Summary: Seismic data and NMR data are reliable sources of information in hydrocarbon reservoir engineering. This study explored the influence of different pore types on elastic wave velocity and synthesized NMR T-2 curves using seismic attributes. Statistical ensembles were found to be reliable tools for petrophysical characterization of hydrocarbon reservoirs.

ENERGIES (2021)

Add to Collection

Article Construction & Building Technology

Morphological features and fractography analysis for in situ spalling in the China Jinping underground laboratory with a 2400 m burial depth

Quan Jiang et al.

Summary: This study analyzed the morphology and failure mechanism of brittle spalling in hard rock under high geostress conditions through collecting and analyzing marble spalling samples. The results deepened the understanding of the in-situ spalling mechanism and discussed the effect of mineral particle size on the roughness of spalling slices in surrounding rocks.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)

Add to Collection

Article Engineering, Geological

Influence of Water Saturation and Real-Time Testing Temperature on Mechanical Behavior of Sandstone Under Conventional Triaxial Compression

Sheng-Qi Yang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

Add to Collection

Article Engineering, Geological

Cracking mechanism and strength criteria evaluation of granite affected by intermediate principal stresses subjected to unloading stress state

Fan Feng et al.

Summary: Experimental tests on Miluo granite specimens reveal that as the intermediate principal stress σ2 increases, the failure mode shifts from shear to slabbing, exacerbating the extensional cracks. Analyzed through various methods, the peak unloading strength in true-triaxial conditions exhibits an initial increase followed by a decrease with increasing σ2.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

Add to Collection

Article Engineering, Geological

Evolution of the mechanical and strength parameters of hard rocks in the true triaxial cyclic loading and unloading tests

Xia-Ting Feng et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Add to Collection

Article Engineering, Geological

Failure properties of cubic granite, marble, and sandstone specimens under true triaxial stress

Kun Du et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Dynamic tensile strength and failure mechanisms of thermally treated sandstone under dry and water-saturated conditions

Pin Wang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)

Add to Collection

Article Engineering, Geological

Influence of water on mechanical behavior of surrounding rock in hard-rock tunnels: An experimental simulation

Yong Luo

ENGINEERING GEOLOGY (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Tunnel failure in hard rock with multiple weak planes due to excavation unloading of in-situ stress

Shao-jie Chen et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2020)

Add to Collection

Article Engineering, Geological

Water saturation effects on dynamic fracture behavior of sandstone

Zilong Zhou et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)

Add to Collection

Article Engineering, Geological

Numerical Investigation of Hard Rock Strength and Fracturing under Polyaxial Compression Based on Mogi-Coulomb Failure Criterion

Fan Feng et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2019)

Add to Collection

Article Mechanics

Effects of water content on fracture and mechanical behavior of sandstone with a low clay mineral content

Zilong Zhou et al.

ENGINEERING FRACTURE MECHANICS (2018)

Add to Collection

Article Engineering, Geological

Failure Characteristics of Granite Influenced by Sample Height-to-Width Ratios and Intermediate Principal Stress Under True-Triaxial Unloading Conditions

Xibing Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

Add to Collection

Article Construction & Building Technology

Evaluation of current coal burst control techniques and development of a coal burst management framework

Chunchen Wei et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)

Add to Collection

Article Mechanics

Effect of the intermediate principal stress on 3-D crack growth

Hongyu Wang et al.

ENGINEERING FRACTURE MECHANICS (2018)

Add to Collection

Article Engineering, Geological

Effects of Wetting and Cyclic Wetting-Drying on Tensile Strength of Sandstone with a Low Clay Mineral Content

Zhihong Zhao et al.

ROCK MECHANICS AND ROCK ENGINEERING (2017)

Add to Collection

Article Engineering, Geological

Establishing Empirical Relationships for the Effects of Water Content on the Mechanical Behavior of Gosford Sandstone

Hossein Masoumi et al.

ROCK MECHANICS AND ROCK ENGINEERING (2017)

Add to Collection

Review Engineering, Geological

Water effects on rock strength and stiffness degradation

Louis Ngai Yuen Wong et al.

ACTA GEOTECHNICA (2016)

Add to Collection

Article Mechanics

Effect of cyclic wetting and drying on the pure mode II fracture toughness of sandstone

Wen Hua et al.

ENGINEERING FRACTURE MECHANICS (2016)

Add to Collection

Article Engineering, Multidisciplinary

An experimental investigation on acoustic emission characteristics of sandstone rockburst with different moisture contents

XiaoMing Sun et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2016)

Add to Collection

Article Geochemistry & Geophysics

Failure characteristics of two porous sandstones subjected to true triaxial stresses

Xiaodong Ma et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2016)

Add to Collection

Article Engineering, Geological

Rockburst laboratory tests database - Application of data mining techniques

Manchao He et al.

ENGINEERING GEOLOGY (2015)

Add to Collection

Article Engineering, Geological

True Triaxial Strength and Failure Modes of Cubic Rock Specimens with Unloading the Minor Principal Stress

Xibing Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Failure properties of rocks in true triaxial unloading compressive test

Kun Du et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)

Add to Collection

Article Engineering, Geological

Influence of Unloading Rate on the Strainburst Characteristics of Beishan Granite Under True-Triaxial Unloading Conditions

X. G. Zhao et al.

ROCK MECHANICS AND ROCK ENGINEERING (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Creep experiment and rheological model of deep saturated rock

Lang Liu et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)

Add to Collection

Article Engineering, Geological

Influence of water content and anisotropy on the strength and deformability of low porosity meta-sedimentary rocks under triaxial compression

Diyuan Li et al.

ENGINEERING GEOLOGY (2012)

Add to Collection

Article Mechanics

Classification of cracking mode in concrete by acoustic emission parameters

Dimitrios G. Aggelis

MECHANICS RESEARCH COMMUNICATIONS (2011)

Add to Collection

Article Engineering, Geological

Influence of Sample Height-to-Width Ratios on Failure Mode for Rectangular Prism Samples of Hard Rock Loaded In Uniaxial Compression

Diyuan Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2011)

Add to Collection

Article Engineering, Geological

Water-induced variations in mechanical properties of clay-bearing rocks

Z. A. Erguler et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)

Add to Collection

Article Engineering, Geological

Influence of intermediate principal stress on rock fracturing and strength near excavation boundaries - Insight from numerical modeling

M. Cai

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2008)

Add to Collection

Article Geochemistry & Geophysics

Failure mode and weakening effect of water on sandstone

P Baud et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2000)

Add to Collection

Article Engineering, Geological

A new true triaxial cell for testing mechanical properties of rock, and its use to determine rock strength and deformability of Westerly granite

B Haimson et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.